Create Alias for BSP
Hello
I.m trying to create Alias for BSP
When i try to create an external Alias and to save i get the folowing message:
Service /sap/bc/solman/defaultUser Cannot be accesed!
Message no. SHTTP009
Diagnosis
You have not entered a handler, and the other services in URL also do not have a handler. This means the service cannot be accessed by HTTP request
Procedure
Check whether this is intentional, and if necesary, enter a handler
Hello,
I've read the thread and i've done the steps from there. I've enterede in se80 and published WEBGUI and SYSTEM. but when i try to create the alias i still get the same error. "no handler defined". The connection to the sistem with webgui works. I think that i need to publish another service. I need to use the service under: sap/bc/solman/defaultuser.
Regards
Similar Messages
-
Creating Alias for command which contains two piped cmdlet
hi friends
i use powershell 4.0. is it possible to create Alias for cmdlet which is piped to another cmdlet?
i need to use this command frequently:
Get-windowsFeature | select-object name ( to see only "name" column)
i checked & non of the following commands works:
new-alias myalias Get-windowsFeature | select-object name
or
new-alias myalias "Get-windowsFeature | select-object name"
any solution please?
thanks in advancedYou can't do that with an alias, it only works to substitute the name of a cmdlet or function, and takes a string value as it's argument. You can accomplish the same effect with a function, which takes a script block argument:
function myalias {Get-windowsFeature | select-object name}
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "
hi mjolinor
Great guide. really thanks for that. it was exactly what i needed.
best regards -
Creating Alias for any application which has been integrated into portal
Hi All,
How to create Alias for any application which has been integrated into Portal?
What is portal alias?
What is URL alias?
What is the difference between all the three?
Thanks,
Jyothi.
Edited by: Venkata Naga Jyothi on Nov 23, 2011 10:18 AMHi jyothi,
1. For your first question Regarding How to create Alias for any application which has been integrated into Portal? Can you please be more clear here my question is why do you need to create alias for applications that are integrated into the portal.
2. For your second and third questions find the below links
http://help.sap.com/saphelp_nw70/helpdata/en/6e/8590f1d6d349c9adc34c6a8085189b/content.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10da65ed-615b-2d10-efbc-ed07a5385633?QuickLink=index&overridelayout=true
Thanks,
Rahul.
Edited by: rahul.girmaji on Nov 23, 2011 6:29 PM -
Creating alias for BEx dimensions in crystalreport
I need help with creating alias formula for BEx dimensions in crystal report. Iam trying to follow the book, but i don't know what should be the result.
Hi,
Crystal Reports is using the technical names of the InfoObjects itself so those names should be familiar assuming you also know the BEx Query.
If you want to create some form of an alias the option I can see is to create a set of formulas which simply include the field and then use those formulas as part of any other formulas.
regards
Ingo Hilgefort -
Error while creating external alias for BSPs & DMS
Hello All,
Has anybody encountered the below error dump while creating the external aliases for Business Server Pages and Document Management Service?
The error dump I have received is "ITAB_DUPLICATE_KEY"
"A Row with same key already exists"
The error has ocurred in the program "RSICFTREE".
I am getting this above described error while navigating to the "Target Element" tab.
Can anybody help pls?
best regds,
Alagammai.Hi Tony,
Somehow I solved this issue. I dont remember what exactly I did, as it was sometime back in December. I think I used the Wizard initially to do the configurations in Solution Manager and again i tried to do the same manually as the earlier one threw some errors.
It seems the wizard proceeded half-way through and hence the entry was made in the database already and hence that error.
Anyways thank you for replying me.
best regds,
Alagammai. -
Creating alias for Web access to SQL Server Reporting Services
Hello colleagues.
I have MS SQL Server 2012 with SQL Server Reporting Services in domain "domain.local". In the local network at the entrance via Web browser to "mdr.domain.local/Reports" get into Reports of SQL Server Reporting Services and it's work fine.
