Create Application in VC

Hi Friends,
I want to create an application to retrieve customer data by use of a webservice and display it on the screen.
But it has to be done over the Internet, I mean.
A customer logs in from outside into my system, comes to an input form, enters data, push the button, gets the result on the screen and can change and save the data.
Is this possible with VC or is it better to use something different?
Please give me the raw steps, if possible.
I know I can do it, but I'm not sure, can I do it over the Internet and second, the screen of the VC looks not very good.
Thanks in advance for your help.
RG. Jimbob

I think you will need to have an external facing area of your portal (something your netweaver administrator may know how to do) You can design a rfc that calls a BAPI or custom code the output fields yourself. You should then create a webservice for this RFC and use anonymous logon. You can then define a webservice system in VC pointing at this RFC.
I have never done it before but that is how I imagine it would work... Someone else may have a better answer.

Similar Messages

Need assistance creating applications with superseedence to uninstall Office 2010, Lync 2010 and then install Office 365 click to run 2013

We are getting ready in a few months to uninstall our locally installed Office 2010 and head to the cloud with Office 365 2013. I have created applications to uninstall Office 2010 and Lync 2010 and then added them to the supersedence tab for Office 365
office 2013 click to run with appv5.
When deploying the office 365 2013 application it does not uninstall office 2010 or lync 2010 with the supersedence. I am able to manually uninstall Office 2010 and Lync 2010 with the command lines I am using in the applications.
The application uninstall for Office 2010 is:
The application uninstall is an exe so I created an application, created a deployment type with the location of our Office 2010 admin point, installation program and uninstall program are set with the same line as I have tried to deploy it separately and
also as a supersedence in the Office 365 application setup.exe /uninstall ProPlus /config "\\sccmserver\share\Office2010\ProPlus.ww\silentuninstallconfig.xml. The silentuninstallconfig.xml was created from the original config.xml file and edited
to these settings:<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="NO" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="Reboot" Value="Never" />
<Setting Id="SETUP_REBOOT" Value="NEVER" />
<OptionState Id="ProductFiles" State="Local" Children="force" />
</Configuration>
The detection method is the folder path to see that office 14 exists. When I deploy this the machines finish with success showing this exists, but does not uninstall Office 2010.
running the command line manually mapped to this location on a machine uninstalls office 2010 without issue.
Lync 2010 uninstall:
Lync is an exe so I am using the LyncSetup.exe /silent /uninstall. The application is in the supersedence tab for Office 365 2013. This never installs. If I create a softare distribution and deploy it on its own it uninstalls without issue.
We are going to use Lync 2013 with our office 365 2013 installation so we need to uninstall this. The detection method for lync is file system folder and the Microsoft lync folder for detection.
MS Office 15 (Office 365) was created with the click to run tool. I can install this with the application I created using the appv5 package created with the click to run tool. The issue is we need Office 2010 and Lync 2010 uninstalled first.
Having both versions of Office installed in test has caused issues where Office 15 365 will not list in add and remove programs and cannot be uninstalled even with the fix it article to remove office 2013.
I have looked at many articles and so far it is not working for us. Any help appreciated to get us to the cloud.
Thanks,
Brit

The applications I have for uninstall of office 2010 and Lync 2010 for some reason do not uninstall. Manually testing the command lines they do. The detection method seems to be hanging things up. On the lync uninstall detection method I have
the setting type of file system, type folder, path c:\program files\ folder name Microsoft Lync.
I highly recommend using something other than a file/folder "exists" detection method. Installers are constantly leaving things behind due to environmental inconsistencies. It may leave files/folders behind with a schedule to delete files on next reboot.
These things are unpredictable and very hard to use. I just use the "HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall" Registry location. There you can actually key off the "Product Version" DWORD as well which gives you an even more accurate method
to determine if the application you are trying to deploy (or expect to exist) is truly there. This, of course, being if you are not using an MSI. If you have MSI technology ALWAYS use the product code unless the person writing the MSI chooses to use the same
product code for every version release of their product. In which case, Use the registry method.
As far as getting the supersedence and everything working. You need to start from the basics. Create Applications for all of the apps you want to remove. Make sure they install and uninstall properly (seems like overkill but it isn't that hard). Once you
have working install/uninstall applications then you can easily apply supersedence to your new applications with a setting of Uninstall on the superseded apps you should have no problem getting rid of them. I have done this for numerous things.
For example, I did this with Cisco Jabber to replace older versions of jabber, older versions of cisco unified personal communicator and lync and OSC. All of these replaced versions had to have an Application but once it was in it took two seconds to apply
all the supersedence rules and now I know when I push that software out no matter version is running on any machine it will pull all the old apps off and put the new one on.
Dustin Estes - MCP | www.dustinestes.com

