Create additional field in sales order item and copy to purchase order item

Dear SAP Gurus,
I am hoping that someone could help me by providing me with how to implement the following 2 requirements in the SD order and in the purchase order.
1. I am wanting to add a custom field to the SD sales order item copying a value from the vendor customer master.
2. I then want to add a custom field to the purchase order item and copy the value from my custom field in 1. to this new custom field..
Can you please advise how I would go about implementing the above requirements?  I am assuming that there are exits to allow me to implement these 2 requirements.
Many thanks
Henry

Hi,
For the first requirement you can use the USEREXIT_MOVE_FIELD_TO_VBAP in report MV45AFZZ.
For the second, as I think that you will create a RFQ you can try to use the enhancement MEREQ001.
Regards,
Eduardo

Similar Messages

  • How to configure Sales order item text copy to Purchase requisition item

    Hi,
    How to configure sales order item text copy to Purchase requisition text then copy to PO item text.
    Regards
    Jack

    Hi Rajesha,
    Thanks for your reply, some of the items in sales order are procured externally by us and our customer maintains text related to price and specification in the item details of the sales order, MRP creates planned order for these materials and these planned orders are always converted in pur requisition, we want that text from the sales order item details should be copied in to the purchase requisitions converted from planned orders.
    is there any user exit which can be called at the time of saving a purchase req or user exit for converting planned order in to pur req.?
    if there is any such exit available, then I think I can read the pegged requirement of the planned order where sales order item will be found then read the text in the item then copy this text in pur req then save pur req may work.
    but this will be a bulky development, please let me know if we can shorten the development.
    Thanks again
    Anand

  • Item texts copied from purchase order to delivery

    Hi Sales Gurus,
    I am facing the following issue.
    In the intercompany process we create the delivery based on purchased order.
    Our need is to copy the item texts of the purchase order to the item texts of the delivery.
    How can i do that?
    Thank you
    João Fernandes

    João,
    Transaction VOTXN, Delivery, Item.
    Then assign a specific text procedure and Access Sequence with the appropriate text ids.
    Regards,
    (Boa tarde)
    Sérgio

  • Deleted item and message in purchase order

    Hi !
    When I delete a item in a purchase order (ME22N), this deleted item doesn't appear in the message (category message = NEU). How make to appear the deleted item ?
    thanks a lot
    Joel

    Hi,
    This is a general practice that once a item is deleted it will not be shown in the message as it has no relance further which a vendor need not know. Accordingly the print programme has been configured.Also there is no necessity of appearnce of the deleted item in the print out as what purpose it will serve. In any case the deletion record will be there in the system to trace such changes. If this need to be available in the message than the abap team should programme the print pogramme accordingly.
    Dhruba

  • Deleting AR Order line after copying to Purchase order

    Hello,
    It seems to be that after transfering a orderline in a Sale order and activating a direct purchase order of that line, it is possible to delete the orderline. Is there a way to avoid this, because otherwise a item is delivered by the supplier that the customer has revoked in his order.
    Thanks,
    Freek

    Hi
    I think wha you are looking is
    When You create a PO based on SO , the item is allocated for particular SO and you expect The link is there all the way to A/R invoice .
    However SAP by default donot have that function by default . Even though it creates a link by base ref but it doesn't allocate that item  for particular SO . So you can do anything you want in AR or AP side even though that PO is based on SO.
    Thank you
    Bishal

  • Sales Order - Using Item Category 'TAB' - Individual Purchase Order

    All,
    I am configuring for the first time utilizing Sales Document Item category "TAB" - Individual Purchase Order.  I have a few questions:
    Is there a best practice configuration guide specific for this process?  I have found the 'third party' document/best practice, but nothing so far  on "individual purchase order from sales order'. 
    Is there a way to default Purchase Order Type "UB" stock transfer from the Purchase Requisition NB?  I thought this could be done based on the schedule line "CB" configuration, changing the 'item category' to 7 stock transfer, then this would carry into the mapping for purchase requisition type NB/item category stock transfer to purchase order type UB/item category stock transfer.  However, when I set '7' on the schedule line CB, I then receive a hard error when creating my purchase req to set the supplying plant.  I have more than one supplying plant, so I'm not sure if setting the '7' is the right setting for this process.  From what I've been able to find for documentation, the item category of the schedule line should be set to '0' standard.
    When I perform the post Goods Issue 601 of Special Stock "E" - to the customer (once the stock has been received into the right plant), the system is not creating an Accounting/FI Document to relieve the inventory and charge cost of goods sold.  I have reviewed automatic account assignment entries and these appear correct for 601 E.  Are there special settings for special stock "E" that I need to consider. 
    If you cannot answer all of these questions, but can answer one of them, I am most interested in teh last question above. 
    Regards,
    Sandra Miner

    Hi Reazuddin,
    What I don't understand is why:
    if I don't create PO --> I can create Outobund Delivery in Individual Purchase Order but if I create PO (not MIGO) I cannot create OBD in IPO.  (Note: in both cases I agree PGI is not possible)
    The flowchart is: Sale Order (IPO) --> Purchase Requisition --> Purchase Order (PO) --> MIGO (inbound delivery) --> MIRO (Vendor invoice verification) --> Outbound delivery ( delivery [OBD] + picking + posting[PGI]) --> Sales Invoice
    As per your comments:
    System will not stop you to create delivery, though you customize delivery item cat: as Check min qtty "0" - error message. because system checks for PGI qtty, but not the delivery qtty.
    But then in the case I create Sale order (IPO) + PO (without MIGO) --> the system should not stop me executing Outbound Delivery. It should stop me only if I execute Posting goods issue. But actually in this case, the system is stopping me at outbound delivery.
    I agree with Posting Goods Issue behaviour. It is logical in the following cases:
    Only Sale order (IPO) created --> PGI is not possible
    Sale Order (IPO) created + PO created --> PGI is not possible
    Sale Order (IPO) created + PO created + MIGO executed (inbound) --> PGI is possible.
    Thank you very much for your feedback.
    Regards,
    Alberto Ramos.

