Create backup router with licenses.encrpty on both R1 and R2

What is the best way to copy a router config from one router to another router. The second will be our back-up router ready for any outage. We have SSL and IPSec VPN with licensing on both devices. I want R2 to be very much alike R1. If I just transfer the configuration, my licenses become corrupted. Any advice is greatly appreciated. We have two 891k9 routers with advanced services.
JP

You say you have licensing on both routers, is that also the SSL-license ore only the security-license? If you don't have the SSL-llicense on the secondary router, then you have to contact cisco as Leo said.
But if both routers are fully licensed, then you should be able to transfer the config from one router to the other. If that doesn't work, please show us *exactly* what you did. Best with a copy/paste of the terminal session.

Similar Messages

  • I currently use an iPhone, an iPad, and a Mac computer for business.  The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me.  Currently, this has created a mess of duplicate contacts.  Please researc

    I currently use an iPhone, an iPad, and a Mac computer for business.  The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me.  Currently, this has created a mess of duplicate contacts.  Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates.  There are several applications available that remove duplicates, but I am not sure which ones work or don't work.  I want information on this, but most importantly I want to understand how to fix this problem permanently.  Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates.  I don't have Lion, but I would be willing to get it, if this would fix the problem.

    Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
    Message was edited by: mfduran

  • I want to create a form with a manager completing one section and a staff member another. Both sections protected by different passwords.

    I want to create a form with a manager completing one section and a staff member another. Neither should be able to edit the others. Can different sections be password protected by different passwords? I'm thinking there might be an "official use only" function.

    You can use 2 forms in one portfolio.

  • Creating backup Job with DBMS_SCHEDULER

    Hello,
    Can someone please help me out here:
    I'm using Oracle10g release 1 on windowsXP
    I'm trying to create a backup job with dbms_scheduler and it's not working.
    This is what I did:
    I created a job as follows:
    BEGIN
    dbms_scheduler.create_job (
    job_name => 'RMAN_FULL',
    job_type => 'EXCUTABLE',
    job_action => 'E:\wkdir\rman_bkp',
    enabled => TRUE,
    start_date => '24-NOV-2007 2:10:00 PM',
    repeat_interval => 'FREQ=WEEKLY',
    comments => 'Full Database Backup');
    END;
    While rman_bkp is an RMAN command but it wasn't working.
    Please where do I get it wrong?
    Kindly put me through the EXECUTABLE or should I use PL/SQL_BLOCK and how?
    Thanks.
    Regards,
    Cherish

    Hi,
    There is a guide to running external jobs using the Scheduler here
    Guide to External Jobs on 10g with dbms_scheduler e.g. scripts,batch files
    You need to use the full path to a real Windows executable and the arguments to it e.g. for a batch script you would have to do something like
    c:\windows\cmd.exe /q /c c:\myscript.bat
    There is a forum dedicated to the Scheduler here
    Scheduler
    Hope this helps,
    Ravi.

  • Weird issues with file share using both SMB and AFP?

    I use my Xserve with 10.4 server primarily as a file server (with a huge RAID array attached via Ultra320 SCSI). I've served files from this server over SMB ("Windows" sharing) to both PCs and Macs for a few years now with no big issues. The files are being shared in a collaborative environment with extensive user accounts and ACLs set up.
    I would like to turn on AFP for these same file shares, so those accessing with a Mac can have the added benefits of AFP over SMB. However, I've heard some rumors of some complicated issues developing from the use of both AFP and SMB together on the same folders, in a mixed environment.
    The rumors I've heard are things that would happen rarely but enough for it to be significant. For example, a file created over SMB and then edited over AFP would have some problems being re-edited over SMB again, due to some complicated feature that the rumor is unable to explain (something with a resource fork or file locking?). Maybe something weird that just involves the Adobe Creative Suite?
    Anyway, I figured I'd throw this out there. Anyone who serves files over both protocols to a varied set of computers and applications having weird issues? Or is everything working for you? Thanks in advance.
    Message was edited by: dtemp

    Thanks for the responses!
    re:crop
    It's coming in as cropped with no way to fix it that I can see.
    Pressing space or opening in preview shows the full image but if it gets anywhere near Photoshop it comes in auto-cropped.
    I'm starting to this it's a bug and will be reporting it to Adobe.

  • Printing/creating PDF problems with Mac OS 10.6.4 and word v.X

    In my job at university I use Word 2003 (version 10) in my new iMac. Since I updated to MacOS 10.6.4 I have problems with the printing menu. That means that I can not print or convert to PDF or even generate a preview. When trying to print or obtain a preview, word freezes and I have to force quit. When trying to generate a pdf file it does, but the generated file is unreadable (it says is damaged) and word freezes again. I have played with the preferences, change user and it didn't help. I checked the Font Book and indeed they were many duplicated fonts. I sorted them out, but the problem persists. With very short files it works, but with longer ones word invariably crashes when trying to print or make a pdf. I took one long .doc file and I copied into my laptop (MacBook pro, 2008) that was running 10.6.3. I printed it and converted to pdf; no problems at all. Then, for the sake of knowledge, I updated the system to 10.4.6 and then I couldn't print or create a pdf with the very same file, so it seems that certainly the update is reponsible. So now I know cause but I can not print from any of my computers. To me convert to pdf is an important functionality so I would appreciate any help. I have some ideas: reinstall Office 2003? reinstall 10.6 from the disk (and not update)? use Time Machine to restore the system as it was before the update?
    I didn't detect problems in Office 2004, or any other programs in my macs. Unfortunately, I need Office 2003 for compatibility with some other software. Thanks in advance!

