Create and use a Wi-Fi network?

Is it possible for my Macbook to do both at the same time?

cnriaczoy3,
No, you can only use one or the other. What you can do is join a wireless network via Airport (which is just standard 802.11x), and share that connection over any other network interface: ethernet, Bluetooth, Firewire, etc.
Or, you can go the other way: connect the Macbook to a network using Bluetooth, ethernet or Firewire, then share via Airport.
Scott

Similar Messages

How to create and use templete or standard network / activity and wbs

dear
i have define the structure for my project which have WBS elements, network and activties. the strucutre is same for all the projects that i define.
i wanna know whether to use templete or standard wbs network and activities as templete for the project.
for a network there are almost 150 activties across 10 wbs elements i want this structure as a templete what can i do create it.
Further, how can i use LSMW to create relationship for ativities?
regards
saqib usman

I have create std wbs level 1 5 wbs further i create std nwrk and activities and assignMENT are as follows
h1.*Create std wbs from CJ91 *
STD DEFINITION IS
E00-BSS-CO-BTS-0000              STANDARD BTS
LEVEL 1 WBS ELEMENTS
E00.BSS.CO.BTS.0000.RFP     RADIO FREQUENCY PLANNING
E00.BSS.CO.BTS.0000.SA     SITE ACQUISITION
E00.BSS.CO.BTS.0000.TXN     TRANSMISSION
E00.BSS.CO.BTS.0000.CW     CIVIL WORKS
E00.BSS.CO.BTS.0000.PMO     PMO
RELEASE THE STD PROJECT OPTIONAL BY EDIT > STATUS > RELEASE
h1.CREATE STD NETWORK FORM "CN01" tcode
NEWORK HEADER WITH FOLLOWING SETTING
9000000    STD NETWORK CORPORATE BTS 0001
Network usage     UNIVERSAL
Planner group   1      1
Network status     RELEASE (GENERAL)
Std.WBS element     E00.BSS.CO.BTS.0000.BSS
Predefined plnt      CO01
press activity overview button or (shiFt+F7)
I ASSIGN ACTIVITY TO STD WBS ELEMENTS
ACTIVITY    OPR. SHORT DESC STD WBS ELEMENT
A01            ZERO VERIFICATION   E00.BSS.CO.BTS.0000.RFP
A02            DESIGN DOCUMENT   E00.BSS.CO.BTS.0000.RFP
B01            SITE SURVEY 1          E00.BSS.CO.BTS.0000.SA
B02            SITE SURVEY 2          E00.BSS.CO.BTS.0000.SA
C01            CIR Doc Input              E00.BSS.CO.BTS.0000.CW
C02            CIR CW Input by RM    E00.BSS.CO.BTS.0000.CW
D01            CIR Doc Input              E00.BSS.CO.BTS.0000.TXN
D02            CIR TXN Input by RM    E00.BSS.CO.BTS.0000.TXN
E01            Rollout Month               E00.BSS.CO.BTS.0000.PMO
E02            ON Air Date                 E00.BSS.CO.BTS.0000.PMO
h1.PREREQUISITE FOR ASSIGNMENT OF STD NETWORK and WBS are:
PROCESS TRANSACTION "CJ20N" TO INCLUDE STD NETWORK ALONG WITH ASSIGNED ACTIVITIES AND STD WBS.
FURTHER, I WANT TO COPY STD NTWORK SEVERAL TIMES with different network number. EACH TIME I COPY STD NWK TO OPERATIVE STRUCTURE THE SYSTEM SHOULD PROMPT NEW NUMBER FOR NETWORK AND ALSO PROMPT TO ENER ASSIGNED STD WBS ELEMENTS WITH REPLACE OPTION for operative WBS NUMBER.
STANDARD WBS                                               OPERATIVE WBS
E00.BSS.CO.BTS.0000.RFP     REPLACE BY     E00.BSS.CO.BTS.0003.RFP
E00.BSS.CO.BTS.0000.SA     REPLACE BY     E00.BSS.CO.BTS.0003.SA
E00.BSS.CO.BTS.0000.TXN     REPLACE BY     E00.BSS.CO.BTS.0003.TXN
E00.BSS.CO.BTS.0000.CW     REPLACE BY     E00.BSS.CO.BTS.0003.CW
E00.BSS.CO.BTS.0000.PMO     REPLACE BY     E00.BSS.CO.BTS.0003.PMO
IN MY OPERATIVE STRUCTURE
I HAVE TWO LEVEL FOR WBS I.E.:
E00.C0.BSS            LEVEL 1
     E00.BSS.CO.BTS.0001    LEVEL 2    ASSIGNED NWK 0001 WITH ACTIVITIES AND WBS
     E00.BSS.CO.BTS.0002    LEVEL 2    ASSIGNED NWK 0001 WITH ACTIVITIES AND WBS
     E00.BSS.CO.BTS.0003    LEVEL 2    WHERE I WANT TO ASSIGN STD NWK AND WBS
                                                              (I HAVE CREATED EXTERNAL NUMBER FOR NETWORK)
I GO TO THE TEMPLETE AREA AND CLICK ON STD NETWORK BUTTON AND DRAG STD NETWORK 09000001-1 TO E00.BSS.CO.BTS.0003. ENTER NAME FOR NETWORK "BTS 0003". SYSTEM PROMPT TO ENTER EXTERNAL NETWORK NUMBER I.E.
Enter network number
WBS elem:E00.BSS.CO.BTS.0003
Copy from network:
E00-BTS-0003
h1.CLICK CONTINUE BUTTON NOW REAL PROBLUM COMES A DIALOG BOX APPEARS
Include standard network
You want to include a standard network that has assignments to standard WBS elements. However, the selected WBS element does not correspond to the standard WBS element.
               Copy Assignment                            Ignore Assignment
In case, if i select button Copy assignment or select Ignore Assignment then:
New network created E00-BTS-0003 under WBS     E00.BSS.CO.BTS.0003 with all assigned activitites but no WBS elements i.e.
STANDARD WBS                                               OPERATIVE WBS
E00.BSS.CO.BTS.0000.RFP     REPLACE BY     E00.BSS.CO.BTS.0003.RFP
E00.BSS.CO.BTS.0000.SA     REPLACE BY     E00.BSS.CO.BTS.0003.SA
E00.BSS.CO.BTS.0000.TXN     REPLACE BY     E00.BSS.CO.BTS.0003.TXN
E00.BSS.CO.BTS.0000.CW     REPLACE BY     E00.BSS.CO.BTS.0003.CW
E00.BSS.CO.BTS.0000.PMO     REPLACE BY     E00.BSS.CO.BTS.0003.PMO
After all my finding i am not able to bring activity assigned WBS elements. Kindly help and provide information to resolve the problum.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