Unable to create application server connection in Jdeveloper 10.1.3.3

Hi All,
I am using Jdeveloper 10.1.3.3. As my soa environement is clustered and we have 2 nodes on server.
While create application server connection jeveloper is giving error as : **Bad OPMN server host address*. I am able to accesss application using mozila or internet explorer. Will it provide different host name while soa is installed in clustered environment. Please help me in this.
Regards,
Adhi

Hi ,
Are you behind a proxy in Firefox or IE?
If so try to give the same proxy and the proxy avoidance IP's in JDeveloper proxy configuration.
If server couldnot be communicated from Jdev then this will be the first place i will look into .
Thanks,
Praveen

Error while creating application

Hi,
I am getting the following error while creating the application.
"IHspAppAssistantACM_SaveAppAssistant() Error
Unable to Create application FirstApp.
Error Number: 2147024891"
No other application is existing with this name.
I checked the HspEventLog... the following listed in it:
Information*16*ns36225*01/09/08 11:53:17*CHspDataSourceImp.cpp*Line 378*Entering CreateApplication: FirstApp*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3255*Could not retrieve planning version*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3326*Could not retrieve product release*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3397*Could not retrieve product CSS Version*
Error*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 217*Version & Release not found*
Information*16*ns36225*01/09/08 11:53:19*CHspDataSourceImp.cpp*Line 394*CreateApplication: Deleting old schema*
Information*16*ns36225*01/09/08 11:53:20*CHspDataSourceImp.cpp*Line 408*CreateApplication: Recreating security tables*
Information*16*ns36225*01/09/08 11:53:20*CHspDataSourceImp.cpp*Line 437*CreateApplication: Creating Essbase application*
Information*16*ns36225*01/09/08 11:53:31*CHspDataSourceImp.cpp*Line 495*CreateApplication: Creating new schema*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 574*CreateApplication: Initializing schema*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 642*CreateApplication: Creating plantypes*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 754*CreateApplication: Creating application owner user*
I am using the following credentilas:
Essbase Server login : admin
SQl Server login: admin
Windows NT login: ns36225
We are using Planning 9.2 version and Planning Desktop for creating the applications.
please help me.
Thanks in advance.
null

Hi,
I had set up CSS Properties file and as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <css>
- <hub location="http://hic-pcs27303:58080">
<dirPort>58089</dirPort>
</hub>
- <spi>
- <provider>
<native name="Native Directory" />
</provider>
</spi>
- <searchOrder>
<el>Native Directory</el>
</searchOrder>
- <token>
<timeout>480</timeout>
</token>
- <logger>
<priority>WARN</priority>
</logger>
</css>
I got the problem. it is with DCOM account. I am adding a user in my LAN network, after clicking apply it taking the user in System account not in the domain account. e.g: I logged into my Sys(no: hst-pcs5424) with ABC domain, added a user ns36225 in this domain. During application setup it is looking for DCOM account in hst-pcs5424 account not in my ABC domain. So i need to add a user to the system account that should work without the LAN netwrok. But now my user account won't work with LAN.

