Create and Enable Find/Torch menu Button in Customized Form

Hello Friends,
I want to Create and Enable Find/Torch menu Button in Customized Form??? How can i do that? Please Help !!!
Thanx in Advance
Deepak Arora

Hi,
Please see the Application Developer guide.
Applications Releases 11i and 12
http://www.oracle.com/technetwork/documentation/applications-089559.html
Thanks,
Hussein

Similar Messages

How to enable File- Export menu item in custom Form

I have created a custom form.The File->Export menu item is disable by default.how can i enable this menu item? I have tried
APP_SPECIAL.ENABLE('FILE.EXPORT',PROPERTY_ON) at block level (when-new-block-instance ) and form level trigger(when-new-form-instance) but not able to enable the same.
plz suggest way to get this functionality in custom form.

Hi,
check below documents can help
Unable To Export From Files => Export menu option in Applications 11i [ID 275224.1]
Unable To File > Export Data From A Form [ID 552268.1]
Unable to Open or Save Export to a File [ID 218209.1]
Export Menu Item Under File Menu Is Not Bringing Up Dialogue Box Or Openning Up Document [ID 263348.1]
Regards

HT1657 I rented a movie and accidentally hit the menu button and now I can figure out how to go back and watch it . When I try to press rent again it says you have already downloaded this movie go to settings and check for downloads but I can find it.

I rented a movie and accidentally hit the menu button and now I can figure out how to go back and watch it . When I try to press rent again it says you have already downloaded this movie go to settings and check for downloads but I can find it download in settings.

I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh.

Is it possible to create a single texbox? and how to delete a button on a form? please asap, badly n

Is it possible to create a single texbox? and how to delete a button on a form? please asap, badly needed it right now. thx -regards gustavo

Hello Gustavo,
You can create a single textbox using the textbox option here (This is for you to enter text - not for the visitor): http://jingsite.businesscatalyst.com/jing/2013-09-30_2212.png
If you want to create a textbox for the visitors to enter text, then you need to enter a form, and you can delete the "message" field from the "simple contact" form, but not the name and the email fields (those are mandatory and can't be deleted).
You may want to check external forms in case you want to have the form rather customized, to check if you can have forms with single textbox. An example would be "Jotform".
Hope this helps.
Cheers
Parikshit

How to attach custom form LOV to find (torch symbol) button

Hi,
We are working on Oracle Applications 11.5.10.2. We are customizing new forms and registered with Oracle Apps, there are lov's on the form and we want to attach lov to the find button on tool menu.
Our requirement is when ever click on find button, it has to display all the values in the LOV. But our custom form is not reaching this requirement.
Please help us in this regard to make link between LOV and find button
Thanks in Advance...
Venky.

Hi,
I can you make your requirement a bit clear.
From the below text what I could able to understand is, when we click on the browse button(i.e. tourch symbol) it should dispaly a list of values from which we can select a values and the form will display the records pertaining to onl those records .Is that True?
Rgds,
Naveen.

I double clicked on something and now the Firefox Menu button has disappeared. How do I retrieve it?

I have been looking for information on how to save passwords. After I clicked on the Menu button, I double-clicked on an item in the list. Now the Menu button is gone. The name of the tab is at the top and under it the File, Edit... bar. I tried reloading Firefox hoping that the default setting would reappear. It did not.

Go to '''View''' then '''Toolbars''' and ''UNcheck'' '''Menu Bar''' [].
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Add search (torch) functionality with in custom form

Hi
I wanted to add search functionality (torch) in my custom form. How to do that? Any guideline or ez steps to follow to give serach on certain field of my custom form?
regards

Chapter 8 of developer guide helps a lot. Just wanna share if someone curious.
regards

When i browse with firefox the search results come up too small to read and I can't find any menu buttons (ie, can't find anywhere to zoom in or the view menu)

Have just got a new computer. Downloaded firefox as it has always been better than explorer and I've never had trouble on previous computers. It seemed to download okay. I set google as my home page. When I type a search phrase into it, the results page comes up too small to read. It's like it's normal but miniature. You know how google has google images, googlevideos, google maps across the top of it, if I click on the minature 'images' word, it comes up with the google images page but also very tiny. But if I click the mini 'videos' word, the videos search page is normal sized and so is the maps page.
It's driving me crazy because the initial page seems okay but there's no normal google stuff on that either, and then when I try to search for something, it goes tiny.

