Create and export a still image form video?

How do I create and then export a still image from my video? Is it the same as freeze frame? It seems like that is different? I looked on youtube and a guy was telling how to do it, but he said to go up to share at the top and it is not there on my version. I think perhaps he was using an older version.. So to cut to the chase.. How do I create a still photo form my vdieo then export it to desktop or iphoto?

You seem to have added to "Save Current Frame" option to the destinations, but you are not using, if what you are outputting is a video file and not a still image file.
Now, click Next..., choose a file name and folder to save it on. That is just that.

Similar Messages

How to create and export a still frame from a movie in iMovie 09

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Are you working in iMovie and realize that certain frames in the movie would be perfect as photographs? Here is how to extract them...
*To get a still frame from an Event*, right-click on the frame and select "Add Still Frame to Project". The still will be added to the end of the current project. Right click on the still frame in the project and select "Reveal in Finder". You will see a jpeg file that is highlighted. Drag this jpeg file in the finder to the iPhoto icon on your dock.
*If you want a still from a project*, rather than an event, the process is similar, except you right-click on the frame and select "Add Freeze Frame", and it adds the freeze frame at the end of the clip rather than at the end of the project. Right-click/reveal in Finder, drag JPEG to iPhoto icon in dock.
*If you are not using iPhoto*, and just want to save to your desktop, click Reveal in Finder as above, then COPY, then PASTE to desktop.
Hint: If you do not want to clutter up your iMovie Project with stills at the end that you would have to go back and delete, then create a separate iMovie Project just for your stills, and follow the instructions for capturing stills from an Event.
Note: If you do not have a right mouse button, then control-click will work instead of right-click.
This is the 1st version of this tip. It was submitted on Dec 5, 2009 by AppleMan1958.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

First, click iMovie/About and see which version you have.
Versoon 9.0.2 would be iMovie 11.
Follow the instructions [in this post|http://discussions.apple.com/message.jspa?messageID=13065602#13065602]
If you have Version 8.0.6, that is iMovie 09 and you should see the Reveal In Finder option.

Re: How to create and export a still frame from a movie in iMovie 09

The tip above is ready to be posted.

First, click iMovie/About and see which version you have.
Versoon 9.0.2 would be iMovie 11.
Follow the instructions [in this post|http://discussions.apple.com/message.jspa?messageID=13065602#13065602]
If you have Version 8.0.6, that is iMovie 09 and you should see the Reveal In Finder option.

Create still images from video files?

from http://gadgetwise.blogs.nytimes.com/2009/04/16/5-new-photoshop-tips-for-photographers/ , "You can now preview video in Bridge and create still images from video files."
I just installed the 5.4 Camera Raw Update.
I can preview the AVI files from my Nikon D5000, but have not figured out how I might create a still image ( other than stopping the movie, and dragging to copy ) Have tried searching adobe, this forum, have not found more info ion this.

Stop the video at the desired point, press the Shift, Command, and 4 keys, drag the cursor so that the whole picture is highlighted, let go of the button, and open the PNG on the desktop.
(35300)

How can I export a still frame form a video in FCP X

Hi all - I cannot see how to export a still from a video using FCP X. The Share option doesn't seem to offer a dialogue such as in Tom Wolski's book page 370
Has it changed with 10.0.7
Cheersand thanks

[email protected] wrote:
… Has it changed with 10.0.7
it has.
Mark&Steve give some excellent (as usual) hints in their latest podcast:
http://youtu.be/RlgeJJyFdXo

How to create a sequence of stills from a video clip?

Hi,
I am doing a video project for college and I want to create a stop motion style scene. I took a continuous video of myself drawing bit by bit a picture on a chalkboard and stepping out of the shot after each piece was drawn, now i want to edit out all the parts with me in it. I figured the best way to do this would be to convert the video into a sequence of stills and then just delete the ones i dont need.
Can anyone advice me on how to convert the video into stills or if there is a better way to do it?
Many thanks
Cephei

I agree with Harm. However if you want to export a still image sequence then see Export still-image sequences in the PPro Help.
You will also find links to many free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie

Exporting many still images

The thread on exporting a still image reminds me to ask how you can export a whole series of stills. I often want to export a lot of stills from a film to use in graphics programmes but wonder if there is a way to do this without having to work my way through each individual clip. On a previous editing system I used to create a whole lot of one frame clips and then exported selection of them all and they appeared as tifs (or whatever). Does FCP have something similar. I have feeling that I once did something similare using batch export but cannot remember how even when I re read the help.
Pete Snowdon

I used to create a whole lot of one frame clips and then exported selection of them all and they appeared as tifs (or whatever). Does FCP have something similar<<</div>
Yes it does. Once you've assembled the frames you want to export, set an IN and OUT point, the go to File->Export->Using QuickTime Conversion. In the export window, choose "Image Sequence" and then choose the file format you want from the OPTIONS button. Make sure you create a folder for the files to go into.
-DH

Still Images into video.