Necessary that the SQL Server Reporting Services could include via Web browser from alias "reports2.domain.local/Reports". To do this:
1) I created a new A record "reports2" in the DNS leading to IP mdr.domain.local
2) in Reporting Services Configuration Manager on a tab "Web Service URL" in "Report Server Web Service URLs" I add new record "http://reports2:80/ReportServer" (host Header Name: reports2)
BUT "reports2.domain.local/Reports" is not work. When entering to "reports2.domain.local/Reports" I see page "An error in the security certificate for this Web Site..." and when I click "Continue to ...", then "Unable
to find a web page."
What and where I must add/change for work of alias "reports2.domain.local/Reports" by analogy with "mdr.domain.local/Reports"?
I hope for your help.
Thanks.WooW it's work!!! Thank you
JJordheim you are the best!
With my PKI I create new certificate for "reports2.domain.local" and Import it to MDR server (in Personal). I create new network adapter and configure Reporting Services Configuration on "Report manager URL" tab (for SSL):
mdr.domain.local - certificate "mdr.domain.local" - network adapter №1
reports2.domain.local - certificate "reports2.sygroup.local" - network adapter №2
And all work fine.
If I configure all to 1 network adapter it's doesn't work.
Thanks for help! -
Maintaining External Alias for BSP Pages in EBP lauchpad
Hello,
Below is the problem mentioned :
Our SRM production system is installed on a AIX server that has
svuni299.its.it as fully qualified domain name.
When we connect to the system using the url
http://svuni299.its.it:8052/sap/bc/gui/sap/its/bbpstart
everything works fine.
Instead, when we use the alias:
http://sapienssrm.fiat.com:8052/sap/bc/gui/sap/its/bbpstart
we have some problems with the logon to the CCM, because the system
asks the password again.
In the attachment problem.doc you can see how to reproduce the error.
We have seen that in both case, in the left menu of the SRM, all the
entry contains always a call to an absolute url like this:
javascript:parent.launchSrvc
('','BSP_APPLICATION','http://svuni299.its.it:8052/sap/bc/bsp/ccm/cat_cd
c/container.htm?sap-client=100&sap-sessioncmd=open&sap-
language=I','menu')
instead of having a relative url like this:
javascript:parent.launchSrvc
('BBPSC18','IAC','/sap/bc/gui/sap/its/bbpsc18/!?
client=100&language=IT&~logingroup=SPACE','menu')
My Questions:
Q1.Where can one maintain an external alias to access BSP pages from EBP launch pad.
Q2.Should relative URL be called or absolute URL?
Cheers,
Rohan.Hi Rohan,
You can maintain external aliases using Tcode- sicf.
There on application toolbar you will find a push button <b>External Alias</b> click on that and then select your virtual host and press create new button and enter the required informations.
Cheers!
Narinder -
Creating alias for a table. Urgent!! Need help
we are migrating databases from SQL Server to Oracle 9i. In sql server database we have couple of table names with more than 30 characters in length. In oracle is it supports or not I am not sure. Does anyone know how to create an alias in Oracle?
Suggestions welcome. Thanks in advance.
RameshThis is not possible currently. Object (tables/views/procedures) names cannot be larger than 30 characters.
Donal -
Can't create an alias for User home folder for a second user
Please help:
I can't make an alias of a User home folder of a second user. I can successfully make an alias of a home folder of the first user. The computer says the folder is in use and to wait for some activity to complete, or that I don't have enough privileges. There are no activities happening and both accounts are administrator level. Is this a behavior of OS 10.5.6? I created alias for the two users before, but had unrelated problems and wiped the drive, re-installed 10.5.6 and now I can't do it.
Much thanks and aloha - Rockyhi Petar,
Wish it was that simple where i can just change the ID to ACT but unfortunately alot of our users like to hardcode there currentview and changing the scenario dimensions would take a big effort and alot of support work. We had changed one of the dimension members before and we got phone calls asking why the report doesn't work for weeks. Do you know if the NW version of BPC has that capability?
