Create ALV with to containers with the option to drag fields

HI All ,
I need to create ALV report that the report have containers that you can drag
some fields from one containers to the second one (if its not possible maybe to mark some fields and push on button and the marked fields will be shown on the second container ) there is sample that i can use
and can help me to do that ?
Regards
Alex

Hi Alex,
You can do that with OOP ALV.
You need to create two custom containers on the screen for displaying two layouts. Then with the help of ondrag, ondrop and ondropcomplete events you can drag a record from one layout to drop into another table.
Please refer report 'BCALV_TEST_GRID_DRAG_DROP' which has detailed description and explanation for each of the required events' definition and implementation.
Hope this helps.
Thanks.
Abhijeet
Edited by: Abkaps on Jun 28, 2010 12:50 PM

Similar Messages

Infoobject Characterisitc created with the option of BW Application

Hello,
We have created Characteristics with the option of SAP BW as the application [and not as SAP APO].
We have used some of the characteristics as navigational attributes. subsequently, we have loaded and activated the master data for the main characteristics.
We have been able to successfully load the InfoCube [with the navigational attributes activated in the cube].
We have used the same characteristics in the MPOS and generated the CVCs from the InfoCube.
But when we try to load the data in the Planning area [linked to the above mentioned MPOS], we get an error message "Characteristics mapping: No data copied
Message no. /SAPAPO/MSDP_REL120"
Could you please let us know what possibly the reason could be for this?
We suspect the reason to be the way the Characteristics have been defined.
Regards,
Sandeep Deolekar

Sandeep
I have seen this problem if you have 0CALDAYS defined in your time buckets profile, there is a program correction see SAP Note 774555 for the correction instructions:
Symptom
You are using transaction /SAPAPO/TSCUBE to load data from an InfoCube to a planning area. If the planning data is located in the InfoCube for exact days (InfoObject 0CALDAY exists in the InfoCube), no planning data is transferred.
In the log, the warning "Characteristic assignment: No data was copied."
Other terms
/SAPAPO/TSCUBE /SAPAPO/MSDP_REL120
Reason and Prerequisites
This is caused by a program error.
Solution
SCM Release 4.1: The source code corrections can be implemented automatically using SNOTE before Support Package 4 is implemented.
This is applicable for SCM4.1
Hope this helps
Regards
Ian

When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified

When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified because it is already in use ??? What am I doing wrong?

settings -> iTunes & App Store
click on apple ID listed there
select Sign Out
sign in with the proper account
from then on, when the store ask for your password it should be with the correct ID

Editable ALV with SAVE option

Hi experts,
Could you plz provede me an example for an EDITABLE ALV with the SAVE option. i.e. i could edit the ALV output and after the changes i should save the changes i made by clicking SAVE button.
Thanks in advance
Regards,
Ram