I want to turn images into a video. I have Adobe Premiere Elements 10 and Photoshop Elements 10, can I do it with them? Thank you.

Curt
Please re-read and consider the Time Lapse Basics blog post details in the context of you creating many many separate still images of your object moving say from left to right (A to B to C to D). Often "hundreds of pictures" are used depending on the scope of the project - your object moving in time.
Each of those still images (representing A, B, C, and D) gets taken (in the A, B, C, D sequence) into a Premiere Elements where you decrease the duration of each still image (from 5 seconds to say 1 second) to get the object's motion effect of moving from A to D.
What format is your comic strip in now? Drawings on a piece of paper? If these are drawings on paper, then you will should take pictures of each of the drawings A, B, C, and D. It is those pictures (jpg, still images) that get taken in sequence into the video editor like Premiere Elements where you decrease the duration of each to achieve the animated effect.
Photoshop Elements Editor, check out the FIle Menu/Save for Web feature where you can create an animated gif. But, here again, if what you have now are drawings, then you will need to find a way to make photographs of them.
There are numerous ways described online for making your comic strip drawings into and animation (video).
Please review them with a Google search to get an overview of what is out there.
After that, we can go over step by step what next based on your starting material and Premiere Elements.
Thanks.
ATR

Creating a clip from still images

Hey Thrill seekers. In advance thank you for your kindness to a premier newbie.
I'm working on a personal project for my local Habitat for Humanity Chapter. I'm capturing single images a 5 second intervals and want to create a time lapse film of the build. I'm also taking stills and putting them over the background created by the time lapse. Each week I learn a little more, and see more possibilities.
Right now I'm taking the stills, batching them through photoshop to crop to 1920X1080, and creating 500 frame clips with Quicktime Pro (seems to be a number that won't choke my computer) then using the clips in Premier Elements.
What I'd LOVE to do would be to just import higher rez stills, (and I know I can tell premier to make the stills 1 frame by default) but then be able to treat the entire group of 4,500 or so frames as a sinlge entity so I could zoom in/out and pan on the time lapse image. As it is now, I don't know how to do so and am locked into a single size and crop on the "video" clips.
I realize this is a premier pro forum and I just admitted to using elements. But if an upgrade would give me the capability I'd do so. I've got the trial version of pro, but haven't found out how to do it there either.
Again, thanks for your help, and be gentle.

There are a couple considerations:
1.) PrPro can only take images up to ~4000 pixels on the largest dimension. One can do a lot of panning on zoomed out images, far smaller than that. High-rez images will only bog things down. I would plan on just how many extra pixels you need and set the larger ones to that. One caveat: if you want to Import as a Numbered Sequence, you will need to be aware of the numbering, and keep that consistent.
2.) You can use a Numbered Sequence:
To import numbered still-image files as one clip
Make sure that each still-image file name contains an equal number of digits at the end and has the correct file extension—for example, file000.bmp, file001.bmp, and so forth.
Choose File > Import.
Locate and select the first numbered file in the sequence, select Numbered Stills, and click Open. When Numbered Stills is selected, Adobe Premiere Pro interprets each of the numbered files as a single frame in a video clip.
Note: Changing the default duration of still images in the Preferences dialog box does not affect the duration of numbered stills imported into a video clip. Each still becomes one frame when imported in this way.
3.) If you are Importing as a Numbered Sequence, there might not be much time to Pan & Zoom. Plan that carefully.
4.) I keep my stills in .PSD format, and Import that. Now, I shoot RAW, and process to .PSD in PS, so it's an easy workflow to maintain.
5.) You are talking about a lot of stills. I have done Projects with just over 2000 .PSD's, but most were sized to my Project's Frame Size, with only some being larger to allow for the Panning on a Zoomed out image. I have a pretty stout workstation, and have had no issues, but you ARE talking an HD Project (many more pixels, than my SD Projects) and many more still images.
6.) For "Stop Motion," I find that 3 Frames is about right for most of my subjects. If you do not want a "Stop Motion" look, then choose the Default Still Duration that works best for your concept.
I do not believe that PrE has the Numbered Sequence feature, and also chokes on larger still images well before PrPro does. Personally, I'd never attempt a Project of this magnitude in PrE, but I only have PrE 4, so maybe PrE 8 has better capabilities. I just do not know.
Good luck, and there will probably be other thoughts that pop into my mind. You might also want to post to the PrE forum, and link back to this post too, so people can follow along, and not end up posting the same comments in two places.
Hunt
[Edit] Forgot to add that the Sequences feature, alone, would be a good reason to go with PrPro, in lieu of PrE for a Project of this size. You can use those like "mini-Projects" within a "master Project." I most often use them like others do "Chapters."
Message was edited by: Bill Hunt - Added [Edit]

