Create admin iview for a form

hello,
i've created multiple forms for different pages
my question is how do i make an admin iview in witch to have the posibility to use only one form?
thx
irina

Hi Irina,
You can restrict the forms that are available to the user on folder level:
http://help.sap.com/saphelp_nw04/helpdata/en/8d/2813418366f023e10000000a155106/content.htm
By working with a search iView you can have different folders where different kind of forms can be used, but at the end show the users all forms.
Hope this helps,
Robert

Similar Messages

Creating a iview for XML Form builder Edit Form

Dear Experts
I have created an XML Form builder application which has Edit from,Renderlist and Show form. I able to create a datafile in by going to content manager. My requirement is to create an iview for Edit form so that i can assignt he ivew to end user to fill this form. I dont want to give content admin to end user.
I need to create an ivew to XML Form builder Edit Form
Regards
Noel

Hi,
Now I'm confused,what do you mean with create new data? Are users editing existing documents
(as if they go to a document example.xml > edit) or they are creating new documents (as if they go
on folder > new > forms)?
The problem is, in both cases a user would need read/write permissions.
The normal flow content (data) is created in KM is as follows:
1. user is assigned to a role
2. role contains KM Navigation iView
3. KM Navigation iView executes com.sap.km.cm.navigation component
4. user chooses New > Form UI command (edit_xml_forms)
5. edit_xml_forms UI command executes its code (com.sapportals.wcm.rendering.uicommand.cm.UIXMLFormsCreateCommand) and open xml edit for the user
6. user fill the form and click Save, form is created into folder
For what I understood so far, your requirement basically asks you to go directly to step 5, it is
possible to pass a URL that goes directly to step 5, the UI command button, but if you do that
you won't have a context, so chances that it will work are slim, since a context is required to
fill the parameters asked by the app (like folder, user, permissions, etc). Even though, in some cases you can
still pass the parameters via post in the URL but you must know which service/parameters the
app asks for it, also a URL is static...
That was the create scenario, I think it's more cons than pros, users would still be
able to bypass the URL iView created for that, I'd suggest evaluating again if it's really
a problem having users access cm to manage data
kind regards,
Rafael

Error writing output with iview for xml form builder

Hi,
I created a Xml Form Builder's project in which I developed an "Edit" and "ListEdit" sheet.
I also created an iview for theese in which the code link is:"com.sap.km.cm.xmlform",and the field for Style Sheet for List and for single item are set up correctly,but when I tried the preview the following error message happened:
com.inqmy.lib.xsl.xslt.XSLOutputException: Error writing output. -> org.w3c.dom.DOMException: Root Element is already present, cannot be appended as a child.
could someone help me?
thank's a lot!
Nick.

Hi,
Now I'm confused,what do you mean with create new data? Are users editing existing documents
(as if they go to a document example.xml > edit) or they are creating new documents (as if they go
on folder > new > forms)?
The problem is, in both cases a user would need read/write permissions.
The normal flow content (data) is created in KM is as follows:
1. user is assigned to a role
2. role contains KM Navigation iView
3. KM Navigation iView executes com.sap.km.cm.navigation component
4. user chooses New > Form UI command (edit_xml_forms)
5. edit_xml_forms UI command executes its code (com.sapportals.wcm.rendering.uicommand.cm.UIXMLFormsCreateCommand) and open xml edit for the user
6. user fill the form and click Save, form is created into folder
For what I understood so far, your requirement basically asks you to go directly to step 5, it is
possible to pass a URL that goes directly to step 5, the UI command button, but if you do that
you won't have a context, so chances that it will work are slim, since a context is required to
fill the parameters asked by the app (like folder, user, permissions, etc). Even though, in some cases you can
still pass the parameters via post in the URL but you must know which service/parameters the
app asks for it, also a URL is static...
That was the create scenario, I think it's more cons than pros, users would still be
able to bypass the URL iView created for that, I'd suggest evaluating again if it's really
a problem having users access cm to manage data
kind regards,
Rafael

How to create an iview for ABAP Webdynpro Application in Portal?

HI,
I am Webdynpro Java webdynpro developer.
I want to create an IVIEW for an ABAP Webdynpro application in the enterprise portal.

