Create an image / map of folder structure in Finder

Hi there,
I am reorganizing some data that I want to make available for others later on. In order to facilitate the transition for them it would be extremly helpful if I could create a map of the folder structure. I am thinking of something like a mindmap which shows a folder and then each subfolder underneath it. It doesn't need to show the actual files within those folders.
Is there any way to have something like that created automatically? Or maybe some software (freeware would be best of course).
Thanks a lot,
Sebastian

Duplicate post: http://forums.adobe.com/thread/1338701?tstart=0

Similar Messages

Mistake creating an Image Map

Hello, I have a problem with my Image Map. Here are my steps:
1.Create areas for the Image Map
2.Create the Image Map with areas
3.upload the image
4.create the OTH file
5.Enable rendering information option
6.Create KM navigation iView and its layout set mode as default
All references for directories and for my pic are OK but it doesn´t show any Image Map. I need help please!
Thank you

Hi,
   You can follow this example:
In KM, image maps are used for a graphical depiction of folder contents. These objects are displayed using graphics instead of in their normal text form.
Step 1 Determine the image you want to use for navigating. This can be any JPG or GIF file. In this example I will reference the file world.gif.
Step 2 Configuring an image map. Take your image file world.gif and place it in the system. For our example place the file in the path: ../knowledgemanagement/etc/public/graphics. The subdirectory graphics was created within the public folder.
Step 3 In the documents folder, create the following folders:
World
     Within the World folder, create the subfolders:
     North America
     South America
     Europe
     Asia
Note: you can create as many folders as you like. This structure will serve as the navigation structure for world.gif image map.
Step 4 Determine the navigation coordinates for the image world.gif. Any tool can be used, for this example the tool GeoHTML was used. It is a freeware tool that can be downloaded from http://www.fegi.ru/geohtml.
The following coordinates were determined for the folders:
     North America: 253, 255, 303, 285
     South America: 424, 171, 474,201
     Europe: 368, 43, 418, 73
     Asia: 276, 37, 326, 67
Step 5 Create new link-sensitive Areas for the image map. Menu path: Configuration -> Content Management -> User Interface -> Image Maps -> Areas
Please note, an area would need to be defined for each area on the image map that would be link-sensitive areas.
Step 6 Defining an Image Map. In this step the name of the image map will be defined as well as specifying the path of the image, the tooltip, and lastly assigning the areas.
Step 7 Configure an Object Type Handling (OTH) file for the image map. OTH files are located in the /oth subdirectory within the /etc repository. Copy an existing OTH file in this subdirectory and copy it to world.oth. In This OTH file, define the navigation path, collection renderer, layout controller, action and image map. The OTH file should look as follows:
<?xml version="1.0"?>
<ObjectTypeHandler Name="Image Map world"
Class="com.sapportals.wcm.service.objecttypehandler.GenericObjectTypeHandler">
<SelectionCriteria>
<Paths>
    <Path>/documents/World</Path>
</Paths>
</SelectionCriteria>
<Properties>
<Property Key="rndCollectionRenderer"              Value="ImageMapRenderer"/>
<Property Key="LayoutController"                   Value="DefaultLayoutController"/>
<Property Key="rndShowActions"                      Value="false"/>
<Property Key="rndMap"                      Value="MapOfWorld"/>
</Properties>
<Actions/>
</ObjectTypeHandler>
Step 8 Display the image map. For the navigation iView that is being used, ensure that the iView property Layout Set Mode is set to default.
Step 9 Reload the object type handler in order for the system to read the new oth file world.oth. This can be done by within the Rendering Information link in any navigation iView for a user that is specified in the Debugging Settings (this is done in the user interface configuration).
Another option to reloading the object type handler would be restarting the J2EE engine.
Step 10 In the navigation iView for this mage map, navigate to the image map. In this example, the menu path would be documents/World
Patricio.
ps: If you want I can send you complete example.

Problem creating several image maps (linking to different pdf files) RoboHelp 8

Hi,
I have a problem creating several image map hotspots (that link to different .pdf files), from the same image using RoboHelp 8 HTML (WebHelp project).
After compiling, the first image map hotspot created, opens the .pdf file correctly. Unfortunately, when clicking on the other image hotspots, I get an error " Cannot find file...<file path>... Make sure path or Internet address is correct".
All the pdf documents are located in the same folder within the project.
Can anyone help?