Hello Ashley.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
On the other hand, you may have Firefox configured to display fonts like that. Check Tools > Options > Content > Fonts & Colors and see that the font size is not too small. In my experience, sizes bellow 16 will be way to small to read.

Creating and Enabling Shared Mailboxes

Hi everyone,
I have a 10.4.10 mail server. I need to create a shared mailbox that various users can subscribe to. How do I go about doing this?
TIA!
Andrew

Hi Andrew
If you download the application and consult its Help file it should tell you how to use it.
What I like to do is to create a 'special' account that I use to work with mailboxes - mailboxadmin. Make sure POP and IMAP is enabled for that account first.
However you can use any account you like.
All that's required is you add the account's shortname to /etc/imapd.conf. I would make a backup of /etc/imapd.conf first. Once you've done that edit impad.conf and add the shortname to the admins entry. You should see cyrusimap already there. Add a comma and a space followed by the shortname and save the changes. Launch SirAdmin, add 127.0.0.1 to the address followed by the account details. Create an ACL for that user for desired mailboxes. Save the changes.
Use nano or pico or any command line text editor you like. Try not to use the Finder. If you find the command line worrying then you can use TextWrangler instead:
http://www.barebones.com/products/textwrangler/
Tony

I've installed Firefox 4 and under the Firefox Menu button on the top-left there is no option to set up Firefox "sync". Can you help me with this?

I thought I had registered before but had to re-register today. I tried to retrieve my old password using my [email protected] E-Mail address but got no response from Firefox.
I have an HTC Incredible Android phone and would like to use Firefox as my browser on it, and "sync" its operation to the Firefox application I use on my Apple iMAC. Can you help me?

Hi from Mozilla Services Operations. We just fixed an issue with the "forgot password" process. If you try to retrieve your old password again, you should receive an email at your account's email address with further instructions.

I cannot find the menu button. There is no way to sign in for the first time

I'm trying to update and cannot

Try this instead:
*Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
*Start the installation with a double-click on the desktop icon

Just started using mavericks and enabled find my mac now I'm unable to shut down my mac

i leave my mac on sleep mode n is eating up my battery
plz respond asap

Try resetting the SMC.
Barry

Disable and enable on Apex 4.2.1 tabular form

Hi,
I have a requirement on Apex 4.2.1 tabular form where It gets rows dynamically based on the master record.
when page loads for the first time all the rows on the tabular form should disable and based on check all rows it should enable all the rows
or if I check particular row it should enable that row. is this possible with dynamic action. or else how can i achieve this ??
Thanks

user10755387 wrote:
Hi,
I have a requirement on Apex 4.2.1 tabular form where It gets rows dynamically based on the master record.
when page loads for the first time all the rows on the tabular form should disable and based on check all rows it should enable all the rows
or if I check particular row it should enable that row. is this possible with dynamic action. or else how can i achieve this ??
You cannot disable them instead make them read-only, but the problem comes if you have any form controls like select lists because they are already read-only
Create a dynamic action as follows:
Event: Page Load
True Action: Execute JavaScript Code
Code:
//replace the REGION_STATIC_ID with your tabular form's region static id
$('#TF').find('.uReport.uReportStandard').find('tbody').find('td[headers!="CHECK$01"] > :input').attr("readonly", true).css("background-color", "#F2F2F2");
$('td[headers="CHECK$01"] > input').click(function () {
     if ($(this).is(':checked')) {
          $(this).parent('td').parent('tr').find('td[headers!="CHECK$01"] > :input').attr("readonly", false).css("background-color", "");
     else {
          $(this).parent('td').parent('tr').find('td[headers!="CHECK$01"] > :input').attr("readonly", true).css("background-color", "#F2F2F2");
});

Creating and organizing one large document from many small "forms"