hi,
check the sample code
REPORT ZLAXMI_REPORT6 NO STANDARD PAGE HEADING
MESSAGE-ID ZZ
LINE-SIZE 132
LINE-COUNT 65 .
TABLES: MARA.
TYPE-POOLS: SLIS.
TYPES: BEGIN OF T_MARA,
MATNR TYPE MARA-MATNR, "Material Number
ERSDA TYPE MARA-ERSDA, "Creation date
BRGEW TYPE MARA-BRGEW, "Gross weight
NTGEW TYPE MARA-NTGEW, "Net weight
MTART TYPE MARA-MTART, "Material type
MBRSH TYPE MARA-MBRSH, "Industry Sector
REC_SEL TYPE C , "checkbox
END OF T_MARA.
V A R I A B L E S
DATA: V_REPID LIKE SY-REPID,
V_FLAG(1) TYPE C.
CONSTANTS :
C_X(1) TYPE C VALUE 'X',
C_PF_STATUS TYPE SLIS_FORMNAME VALUE 'F_SET_PF_STATUS',
C_FC_DELETE(6) TYPE C VALUE 'DELETE',
C_FC_MODIFY(6) TYPE C VALUE 'MODIFY',
C_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'F_USER_COMMAND',
C_USER_COMMAND_MODIFY TYPE SLIS_FORMNAME
VALUE 'F_USER_COMMAND_MODIFY',
C_ICON_DELETE TYPE ICON-NAME VALUE 'ICON_DELETE', " Icon,Delete'
C_ICON_CANCEL TYPE ICON-NAME VALUE 'ICON_CANCEL', " Icon,Cancel'
C_FC_SAVE(4) TYPE C VALUE 'SAVE'.
*internal table declarations.
DATA: IT_MARA TYPE STANDARD TABLE OF T_MARA WITH HEADER LINE,
IT_MODIFY TYPE STANDARD TABLE OF T_MARA WITH HEADER LINE,
IT_TEMP TYPE STANDARD TABLE OF MARA WITH HEADER LINE,
*-ALV Internal Tables.
*--Field Catalog
IT_FIELDCAT TYPE STANDARD TABLE OF
SLIS_FIELDCAT_ALV WITH HEADER LINE,
*--Layout
WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
*--Sort
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV ,
**-Structure for excluding function codes
WA_EXTAB TYPE SLIS_EXTAB,
**-To hold function codes to be excluded in ALV toolbar
IT_EXTAB TYPE SLIS_T_EXTAB.
*selection screen.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR,
S_ERSDA FOR MARA-ERSDA.
SELECTION-SCREEN: END OF BLOCK B1.
*--Radio buttons to select either Display/Delete/Modify
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME
TITLE TEXT-002.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) TEXT-003.
PARAMETERS: P_DISP RADIOBUTTON GROUP RAD1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) TEXT-005.
PARAMETERS: P_UPD RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) TEXT-004.
PARAMETERS: P_DEL RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B2 .
AT SELECTION-SCREEN.
PERFORM VALIDATE_SCREEN.
*start of selection
START-OF-SELECTION.
*clear the internal tables to be used.
CLEAR: IT_MARA,IT_MARA[],
V_FLAG.
*get the data
PERFORM GET_DATA.
*end of selection
END-OF-SELECTION.
IF IT_MARA[] IS INITIAL.
MESSAGE I000 WITH
'No Records found for the given Selection Criteria'(012).
ELSE.
*do alv process
V_REPID = SY-REPID.
*--Sort the Output Fields
PERFORM SORT_FIELDS.
*--Build Field catalog for the Output fields
PERFORM BUILD_FIELDCAT.
*--Set the Layout for ALV
PERFORM SET_LAYOUT.
IF P_DISP = C_X.
*--Exclude any Buttons on the Appn tool bar
perform change_default_pf_status.
MOVE C_FC_DELETE TO WA_EXTAB-FCODE. " DELETE button on ALV
APPEND WA_EXTAB TO IT_EXTAB.
MOVE C_FC_MODIFY TO WA_EXTAB-FCODE. " MODIFY button on ALV
APPEND WA_EXTAB TO IT_EXTAB.
ELSEIF P_UPD = C_X.
*--Exclude DELETE Button on the appn tool bar
MOVE C_FC_DELETE TO WA_EXTAB-FCODE. " DELETE button on ALV
APPEND WA_EXTAB TO IT_EXTAB.
ELSEIF P_DEL = C_X.
*--Exclude MODIFY button on appn tool bar
MOVE C_FC_MODIFY TO WA_EXTAB-FCODE. " MODIFY button on ALV
APPEND WA_EXTAB TO IT_EXTAB.
ENDIF.