Have you added the target files as baggage?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Can you create an image map that will link to a different element on the same page?

I have used image maps before and know how to create an image map to link to a new page. In this case, however, I want to be able to click on my image using an image map and load a new image with text on the same page as the image map. Is this even possible? Is there some sort of behavior that allows you to create same-page links, perhaps using AP divs? I want the end result to be a type of gallery that loads different images depending on where you click on the main image.
Again, I don't even know if this is possible. Any suggestions on how to make this work would be greatly appreciated.
Thank you!

Go to this site and mouse over the image map of South America.
http://alt-web.com/testing.html
Is that what you are looking for?
Insofar as linking to a position on the same page, do a Help search (F1) in DW for "named anchors."
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Can you create an image map hotspot for an external URL in Dreamweaver CS6?

Can you create an image map hotspot for an external URL in Dreamweaver CS6?

Duplicate post: http://forums.adobe.com/thread/1338701?tstart=0

Can iDVD create disc images from VIDEO_TS folder, and burn them?

That first question is pretty self-explanatory.
Background is this: I've downloaded some video folders/files from forum/torrent trading websites. When finished, I have a VIDEO_TS folder, often an EXTRAS_TS folder as well. A while back, I downloaded the app DVD IMAGER to create a disc image. Yesterday that stopped working effectively, so maybe I need to re-download, but I was wondering if there's just a better way? I also downloaded the app called BURN, but can't see yet how that creates disc images.
Once I create that disc image, I need to burn it, and I was using Disk Utility for that. I'm really looking for some help and advice on the best way to perform these processes.
Thank you, and let me know if I need to post in another forum.

Additionally, do you have experience w/ DVD Imager?
Nope. Like I said, Roxio's Toast Titanium is the top application (and is probably the one that most experienced people use).

Creating colour image map from an array of integers

not really that relvant to swing, or in fact java even but i wasnt sure where to ask it so:
i have an array of integers that represents information about each pixel in an image. i.e. for every pixel there is an integer value.
at the moment i create another image from a quantised version of these integer values, which gives me a greyscale image, where black is low intensity info and white is high.
however what i want to do is create a colour image like you see, for example, on weather forecasts. where low intensity info is blue, then purple, then red, orange, yellow and then white being the highest.
i need some kind of algorithm that does this. does anybody have some code that does this already?
thanks
kevin

sorry for not replying sooner sniper. thanks for your help but i have solved the problem:
thanks to my mate marc for the code.
import java.awt.Color;
/** Class to assist in assigning color to a mathematical value.
* Data values must be normalized.
* @author Marc Ramsdale
* Written 20th August 2003
public class ColorScale {
     /** Receives a normalized value (between 0.0 - 1.0)
      * The constructor then creates a colour according
      * to the selected colour scale.
      * If value is outside range 0.0 - 1.0 colour is java.awt.Color.BLACK
      * @param double value - (between 0.0 - 1.0)
     /** Maps the normalized value to a color
      *      BLUE      *
      * GREEN    *      *
      * RED           *
     public static Color generateColour(double value) {
      double red = 0.0;
      double green = 0.0;
      double blue = 0.0;
      Color color;
      int gradient = 4;
      int offset1 = 2;
      int offset2 = 4;
          if((value >= 0.0) && (value < 0.25)) {
               red = 0.0;
               green = value * gradient;
               blue = 1.0;
          else if((value >= 0.25) && (value < 0.5)) {
               red = 0.0;
               green = 1.0;
               blue = -(value * gradient) + offset1;
          else if((value >= 0.5) && (value < 0.75)) {
               red = (value * gradient) - offset1;
               green = 1.0;
               blue = 0.0;
          else if((value >= 0.75) && (value <= 1.0)) {
               red = 1.0;
               green = -(value * gradient) + offset2;
               blue = 0.0;
          return new Color((float)(red), (float)(green), (float)(blue));

I want to upgrade, when I download I don't get to point where I'm to drag icon into image of app. folder. I find it on desktop , when I drag it over it replys with " Do not have sufficient privilage for some of these items" I have a Mac.

I want to upgrade firefox, when I download I don't get to the point whre I drag icon into the image of Application folder. I can find it on my desktop and when I drag it over it replies "Do not have sufficient privilages for some of the items" I use a Mac.

