Create an external HU with different packaging material type

Hi All,
Iu2019m trying to create an external handling unit with the material below:
Packaging material: 2892
Packaging material type: Z501
Material Group: Packaging Materials: Z501
But the system creates de HU with the Packaging material type: 0001 instead Z501.
My question is.. How can I set the material or HU to take the Packaging material type Z501?
Thank you for your comments,
Jaime S.

My problem has been solved. Regards

Similar Messages

  • App-V 5.0 SP2 (Office Deployment Toolkit) - Unable to create Project and Visio with different package ID

    We would like to create 2 App-V packages with the
    Office Deployment Tool
    - Visio Std 2013
    - Project Std 2013.
    The App-V packages are created successfully, the problem is that the package-id of both packages is the same.
    When we deploy for example, Visio to a client and afterwards Project, Visio gets replaced in App-V by Project.
    Is anyone else facing this issue ?

    So I wanted to bring everybody up to speed on some changes. You can manage multiple Office packages by generating different PACKAGEGUID attributes (https://technet.microsoft.com/en-us/library/jj219426.aspx?f=255&MSPPError=-2147217396)
    using the Office Deployment Toolkit BUT - the following still applies:
    Only one Office package can be deployed to a machine at a time.
    Only VL and Subscription Pro options are available for packaging via App-V.
    Steve Thomas, Senior Consultant, Microsoft
    App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
    http://blogs.technet.com/gladiatormsft/
    The App-V Team blog: http://blogs.technet.com/appv/
    The MED-V Team Blog: http://blogs.technet.com/medv
    The SCVMM Team blog: http://blogs.technet.com/scvmm/
    “This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”
    Steve is there any chance this stance may change, or is there any feedback we can give (we have already followed up with our TAM and have also put in tickets but effectively have not gone anywhere other then to explain what the model of support is)? 
    To be perfectly honest its a very hard model to support since users are licenses for Visio and Project separately, not to mention the lack of user publishing (targeting) and Office Standard support.
    We have put in advisory and problem tickets with MS for months in hopes of using the ODT packages in our non persistent VDI environment but I don't believe it will possible.
    In short if we have to separate our images or pools to support the various possibilities we are losing what App-V gains us: on demand (per user) publishing to limit the number of gold images we need.
    The loss of Office Standard support also leaves us in a tricky spot, because at the end of the day we have to find a way to support those users.
    Not looking to put you on the spot, just hoping there is a way to give effective feedback or discuss how to use the ODT packages in a way that makes life easier, not more restrictive.

  • Problem with Packaging Material Type

    Hello all Gurus,
    I have a problem with a packaging material type that I have created copying the standrad Packaging material type LEIH. I created a new packing material type ZPAC - Packaging Material copying LEIH.
    I then created a new material master record using this new material type ZPAC.
    When I am using this material for packing in outbound delivery document - VL01N, I am getting the following strange error message:
    20333 does not have packaging material type and is therefore not a pack.mat.
    Please suggest me why this error is coming and how I can rectify this error. Is there any further configuration that I need to do for packaging material types??? Kindly suggest.
    Thanks and Regards,
    Umakanth.

    Hi,
    Material type is not enough, you have to maintain proper master data as well as config.
    At least please maintain value in MARA-VHART for the packaging material. Please also check these links how HUM works:
    http://www.sap-img.com/sap-hu.htm
    http://help.sap.com/saphelp_crm40/helpdata/en/c8/a44b779f3211d2858d0000e81ddea0/frameset.htm
    Regards,
    Csaba

  • Please help me creating a new listener with different port#.

    I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
    But that is not happening.
    here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /apps2/oracle)
    (PROGRAM = extproc)
    LISTENER1 =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
    When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
    Please help me creating a new listener with different port#.
    Thanks,

    marist89 wrote:
    sb92075 wrote:
    marist89 wrote:
    sybrand_b wrote:
    The listener is a broker only and doesn't play any role in normal communications.
    It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
    Just because you can do something, it does not necessarily mean it should be done.