*--Exclude SAVE button for all options
MOVE 'SAVE' TO WA_EXTAB-FCODE. " SAVE button on ALV
APPEND WA_EXTAB TO IT_EXTAB.
*--Display ALV output
PERFORM LIST_DISPLAY TABLES IT_MARA
USING C_USER_COMMAND.
ENDIF.
*& Form get_data
text
--> p1 text
<-- p2 text
FORM GET_DATA .
SELECT MATNR
ERSDA
BRGEW
NTGEW
MTART
MBRSH
FROM MARA
INTO TABLE IT_MARA
WHERE MATNR IN S_MATNR
AND ERSDA IN S_ERSDA.
IF SY-SUBRC <> 0.
*no records selected leave processing
STOP.
ENDIF.
SORT IT_MARA.
ENDFORM. " get_data
*& Form sort_fields
text
--> p1 text
<-- p2 text
FORM SORT_FIELDS .
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'MATNR'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'ERSDA'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
ENDFORM. " sort_fields
*& Form build_fieldcat
text
--> p1 text
<-- p2 text
FORM BUILD_FIELDCAT .
IT_FIELDCAT-COL_POS = '1'.
IT_FIELDCAT-FIELDNAME = 'MATNR'.
IT_FIELDCAT-KEY = 'X'.
IT_FIELDCAT-OUTPUTLEN = '15'.
IT_FIELDCAT-SELTEXT_L = 'Material number'(022).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '2'.
IT_FIELDCAT-FIELDNAME = 'ERSDA'.
IT_FIELDCAT-KEY = 'X'.
IT_FIELDCAT-OUTPUTLEN = '10'.
IT_FIELDCAT-SELTEXT_L = 'Created on'(023).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '3'.
IT_FIELDCAT-FIELDNAME = 'BRGEW'.
IT_FIELDCAT-OUTPUTLEN = '10'.
IT_FIELDCAT-SELTEXT_L = 'GROSS WEIGHT'(024).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '4'.
IT_FIELDCAT-FIELDNAME = 'NTGEW'.
IT_FIELDCAT-OUTPUTLEN = '15'.
IT_FIELDCAT-SELTEXT_L = 'NET WEIGHT'(025).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '5'.
IT_FIELDCAT-FIELDNAME = 'MTART'.
IT_FIELDCAT-OUTPUTLEN = '3'.
IT_FIELDCAT-SELTEXT_L = 'Material type'(026).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '6'.
IT_FIELDCAT-FIELDNAME = 'MBRSH'.
IT_FIELDCAT-OUTPUTLEN = '25'.
IT_FIELDCAT-SELTEXT_L = 'Industry sector'(027).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-FIELDNAME = 'REC_SEL'.
IT_FIELDCAT-NO_OUT = C_X.
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
ENDFORM. " build_fieldcat
*& Form list_display
text
-->P_IT_MARA text
-->P_C_USER_COMMAND text
FORM LIST_DISPLAY TABLES P_IT_MARA
USING P_USER_COMMAND TYPE SLIS_FORMNAME.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = C_PF_STATUS
I_CALLBACK_USER_COMMAND = P_USER_COMMAND
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT[]
IT_EXCLUDING = IT_EXTAB[]
IT_SORT = IT_SORT[]
TABLES
T_OUTTAB = P_IT_MARA
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " list_display
*& Form F_SET_PF_STATUS
Set PF_STATUS STANDARD modifying the standard toolbar
by excluding some buttons
-->P_IT_EXTAB -- TABLE OF EXCLUDING FUNCTIONS
FORM F_SET_PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
CLEAR : WA_EXTAB,
IT_EXTAB.
*--Set the Modified PF status for the ALV.
SET PF-STATUS 'ALV_STATUS_01' EXCLUDING RT_EXTAB.
ENDFORM. " SET_PF_STATUS
*& Form f_user_command
Handle user action on ALV toolbar
FORM F_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
RS_SELFIELD-REFRESH = C_X.
IF R_UCOMM = C_FC_DELETE.
*--User Selected DELETE button.
PERFORM DELETE_SELECTED_RECORDS.
ELSEIF R_UCOMM = C_FC_MODIFY.
*--If user selects MODIFY button.
PERFORM CHANGE_RECORDS.
ENDIF.
ENDFORM. "F_USER_COMMAND
*& Form POP_UP_CONFIRMATION
text
<--P_ANSWER text
FORM POP_UP_CONFIRMATION
CHANGING P_ANSWER TYPE C.