The version you are currently using, Firefox 3.6.13, is the latest version of Firefox for OS X 10.4
If you are trying to use the Firefox 4 betas, they require at least OS X 10.5. There is a third-party version of Firefox 4 beta that works on OS X 10.4, for details see http://www.floodgap.com/software/tenfourfox/

Create DDP image from VIDEO_TS folder

Hi. I have a mastered DVD-R for DVD-5 replication. The replicator is requesting a DDP image - can I create a DDP image with DVDSP4 from the VIDEO_TS folder? Or from a disc image of the DVD? I don't have the DVDSP project - just the disc. The replicator is waiting! Any help greatly appreciated!!

Eric,
OK. It may seem like I took off a little on you, and it's true, I’ll admit. But let me fully pour out the real reason that caused my replies, and address the underlying injustice that I believe you’ve done to me personally, to King and Jonathan in the threads here, and to the DVD industry as a whole; not to mention to yourself.
I saw your offers to do jobs here for two good authors. The first thing I did was to go to your brand new website. I was shocked and dismayed to see some of its contents.
Where do I begin?
(For those who want to follow along: http://www.poweragemedia.com/services.html )
First, your “one man shop just wanting to help out and not charge”, is advertising on that site that you have Eclipse, MEI DVD-Video Verifier, Sonic Scenarist, and player banks – all capabilities I have, and that I know you are not licensed for and/or do not have - any of them. So, It seemed that site was trying to say it had the same capabilities I have.
Unbelievable!
On your “Services” page under “Pre-Mastering and Disc Verification” you say:
“With a final MEI and Eclispe report, you can be assured your title will be replicated without errors or issues. These reports check your disc's file structure and DVD specification compliance. In addition, we delivery all our titles on Type IV DLT tape - the replication standard.”
Btw, two mistakes with the above quote – you misspell Eclipse, and no report ever checked any file structure or DVD Specification compliance.
If this were true what you advertise, and that you indeed, have Eclipse and MEI, then you would have never heard a peep out of me, and you would be offering King and Jonathan a great service.
But since I am the one with this capability in house (it doesn’t work cost and time-wise to try to contract these several testing services to others; that's why I can offer such a reasonable price to everyone), and am licensed with those tools, to see someone else I know that doesn’t have them, advertises to my market that they do, does cause a situation (to put it mildly).
So, I repeat from my last reply, ‘what are you thinking, Eric?’
And then, under the “Quality Control and Player Compatibility Testing” heading on the same Services page you say:
“With several year experience and testing under out belts, your disc will have the widest player compatibility worldwide. We've developed our player banks based on proven data gathered over the last several years. This service was once only offered to major theatrical releases until now.”
Since you seem to not have been truthful with the other capabilities you advertise, I’m going to have to question that you even have a player bank (I know you don’t have player “banks”). Oh, and you know that I’ve been offering player bank testing services for at least two and a half years already, why would you say “This service was once only offered to major theatrical releases until now”?
The other services on your site, especially your “Complete Re-authoring Services” where you say:
“Our most unique service! We Specialize in re-authoring or amending discs from which the source files have been lost or corrupted. Using only your VIDEO_TS or image file, we can add logos, change menu attributes, speed up functionality and compatibility and even add or change subtitles.
This service is often useful to distributors who have recently bought older titles and wish to add their current logo or make other amendments to a disc.”
This is also especially dangerous, as you’re talking about making radical changes to the structure of third party clients’ DVDs, and with no tools to check to see what you’ve done is correct!? Early on, during DVDAfterEdit’s development, I was testing customer’s projects to make sure their changes were good; some of them went into runs of over a million. The idea for TFDVD Research Labs sprung up during this time, as I could see I was helping unleash a great power, but I knew a lot of folks could get in big trouble. I spent the $10,000 to get the MEI License and dongle. I would be disrespecting my customers if I didn’t have it.
Importing a simple VOB into another DVD, by itself, can cause lots of errors, if you don't know where else in the data to make some setting changes. I better stop with the description right here of what all could go wrong with adjustments in DVDAfterEdit, if one doesn't know what they're doing and have the verification tools.
Am I not being consistent here? If I ‘jump’ on you for simply writing a third parties Image to DLT without verification tools, wouldn’t I be amiss if I didn’t call you on your falsely advertised ability to make and then verify massive changes to a good authors DVDs?
So, Eric, what am I to think? How am I to respond? Do you see how I might think of this website of yours as ‘stealing’ from me, due to even a perceived 'illegal competition' (of course I know you're not competing with me!)? For sure, as is, your website takes from me my site's uniqueness, as far as listed capabilities, even if your site the way it is a lie.
I’d be more than happy to help you get licensed with those tools. For sure, there would go your “do it for free” attitude in a heartbeat, when you lay out that kind of expenditure! And then you could be right with any clients; not to mention me.
And as far as whether or not all projects should go through me, you’re right, they don’t have to; only the “doomed from the outset” Images should be sent to me, so I can prevent disaster for the production company (I’ve seen three company’s go under over the years from Disc playback blowups in the market and repeated Image submission failures; and too many bad studio/client/lost client situations to count). But since the authoring studio, nor you, is going to know which Images are the bad ones, it follows that they all be sent to me; which is the best advise someone can give an author that inquires - trying to be a 'nanny' won’t help them; both of you are put at risk.
So, I hope it's clearer now: That you started offering to do services here, and at the same time put up a new website with fictitious major capabilities, the whole of which only I offer in our industry; I felt it my duty, as well as to act for legitimate business reasons, to say something.
I fully expect you to make things right,
Thanks,
Trai
Trai Forrester
TFDVD Research Labs
<edited by host>

