Create and use templates

Hi, experts,
    When i created a document from a template,why i can't find the template( which i have created and activated in the system configuration) in the selection?
Thanks!

Hi sandy,
follow these steps
Check and Configure the
Template Service
Task:
Check the template service is activated and define the location of templates and
template groups.
1. Log on as EP300.A-## to check that the template service is running and
define the location of the template groups and templates.
a) In the top level navigation, choose System Administration → System
Configuration and navigate to Knowledge Management → Content
Management → Global Services → Template Service. If Template
Service is invisible in Global Services, choose Mode → Advanced.
b) Ensure that in Template Service, the Active box is checked. Note
the paths for the template groups and templates. The default path
is/documents/Templates.
c) Choose Show Advanced Options if the Active box is missing.
2. Create the folders that have been defined in the configuration for templates
and template groups.
a) Choose Content Administration → KM Content → documents.
b) Choose Folder → New → Folder.
c) Enter the name Templates and choose Save.
d) Open this folder and create a new folder for the templates. The folder
must have the same name as that defined in the configuration, so use
SingleTemplates.
e) Create now a folder for the template groups in folder Templates. The
folder name must be the name defined in the configuration, so use
TemplateGroups.
Create and Use Single
Templates
Task:
Upload documents that will be used as templates. Activate these templates for a
specific folder and create new documents based on these templates.
1. Upload the documents Exercise.doc, Solution.doc, and Unit.ppt from
\Courses\EP300 62\Exercises\Template Service on the training share to the
folder SingleTemplates.
a) Choose Content Administration → KM Content and navigate
todocuments/Templates/SingleTemplates.
b) In the SingleTemplates folder, choose Folder → New → Upload.
c) Choose Browse to locate the file in \Courses\EP300
62\Exercises\Template Service, for example, Exercise.doc, and choose
Open.
d) Choose Upload and repeat these steps for the other documents.
e) When all the templates have been uploaded, choose Done.
2. Activate the templates Exercise.doc, Solution.doc, and Unit.ppt for the
documents## folder.
a) Locate the documents## folder. Navigate to the folder by choosing
Content Administration → KM Content and select documents/Public
Documents/documents##.
b) Click on the context menu for documents## and choose Details →
Settings → Templates.
c) Select all the templates (select the checkboxes) and choose Save and
then Close.
3. Create new documents in the documents## folder based on these templates.
a) Within the documents## folder, choose Folder → New → From
Template and choose a template. Because the templates have been
activated only in this folder, the template selection is also only available
for this folder.
b) Enter a name and choose Save.
award me points if it helpful

Similar Messages

  • I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

    I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
    I have tried back ups and  restoring, resetting, and even updating the pages app. And nothing has worked.

    I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
    I have tried back ups and  restoring, resetting, and even updating the pages app. And nothing has worked.

  • How to create and use mutable array of UInt8

    Hello!
    If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
    Then how to create and use mutable array of UInt8 pointers?
    The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

    I try
    - (void) scheduleRequest:(UInt8 *)request {
    if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
    [scheduledRequests addObject:request];
    But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

  • HOW TO CREATE  and  USE EVENTS IN WORKFLOWS .

    HOW TO CREATE  and  USE EVENTS IN WORKFLOWS with the help of classes.
    What i am doing is..
    open se24
    event tab->event name->parameters
    method tab->method name->event handler->copy parameters
    interface tab->if_workflow->enter
    tell me what else to do step by step
    Another important thing is that HOW to use these class events to trigger the workflows.
    REPLY ASAP
    THXS IN ADVANCE

    Hi,
    Pl. see this blog...
    Raising ABAP OO events for workflow
    Regards,
    JOy.

  • How to Create  and use of Coherence servers in weblogic serevr 11g (10.3.6)?

    how to Create  and use of Coherence servers in weblogic serevr 11g (10.3.6)?