DATA:
L_TITLE(14) TYPE C, " Title of pop-up
L_TXT_QUESTION(52) TYPE C, " Text displayed in pop-up
L_DISP_CANCEL TYPE C, " Display 'Cancel' button?
L_BTN1 TYPE ICON-NAME, " Icon on button 1
L_BTN2 TYPE ICON-NAME. " Icon on button 2
L_TITLE = 'Delete'(017). " delete
L_TXT_QUESTION = 'Are you sure to delete?'(018).
L_BTN1 = C_ICON_DELETE.
L_BTN2 = C_ICON_CANCEL.
**-Display pop-up asking user for confirmation
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = L_TITLE
TEXT_QUESTION = L_TXT_QUESTION
TEXT_BUTTON_1 = 'Yes'
ICON_BUTTON_1 = L_BTN1
TEXT_BUTTON_2 = 'No'
ICON_BUTTON_2 = L_BTN2
DEFAULT_BUTTON = '2'
DISPLAY_CANCEL_BUTTON = 'X'
IMPORTING
ANSWER = P_ANSWER
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'Error executing function module:'(019)
'POPUP_TO_CONFIRM'.
ENDIF.
ENDFORM. "pop_up_confirmation
*& Form set_layout
text
--> p1 text
<-- p2 text
FORM SET_LAYOUT .
IF P_DEL = C_X OR P_UPD = C_X.
*--Allow Input only if user choose 'UPDATE'/ 'DELETE' radio buttons
WA_LAYOUT-BOX_FIELDNAME = 'REC_SEL'.
WA_LAYOUT-BOX_TABNAME = 'IT_MARA'.
ENDIF.
*--Display Header based on the user selection
IF P_DISP = C_X.
WA_LAYOUT-WINDOW_TITLEBAR =
'Display '(036).
ELSEIF P_DEL = C_X.
WA_LAYOUT-WINDOW_TITLEBAR =
'Delete '(037).
ELSEIF P_UPD = C_X.
WA_LAYOUT-WINDOW_TITLEBAR =
'Change '(038).
ENDIF.
ENDFORM. " set_layout
*& Form change_default_pf_status
text
--> p1 text
<-- p2 text
FORM CHANGE_DEFAULT_PF_STATUS .
MOVE C_FC_DELETE TO WA_EXTAB-FCODE. " DELETE button on ALV
APPEND WA_EXTAB TO IT_EXTAB.
MOVE C_FC_MODIFY TO WA_EXTAB-FCODE. " MODIFY button on ALV
APPEND WA_EXTAB TO IT_EXTAB.
ENDFORM. " change_default_pf_status
*& Form f_user_command
Handle user action on ALV toolbar
FORM F_USER_COMMAND_MODIFY USING R_UCOMM LIKE SY-UCOMM "#EC *
RS_SELFIELD TYPE SLIS_SELFIELD.
DATA : L_ANSWER TYPE C. "#EC *
IF R_UCOMM = C_FC_SAVE.
*user selected save button
READ TABLE IT_MODIFY WITH KEY REC_SEL = 'X'.
*check if user selected atleast one line.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'No record(s) Selected to Modify'(016).
EXIT.
ENDIF.
LOOP AT IT_MODIFY WHERE REC_SEL = 'X'.
*--Check the entered values are valid or not.
IF NOT ( it_modify-status = 'A' OR
it_modify-status = 'C' OR
it_modify-status = 'E' ).
*--User Entered invalid value for STATUS field,so Display Error Msg
CLEAR R_UCOMM.
MESSAGE e000 WITH 'Invalid value '''(031)
'' for Status in the Record # '(032)
sy-tabix.
ENDIF.
ENDLOOP.
CLEAR: IT_TEMP,
IT_TEMP[].
LOOP AT IT_MODIFY WHERE REC_SEL = 'X'.
MOVE-CORRESPONDING IT_MODIFY TO IT_TEMP.
APPEND IT_TEMP.
CLEAR IT_TEMP.
ENDLOOP.
*--start new code
DATA : IT_TEMP2 LIKE STANDARD TABLE OF MARA WITH HEADER LINE.
SELECT * FROM MARA
INTO TABLE IT_TEMP2
FOR ALL ENTRIES IN IT_TEMP
WHERE MATNR = IT_TEMP-MATNR.
IF SY-SUBRC = 0.
LOOP AT IT_MODIFY WHERE REC_SEL = 'X'.
READ TABLE IT_TEMP2 WITH KEY MATNR = IT_MODIFY-MATNR.
IF SY-SUBRC = 0.
IT_TEMP2-NTGEW = IT_MODIFY-NTGEW.
IT_TEMP2-BRGEW = IT_MODIFY-BRGEW.
MODIFY IT_TEMP2 INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ENDIF.
*modify mara table with the changed values
MODIFY MARA FROM TABLE IT_TEMP2 .
*--end new code
IF SY-SUBRC = 0.
COMMIT WORK AND WAIT.
*--Display message with Success in Updating database
MESSAGE I000 WITH SY-DBCNT
' Record(s) has been Updated'(020).
CLEAR :
IT_MARA,
IT_MARA[].
