Create and assign new user in SRM org struct when HR Distribution is active

Hello experts,
In SRM HR Distribution list is active.
Now requirement is we want to create new user in SRM and assign it with the SRM Org structure.
1.)Do i need to create a user in SRM and in ECC HR i mean in both the system or in ECC-HR only.?
2.)When user is there in ECC-HR system then how i can assign user to SRM Org structure. Is there any FM or Standarrd Program ?
Thanks!!
Sunny

Hello Sunny,
As you mentioned HR distribution is active hence you need to create the user in ECC environment and assign it to the org. structure in ECC.
Again there would be few user which you would create in SRM evironment and those would be administator specific.
Activating pointers for HRMD_ABA message allows to replicate all changes made to the organizational structure in HR to SRM.
Changes in HR structure include modifications (add/modify/delete) in the following:
u2022  Organizations
u2022  Jobs
u2022  Positions
u2022  Employees
A change in the relationship of any of the elements above will also be replicated to SRM. For instance, an employee changing units will be reflected in SRM.
Pre-requisite: SU01D ID should exist prior to replicating the concerned user in SRM.
Thanks,
Yatin

Similar Messages

  • Steps to create and assign new cost centers?

    Dear all,
    Pls share with me the steps to create and assign new cost centers.
    TIA
    kogi

    Refer to the following link, will help you with the cost Center creation.
    http://help.sap.com/saphelp_470/helpdata/en/08/5145cc43b511d182b30000e829fbfe/frameset.htm
    It is actually the job of Fi consultants.
    Post your e-mail ID I will send some documentation.
    Regards
    AK
    Reward points if helpful

  • Roles Creating and assigning to user

    Hi all,
    Am creating a role as venki & granting some privileges to that role i.e, create session,create table...
    Then am creating a user & assigning a role "venki" to the created user.
    then after connecting to the user am unable to create a table in that user, am getting privilege problem..
    Please give a solution..
    Thanks in advance..
    Edited by: Venkateshj on Jan 1, 2013 3:32 PM
    Edited by: Venkateshj on Jan 1, 2013 4:12 PM

    JohnWatson wrote:
    The answer you have so far is not necessarily correct. You have granted RESOURCE to the role, and RESOURCE includes an implicit grant of UNLIMITED TABLESPACE. See this:orcl> create role venki;
    Role created.
    orcl> grant connect,resource,create table to venki;
    Grant succeeded.
    orcl> create user tpt identified by tpt default tablespace users account unlock;
    User created.
    orcl> grant venki to tpt;
    Grant succeeded.
    orcl> conn tpt/tpt
    Connected.
    Session altered.
    orcl> create table app(sname varchar2(9),sid int);
    Table created.
    orcl>there is no need to grant quota on a tablespace if the user already has RESOURCE, which is one reason why you should never grant RESOURCE to anyone. Clearly, there is sonething else going on in your database. Another indication that things are not as they seem is that in 11.2.x by default you do not need quota on a tablespace (or unlimnited tablespace) to create tables, because by default segment creation is deferred. So you get the error only when you try to insert into the table:orcl> create user me identified by me;
    User created.
    orcl> grant create session,create table to me;
    Grant succeeded.
    orcl> conn me/me
    Connected.
    Session altered.
    orcl> create table t1(c1 date) tablespace system;
    Table created.
    orcl> insert into t1 values(sysdate);
    insert into t1 values(sysdate)
    ERROR at line 1:
    ORA-01950: no privileges on tablespace 'SYSTEM'
    orcl>I think you need to investigate further. Things are not as they seem.Ok sir i'l investigate further, but my problem is solved.. By the above content i have to know why the error occurs in 11g..Let me check Once...
    Thank u Sir..

  • Create new transaction (Business Activity) and assigned to user Problem

    Dear sir,
    We already have the business activity with in T-code : CIC0, The transaction is  ZACT1 and assigned to user group1 .  It's working fine. However when I copy something from transaction ZACT1 and create to be T-code : ZACT2 . and assigned user group2.  There is the problem that when log on to CIC0 . It is the authorization from for transaction ZACT1.  WHen I go to su53
    it need to have the authoriazaiton on Business transaction type: ZACT1
    Please kindly advise.
    Thank you and best regards,
    Vimol

    When you create new transaction variant, original transaction remains as it is. During creation of transaction variant, when you go to one by one screen, screen variants are created. It uses variant name and can be see on each screen on the top.
    Once you complete trasnaction, you start using this transaction variant instead of original transaction. In SHD0, there is button on the top 'assign screen variants' which allows you to assign all screen variants created above. You can refer help file which i think has procedure to do this.