    See the below discussion
    How to create and use Webservice controls using WSDL in weblogic portal10.3
    Thanks,
    Venkat Sarvabatla

  • How to create and use dynamic queue in JMS

    Plz tell me how to create and use a dynamic queue in jms and can reciever file lookup it as it lookup any server configurred queue(written in the server).

    Hi,
    We can use Azure File services to do this, for more information, please have a look at this article:
    http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
    VMs using standard and familiar file system APIs like ReadFile and WriteFile.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can I create and use more than one repository on OVM 2.1.5

    The version of Oracle VM I am using is 2.1.5 .
    I wonder can I create and use more than one repository on OVM 2.1.5. Because I want to install different GOS on different disks.
    I know in Oracle VM 2.2 we can use following commands to realize that.
    a. #/opt/ovs-agent-2.3/utils/repos.py –n /dev/mapper/mpathxp1
    b. #/opt/ovs-agent-2.3/utils/repos.py –r UUID
    c. #/opt/ovs-agent-2.3/utils/repos.py –i
    And other repositories can also be mounted and found under /var/ovs/mount/UUID.
    But in Oracle VM 2.1.5, seems just one repository can be created and mounted. For example:
    At first, I create a repository using mpath1p1:
    a. # mkfs.ocfs2 /dev/mapper/mpath1p1
    b. #/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath1p1 C "cluster root"
    c. I can find the repository has been mounted under /OVS.
    But if I want to use "/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath2p1 C "cluster root" to create another repository, and check the mount status using command "mount", these two disks are all have been mounted under /OVS.
    "# cat /etc/ovs/repositories", only mpath1p1 with UUID was recorded there.
    After reboot, only repository with mpath1p1 was mounted under OVS.
    Can anyone tell me how to use more than one repositories on OVM 2.1.5. Do I have to install all the GOSs on the same disk and repository.
    Thank you very much.

    Now I've known how to create different repository. They will be mounted under /OVS/UUID. Thanks.

  • Re: How do you create and use "common" type classes?