*get-data again from database.
PERFORM GET_DATA.
RS_SELFIELD-REFRESH = C_X.
ELSE.
*--Error occurred
MESSAGE I000 WITH 'Error occured in Modifying the database'(021).
ENDIF.
ENDIF.
ENDFORM. "f_user_command_modify
*& Form validate_screen
text
--> p1 text
<-- p2 text
FORM VALIDATE_SCREEN .
DATA : LV_MATNR LIKE MARA-MATNR.
*--validate product
IF NOT S_MATNR[] IS INITIAL.
SELECT MATNR
INTO MARA-MATNR
FROM MARA
WHERE MATNR IN S_MATNR.
ENDSELECT.
IF SY-SUBRC <> 0.
*--Error
MESSAGE E000 WITH 'Invalid Material'(034).
ENDIF.
ENDIF.
ENDFORM. " validate_screen
*& Form delete_records
text
--> p1 text
<-- p2 text
FORM DELETE_RECORDS .
LOOP AT IT_MARA.
MOVE-CORRESPONDING IT_MARA TO IT_TEMP.
APPEND IT_TEMP.
CLEAR IT_TEMP.
ENDLOOP.
DELETE MARA FROM TABLE IT_TEMP.
IF SY-SUBRC = 0.
*--Successfully selected records Deleted.
COMMIT WORK AND WAIT.
*--Display Success Message to the user
MESSAGE I000 WITH SY-DBCNT
' Record(s) deleted Successfully'(010).
ELSE.
*--Error occured in deletion
MESSAGE I000 WITH 'Error occured in Deleting the Record(s)'(011).
ENDIF.
CLEAR: IT_MARA,
IT_MARA[],
IT_TEMP,
IT_TEMP[].
V_FLAG = C_X.
STOP.
ENDFORM. " delete_records
*& Form delete_selected_records
text
--> p1 text
<-- p2 text
FORM DELETE_SELECTED_RECORDS .
DATA : L_ANSWER(1) TYPE C.
READ TABLE IT_MARA WITH KEY REC_SEL = C_X.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'No record(s) Selected to Delete'(013).
EXIT.
ELSE.
*--Ask for delete confirmation
PERFORM POP_UP_CONFIRMATION
CHANGING L_ANSWER.
IF L_ANSWER = '1'. " 'Yes'
CLEAR: IT_TEMP,
IT_TEMP[].
LOOP AT IT_MARA WHERE REC_SEL = 'X'.
MOVE-CORRESPONDING IT_MARA TO IT_TEMP.
APPEND IT_TEMP.
CLEAR IT_TEMP.
ENDLOOP.
DELETE MARA FROM TABLE IT_TEMP.
IF SY-SUBRC = 0.
*--Successfully selected records Deleted.
COMMIT WORK AND WAIT.
*--Display completed work information to the user
MESSAGE I000 WITH SY-DBCNT
' Record(s) deleted Successfully'(014).
*--Clear the Internal tables
CLEAR: IT_MARA,
IT_MARA[].
*--Reselects entries from Database again & display in ALV
PERFORM GET_DATA.
ELSE.
*--Error occured
MESSAGE I000 WITH
'Error occured in Deleting the Record(s)'(015).
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " delete_selected_records
*& Form change_records
text
--> p1 text
<-- p2 text
FORM CHANGE_RECORDS .
READ TABLE IT_MARA WITH KEY REC_SEL = 'X'.
*--check user selected at least 1 record to MODIFY or not
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'No record(s) Selected to Modify'(016).
EXIT.
ELSE.
CLEAR : IT_MODIFY,
IT_MODIFY[].
LOOP AT IT_MARA WHERE REC_SEL = 'X'.
IT_MODIFY = IT_MARA.
APPEND IT_MODIFY.
CLEAR IT_MODIFY.
ENDLOOP.
*--Change PF status for this new ALV list.
PERFORM CHANGE_PF_STATUS_AGAIN.
*--Change Field Catalog to make INPUT enabled.
READ TABLE IT_FIELDCAT WITH KEY FIELDNAME = 'NTGEW'.
IT_FIELDCAT-INPUT = C_X.
MODIFY IT_FIELDCAT INDEX SY-TABIX.
*--Call ALV LIST DISPLAY with this new values.
PERFORM LIST_DISPLAY TABLES IT_MODIFY
USING C_USER_COMMAND_MODIFY.
ENDIF.
ENDFORM. " change_records
*& Form change_pf_status_again
text
--> p1 text
<-- p2 text
FORM CHANGE_PF_STATUS_AGAIN .
MOVE C_FC_DELETE TO WA_EXTAB-FCODE. " DELETE button on ALV
APPEND WA_EXTAB TO IT_EXTAB.
MOVE C_FC_MODIFY TO WA_EXTAB-FCODE. " MODIFY button on ALV
APPEND WA_EXTAB TO IT_EXTAB.
ENDFORM. " change_pf_status_again