Thanks,
Elmer -
Hello expert, I am thinking to create Alias for Fully Qualified Domain Name(FQDN) for the BSP page for SRM EBP(bbpstart). I know there is external alias function from SICF. But that is for the subfix. I want to have alias replacing the fully qualied domain name part. I know we could do it on IIS level. But not sure if SRM system has that.
For example: http://hostname.domain.port/srm
where srm was already replaced sap/bc/gui/sap/its/bbpstart by external alias from sicf
But I also want the FQDN, hostname.domain.port, replace by a name, let's say enterpriseshopping.
so the desired URL will be http://enterpriseshopping/srm
And advice would be very appreciate..
Thanks,
KevHello Sanjeev, thank you so much for the help.
It is a bit complicated for me to understand those scenarioes. Our SRM system is only for internal users, intranet. Can you help me to fill these fields out.
For my example of current url https://Dxxname.XXX.com:8080/srm
and the expected url https://www.enterpriseshopping.com/srm
shall I enter these for table httpurlloc:
Mandt = 100
Sort_key = ?? ( any help for this, there isn't much info from help )
Protocol = https
Application = *
For_domain = " " (blank)
Host = www.enterpriseshopping.com
Port = 10443 ( the default port for internat )
Am I really wrong, or ....
Thanks again,
Kev -
Alias for Sender SOAP Adapter URL
When I create a web service for an o/b interface using the wizard, I need to give the URL of the pattern
http://<host:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>
Looking at the URL, I think there is servlet that is processing the incoming SOAP messages based on the parameter (channel) and adding the SOAP Header for Sender Service, Sender Interface from that channel before sending it to IE.
Is there anyway to create aliases for these URLs so that I can have distinct URL for each interface eg. http://<host:<port>/DeliveryConfirmation, http://<host:<port>/InvoiceCheck etc?
I need to publish web services in custom-built UDDI tool which expects the URLs to be unique. (This uniqueness should not based on the parameter 'channel'). UDDI tool expects the part of the URL before '?' to be unique, which is not in my case. So, I'm thinking of aliases.
Did anyone create Alias for sender SOAP adapter URL?
I appreciate your inputs on this.
thx
praveenStefan,
Creating an alias like (http://<host:<port>/DeliveryConfirmation) for each web service makes the end Point URL (http://<host:<port>/DeliveryConfirmation?channel=<party>:<service>:<channel>) unique and my custom-built UDDI server would allow it.
In this case, all the aliases would be for the same context path '/XISOAPAdapter/MessageServlet', right?
I see the following on the help page.
Prerequisites
You must first have the J2EE Web applications deployed so that their aliases are added to the list of available application aliases. Then you can decide which one to remove from it.
Do I need to deploy any J2EE Web Application here?
I'm thinking that since 'XISOAPAdapter/MessageServlet' is already deployed, I just have to create a various aliases for it.
I highly appreciate your inputs.
thx
praveen -
Hi All,
I am new to this portal
Can anybody suggest me a way to create alias for my portal.
i want to access my portal using <b>http://<servername>:<port>/sapportal</b> without using <b>http://<servername>:<port>/irj/portal</b>
regards,
prasanthi o.irj/portal will come as default with portal
if u want remove this irj/portal u can remove but u can't replace with sapportal
if u want to access certain iview or pages directly u can use quick links option
Quick links are shortcuts to iViews and pages. Each quick link is a string that you add to the default portal URL in order to navigate to a specific iView or page.
Quick links provide a meaningful name for iViews and pages to which users may want to navigate.
Procedure
1. Enable Short URLs
a. Go to System Administration-->Navigation --> Short URLs
b. Choose True (default) in the Use Short URLs drop list menu
c. Choose Save Configuration
2. Define Quick Links
a. Go to Content Administration --> Portal Content ->Folder --> iViews (i.e. Content Administration à Portal Content à My Folder à iViews à SAP News)
b. Double-click SAP News to edit the iView
c. Choose Navigation from the Property Category drop list menu.
d. Enter a name for the Quick Link. (i.e. News)
e. Choose Save.
f. Choose Close.
g. Add the object to a role if necessary.
h. Repeat steps a to go to create more Quick Links.