Error while creating application on Oracle IPM

While trying to create an application on Oracle Imaging and Process Management (IPM) the following error is encountered-
Event generated by user 'IPM_SystemServiceUser' at host 'CIS'. Cannot create application. Unable to execute service method 'ipmConfigureApplicationProfiles'. Null pointer is dereferenced. [ Details ]
An error has occurred. The stack trace below shows more information.
*!csUserEventMessage,IPM_SystemServiceUser,CIS!$!csIpmCannotCreateApp!csUnableToExecMethod,ipmConfigureApplicationProfiles!syNullPointerException*
intradoc.common.ServiceException: !csIpmCannotCreateApp!csUnableToExecMethod,ipmConfigureApplicationProfiles
**ScriptStack IPM_CREATE_APPLICATION*
*3:ipmConfigureApplicationProfiles,**no captured values***
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.Service.createServiceException(Service.java:2249)
at intradoc.server.Service.doCodeEx(Service.java:584)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
at intradoc.server.Service.doActions(Service.java:472)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
at intradoc.server.Service.executeActions(Service.java:458)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.NullPointerException
at oracle.imaging.intradoc.MetaDataUtils.addOptionValue(MetaDataUtils.java:123)
at oracle.imaging.intradoc.IpmRepositoryProfileUtils.createOrUpdateApplicationProfile(IpmRepositoryProfileUtils.java:765)
at oracle.imaging.intradoc.IpmApplicationService.ipmConfigureApplicationProfiles(IpmApplicationService.java:478)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
at intradoc.server.Service.doCodeEx(Service.java:550)
... 15 more
The component IpmRepository is enabled.
The following is the configuration used while creating the application on IPM
Application Security -weblogic
Document Security - Administrators (group)
Storage policy-
Document storage - Database AAArule (custom file storage rule)
Supporting content storage - Database AAArule (custom file storage rule)
No workflow configuration defined
Have tried creating application with other security groups and filesystem storage but the error persists

Hi,
There seems to issues in the profiles which being created in UCM.
Can you check the Trigger Field which has been configured for the profiles ? If the trigger field has been configured as Type, can you change it to any of the other custom defined Information fields and then create the application.
To access the Trigger Fields navigate to the WCC web console, Administration --> Admin Applets --> Config Manager --> Profiles --> Trigger Field.
Thanks
Aditya

Error while running "Create Application" wizard

Hello,
I'm trying to use the "Create Application" wizard (APEX 3.1.0) to generate a report/form application based on a table. When running the last step of the wizard, the process fails with the following info:
ORA-20001: Unable to create modules. ORA-20001: Create pages error. ORA-20001: Unable to create form page. ORA-20001: Error page=2 item="P2_SZRXSTG_APPL_COLLEGE_STATE_" id="1625410167910413" ORA-20001: Error page=2 item="P2_SZRXSTG_APPL_COLLEGE_STATE_" id="1625410167910413" has same name as existing application-level item. ORA-0000: normal, successful completion
Unable to create application.
These are the three table columns that seem to be causing the error:
SZRXSTG_APPL_COLLEGE_STATE_1
SZRXSTG_APPL_COLLEGE_STATE_2
SZRXSTG_APPL_COLLEGE_STATE_3
From what I can tell, when generating the code, APEX seems to be cutting off the last character from the column names and it's attempting to create multiple items for the same column.
Any ideas on how to work around this?
Thank you,
Teddy
Update:
Seems the reason is because total length of an item name in APEX is 30 chars. My column name is 28 characters, and when the wizard is creating the page items, it prefixes each column name with a "P2_" which pushes the last char off the column name.
As a work around, I just created the report and form pages separately, and chose not to add those three columns to the form page.
Out of curiosity, is this something we can avoid or work around any other way, or will I have to always be wary of my column names in this sense?

Looks like the long column names mess up the wizard. You can create an application on a "similar" table, one with shorter column names. Then edit it the page processes that refer to the column names/table name to refer to the real table name and column names.
Scott

How to create application log in SAP

According to my reqirement,I need to display messages in the application log whenever some updation is done.
How to do create application log and display messages in the application log.

