Create asset using scat template

Hai gurus,
my finance user create LVA asset using scat template and the procument make the PO. When the user want to make good receipt it give an error. when i check using as03 the asset already have capitalized date on previous year. How this came? or this is a bug? how can the asset thatn just created and make the po not yet good receipt but have the capitalized date?
Anyone have same experience?
Regards,
muzaidi

Hi muzaidi,
It sounds like the capitalization date is getting entered through the SCAT.  Try to identify if the capitalization date is a field being entered when running the SCAT.  Look for field name ANLA-AKTIV.
In the meantime, use Tcode AS02 to try to remove the existing capitalization date.  If the item is not modifiable, use Tcode SPRO -> Financial Accounting -> Asset Accounting -> Master Data -> Screen Layout -> Define Screen Layout for Asset Master Data.  For the applicable screen layout rule make the capitalization date modifiable on both the main and sub asset number levels.
Thanks,
Chad

Similar Messages

  • Getting error while creating subsite using custom template in sharepoint2013

    Hi,
    I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
    Please suggest me on this.
    Thanks in advance.

    You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
    on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
    Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Problem while creating assets using BAPI

    Use table enhancement BAPI_TE_ANLU
    Diagnosis :The BAPIs for creating and changing assets currently support only those customer enhancements that relate to the user fields created using SAP enhancement AIST0002.
    Can anybody give the appropriate solution why this error is coming while creating assets using BAPI.

    Looks like you are trying to transfer custom fields into the asset master data that were not added following the steps in enhancement AIST0002.
    Using EXTENSIONIN parameter, you can transfer user fields from the asset master record. However, it is not possible to transfer fields that are updated in user-defined tables. Only user fields that were defined using SAP enhancement AIST0002 and are automatically updated in table ANLU can be udpated in this way. This means you have to use table extension BAPI_TE_ANLU.
    Enhancement AIST0002 contains function module EXIT_SAPL1022_001 as a component in which user fields can be implemented.
    The documentation ( BAPIPAREX) of the structure that forms the basis for this parameter contains additional information about using this parameter.
    Please check how table ANLU has been enhanced and also go through the documentation of enhancement AIST0002.
    Regards,
    Shyam

  • To create asset using SAP-PS

    Hi experts,
         Is there any way to create asset using PS.

    Hi,
    Yes it can be done through PS, but for the same you need to define the Investment Profile and assingment of the WBS element to the same.
    In this case settlement rule will be generated for the WBSE elements under AUC when you release the WBSE and the same will be settled finally to the Assest when the WBSE or project is technicallay closed.
    Thanks & regards,
    Kundan Kishore

  • Create XML using Data Templates

    Is anyone familiar will a tool, other than oracle that will create XML from data template definitions.
    I trying to understand if the data template definitions are an Oracle specific tool that only Oracle can use to generate XML files.
    If this is specific to Oracle, is there an easier way to use the data templates to generate XML without registering them in the concurrent manager, XMLP Admin, and then executing the concurrent process?
    I'm looking for a shortcut to testing these files without having to register everything.

    Why not using XML Publisher Standalone aka Enterprise 5.6.2 ?
    There you can generate the XML based on data templates without registering anything. The installation is quite easy.
    Juergen

  • Error while creating Contractors using Request Template

    Hi,
    Logged in as "xelsysadm". I have created "Contractor Request Template".
    Logged in as "ContractorAdministrator" for him "ContractorRole"(Request Administrators) and "Contractor Authorization Policy"(create user) assigned.
    When Contractor Administrator tries to create a contractor using "Contractor Request Template" getting the below errors...
    oracle.iam.request.exception.AccessDeniedException: IAM-2050059:User OIMINTERNAL does not have access to create the request using Contractor Create User request template.
         at oracle.iam.request.repository.RequestTemplateManager.checkRoleAuthorization(RequestTemplateManager.java:165)
         at oracle.iam.request.repository.RequestTemplateManager.getTemplateForRequestCreation(RequestTemplateManager.java:218)
    oracle.iam.request.exception.InvalidRequestDataException: IAM-2040049:UserManager Access Denied.:
         at oracle.iam.requestactions.plugins.datavalidator.CreateUserDataValidator.validate(CreateUserDataValidator.java:651)
         at oracle.iam.request.impl.RequestEngine.validateRequest(RequestEngine.java:1695)
    Please help me..
    Thanks,
    Madhavi