  • Is it possible to create a customer master with different address

    Hi Gurus,
    Is it possible to create a customer master with different address as we maintain in SAP CRM.
    Kindly help me onthis issue \
    Regards
    Kannan

    Hi Kannan,
    There are no multiple addresses but you can use multiple unloading ponts for the same address for the ship to Party.
    So when you create a Sales order the system will give a pop up with the unloading points allowing you to select the desired one.
    I hope I understand your query correctly.
    Regards
    Yogesh

  • BAPI/FM in ECC to create a sales order with variant configurable material

    Hi all,
    I need to create a function module that creates a sales order in ECC with a variant configurable material.
    can some one tell me if there is a in built function module or BAPI that i can make use of to create a sales order with variant configurable material in ECC.
    Regards,
    Jessica Sam

    Thanks MxG,
    I dont know how to use this BAPI. .Can you suggest me a sample code.
    My reqmnt is, i have
    Sold to party, ship to party, bill to party , VC config material and all char values that should be populated while creating a sales order.
    please help me with what values should i populate in i/p paramters and and how to use this BAPI with some sample code if posible.
    Regards,
    Jessica.

  • BAPI/ FM in CRM to create a sales order with variant configurble material

    Hi All,
    I need to create a sales order using variant configurable material in CRM not manually through GUI. I need to develop a function module that will create sales order using variant configurable material in CRM .
    Can some one tell me if there is an in-built BAPI/Function Module availabe in CRM to create sales order using variant configurable material in CRM .
    When i researched i found that there is a BAPI 
    BAPI_BUSPROCESSND_CREATEMULTI which can create a sales order in CRM.
    I dont know if this can create a sales order with varinat configurable material in CRM
    can some one guide be how i can build a function module in CRM which generates a sales order with variant configurable material.
    Regards,
    Jessica Sam

    Jessica
    I am not a CRM expert and am still learning. But you can try the BAPI CRMXIF_ORDER_SAVE and see if that helps.
    Good Luck
    Ram

  • Connect 2 externa monitors with different resolutions?

    Is it possible to oonnect 2 external monitors, with different resolutions to a mbp pro?
    I've read some about the "matrox solution", but that one requires that the monitors uses the same resolution.
    And, just to be clear, I don't want to just duplicate the screens, one should be primary.

    You may want to phone OWC and ask whether what you want to do is possible if one monitor is connected to the mini-Displayport and the other is connected to a USB port using this adapter:
    http://eshop.macsales.com/item/Other%20World%20Computing/VIDU2DVIA/
    Note that the OWC adapter, like most USB video adapters I've seen advertised, is limited to a maximum resolution of 1600 x 1200, so you won't want to use it with a monitor whose native resolution is higher than that.
    Message was edited by: eww

  • Packaging material type

    I have created material using the material type VERP
    this is a packaging material & I want to add packaging material type in the material master but i am not able to find this field there can you guys please tell me the exact view wherein i can mention the packaging material type

    I have used Material type  VERP  for creating the material.
    let me clarify 1 thing i.e. packaging material type and material type VERP are two different things
    packaging material type is  field in material master and its not the one which comes while creating the material as that is material type
    and this is my packing material  in which i want to pack the material X(FERT)
    As per my understanding the Material X will carry the packaging material group  and the packing material must carry the  packaging material type  becuase in the config (logistics execution> shipping> allowed packaging material type per material group) packaging material type is having certain allowed material group.
    due to this config i can pack my material X only in certain type of packing materials

  • Can we increase the field length of Packaging material type description

    Hi,
    The field length allowed for packaging material type description is 20 characters. If i need to have this length to be increased to 25-30.Is it possible?
    I mean the description that we give when we create new packaging material type.
    Pls let me know ur suggestions.