    Hi,
    You have 2 potential solutions in your case :
    1- Sub-class TextNullable class of Framework and add your methods in the
    sub-class.
    This is the way Domain class work. Only Nullable classes are sub-classable.
    This is usefull for Data Dictionary.
    The code will be located in any partition that uses or references the supplier
    plan.
    2- Put your add on code on a specific class and instanciate it in your user
    classes (client or server).
    You could also use interface for a better conception if needed. The code will
    also be in any partition that uses or references the supplier plan where your
    add on class is located.
    If you don't want that code to be on each partition, you could use libraries :
    configure as library the utility plan where is your add-on class.
    You can find an example of the second case (using a QuickSort class,
    GenericArray add-on) with the "QuickSort & List" sample on my personal site
    http://perso.club-internet.fr/dnguyen/
    Hope this helps,
    Daniel Nguyen
    Freelance Forte Consultant
    http://perso.club-internet.fr/dnguyen/
    Robinson, Richard a écrit:
    I'm relatively new to forte and I'd like to know how can you handle utility
    type classes that you want to use through out your application? Ideally
    what I want is a static class with static methods.
    Let's say that I have a StringUtil class that has a bunch of methods for
    manipulating strings.
    My problem is that we have code that runs on the client and code that runs
    on the server. Both areas could use the StringUtil class, but from what I
    understand, I have to create StringUtil in a plan and then create a server
    object of type StringUtil. The server object will eventually get assigned
    to a partition. That's not good since I really want the server object to
    physically reside at the server end and at the client end. (Actually, I
    don't want a server object, I just want to invoke a static method of a
    static class).
    Any clues on how to solve this problem would be appreciated.
    Also, what is the url at Sage-it that has a summary of all emails that have
    been posted to [email protected]? Perhaps this question has been
    answered previously.
    Thanks in advance
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi Richard,
    Your question about "utility classes" brings up a number of issues, all of
    which are important to long-term success with Forte.
    There is no such thing as a static method (method that is associated with a
    class but without an implicit object reference - this/self/me "pointer") in
    TOOL, nor is there such thing as a global method (method not associated
    with a class at all). This is in contrast to C++, which has both, and
    Java, which has static methods, but not global classes. Frequently, Forte
    developers will write code like this:
    result, num : double;
    // get initial value for num....
    tmpDoubleData : DoubleData = new;
    tmpDoubleData.DoubleValue = num;
    result = tmpDoubleData.Sqrt().DoubleValue;
    tmpDoubleData = NIL; // send a hint to the garbage collector
    in places where a C++ programmer would write:
    double result, num;
    // get initial value for num....
    result = Math::Sqrt(num);
    or a Java programmer would write:
    double result, num;
    // get initial value for num....
    result = Math.sqrt(num);
    The result of this is that you end up allocating an extra object now and
    then. In practice, this is not a big deal memory-wise. If you have a
    server that is getting a lot of hits, or if you are doing some intense
    processing, then you could pre-allocate and reuse the data object. Note
    that optimization has its own issues, so you should start by allocating
    only when you need the object.
    If you are looking for a StringUtil class, then you will want to use an
    instance of TextData or TextNullable. If you are looking to add methods,
    you could subclass from TextNullable, and add methods. Note that you will
    still have to instantiate an object and call methods on that object.
    The next issue you raise is where the object resides. As long as you do
    not have an anchored object, you will always have a copy of an object on a
    partition. If you do not pass the object in a call to another partition,
    the object never leaves. If you pass the object to another partition, then
    the other partition will have its own copy of the object. This means that
    the client and the server will have their own copies, which is the effect
    you are looking for.
    Some developers new to Forte will try to get around the lack of global
    methods in TOOL by creating a user-visible service object and then calling
    methods on it. If you have a general utility, like string handling, this
    is a bad idea, since a service object can reside only on a single
    partition.
    Summary:
    * You may find everything you want in TextData.
    * Unless you anchor the object, the instance will reside where you
    intuitively expect it.
    * To patch over the lack of static methods in TOOL, simply allocate an
    instance when required.
    Feel free to email me if you have more questions on this.
    At the bottom of each message that goes through the mailing list server,
    the address for the list archive is printed:
    http://pinehurst.sageit.com/listarchive/.
    Good Luck,
    CSB
    -----Original Message-----
    From: Robinson, Richard
    Sent: Tuesday, March 02, 1999 5:44 PM
    To: '[email protected]'
    Subject: How do you create and use "common" type classes?
    I'm relatively new to forte and I'd like to know how can you handle utility
    type classes that you want to use through out your application? Ideally
    what I want is a static class with static methods.
    Let's say that I have a StringUtil class that has a bunch of methods for
    manipulating strings.
    My problem is that we have code that runs on the client and code that runs
    on the server. Both areas could use the StringUtil class, but from what I
    understand, I have to create StringUtil in a plan and then create a server
    object of type StringUtil. The server object will eventually get assigned
    to a partition. That's not good since I really want the server object to
    physically reside at the server end and at the client end. (Actually, I
    don't want a server object, I just want to invoke a static method of a
    static class).
    Any clues on how to solve this problem would be appreciated.
    Also, what is the url at Sage-it that has a summary of all emails that have
    been posted to [email protected]? Perhaps this question has been
    answered previously.
    Thanks in advance

  • One structure is created and using in 3 queries, i want to modify that stru

    hi gurus,
    one structure is created and using in 3 queries, i want to modify that structure in only one query but it will not effect other two.wat should i do for that?
    thanx in advace,
    i will assign points,
    srinivas.