The process is almost exactly the same as creating a Web Dynpro Java iView. You simply chose the ABAP instead of the Java radio button when you reach that step in the Web Dynpro iView creation process. There is a video on the topic here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/eae111e7-0b01-0010-6cb7-e0dd2bfbfa7a
You can also read about the process in the online help:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1d/e4a34273f60b31e10000000a1550b0/frameset.htm

Create an iview for batch document upload to KM

Hi, I´m trying to create an iview for batch document upload to the portal. At the moment, I've only been able to upload documents from a source directory in the server, given an xml file uploaded from the client, which indicates the location of these files.
The inclution of the uploaded file to KM is not an issue, that is already solved. I'm just trying to make it usable by an administrative user that may not have access for creating folders in the portal server, unlike me.
I need help doing one of these two things:
1. creating an upload percentage status bar
or 2. accesing the client's directory to upload and insert the file into the repository one by one.
Can anyone help?
(by the way, I'm trying to to exactly what the portal epa import iview does, but with documents, so i know it's possible, i just don't know how)

See /thread/71174 [original link is broken]

Create an iView for Xcelcius SP3 dashboard

I have created an iView for my Xcelcius SP dashboard and I keep getting an error when I click display. I used the instructions in the wiki page
http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofanXcelsiusdashboardinNetWeaverEnterprisePortal
The error I get is
Portal runtime error
An exception occurred while processing your request. Send the exception ID to your poral administrator. Exception id: 03:24-06/05/10_00089-2188150
Can anyone help with this iView creation?

hi Murali,
i have the following error when i try to access any dash boards (item dashboard, collection dashboard, bucket dash board etc.,)
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 10:40_27/07/10_0071_4073650
Refer to the log file for details about this exception.
i do not find this error(4073650) in the trouble shooting link which you provided. Please let me know if there is any other configuration missing.
Thanks
Sujata

Creating Target iView for buisness object in portal

Hi,
We are using EP6 SP9.
While creating Web Target iView for buisness objects, I have to select the input form in the dropdown list. But I am not getting any input form in the drop down. plz help me how to get forms
in that drop down list.
ur timely help will be highly appreciated.
Thanks and Regards
Subhash

Hi Subhash,
If your EP server is inside of the proxy, web target iview can not fetch target url. So you need to set
proxy values in System Administration.
Hope that helps.
Best Regards,
Nash

Error while creating a iView for a deployed EAR File on EP

Hi Guys,
I have a EAR file deployed on Portal. Now When I am trying to create a URL iView its showing error which probably is due to the Same Machine (Portal installation and EAR). But I have to make a iView for that.Can anyone give me a idea how I can create it?
Thanks in Advance
Somil

Hi
Is URL working properly . try checking first whether EAR file when run through URL is working properly.
if it is working let us know what error message you are getting.
Thank you

How to create a Webservice for Adobe Form(I need Coding)?

Hi,
I need coding for Webservice inorder to define the context structure for Adobe Form.
In AdobeForm:
1) I create a dataconnection and while creating it i need to give WSDL Url.
2) I have created it.
3) But iam not getting the Context structure in the Dataview.
For this wht coding i need to write in WSDL File?
Any Help is Highly aprreciated with Points.
Very urgent requirement?

Hi,
I'm not exactly sure what your problem is.
A description on how to call web services can be found in my blog:
/people/juergen.hauser2/blog/2008/02/25/using-web-services-with-sap-interactive-forms-by-adobe-overview-tips
If you are facing an issue with what is displayed in the data view for the WSDL data connection (i.e you are missing nodes) you could try to use Designer 8.0 instead since it cotains bug fixes in that area.
Regards,
Juergen

Problem creating transactional iview for BW system

Hi gurus
We are facing one problem creating a transactional iview for a BW 3.5 system . We wanto to call transaction SU01 in our BW system using an iview. When we use SAP for html, we have all the menu on the iview , I mean the same result as if we use smen, not SU01.
And if we use SAP GUI , we are always having the same GUI Error
Sapgui 640 [Build 8986] Wed Apr 01 12:25:05 2009
: 'service '' unknown
Time          Wed Apr 01 12:25:03 2009
Component     NI (network interface)
Release          640
Version          37
Module          ninti.c
Line          505
Method          NiPGetServByName2: service '' not found
Return Code     -3
System Call     getservbyname_r
Counter          1
Please, can you help us?
Thanks in advance and best regards.