    If you are not using Template level approval you must associate approval policy( for Request level and operational level). I suggest, you change it to Template level .
    To verify this follow below link
    http://docs.oracle.com/cd/E14571_01/doc.1111/e14309/request.htm#OMDEV2873
    create request template
    http://docs.oracle.com/cd/E14571_01/doc.1111/e14316/req.htm

  • Adobe Acrobat as a server to create PDF using PDF templates and field values

    I'm writing a web page to create a PDF using fields that we ask for them in the screen.
    My idea is:
    1. Ask for field values (text values and a photo) in my web
    2. Run Adobe Acrobat to load a PDF template (PDF form) and mix with the field values
    3. Create a final PDF mixing values and template
    4. Show to document to the user in his client web browser. I guess the only way to do that is to create the PDF on a server with Adobe Acrobat Pro and send to the user browser a JPEG that will represent the  PDF: If I do this operation in the PDF visor at the client browser, the problem is that it will will be mandatory to install Adobe Acrobat in each cliente because only this visor can manage javascript.
    Can you tell me if this idea is correct? It is possible to use Adobe Acrobat on a Server to create PDF when some proccess needs?

    and what other Adobe product o procedure can we use to do that?
    I only need to create a PDF mixing PDF Templete, field values and javascript.
    Thanks for your help.

  • Error while creating the ASSET using LSMW BAPI method ( BUS1022 )

    Hello,
    Im creating assets using the below LSMW BAPI method
    Business Object      BUS1022     
    Method                     CREATEINCLVALUES
    Message Type         FIXEDASSET_CREATEINCLVALU
    Basic Type              FIXEDASSET_CREATEINCLVALU
    the following errors were triggered while populating the values to ACQ_VALUE and ORD_DEP value.
    Correction to ordinary dep. greater than acc. dep. in area 01
    Correction to ordinary dep. greater than acc. dep. in area 30
    Correction to ordinary dep. greater than acc. dep. in area 31
    Correction to ordinary dep. greater than acc. dep. in area 32
    if i pass only ACQ_VALUE, I am able to create the asset with out any issues.
    Can you guys plz guide me to fix this issue to create the asset with both ACQ_VALUE and ORD_DEP values??
    Cheers,
    Sriram.

    Hello,
    Review AO21.
    Regards
    Waza

  • Error while creating fixed asset using BAPI BAPI_FIXEDASSET_OVRTAKE_CREATE

    Hi
    I am getting an error stating "O DEP START field is not ready for input, while trying to create asset using the BAPI BAPI_FIXEDASSET_OVRTAKE_CREATE.How to make the field input enabled in BAPI .Kindly suggest.
    Thanks

    Hello,
    Review AO21.
    Regards
    Waza

  • Create and use templates

    Hi, experts,
        When i created a document from a template,why i can't find the template( which i have created and activated in the system configuration) in the selection?
    Thanks!