3. View a Quick Link or Short Navigation URL in the Portal.
a. Enter the link to your portal and append the Short Navigation URL or Quick Link. to the URL
(For example, http://myServer:50000/irj/portal/News) -
How to create an External Alias for a Portal URL ?
Hi Gurus,
Can anybody tell me how to create an external alias for a portal link(URL). Actually, my problem is i want to send this Portal URL(link) thru' a SendMail step to the user so that when he clicks on it, it will take him to his UWL(Ofcourse after signing-in). As this URL length is > 80 char(101 char), i am not getting the full lenght URL in my Outlook mail. THough we are on ECC 6.0,Basis Rel 7.0, as per the OSS note 559234, we should have this length extended to 132 bytes. But, for some reason, its not happening. And,in the same OSS note, it was mentioned that we can use external aliases to achieve this(shortening the URL length).
Can anybody tell me how to achieve this, either thru' increasing the URL length or thru' ext. aliases.
Please reply asap.
Thanks in advance
venuNot an issue as of now. I'll open up again if needed
-
Is it possible to create an alias for a network share?
I would like to have an alias on my desktop for several network shares. If I create one and then eject the share, the shortcut still works for a while, but then it fails to find the target.
I would like to avoid having to use the Go to server function every time I want to connect to a share.
Regards,
-TravisHi Rene,
It is not possible to create alias of sap pi webservice. refer the micheal's reply in below blog
Alias for Sender SOAP Adapter URL
regards,
Harish -
Problem in creation of system alias for bw system
Hi,
I want to create system alias for the bw system
system admin->sys Config->system landscape->portal content->my own folder
for this folder i created the system object
after creation of system object, from property category i select the connector and give the details.
after that i select the user management and give
authentication ticket - select
Logon method- UIDPW
User Management type- admin,user
i saved till now
in the display object i select the system alias
then that screen displays
In the system alias screen, i clicked on add button for adding alias then we r getting this message.
User Mapping Status: (Not ready for user mapping configuration)
Please give the solution for solving this problem
Regards,
Sid.
Edited by: sid m on Mar 11, 2008 12:15 PMHi Krishna,
I checked the connection settings.
WAS settings in system object is giving this mistake
before user mapping it works fine.
after giving usermapping i ma getting this exception.
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (172.19.18.75)
5. HTTP/S connection failed
for testing the connector i am getting this exception
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Regards,
Sid.
Maybe you are looking for
-
Dreamweaver 8 - Include File issue
Can anyone help. I have managed to fix this on previous versions of Dreamweaver however its not working on Dreamweaver 8. The problem is I'm trying to view Include files (.inc) in Design view, but Dreamweaver 8 will only allow me to view this in code
-
Quicktime Broadcaster 1.5 and Darwin Streaming Server 5.5
Since i upgraded to Quicktime Broadcaster 1.5 (as i want to use H264) i can't use any more the Automatic Unicast (Announce). It says 'Broadcast error disconnected (-3285). I updated to Darwin Streaming Server 5.5 (on SuSE 9.1 Linux on a hired server
-
IPTComm 2010 Call for Papers: Deadline Extended
CALL FOR PAPERS: DEADLINE EXTENDED 4th ACM Conference on Principles, Systems and Applications of IP Telecommunications IPTComm 2010 http://www.iptcomm.org August 2-3, 2010 Leibniz Supercomputing Center Munich, Germany IMPORTANT DATES ================
-
Select *, rowid into var1, var2 from...
Hello, as mentioned in the subject, I want to do the following in plsql: var1 table%rowtype; var2 rowid; select *, rowid into var1, var2 from table where ...; So this is not possible yet, what else can I do instead as I ... 1. don't want to split one
-
Mutiple file sender to mutilple file response
Hi I have a scenario where i am receiving the multiple files from source at same time...XI has to pick up all files at single ( I think we can do that using the File masking ) but the problem is i want the response back to each sender file...how we