My macbook started crashing on startup. The startup tone wavers. I got it going with the option start keystroke. Is this apt to be software or hardware? I ordered new system software to see if a new install will solve.

My macbook started crashing on startup. The startup tone wavers. I got it going with the option start keystroke. Is this apt to be software or hardware? I ordered new system software to see if a new install will solve.

when you install the disc, do it with the machine powered off. Place the disc in the the slot, push it in while holding the power switch tp poer it up, while holding the "C" key down till the gear starts spinning. After the gear starts spinning you can release the C key and wait. This takes much longer than normal longer, then create a new account. Be ready to wait.
USE YOUR ORIGINAL INSTALL DISC!

HT204053 I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.

I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.
How do I enable my new device with an existing ID - I do not need to change the password for the millionth time!
None of the FAQs (or the Community choices below) address new devices, they are all about APPS and iCloud stuff.

If it is an existing iCloud ID, you should be able to just go to Settings>iCloud and sign in with it.

Everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? With the options cancel, continue restore and delete back-up??

I upgraded to iOS 5 on my 3GS without any issues but now everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? with the options of cancel, continue restore and delete back-up. what happens if i click delete back up?

I'm not getting the message anymore!
What I did:
1.- Went to preferences in itunes/ Devices --> erased the corrupted backup (there were two backups)
2.- Upgraded to iOS 5.0.1
Done!
PS: Maybe upgrading solves the problem without erasing the corrupted backup

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

Hi j,
I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin.

System no longer does session restore but when trying to configure, it does not provide me with the option to show windows and tabs from last session

Before I updated the latest version of Firefox, every time the browser shuts down in error, I would get the System Restore feature which was really nice. Now, this no longer happens and when I went to configure this ability, it does not even provide me with the option to select to show windows and tabs from the last session. How can I get the restore session feature working again?

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
* http://kb.mozillazine.org/Session_Restore
* https://support.mozilla.com/kb/Session+Restore

After Mavericks OS upgrade, can no longer make any HTTP requests with the OPTIONS verb

My machine can no longer make any HTTP requests with the OPTIONS verb. This happens whether I try it curl, postman, or ajax.
curl -i -X OPTIONS http://www.google.com returns curl: (52) Empty reply from server
It should return a long string containing a 405 error code.
I suspect that this is related to the Mavericks upgrade I did earlier this week. I only have one mac (my dev machine) with Mavericks. Other macs are Mountain Lion and they don't have this problem.
Can anyone else with Mavericks confirm whether or not they have this problem too?
If this is Mavericks related, anyone know of a fix or workaround?