I'm organizing a symposium and attendees submit abstracts.
I have set up a "form" using Word to distribute to people to fill out and named all the fields, example: "Title," "Firstauthor," "Body." Etc.
They are going to email me completed forms.
I was hoping that it'd be easy to make a drag/drop Script so that I can just drag and drop these files to create big document that would organize the abstracts & attendees into a program.
Word has the "catalog" creation option in the merge-manager. But it uses some sort of tab delimiting scheme for acquiring its data when it's going to be in the form of various fields and the field-names.
At my disposal, I also have File Maker Pro, but doesn't really seem to be able to do what I want to. I don't want to manually enter information (hundreds of attendees).
Could I make a script that would:
tell FileMaker to open a database and create a new entry
tell word to get from a field "FirstName" and copy to clipboard
tell filemaker to paste from clipboard to cell "firstname" of the new entry
....etc. with the other the fields .... and so on? to create the database in file maker. and then in Word, the merge-manager has a user-friendly interface to merge data from a FileMaker database and use the create a catolog feature. Is this too convoluted?
Any suggestions on the best route? any ideas? I don't think what I'm trying to do is all that unusual.
I've never written an applescript, but I have used them and I read about the language. I am generally a quick learner .... I just need to be pointed into the best plan of attack or know what the capabilities are.
Powerbook G4 Mac OS X (10.4.8) OfficeX and File Maker Pro
Powerbook G4 Mac OS X (10.4.8)

Hi Ettor,
Firstly, if the document is password protected, then I don't know if it could be done. Tatro's documents probably aren't. The first step is to unprotect the fill-in form document with ui scripting:
tell application "Microsoft Word" to activate
tell application "System Events"
tell process "Microsoft Word"
tell menu bar 1
tell menu "Tools"
delay 1
click menu item "Unprotect Document"
end tell
end tell
end tell
end tell
The document needs to be unprotected for macros to work. from there you can run a saved macro that sets the Save Preference, Save data only for forms. I named my recorded macro "ChangeFormPref". The macro could probably save the file also, but I wanted a simple macro. To run the macro, I found this on the Internet somewhere:
do Visual Basic "Application.Run \"ChangeFormPref\""
At this point, when you save the document, it's saved as text with AppleScript. Here's the entire script with no error checking:
set dp to (path to desktop as string)
set fs to (dp & "new.txt")
tell application "Microsoft Word" to activate
tell application "System Events"
tell process "Microsoft Word"
tell menu bar 1
tell menu "Tools"
delay 1
click menu item "Unprotect Document"
end tell
end tell
end tell
end tell
tell application "Microsoft Word"
activate
do Visual Basic "Application.Run \"ChangeFormPref\""
delay 1
save front document in fs
end tell
The delays may not be necessary, except for the one that waits for Word to activate. Here, I just placed the new.txt file on the desktop for testing.
Next, AppleScript could easily concatenate the files creating data for a database. I would probably use the new.txt file as a temporary file, read that file, concatenate to a main file, clear the temp file, rewrite to it with Word, etc.. It might be faster though to create all the files first with some naming convention.
I wasn't sure if Tatro was coming back, but am glad someone may use it.
Note that Tatro is using Word X.
Edited: I should give a warning that if you unprotect document and protect it again you lose the data. reprotecting seems to clear the form.
gl,

Defining the navigation frame: Cannot find the menu path in Customizing

DEFINING THE NAVIGATION FRAME
I do not find the path in this CRM 7.0 to change the navigation frame. The navigation frame for the header area is customized in the following path (in CRM 2007, I think)
SPRO -> IMG -> Customer Relationship Management -> Business Roles -> Define Navigation Frame
Here you select the navigation frame specified for your business role, the component ID for the logo area, and so on. when you have the navigation frame ready, you assign it to the business role, but I cannot find this path in CRM 7.0, so help would be needed. Regards, Martin.

Hello Martin,
The correct path is
SPRO->IMG->Customer Relationship Management->UI Framework->Define Navigation Bar Profile
Here you select your customized profile defined your Business role and configure it as per your requirement.
I hope this helps. Please let me know if you have more questions.
Thanks
Vishal

Create and Enable Find/Torch menu Button in Customized Form

Similar Messages

Maybe you are looking for