    Hi Dhilipan Nair,
    Unfortunately there is no standard way to change this, the desc. field of the view (V_TVTY-VTEXT) is created from the value T685T-VTEXT which has been defined with the Domain TEXT20, so in order to add addition characters to this field, you would need to redefine the preceding field type.
    Regards
    Stephen

  • Restricting issue of goods to cost center with respect to material type

    Dear Users,
    I have a requirement like we want to restrict issue of goods to cost center with respect to material type i.e., we want to issue goods to cost center only through reservation and that too only for specific material types. Is there any standard solution for this, please provide your suggestions.
    Thanks,
    Manoj

    Hi Ajay,
    Thanks for valuable input.
    I also thought in the same line , but user has the following concern on this:
    Assessment Cycle: As per Users, it cannot be used because this will allocate based on allocation basis. But they need, the values that was posted at the time of transaction and as per materials. So it wont be accurate through Assessment cycle,
    OKB9: They have different Cost center for different valuation area for the same GL Account.
    Hence through OKB9 also, we cannot post directly to COPA.
    That's the reason the above option were not adopted.
    My other concern to this is:
    In CKM3, we have two lines under consumption, one for Normal sales PGI and other is Cost Center.
    After doing revaluation of consumption in CKMLCP, we see one line under Cost Center :Revaluation of Consumption Figure"
    My question, where can I see that figure whether in any table or in Cost Center report??
    If that is also available we can try to match those values and post to COPA.
    Let me know your thought on this.
    Thanks and regards
    Kami

  • Packaging material type-SU type

    Hello to all
    While manually packing / repacking HU for outbound delivery against customer order the error "Packaging materail type XXXX in warehouse ABC is not assigned to SU type"
    On checking the customising setting at "Logistics General >HUM>Basics>WM>Assign Storage unit type to packaging material type" I found that there is no assignment of Pkg mat type to SU type.
    Please confirm (as I am under the belief that this setting is relevant only when HU has to be automatically packed for moving into warehouse) if the above customising  controls the error as I do not have access to test by changing the customisation.
    Thanks
    Prasad

    Hi Prasad,
    Even you do the manaul packing also. system checks the validation for  SU type with HU type
    regards,
    Ramana

  • Mandatory fields With reference to Material types

    Dear Gurus,
    I need to make few fields as mandatory with reference to material types while creation of the material master data.
    For example:
    For Semi finished and Finished Schedule margin key is required(mandatory)
    For Raw Materials Schedule margin key is optional.
    Regards,
    Siddharth

    Hi
    find  following step to make field mandatory for material type
    Follow the stpes for making field as optional, required entry
    1 click the tab ,(Which is u want to be Required entry )and get the field name by pressing F1 key and then
    2.Go to T.Code: OMSR and enter that field name and get Selection Group
    once you get selection group and field name
    3 Use t.Code: OMS2 and click your material type and in next screen check Field reference ( you have assigned for material type; example :;For ROH material type the Field reference is ROH
    3. Use T.code:OMS9,, Double Click your Field Reference and select field selection Group , & select round box of Required Entry or optional and save
    check following link you will get clear idea [How to configure the fields required for each Material type ?;
    Regards
    Kailas ugale

  • Packaging material type and packaging materials

    Hello all,
    I would like to know how to generate specific means of transport based on packaging material type and packaging materials.
    Thanks,
    Maxx

    can we know answer for your qtn?

  • Defining Packaging Material Types

    Hi all,
    Pls help me to resolve this problem. I want to define Packaging Material Types. When I define the 3rd record. There is an error: Entry B 000001 does not exist in T683 (check entry). The point stand at OutputDet.Proc. field. The first and second record, i also enter the exact this value, but no error.
    What do i do?
    Thanks,

    Dear Quang
    1)  Check in Material Master Sales: sales org.1 whether you have maintained Delivering Plant
    2) Check in ovx6 whether plant is assigned to sales organization and distribution channel
    3)  Check in ovf0, whether you have assigned Business Area to Plant and Division
    thanks
    G. Lakshmipathi

Maybe you are looking for