Hello Smriti
If you have interface IF_RECA_MESSAGE_LIST available on your system then I highly recommend to use as message collector.
When you create an instance of the interface (CF_RECA_MESSAGE_LIST=>CREATE) you can provide an application log object.
The collected messages can easily be saved as log.
For an example have a look at my Wiki posting [Message Handling - Finding the Needle in the Haystack|https://wiki.sdn.sap.com/wiki/display/profile/2007/07/09/MessageHandling-FindingtheNeedleintheHaystack]
Regards
Uwe

Error when create application - apex 4.0

hi all,
i have problem when create new project in apex.
my step to create project :
1. in oracle from i create simple form ,in form just textA - textB and button arithmetic.
2. in command prompt, i'm type iff2xml90 (form_name)
3. run apex like http://localhost:8080/apex/ and login
4. i'm click Application Builder icon
5. click Migration on the right side of the page
6. on the Application Migration page, i'm click Create Project
7. i'm enter thr project detail and upload Forms Module XML File (i'm made in point 1)
8. project successful i'm created
9. i'm create Application and show Generate Application and enter the detail,next
but in point 9 have error when i'm Create Application.
the error is _"1 error has occurred * The project, "Penjumlahan" does not contain any Blocks associated with database objects."_
how fix the problem?
thx :):):)

Hi Beny,
I think it would be better to post this question to another forum: {forum:id=137}
Thanks,
Udo
P.S.: Please mark this thread as answered anyway.

Can't create Application Role in Obiee 11g Enterprise Manager

Hi All,
I was working on obiee11g enterprise manager. I created some of the groups in weblogic console. Now I wanted to create application roles in enterprise manager for those groups. I am surprised that, the "*Create*" button is inactive on the application role page of enterprise manager. I only i could see tthe actives ones "*Create Like*", "*Edit*" and "*Delete*".
Please assist shoud I need any additional configuration for the same.urgent!!
Thank you in advance,
BK.

Click on Create Like button
Then click cancel on the Create Like dialog box
Go back to the Create button, it now works
But if you log out and log back in, the Create button is disabled again
so may repeat the above process of accessing the 'Create Like' button first to enable the Create button
< Bug:13983399> CREATE BUTTON IS DISABLED IN FUSION MIDDLEWARE CONTROL IN OBIEE 11.1.1.6.0 ENV
Please mark helpful or correct if answered.
Thanks,
- A.Y

How to create application toolbar in modal dialog box in selection-screen

Hi Experts,
how to create application toolbar in modal dialog box in selection-screen?
Regards,
Swapnika

Hi,
Check the following link regarding Model dialog box and appication toolbar
http://help.sap.com/saphelp_nw70/helpdata/en/d1/801b84454211d189710000e8322d00/frameset.htm
It helps in solving your problem.
Thanks.
Ramya.

Create Application specific Log under NetWeaver 7.1 SP3

Hi
I want to create application specific Log and read the following article https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f361cbea-0c01-0010-a3a0-8948bebb0a23
But I use the NetWeaver 7.1 SP3 and I cannot find the Log-configuration.xml. Please tell me how i can create the application specific log under NetWeaver 7.1 SP3?
And I find out the documents are not updated for Netweaver 7.1 SP3... It costs more time for me to find out a solution.
Thanks in advance
Kind Regards!
Ping

Hallo
I think I find the solution
start <SAP_install_dir>/<system_name>/<instance_name>/j2ee/configtool and use the log configuration to change the settings..
Please read http://help.sap.com/saphelp_nwce10/helpdata/en/45/6c9bfc02d81c90e10000000a11466f/frameset.htm
Kind regards!
Ping