    Hi sandy,
    follow these steps
    Check and Configure the
    Template Service
    Task:
    Check the template service is activated and define the location of templates and
    template groups.
    1. Log on as EP300.A-## to check that the template service is running and
    define the location of the template groups and templates.
    a) In the top level navigation, choose System Administration → System
    Configuration and navigate to Knowledge Management → Content
    Management → Global Services → Template Service. If Template
    Service is invisible in Global Services, choose Mode → Advanced.
    b) Ensure that in Template Service, the Active box is checked. Note
    the paths for the template groups and templates. The default path
    is/documents/Templates.
    c) Choose Show Advanced Options if the Active box is missing.
    2. Create the folders that have been defined in the configuration for templates
    and template groups.
    a) Choose Content Administration → KM Content → documents.
    b) Choose Folder → New → Folder.
    c) Enter the name Templates and choose Save.
    d) Open this folder and create a new folder for the templates. The folder
    must have the same name as that defined in the configuration, so use
    SingleTemplates.
    e) Create now a folder for the template groups in folder Templates. The
    folder name must be the name defined in the configuration, so use
    TemplateGroups.
    Create and Use Single
    Templates
    Task:
    Upload documents that will be used as templates. Activate these templates for a
    specific folder and create new documents based on these templates.
    1. Upload the documents Exercise.doc, Solution.doc, and Unit.ppt from
    \Courses\EP300 62\Exercises\Template Service on the training share to the
    folder SingleTemplates.
    a) Choose Content Administration → KM Content and navigate
    todocuments/Templates/SingleTemplates.
    b) In the SingleTemplates folder, choose Folder → New → Upload.
    c) Choose Browse to locate the file in \Courses\EP300
    62\Exercises\Template Service, for example, Exercise.doc, and choose
    Open.
    d) Choose Upload and repeat these steps for the other documents.
    e) When all the templates have been uploaded, choose Done.
    2. Activate the templates Exercise.doc, Solution.doc, and Unit.ppt for the
    documents## folder.
    a) Locate the documents## folder. Navigate to the folder by choosing
    Content Administration → KM Content and select documents/Public
    Documents/documents##.
    b) Click on the context menu for documents## and choose Details →
    Settings → Templates.
    c) Select all the templates (select the checkboxes) and choose Save and
    then Close.
    3. Create new documents in the documents## folder based on these templates.
    a) Within the documents## folder, choose Folder → New → From
    Template and choose a template. Because the templates have been
    activated only in this folder, the template selection is also only available
    for this folder.
    b) Enter a name and choose Save.
    award me points if it helpful

  • How to set for an asset a mandatory template?

    My problem is, users can create assets and leave template attribute as null. I don´t want that. I want to set template as a mandatory field.
    I request help.

    Maybe you can try to customize "ContentForm"
    OpenMarket/Xcelerate/AssetType/YourNewAssetType
    <ics:setvar name='TemplateChosen' value='TeplateByDeafult'/>
    http://docs.oracle.com/cd/E29542_01/doc.1111/e29634/data_designbasictype.htm#CHDBIFEE
    Regards,

  • Want to create iView using iView teplate ?

    Dear Experts ,
    I want to create iView using exixting template .but when I click the check box to create iView using exixting templates
    and hit next its not taking me to list options of existing teplate.
    I am not getting any error just getting white page instead of taking me to the liat of all existing templates.
    Any Idea Why its behaving like this.
    Aswers will be awarded accordingly
    Rgrds

    did you check the log file under http://server:port/nwa-monitoring-logs and traces-sap logs
    are you accessing the portal with fully qualified domain name
    reward points if helpful

  • How to generate xml using "Data Template"

    Hi,
    Can any one please tell me the steps to create xml using "Data Template".
    As per the user guide the execution method for "data Template" is "Java Concurrent Program" and the Executable mentiones is "XDODTEXE".
    But there is no information about the "execution file name" and "execution path name" which is mandatory.
    Thanks and Regards,
    Sandhya

    Hi Sandhya,
    To put a Data Template into use, you don't need to define any new executables. XDODTEXE executable is already registered in the system, as it ships with the application. The Data Template is not an executable as such, but a collection of instructions for what queries to perform and what should the resulting XML look like. XDODTEXE knows how to interpret those instructions, and produce the XML output.
    (And if you add a layout template, handle that too.)
    You do need to do the following:
    1) Create a new Data Definition (XML Publisher Administrator > Data Definitions)
    2) Upload your Data Template (remember the Code for the next step)
    3) Create a Concurrent Program that is linked to the Data Definition (Short Name = Code) (System Administrator > Program > Define)
    4) Add your Concurrent Program to a Request Group (System Administrator > Security > Responsibility > Request)
    I recommend you take a look at the XML Publisher Administration and Developer's Guide, you will find more information there.
    (http://download-west.oracle.com/docs/cd/B40089_02/current/acrobat/120xdoig.pdf)
    Best Regards & Happy New Year 2008,
    Matilda Smeds