    Hi srinivas,
       This scenario could be frequently seen in a project. I assume the structure you mentioned is saved as a global structure, then in the query which you want to modify, right click on the structure and choose "Remove Reference". This function copies the global structure to a local one, in which you can change it and the other two won't get affected.
       Hope this helps.
    Regards,
    Aaron

  • SQL08 Need example of creating AND using a Fact (degenerate) dimension

    Can someone post a link to some examples of setting up and using a Fact (degenerate) dimension.  Ive got the SSAS 2008R2 Adventureworks DW project setup and I see a few Fact dimensions in there, but id like some descriptions to go along with this or
    something similar.
    My scenario:
    Orders - attributes include :  Order#, OrderStartDate, SalesPerson, BusinessType, MarketType
    OrderTransactions - attributes include:  OrderKey , TransactionAmount, TransactionType, TransactionDate, AccountKey
    Description:
    Its more or less the typical Order > Order Detail type scenario, with the addition of Orders have some additional attributes.
    So I want to be able to measure on for example:
    Order counts - broken down by BusinessType and MarketType , and then within a date range
    Revenue - which will be totals of transaction amounts, again grouped by BusinessType and MarketType, but also be able to drill down to see the related Order#

    Hi Shiftbit,
    According to your description, you need some examples about create and use degenerate dimensions, right?
    Degenerate dimensions, also called fact dimensions, are standard dimensions that are constructed from attribute columns in fact tables instead of from attribute columns in dimension tables. Here is document that describes how to create and use degenerate
    dimensions step by step, please refer to the links below.
    https://msdn.microsoft.com/en-us/library/ms167409(v=sql.100).aspx
    http://www.jamesserra.com/archive/2011/11/degenerate-dimensions/
    Regards,
    Charlie Liao
    TechNet Community Support

  • How do we create and publish templates in SRM ?

    Good day guru's
    How do  we create and publish templates in SRM , for contracts management ?
    Your help will be appreciated

    Hi,
    What is your SRM version?
    There are 3 buttons (Create, Create template, Create from Template) in the Process Contract screen, bbp_ctr_main in SRM50 (SRM_SERVER 550).
    Regards,
    Masa

  • How do I create and use a watermark in aperture?

    Hello there!
    How to I create and use a watermark in aperture? do I need to download a 3rd party plugin? Any recommendations?
    Thank you!

    Aperture does not support the creation of watermarks; if you want a watermark image with transparent regions you need an application that can handle alpha channels - Prewiew, Photoshop, Pixelmator, Gimp, just to name a few.
    But once you have a watermark image, you can add it to an image, when you export from Aperture. Add the watermark to one of the Export Presets. You will need to create your watermark in different sizes, so you can add it to each of the export pixel sizes for your images, that you are using.
    Another possibility would be using the BorderFX plugin. This versatile plug-in also supports to add graphic overlays to your images, either when exporting or as an Edit plug-in.  http://www.iborderfx.com/BorderFX

  • How do I create and use a ringtone without syncing and without jailbreaking?

    How do I create and use a ringtone without syncing and without jailbreaking?

    You create ringtones on your computer and sync them to your iphone.
    You can buy ringtones from the ringtones section (at the bottom of the screen when you open itunes) of the itunes app on your iphone.
    There may be apps that will do this - not sure.

  • Data Modeller: how to create and use collection type

    Hello,
    basically subj. I'm not clear how to ( for example ) create and use the data type based off the varray data type.
    Please advise.
    thank you
    andrew

    Hi Andrew,
    you can create collection types (varray/table) in two ways:
    1) in browser - find "Data Types">"Collection types" node use pop-up menu - it's just "create new collection type" there
    2) in Data types model diagram - you can create collection of "certain structured type" or collection of references to it - use "new Collection ..." tool and first click on referred structured type and after that on structured type that will hold the collection - new attribute is added in latter type and if there is no such collection type already defined new collection type is created and you can edit it later.
    Philip

  • I received an email from an acquaintance with her handwritten personal  signature at the bottom. Is thereafter way for me to create and use such signatures at the end of my emails from apple products?

    I received an email from an acquaintance with her handwritten personal  signature at the bottom. Is thereafter way for me to create and use such signatures at the end of my emails from apple products?

    Settings > Mail > Signature

Maybe you are looking for