Library creating a new duplicate folder structure

I am using 2.0 on a Mac. Recently I moved all my data files including photos and lightroom catalogs from an external to an internal drive on my MacPro and renamed the new drive with the same name as the external and changed the external name and it became a backup. Lightroom continued to work just fine, seeing all the images with no problem. If I do a "Show in Finder" it shows me them on the internal HD. However, when I import a new image or even import an image or folder that has previously been imported, LR brings it in within a new folder structure that uses the same hard drive name.
My actual hard drive folder structure for my data drive is something like HardDriveName/Graphics/Airshows/image.jpg with all my images in a Graphics folder and within that a series of folders and subfolders.
Previously if I imported a new folder, LR would show HardDriveName/NewFolder and I have several folders of imported images with that structure. It did not include the /Graphics folder because I never imported the entire Graphics folder. Now however, after importing a folder, LR created a new folder structure in the Library with a duplicate of the HardDriveName and it included /Graphics.
I went to the first folder structure and picked a small folder and made a change to an image to darken it a great deal. Then I imported the folder all over again and it imported it to the new folder structure but the dark version was not visible. I DO have automatically write xmp data checked.
If I right click on any image from either folder structure LR shows me the image within the same hard drive where my original are found.
I don't want to have two folder structures and apparently if I re-import all my images LR doesn't see the xmp data. I tried to tell RM to read the xmp data from the image I had changed after it came into the new folder but it did not show up. If I manually tell LR to Save Metadata to File for a folder in my original structure and then go to the same folder in the new structure that LR is showing and tell it to read metadata it will show up in the new folder. I have a folder with 32,000+ images and thousands of other images.
I would like LR to continue to bring images into my "old" folder structure but that may not be possible. Any help?
Interestingly I have more than one data drive. This problem does not seem to be happening with my other data drive that I also swapped to an internal configuration.
I put a pic of my folder structure at http://www.pbase.com/santa/image/101246417 to illustrate the issue. My harddrive name shows as Brandon.
I spoke too soon. LR seems to be creating a new folder structure for two of my three hard drives and adding images properly to one of my three hard drives. All three were new drives with the names changed to match the old drives.

yes I did update camera raw. I think LR 2.0 asked for that. I did a search on "duplicate" and found no answer to my problem. Anyone with a link to any useful information?

CSS Header - how to create image map on header image?

So I am pretty new to CSS. I created a tag <div id="page_header"> and then have an image called "header.jpg" that shows up fine. But now I want to make that header clickable so I can use it as the link back to the home page. If it were a basic image, I could create an image map. But since it is a CSS file, I can't figure out how to do this. I know this has to be simple!
Thanks for your help,
Gary

Thanks - so I would insert a transparent gif the same size as the header area (1000 X 300) the same way I would if it were a regular image? Does this go before the <div id="page_header"> tag?
Inside the div.
<div id="page_header">
<img src="your_transparent_image.gif">
</div>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.com/blogspot.com