  • Remove PR Mandatory for PO and Assign new PO Layout to one User

    Hi Experts,
    I want to remove PR mandatory for PO and assign new PO Layout for one User. I am facing following problem.
    1. I have already created a function authorisation Z1 with reference to PR and assign the same in SU01, Paramenter EFB - Z1.
    Now I have removed ref to purchase requisition tick and assign new PO layout in Z1.
    But ref to PR not removed, and new po layout is not coming.
    What should I do.
    Thanks in advance.
    GR

    why dont u assign the new PO screen layout to the PO document type thru spro-mmpurchasingpo-define document type---here assign ur new field selection with the PO document type coz whatever the screen layout of PO comes while processing me21n,it comes due to the field selection present here as per my knowledge.
    regards,
    indranil

  • Can I change two devices of my Id and assign new id's and still access the same cloud.

    After ISO8 my sons iPad rings when I receive a call. I have two 5c's and an iPad under one apple id. Can I assign a new id to my wife's phone and my son's iPad and then all of use the same cloud under the new update? Will my wife lose her contacts? Im thinking what I need to do is start both devices from scratch and assign new id's with different emails and then add them to family sharing. Am I correct here, I just want to verify before attempting so I do not lose anything or create unnecessary backlash in my direction. Thank you for any assistance

    If your goal is to stop your son's iPad from ringing when you receive a call, all you need to do is go to Settings>FaceTime on his iPad and turn "iPhone Cellular Calls" off.

  • Reg: How to create and assign jco in xcm (CRM 5.0)

    Hi All,
    I have configured CRM 5.0 on Win/SQL.
    I am in the process of configuring IPC 5.0.
    I have made the cnahges as per the config. guide for IPC.
    I have to do some settings in XCM.
    For which I have to create and assign JCO in XCM.
    Which I am not able to do so.
    Please do advice and help.
    Rgs
    Vikas

    Vikas
    Good. I  will support you to my level best !!!
    <b>Assumption: U have the Admin User Id /Pass</b>
    The URL should look similar to this :http://<host>:53500/isauseradm/admin/xcm/configTreeSelect.do
    1. On the Left Panel, Select
        <b>Start --> Components --> Customer --> JCO</b>
    2. Now give the name of the JCO Customer component configuration and press ENTER
    3. Meanwhile Collect the Details of the SAP CRM 5.0 Server (<b>Client no,lang EN, System Nu,AS Host</b>)
    4. Pucth in the Appropriate details at the Properties requested in the JCO Property. Go with <b>group_connect</b> in <b>Base Configration</b> prperty
    5. <b>Save</b> the Config
    6. Press <b>TEST RUN button</b> for testing the JCO connection
       REsult will be:  <b>GREEN for Succesful Connection
                        RED for unSuccessful Connection</b>
    Hope this helps !!!
    Thanks
    Jack
    <b>Allot points if my post helps !!!!</b>
    Message was edited by: Jack

  • Assign / delete user to EBP Org ID

    Hi all
    I have assigned one user to wrong org id, then I have deleted from that org.
    Now I am trying to assign user to other organisation.
    There I am getting no hits found when I searched for that user through organisation structure search.
    When im trying through su01 user_gen, there im getting "central user exist".
    can any one help how can I assing the user to org id.
    Is there any wat to delete central user?
    Thanks in advance,
    Regards
    Krish

    Hello,
    Go to TC SU01 , give the user ***  and display the details
    open the role tab and note down / take screen shot of the roles
    assigned to that user.
    Convert that user (SU01) to normal users using USERS_GEN
    check the role assignment to the user. Now go back to SU01 and check
    whether all roles are retained
    In BBPUM01 transaction assign some roles and save the same - after
    this check the role assignment to the user. - Now also check whether
    the roles (non - EBP roles ) are retained in SU01.
    Also please check
    http://help.sap.com/saphelp_srm2007/helpdata/en/15/3451295f441a41a2d6ad15ec940142/frameset.htm
    I hope this helps.
    Kind regards,
    Gaurav
    Edited by: Gaurav Abrol on Apr 10, 2008 1:03 PM

  • Problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2

    Hi experts,
    I'm getting problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2.
    I have a scenario where is defined the document type ZC1, document part 200, authorization group 0002 and for all of these  documents the storage category "Cofre DMS1". And the status which demands the storage category is 'FR'.
    I've been fullfiling the BAPI_DOCUMENT_CREATE2 in this way:
    "Tables
    data: it_doc like bapi_doc_draw2,
          it_return like bapiret2,
          it_files like bapi_doc_files2 occurs 0 with header line,
          it_objs like bapi_doc_drad occurs 0 with header line.
    "Variables
    data: wl_doctype like bapi_doc_draw2-documenttype,
          wl_docnumber like bapi_doc_draw2-documentnumber,
          wl_docpart like bapi_doc_draw2-documentpart,
          wl_docversion like bapi_doc_draw2-documentversion.
    it_doc-documenttype = 'ZC1'.
    it_doc-documentpart = '200'.
    it_doc-documentversion = '00'.
    it_doc-description = 'Test of documents creation via BAPI'.
    it_doc-username = sy-uname.
    it_doc-statusextern = 'FR'.
    it_doc-authoritygroup = '0002'.
    refresh it_files[].
    clear it_files.
    it_files-originaltype = '1'.
    it_files-storagecategory = 'Cofre DMS1'.
    it_files-wsapplication = 'PDF'.
    it_files-docfile = 'c:\110307.pdf'.
    it_files-description = 'Test file'.
    append it_files.
    refresh it_objs[].
    clear it_objs.
    it_objs-objecttype = 'EKPO'.
    it_objs-objectkey = '47000497600010'.
    append it_objs.
    CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
      EXPORTING
        documentdata = it_doc
      IMPORTING
        documenttype = wl_doctype
        documentnumber = wl_docnumber
        documentpart = wl_docpart
        documentversion = wl_docversion
        return = it_return
      TABLES
        objectlinks = it_objs
        documentfiles = it_files.
    After execute the BAPI process I got the following error:
    E26 087 - Data carrier COFRE DMS1 not defined
    Does anybody have a sugestion to help me, please?
    Thks
    David
    Edited by: David Tsutsui on Mar 18, 2010 10:52 AM

    Please refer to this thread, it tells why you need a data carrier you can also configure the same in DC20.
    Data Carriers for Storage the Originals of DMS

  • I have changed computers and the new user of my old computer wants to use itunes. i deauthorised the computer and uninstalled itunes. when he reinstalled itunes all my songs and apps are still there. how do i get rid of them for him?

    i have changed computers and the new user of my old computer wants to use itunes. i deauthorised the computer and uninstalled itunes. when he reinstalled itunes all my songs and apps are still there. how do i get rid of them for him?

    Erase the internal drive and install a fresh OS.
    (104285)

  • How to create and see the user interface of helloworld sample??

    hello friends,
    i have deployed the hello world sample
    now i want to know how to create and see the user interface of hello world sample.
    thanks and regards..

    If you go to bpel console host:port/BPELConsole (in a dev install, localhost:9700), click on your process, we will generate, based on the describing wsdl a UI for you ..
    hth clemens

  • How does APEX create and save new files. What extension does it save in?

    Hi can someone help me with this question?
    How does APEX create and save new files. What extension does it save in?
    Cheers!
    VJ

    It's really too bad we can't see VJ's face when the concept sinks in. This is one of my favorite moments when teaching APEX classes. Most people love it, some people don't. If nothing else it really proves the power and performance of the Oracle database. Each page view can generate 40+ queries, yet on the average system this takes less than .04 seconds.
    Keep in mind there are no undocumented features or "Oracle Internals" that the APEX team uses to achieve this performance, just sound database design. With every feature they add they evaluate how it will be used and design the tables and indexes to most efficiently answer the query. Sometimes this means going against "purist" normalized principals.

  • How to create and assign role

    Dear all,
    I want to create the role and assign.
    kindly let me know
    shailesh

    Please have a look at below link. It explains how to create and assign content ( roles, iveiws) in Portal
    http://help.sap.com/bp_epv170/EP_US/BBLibrary/documentation/N04_BB_InstallGuide_EN_US.doc
    Kindly assign points if helpful
    Regards
    Jayesh

  • Master Cost Centre - create and assign (steps required)

    Hi All,
    I am currently working on a IDES system. I want to create and assign Master Cost Centre. Please help me in providing the steps to create and assign the same.
    Regards,
    Chinmay

    Hi Chinmay,
    Cost Center creation is done by FI Team as that comes under FI module and lot of the other things need to be done. If you just want to create Cost Center you can go to
    Financials -> Controlling (CO) -> Cost Center Accounting -> Master Data -> Cost Centers -> Create Cost Centers
    Tcode for Creating Cost Center is KS01 and for changing KS02
    You also need to Activate Cost Center Accounting in Controlling Area
    Financials -> Controlling (CO) -> Cost Center Accounting -> Activate Cost Center Accounting in Controlling Area table V_TKA01_GD
    For assigning cost center to employee, you can assign it in IT0001 whihc is the master cost center and IT0027 where you can assign overriding cost center
    Hope the information will be helpful
    guds

  • How to find workflow and assign a  user to workflow

    Hi Gurus,
    How to find  the existing workflows, and assign a  user  to a role.
    <REMOVED BY MODERATOR>
    B S B
    Edited by: Alvaro Tejada Galindo on Jan 24, 2008 11:17 AM

    Goto Tcode PFTC.
    Select the task type as Workflow and serach.
    Naveen.

Maybe you are looking for