How to create and use mutable array of UInt8

Hello!
If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
Then how to create and use mutable array of UInt8 pointers?
The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

I try
- (void) scheduleRequest:(UInt8 *)request {
if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
[scheduledRequests addObject:request];
But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

HOW TO CREATE and USE EVENTS IN WORKFLOWS .

HOW TO CREATE and USE EVENTS IN WORKFLOWS with the help of classes.
What i am doing is..
open se24
event tab->event name->parameters
method tab->method name->event handler->copy parameters
interface tab->if_workflow->enter
tell me what else to do step by step
Another important thing is that HOW to use these class events to trigger the workflows.
REPLY ASAP
THXS IN ADVANCE

Hi,
Pl. see this blog...
Raising ABAP OO events for workflow
Regards,
JOy.

How to Create and use of Coherence servers in weblogic serevr 11g (10.3.6)?

how to Create and use of Coherence servers in weblogic serevr 11g (10.3.6)?

See the below discussion
How to create and use Webservice controls using WSDL in weblogic portal10.3
Thanks,
Venkat Sarvabatla

How to create and use dynamic queue in JMS

Plz tell me how to create and use a dynamic queue in jms and can reciever file lookup it as it lookup any server configurred queue(written in the server).

Hi,
We can use Azure File services to do this, for more information, please have a look at this article:
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
VMs using standard and familiar file system APIs like ReadFile and WriteFile.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can I create and use more than one repository on OVM 2.1.5

The version of Oracle VM I am using is 2.1.5 .
I wonder can I create and use more than one repository on OVM 2.1.5. Because I want to install different GOS on different disks.
I know in Oracle VM 2.2 we can use following commands to realize that.
a. #/opt/ovs-agent-2.3/utils/repos.py –n /dev/mapper/mpathxp1
b. #/opt/ovs-agent-2.3/utils/repos.py –r UUID
c. #/opt/ovs-agent-2.3/utils/repos.py –i
And other repositories can also be mounted and found under /var/ovs/mount/UUID.
But in Oracle VM 2.1.5, seems just one repository can be created and mounted. For example:
At first, I create a repository using mpath1p1:
a. # mkfs.ocfs2 /dev/mapper/mpath1p1
b. #/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath1p1 C "cluster root"
c. I can find the repository has been mounted under /OVS.
But if I want to use "/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath2p1 C "cluster root" to create another repository, and check the mount status using command "mount", these two disks are all have been mounted under /OVS.
"# cat /etc/ovs/repositories", only mpath1p1 with UUID was recorded there.
After reboot, only repository with mpath1p1 was mounted under OVS.
Can anyone tell me how to use more than one repositories on OVM 2.1.5. Do I have to install all the GOSs on the same disk and repository.
Thank you very much.