  • Sales order items refers to different purchase order items

    Hello SAP Experts,
    I have a requirement where sales order items are referring to different purchase order items. For eg. Item 1 from SO exist in PO no. 11 where as item 2 from SO exist in PO 12. Transaction MIRO allows to post items belonging to different purchase orders, but we have to do invoice verification using IDOCs. In EDI process, it is taking PO number from the SO header and not from the SO items.
    Can anyone suggest how to get PO number from the SO item and not from the SO header.
    Thanks.

    Not possible to create sales order with reference to PO.
    but if to capture cost, you can consider adding cost to customer's invoice.
    e.g.
    SO -> PO -Inb/IR -> GR -> OB -> Inv(Add here)
    to add in that invoice, its either manual or through automatic condition.

  • Add field to item position overview of Purchase Order

    Dear SRM gurus,
    I'm working on a change request of a customer.
    They want to add a field to the item overview position of Purchase Orders.
    They are using SRM 4.0 in Extended Classic Scenario.
    When displaying the list of Purchase Orders only the headers are shown. When clicking on a header the item positions are shown below the header. In this item overview the customer wants a field to be added.
    The field to be added is the GL Account. The customer wants this field to be visible before opening the item of the Purchase Order.
    We already know which screen should be changed to display the field.
    The screen is SAPLBBP_PO_UI_ITS and screen number 4000.
    Is it possible to add fields to this screen?
    If it is possible, how can this be done?
    Thank you in advance for your support,
    Best regards,
    Jean-Pierre

    Is there a solution yet?
    At my company they also want  to add a column to block Items in Shopping Cart.
    The structures mentioned in the note are all in the item details but not in the overview.
    regards,
    Wim

  • How can I create a sales order with reference to a purchase order?

    How can I create a sales order with reference to a purchase order?
    Thanks in advance...

    Hello,
    you can't create a sales order with reference to a purchase order. You can input customer PO nuber in the sales order Purchase Order number filed.
    Prase.

  • Maximum open item % and no of days open item in credit management

    Hi
    Can any body explain how  works " Maximum open item % and no of days open item " after checked in ova8  with examples.in credit management.
    regards

    hello, friend.
    maximum open items is helpful for you if the customer is still within credit limit but has overdue open items.
    let's say your customer has a credit limit of $100,000.00.  and you set in OVA8 for maximum of 20% or $20,000.00.
    now let's say your customer's total exposure is $43,699.00, which is still within credit limit.  however, out of this, $21,245.00 is over the credit terms of 14 days.  now if you set "1" in days in OVA8, 1 day after overdue the system will either block the newly processed sales order or issue a warning, depending on OVA8 settings.
    regards.

  • User exit to change item level data in purchase order

    Hi,
    Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirment is
    For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked).   now i cant use ME_PROCESS_PO_CUST  because process_item wont get triggered if there is no change in itemlevel data.
    Regards,
    Rahul

    Hi Rahul,
    Probably EXIT_SAPLMEKO_002.
    hope it helps,
    Edgar

  • Help - User exit to change item level data in Purchase Order

    Hi,
    Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirement is For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked).   now i cant use ME_PROCESS_PO_CUST  because process_item wont get triggered if there is no change in item level data.
    Thanks,
    Rahul

    Hi Rahul,
    Probably EXIT_SAPLMEKO_002.
    hope it helps,
    Edgar

  • Item text in Purchase request is not copied to Purchase orders.why?

    que1:Item text in Purchase request is not copied to Purchase orders.why?
    que.2:where this item text is get stored, i mean to ask which table.
    please reply asp.
    SAP Learner.

    hi
    >que1:Item text in Purchase request is not copied to Purchase orders.why?
    spro >mm>Purchase Order>Texts for Purchase Orders>Define copying rules for item(line item) texts.
    spro >mm>Purchase Order>Texts for Purchase Orders> Define copying rules for header text.
    >que.2:where this item text is get stored, i mean to ask which table.
    use function module  READ_TEXT and table STXL
    regards
    KI

  • Central Sales Tax Amount with respect to Purchase Orders

    Is there any way to get Central Sales Tax amount with respect to Purchase Order Numbers. I need this for report.
    Pls get me table numbers from which i can extract

    Hi,
    Refer report J1I2 - Sales Tax Register
    Here in the selection screen, enter Tax code, CST Condition type, etc...
    Also refer report S_ALR_87012357 - Advance Return for Tax on Sales/Purchases

  • Purchase reqisition header note not copying to Purchase order header Note

    Hi
    can you help me any body  regarding this issue
    "purchase reqisition HEADER NOTE  not copying to Purchase order HEADER NOTE " .
    it is very urgent issue for me please.
    Thanks
    Madhu.

    hi madhu
    ans1.)  in ECC 6 it is not possible to copy PR text to PO text , becouse the only way to convert PR into PO is document flow and document flow will show you only line items.
    ans 2 )  PR text is used for maintaining text related to PR genration information , like which MRP run is giving this PR or other information which user wants to maintain .
    ans3.) if user have done same thing earliar then it may possible that he was using 4.7 or ECC 5  .
    let me konw what user is saying .
    regards
    ravikant dewangan

Maybe you are looking for