Thanks Bala for your quick reply. I´ve tried with function module RSBB_URL_PREFIX_GET and all the settings were OK. Still the same result.
Adding more information. We have another WAS 6.40 server with different Module(we have RM and XRPM , not BW) and we are having the same problems. I am wondering if its related with some special config or activation
Maybe I´ve forgot some service activation in SICF? I´m able to reach the SMEN, but not the SU01
or I´m missing some config elsewhere?
Thanks in advance.
Best regards.
Edited by: Jose Ignacio Arlandis on Apr 2, 2009 8:41 AM

How to create a transport for SAPscript form

Hi Gurus,
Good day!
I would like seek an expertise from you guys on how i'll be able to create a transport for the SAPscript form. The form has already been copied from the other boxes by running the program RSTXSCRP.
Appreciate your help. Thanks in advance!
Cheers,
Virgilio

hi,
First u create the driver program of the sapscript...ok..
then go to the SE93 and create the T_code of that driver program..
Hope This helps
Regards
RItesh J

Creating URL iview for Interaction center

Hi All,
We currently have Interaction center ( CRM application) integrated in our Portal ( EP 7.0). Due to some issues, we need to create an URL iview for Interaction center instead of a BSP application.
Pls let me know what parameters should I mention to link interaction center in portal.
For BSP ivew we just mentioned the application name and the backend alias.
how wil this work if we need to make it work through URL iview
regards
Uday

I believe its not suggestable to remove that message also as it will be very very serious security threat for your machine,
try -> tools->Internet options>Security->Local internet ->Custom level->Downloads->
Automatice
Automatic prompting for downloads.->enable and try enabling Active X check boxes also give it a try not sure it will work.
use this at your own risk
jo

Transactional iview for Adobe form in ESS MSS

Hi,
I have a object of printing adobe form in R/3 and ESS both. I have created the object for R/3. But now i have to create this object for ESS also.
Kindly suggest technically which is the best way to print the adobe form on ESS.
I have tried one way which is transactional I-view which is displaying the adobe form. Kindly suggest this is technically ok.
Ankit

What version are you on? There are fairly simple ways to do this in BSP's or even now if your are on ECC6, using ABAP Webdynpros are very easy.

Creating a template for multiple forms

     Is it possible to create a template to use in multiple forms
Thanks
Roger

Hi Roger,
FormsCentral does not currently support user-defined form templates. However, there are a couple of options available that you might find useful.
To define/use a template for an entire form:
1. Create a form that will act as your template.
2. To create a new form based on that template simply click the "Duplicate" button in the My Forms dashboard.
The new form will contain the same set of form items as the template form.
To define/use a template for one or more form items that are common to many of your forms:
1. Create a form containing the template form items.
2. To use the fields in different forms you can:
     i. Open the template form.
     ii. Select the form item(s) and type Ctrl+C.
     iii. Create or open the target form.
     iv. Type Ctrl+V to paste form items into the target form.
Regards,
Brian

Series Selection Creating .DMP File for Customised Form

Hello ,
I have created a Customised form with series selection from SAP .
While registration bydefault "Primary" named series is created for that customised form.
Then i added one more Series named " 10-11" with indicator as '2010-11' and set it as default series.
Then i opened the customised form and entered the data it gets saved without any problem.
After that i again went to the Document Settings and change the series from '10-11' to 'Primary' and
select the indicator as 'Default' and saved the settings.
When i opened the customised form the series shown is the changed one as 'Primary' but while entering the data and saving
it system shows ".dmp file created" and sap shuts down.
Then i have to unregister the UDO for that form and to delete all data entered for that form from table to make it work agian.
This is the Problem which i am facing while using the Series in the customised form and its been a trouble some
for me .
Suggest any path to sort out this problem arising.
Thanks & Regards
Amit

Hello Manish,
Thanks for your quick reply.
I am using SAP 2007 B Patch - 13
But my question is if this problem occurs even after Patch upgradation then what will be the step for resolving that.
In future if this problem arises what steps i have to take to remove this problem without affecting my data.
Suggest.
Thanks & Regards,
Amit

Create admin iview for a form

Similar Messages

Maybe you are looking for