Now I've known how to create different repository. They will be mounted under /OVS/UUID. Thanks.

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

One structure is created and using in 3 queries, i want to modify that stru

hi gurus,
one structure is created and using in 3 queries, i want to modify that structure in only one query but it will not effect other two.wat should i do for that?
thanx in advace,
i will assign points,
srinivas.

Hi srinivas,
This scenario could be frequently seen in a project. I assume the structure you mentioned is saved as a global structure, then in the query which you want to modify, right click on the structure and choose "Remove Reference". This function copies the global structure to a local one, in which you can change it and the other two won't get affected.
Hope this helps.
Regards,
Aaron

SQL08 Need example of creating AND using a Fact (degenerate) dimension

Can someone post a link to some examples of setting up and using a Fact (degenerate) dimension. Ive got the SSAS 2008R2 Adventureworks DW project setup and I see a few Fact dimensions in there, but id like some descriptions to go along with this or
something similar.
My scenario:
Orders - attributes include : Order#, OrderStartDate, SalesPerson, BusinessType, MarketType
OrderTransactions - attributes include: OrderKey , TransactionAmount, TransactionType, TransactionDate, AccountKey
Description:
Its more or less the typical Order > Order Detail type scenario, with the addition of Orders have some additional attributes.
So I want to be able to measure on for example:
Order counts - broken down by BusinessType and MarketType , and then within a date range
Revenue - which will be totals of transaction amounts, again grouped by BusinessType and MarketType, but also be able to drill down to see the related Order#

Hi Shiftbit,
According to your description, you need some examples about create and use degenerate dimensions, right?
Degenerate dimensions, also called fact dimensions, are standard dimensions that are constructed from attribute columns in fact tables instead of from attribute columns in dimension tables. Here is document that describes how to create and use degenerate
dimensions step by step, please refer to the links below.
https://msdn.microsoft.com/en-us/library/ms167409(v=sql.100).aspx
http://www.jamesserra.com/archive/2011/11/degenerate-dimensions/
Regards,
Charlie Liao
TechNet Community Support

How do I create and use a watermark in aperture?

Hello there!
How to I create and use a watermark in aperture? do I need to download a 3rd party plugin? Any recommendations?
Thank you!

Aperture does not support the creation of watermarks; if you want a watermark image with transparent regions you need an application that can handle alpha channels - Prewiew, Photoshop, Pixelmator, Gimp, just to name a few.
But once you have a watermark image, you can add it to an image, when you export from Aperture. Add the watermark to one of the Export Presets. You will need to create your watermark in different sizes, so you can add it to each of the export pixel sizes for your images, that you are using.
Another possibility would be using the BorderFX plugin. This versatile plug-in also supports to add graphic overlays to your images, either when exporting or as an Edit plug-in. http://www.iborderfx.com/BorderFX

How do I create and use a ringtone without syncing and without jailbreaking?

How do I create and use a ringtone without syncing and without jailbreaking?

You create ringtones on your computer and sync them to your iphone.
You can buy ringtones from the ringtones section (at the bottom of the screen when you open itunes) of the itunes app on your iphone.
There may be apps that will do this - not sure.

Data Modeller: how to create and use collection type

Hello,
basically subj. I'm not clear how to ( for example ) create and use the data type based off the varray data type.
Please advise.
thank you
andrew

Hi Andrew,
you can create collection types (varray/table) in two ways:
1) in browser - find "Data Types">"Collection types" node use pop-up menu - it's just "create new collection type" there
2) in Data types model diagram - you can create collection of "certain structured type" or collection of references to it - use "new Collection ..." tool and first click on referred structured type and after that on structured type that will hold the collection - new attribute is added in latter type and if there is no such collection type already defined new collection type is created and you can edit it later.
Philip

Create and use a Wi-Fi network?

Similar Messages

Maybe you are looking for