HTMLDB 1.6 - 'Create Application' button results in Error

Hi,
I've downloaded and installed HTMLDB 1.6 from OTN and have followed the instructions from the OBE tutorial. After fighting with the dads.conf file and the HTTP server, I've managed to log in and complete the tutorial.
The problem I now have is that whenever I click on 'Create Application' in the OBE workspace, I get another page which says:
Error ERR-1014 Application not found.
application=4000 workspace=10
Also, Enterprise Manager reports that there are 23 invalid objects in the FLOWS_010600 schema,6 invalid objects in the FLOWS_FILES schema, and 6 invalid objects in the PUBLIC schema.
Much help would be appreciated.
Thanks
Bal

Hi Sergio,
Thank you for responding. I am running HTMLDB 1.6 on 10g(10.1.0.3.0) on Suse 9.1 I suspect the installation is at fault, therefore I am re-installing it. I'll keep you posted on my progress.
Thanks,
Bal

"Create Application from Database" and BLOB type

Hi all,
I see many threads about BLOB type but my question is related to the Flex Builder built-in feature "Create Application from Database".
Is there a way or a sw version to automatically use MySQL BLOB types when creating a PHP/database application?
Thank you!

Hi Dave,
Would you please file a bug with all the necessary details
regarding this issue? The bug base is found at:
http://bugs.adobe.com/jira.
We’ll look into this. Thank you for letting us know!
Lacra

Create Application system Dialog box poping up when ever designer is invoked, Then...

Hi,
we had recently installed designer in our systems but when we invoke designer we got Create Application system Dialog box poping up , Then when i give an application name the following error comes up
RME-00011 Operation INS on CI_APPLICATION_SYSTEMS has failed
RME-02124 Failed to execute Sql Statement
begin
errcnt := rmmes.getsize;
rmmes.getall (:errutil,:errcode,:err1,:err2,:err3,:err4,:e rr5,:err6,:err7);
end;
RME-02105 Oracle error occurred
ORA-06512 Line 157 in repos_user.rmmes
ora-06512 at line 3
ora-01403 No Data Found
Please check for these errors and if possible mail your replies to the following email : [email protected]
ASASP
Thanking in advance
Chan

Hi Timo.
In my application all the navigation rules are defined in faces-config.xml.
But I found following statement in the "fusion developers guide"
'**You cannot specify dialog:syntax in navigation rules within the faces-config.xml file if your Fusion web application uses ADF Controller features such as task flows. However, you can use the dialog:syntax in the control flow rules that you specify in the adfc-config.xml file.**'
Since, my application is using faces-config.xml for defining navigation rules and using task-flow as well, I suspect , this is the root of my problem.
Do u have any solution for it?
Thanks
Vikas

Create Application from Database and Air

I have tried several time to use the create application from
database for an air app build in flex. I do the same steps and the
only difference is that I click the create button as air not web.
It does not seem to work. Does the create application from database
command (referencing php mysql) work with Air???
Thanks

Hi Dave,
Would you please file a bug with all the necessary details
regarding this issue? The bug base is found at:
http://bugs.adobe.com/jira.
We’ll look into this. Thank you for letting us know!
Lacra

Create application from database issues

Just trying out the 'Create application from database'
feature and found the following.
Running:
Vista
Flex Builder 3 Public Beta 2
Visual Studio 2008
- The wizard cant find the development web server so IIS is
the only choice. I assume VS2005 & 2008 are different.
- When validating the IIS option it would always fail until I
enabled directory browsing (IIS 7).
- When creating a SQL connection the wizard will not connect
to a SQL 2005 named instance. Tried 'localhost\instance' and
'hostname\instance' and get the following error.
java.sql.SQLException: Unknown server host name
'DMC\DEV2005'.
at
net.sourceforge.jtds.jdbc.ConnectionJDBC2.<init>(ConnectionJDBC2.java:364)
at
net.sourceforge.jtds.jdbc.ConnectionJDBC3.<init>(ConnectionJDBC3.java:50)
Dave

Hi Dave,
Would you please file a bug with all the necessary details
regarding this issue? The bug base is found at:
http://bugs.adobe.com/jira.
We’ll look into this. Thank you for letting us know!
Lacra

Create Application in VC

Similar Messages

Maybe you are looking for