Creating categories / hierarchial folder structure

HI,
I have created a query based taxonomy. What I find is the classification happens with same name as taxonomy name. If I need to add a folder structure for the classification to happen, how should it be done.
The documentation says"Now create the categories of the taxonomy manually in the form of individual folders. You do this in the Category Browser iView (Content Manager -->repositories --> Taxonomies). Name the folders and create a new folder hierarchy targeted to your needs."
However, I do not find that path. Please advise where and how exactly is this done.
Thanks and regards,
Arun

Hi Arun,
let me just give u the steps for the same:
1) Create an index(classification) which will point to the repository created by you.In the Taxonomy specify a 'Query Based' Taxonomy.
2) Go to Content Management> Classification>Taxonomies. Open the folder(the taxonomy which you have created). Within that you will find another folder(the index which you have specified).Within this folder, create the folders(the required folder structure for classification).
3) Go to Content Management> Classification>Taxonomy Query Builder.Select your taxonomy and accordingly build the query as per your needs.
4) Once you have built the queries, go to actual path of that particular folder in Content Admin-> km content and upload a file which is in accordance with the built-queries so that the file will be classfied.
5) Now go to Content Management> Classification>Taxonomies and you will be able to see the file in the required folder(once it has been indexed).
Regards,
Prathamesh

CS4 will not create poly areas in image maps

How do I create an image map which will contain polygonal areas? I've selected my shape and chosen "polygonal" in the Attributes palette and then given it a URL. When I create an image map from the file, all my map areas (in the HTML) are "rect" (rectangles), which is not what I want. Can someone talk me through how to create a polygonal image map area which successfully gets exported into the HTML?
Thanks.

I am not an expert at this but I just created a polygon shape over a rectangle selected the polygon shape and added the url in the image map url field.
then I used the slice to to make the rectangle a slice and then selected the polygon shape and made that a slice and exported as jpeg from the Save for Web and Device as both html and image in the jpeg format.
all seemed to work the rectangle and the polygon are the same color so you can not see the shape but only the polygon shape seems selectable.
I just changed the color and it does only make the polygon shape selectable
here is a little video perhaps this will help.
http://mysite.verizon.net/wzphoto/Imap.mov
so let me see if I can summerazie what I did.
I made a rectangle then I made a polygon shape over it. I selected the polygon and gave it the image map attribute with the url
and save the file, I then sliced the art first selecting the rectangle and clicking on the rectangle with the slice tool then select the polygon and clicked on that with the slice tool as well and save for the web as jpeg with image and html as the option.
S that is what i did and it seems to work fine.

Unable to Create Image Map Hotspot

I've got a GIF image inserted into a RoboHelp HTML 8 topic and am trying to create multiple image map hotspots on the graphic. I successfully created the first hotspot (a rectangular one). When I try to create the second, the crosshair cursor displays, but when I drag with the mouse, it fails to draw a box outline. When I release the mouse, nothing happens.
This behavior is erratic. Sometimes, if I close and reopen the topic, I can draw a hotspot. Other times, if I complete exit and re-launch RoboHelp, I can draw a hotspot. Is this a bug, or is there something I can do to make it work more effectively?

Do you have many other hotspots in this topic?
Do you have other dynamic HTML in this topic (Related Topics, See Also, drop-down text, etc.)?
Have you been performing a lot of Cut/Paste operations prior to experiencing this issue?
Have you ever hit multiple keys in this topic and caused a RH crash?
RH places numerically identified data in the <HEAD> section for dynamic HTML entities, in addition to the related, numerically matched code that resides in the BODY section. At some point, these numeric matches can get corrupted (the old fat fingers causing a crash trick, for example). The only cure to that is to delete all the HEAD and BODY data, and then start over. Sorry.
Good luck,
Leon

Integrating image map in iWeb?

I've created an image map with MapSpinner and have it saved as an HTML file. Is there anyway this can be integrated into an iWeb page like, say, a QuickTime movie or a Photo? Or am I going to need a hyperlink that points to an external page/site?

Put the html file (map-name.html) and the image file that you created the map from in a folder
Give the folder a name like iMageMap and upload it to the root folder on your server so that the URL to the html file is...
http://www.website.com/iMageMap/map-name.html
Use an iframe code in an html snippet to get the map onto your page.
<iframe src="URL to the map-name.html" width="600" height="400" frameborder="0"> </iframe>
Adjust the width and height to the size of your map image file.

Create an image / map of folder structure in Finder

Similar Messages

Maybe you are looking for