Turns out that it wasn't Mavericks related at all. Cisco AnyConnect has a security module running behind the scenes even when you're not VPNed into anything. It was blocking my OPTIONS verb requests. I was able to make these calls after uninstalling.
Re-installing with Web Security turned off should prevent it from happening. While I was uninstalling I did notice that there was a web security uninstall script in /opt/cisco/vpn/bin but I already committed to taking the whole app off my machine. Simply running that script could have done it too.
I must give credit to Ben Nadel. It was his blog post that helped me fix this issue.
http://www.bennadel.com/blog/2559-Cisco-AnyConnect-VPN-Client-May-Block-CORS-AJA X-OPTIONS-Requests.htm?&_=0.10495476494543254#comments_44093

TS3297 I i downlaoded flashcards + with the top in app purchase of "US english female" for 1.99 and it shows the purchase with the option to download it for free then it comes back "Failure ?! Receipt verification failed !

I downloaded flashcards + with the top in app purchase of " US english female" for 1.99 and it shows the purchase with the option to download it again for free then it comes back "Failure ?! Receipt verification failed ! I have deleted the app and reinstalled several times and it still does not work !!!!I have a iphone 4s with the 5.1.1. Thanks

Lots of people having this problem. Flash card+ says this is due to a change in the Apple processes receipts... See posts on their facebook page. https://www.facebook.com/flashcardsplus/timeline?filter=2

Everytime i link my iphone up to my laptop the message 'welcome to your new iphone' with the option restore from back up or new iphone. i once did restore from back up and it deleted all my recent pictures, music etc. how can i get pass this stage?

everytime i link my iphone up to my laptop the message 'welcome to your new iphone' with the option restore from back up or new iphone. i once did restore from back up and it deleted all my recent pictures, music etc. how can i get pass this stage?

Hi Khuram1981 - thank you thank you thank you! All sorted! dont suppose you know how to fix another problem I have??? for weeks now, since updating to ios5 I think, for some reason every time I have tried to log onto app store it says CANNOT CONNECT TO ITUNES STORE. It's nothing to do with my computer, and I've been to the Geniius bar but they couldnt help and nothing I seem to do lets me update my Apps and even worse, I cant even buy any more. Any suggestions?
Again thank you SO much for helping with other problem = a real relief.
Chatterwind xx

The iPhoto library is a Time Machine backup, and so cannot be used as the main library. Reopen iPhoto with the Option key held down to choose another library.

I recently tried to look up my pictures on my time machine back up on an external hard drive. As soon as I try to open it I get the following message.
"The iPhoto library is a Time Machine backup, and so cannot be used as the main library. Reopen iPhoto with the Option key held down to choose another library."
I have tried holding down the option key but still couldn't few the photos.
I want to know if there is anyway I can actually view these photos. I have over 85gbs of photos on the hard drive. I have tried googling and looking at pervious forums with the same problem but nothing is working.
Please help!

Select Mac Help from the Finder's Help menu. Search for "Restore items backed up with Time Machine."

Create Folder with the name of expense report number in SHAREPOINT ?

Hi All,
iExpence - In expense report confirmation page. There is custom link.
Requirement
When user click on link, system should create folder with the name of expense report number in SHAREPOINT and copy copies of expense receipts in the created folder in SHAREPOINT.
Please suggest.
Thanks,

OAF no api as such for this kind of customization. Rather try developing some web service or something similar which can be invoked from the custom link to do the job.
--Shiv

Repairing Library Permissions: But the instructions didn't work clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Went to Help. But the instructions didn't work
clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Give this a try:
1 -be sure to have a current backup of the iPhoto library.
2 - download and launch http://www.macchampion.com/arbysoft/BatChmod.
3 - click on the File button, locate and select your iPhoto Library.
4 - check the Unlock and Apply to enclosed checkboxes.
5 - make no changes to the other checkboxes
6 - click on the Apply button.
OT

Create ALV with to containers with the option to drag fields

Similar Messages

Maybe you are looking for