Export to Still Image only exports PICT. PICT not supported in 64-bit

Quicktime Player Pro 7 only exports still images as Quicktime compressed images in a PICT container. However, neither Preview nor Photoshop CS5 read PICT files anymore. (There don't seem to be any 64-bit PICT handlers)
So I can export a still image out of a movie?

Quicktime Player Pro 7 only exports still images as Quicktime compressed images in a PICT container. However, neither Preview nor Photoshop CS5 read PICT files anymore. (There don't seem to be any 64-bit PICT handlers)... So I can export a still image out of a movie?
Yes. Either use Leopard OS for QT 7 Pro export as a PICT and Preview to covert to another format or use MPEG Streamclip (free) to export the frame directly to JPEG, TIFFF, and/or PNG formats under Snow Leopard OS.

PE2 hangs with Windows 7 when creating and exporting files

My computer running WinXP just broke down on me for the 2nd time in 7 years, so I finally decided to upgrade. I put it off because I was afraid of windows 7 having compatibility issues with my old software, and now I'm having trouble with Premiere Elements 2. After it opens up I can cancel and exit but if I try to create a file it stops responding. The tutorial opens up as if there's no problem and it plays on the timeline like normal. When I tried to export that sample video the computer hung for a long time before letting me change the output settings. The file rendered at a normal speed, and the exported video looks fine. Since then I've transferred my old files and have no problem working with them or importing new media to an existing file. It's just creating and exporting that causes problems. I'm using Windows 7 home premium, 64 bit.

Have you tried right-clicking the application icon and setting it to run in XP compatibility mode?
If not you could install a Virtual Machine to run using your existing XP Licence. Or upgrade your W7 to Professional/Ultimate that includes Virtual XP Mode.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Exporting JPEG still images in Final cut 5

Just wondering if anyone can tell me how to export a still image from final cut?
I used to have final cut 3 and it was as simple as file/export/quicktime...
but now it only gives me options for a quicktime movie...
Thanks...
Jeremy.

Instead of "export to quicktime" choose "export using qt conversion".
Then in options selects the type of still you want.
rh

Dynamically create and remove TEXT items in forms

Hi Guys,
Is there a way to dynamically create and remove TEXT items in form. For example I have the EMP and DEPT table and when
I select the EMP table name from the LOV, rows of the EMP table with column name and data should get displayed on the screen and likewise a similar action for DEPT table and
so on. I have about 90 tables from where data could be required to view and edit. They all have varying number of columns.
Any suggestions ?
Thanks
KMD
null

Use OLE concept of developer and map Excel as an object
Nadeem
null

How do I save a still image from video in imovie '11?

How do I save a still image from video in imovie '11?

See this User Tip by AppleMan1958 -
https://discussions.apple.com/docs/DOC-3231
John

QT X: Create and export still image?

Is there any way in QT X to grab a video frame and export it (full-size) as an image?
I think one could do this with QT 7 Pro (not sure). QT X allows one to trim, but the selection is limited to a duration and must be exported as a movie. I just want a still image from a video frame (and not including the Title Bar or the control bezel).
iMovie can do this, but even there it is awkward (many steps).
Skitch allows window grabs, but clicking on the QT window makes the bezel appear (and I have to run the movie at 100% in order to get an actual frame).
--Thanks.

Hi all,
On my main machine I still run Quicktime 7 Pro, even under 10.6, to do most of my movie and image conversions and dread when Apple remove what is one of the most critical basic tools.
Working on another machine I have come across this thread because it only has Quicktime 10 on it.
A solution to getting a single (controlled!) frame from a movie, depending on your screen resolution, is to use Quicktime 10's trim function to trim the movie to just the frame you want and then turn on looped playback in the View menu before pressing the play button. Then you can use Grab to take a picture of your screen without the controls in the way.
But come on Apple, exporting single frames (and the soundtracks) from a movie is a basic 20 year old function - please bring them both back.

Create and export a still image form video?

Similar Messages

Maybe you are looking for