  • Create a custom web template using VS 2012 with web features,site features sections applied

    hi,
     Want to create a  custom web template using VS 2012  in my SP 2013 environment.  i know "Vesku" has posted a great artice on this [  based on prev. version of SP].
    here -
    http://blogs.msdn.com/b/vesku/archive/2010/10/14/sharepoint-2010-and-web-templates.aspx
    i am  looking for a code based article  which has step by step process which provides how to add the site features, web features and attach the eventreceivers etc etc on sitecollection creation when i apply this template from central admin. 
    can anyone provide me any links / any source how to create a custom web template with one / two  custom features -  site features element and web features element , / master page etc ....
    I am stuck with this. as part of my reqmnt, i need to create a webtemplate with all the customlistinstances, custompagelayouts, custom masterpages, custom appln pages, custom web parts.
    help is appreciated !
    Das

    The problem is that Web Templates are deployed to a gallery in a site collection and aren't available in Central Admin when creating a new site collection.  YOu have to create the site collection without choosing a template and then choose your web
    template when you first access the root site in the site collection.  Here's an article that discusses that process here:
    http://sharepointchick.com/archive/2011/02/10/using-web-templates-to-create-site-collections.aspx
    Other than that Vesa's article is still the best one and works essentially the same in 2013 as it does in 2010.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Error while creating Legacy Asset using AS91

    Error is as follows
    E698 SYST: Abnormal termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR
    In 2008 during implementation, there was a mis match between FI & AA.
    In AA Takeover values were not updated but GL entry was made. Now since depreciation is run, it is not allowing to update takeover values in AS92.
    Now the i have planned to follow this procedure
    Firstly Reset Depreciation
    Then to create new Assets in AA copying previous assets without Takeover values using AS 91 & update those takeover values in new assets.
    Then FI & AA values would match & then i can run depreciation.
    But in 2nd step i am stucked, as when i try creating new asset using AS91 it is giving above error.
    What should be date of legacy data transfer in spro? i have maintained 30.09.2008
    In OAAQ i have maintained closed FY =2007
    In OB52 i have Opened both 2008 & 2009 posting periods.
    What more has to be done?

    Hi Paul
    I have taken a production copy in different client & have done all these with the client's permission.
    Following are the reasons with example
    suppose these are 4 assets at the time of implementation
    1 Asset A       Acquisition value 100000/-      Accumulated Depreciation       20000/-
    2 Asset B       Acquisition value 200000/-      Accumulated Depreciation       30000/-
    3 Asset C       Acquisition value 300000/-      Accumulated Depreciation       40000/-
    4 Asset D       Acquisition value 400000/-      Accumulated Depreciation       50000/-
    In implementation following happened by mistakenly
    Asset A & B were properly created using AS91 & in GL also entry properly made using OASV
    but for Asset C, entry was made using OASV but in AA Tcode AS91 Asset Master was created but Takeover values were not updated.
    for Asset D entry was made in OASV but in AA Asset number was not at all created.
    so when you see asset master C in AW01N acquisition value is blank & planned depreciation is also missing.
    i think individually all data was not cross tallyied.
    So the Balance sheet is tallyied with entry in FI
    but
    in AA there are 100 assets without takeover values & 300 assets for which Asset Masters are not at all created in  AA.
    & depreciation for 2008 has been run on other assets excluding these 400 assets.
    So now AA closing cannot be done as the FI & AA balances are not reconciled.
    & now we have to update takeover values creating new asset masters using AS91 but system is not allowing us.
    Could you suggest some solution for these problems
    Thanks in Advance

Maybe you are looking for