    I updated my MBP to 10.6.4 last night and today I was printing fine from Word 2008 (v12.2.5). I haven't used Office vX since Tiger so I cannot comment on its stability with the latest update. But I suggest that if you haven't done so already, try opening Disk Utility and running Repair Disk Permissions on the 10.6.4 partition. Once this has completed I also suggest that you reset the printing system, restart your Mac and then add your printer queues again.
    *How to Reset the Printing System*
    1. Open System Preferences > Print & Fax
    2. Move your mouse over the Printers list
    3. Hold down the Control button and click the mouse (or right click if supported).
    4. Click "Reset printing system ..."
    5. Restart your Mac

  • Help with a PCR using both 401KL and 401KS

    Hi,
    Has anyone set up a supplemental savings plan that begins deductions when 401k limits hit either 401KL or 401KS?  I have it setup using 401KS and it works great but unfortunately that scenario is only for one employee out of 48.  I really need to be able to compare against both 401KS and 401KL to fully automate this.  I'm new to PCR's  so any advice would be greatly appreciated...
    Thank you,
    Stephanie

    I'm sorry.  Here is the query:
    --Declare @EMail_Address nvarchar(100) = null
    Select SVAssociationID.R_ShortValue as MATRIX_AssociationID, Matrix_Modified_DT as Matrix_LastModified
      ,RTRIM (MLS_ID) As Matrix_MLS_ID
      , ISNULL(EMail_Address, '') AS MATRIX_member_Email
      ,RTRIM (EMail_Address) as Matrix_Member_EMail
      --,RTRIM( LTRIM(  ISNULL (@EMail_Address, '') ) ) as Matrix_Member_EMail 
      ,Last_Name AS MATRIX_LastName, Nickname AS MATRIX_NickName
      FROM    dbo.Agent_Roster_VIEW a
            LEFT JOIN dbo.select_values_VIEW SV ON a.Status_SEARCH = SV.ID
            LEFT JOIN dbo.select_values_VIEW BillType ON a.Bill_Type_Code_SEARCH = BillType.ID
      LEFT JOIN dbo.select_values_VIEW SVAssociationID ON A.Primary_Association_SEARCH = SVAssociationID.ID
    WHERE   Status_SEARCH IN (66,68) 
        Order by MLS_ID
    Results:
    MATRIX_AssociationID
    Matrix_LastModified
    Matrix_MLS_ID
    MATRIX_member_Email
    Matrix_Member_EMail
    MATRIX_LastName
    MATRIX_NickName
    STC
    09/02/14
    CCWILLI
    [email protected]
    [email protected]
    Williams                      
    Christine   
    STC
    09/12/14
    CCWORSL
    [email protected]
    [email protected]
    Worsley                       
    Charlie
    STC
    09/02/14
    CCYROBIN
    NULL
    Robinson       
    ECBR
    09/02/14
    CDABLACK
    [email protected]
    [email protected]
    Black                         
    Dale        
    STC
    09/02/14
    CDABRADY
    [email protected]
    [email protected]
    Brady                         
    David       
    Thank you,

  • 2921 router with license

    we bought one 2921 router and instaled the licenses (uc,security,srst).but now the ios should be upgraded.what will happen to the liceses,if we upgrade the ios?
    thanks
    kavi

    hi Kavithas,
    For ISRG2 - the Universal IOS image is loaded by Cisco manufacturing on all shipped routers. IOS Universal Image contains all IOS features. Feature sets in the universal image are unlocked using licensing keys i.e. the level of IOS functionality available is determined by the license applied to the device. A new license only needs to be applied to upgrade IOS functionality on the router .Moving from one IOS universal image version to another does not require a new licensing key. Reboot of router is also licensing transparent.
    Each licensing Key is unique to a particular device and is obtained from Cisco by providing the product ID and serial number of the router and a Product Activation Key (PAK), which is provided by Cisco at time of Software purchase. Therefore is not directly dependent on the software used.
    Hope this helps!
    Regards,
    Karthik

  • Bin fitting with a counter using both analytics and model clause.

    11.2.0.3
    This falls under 'just want to figure out how to do it'. Its not critical for work. I want to try to see if its possible to do this with both analytic function and with a model clause. Just to see if its possible. It has been stumping me.
    I got the idea to look at this from this article about bin fitting. I have been playing with the model clause and I think you would do something with the 'increment' clause, but I dont see a way to reset it to 1 at a certain point.
    http://www.oracle.com/technetwork/issue-archive/2012/12-mar/o22asktom-1518271.html
    The case I want to look at is, bin fitting based on a counter and a partition by. In theory this should be simpler than the example in the link.
    [code]
    create table myrooms (
    room_number number,
    person_id        number);
    create unique index myrooms_ind on myrooms(room_number,person_id);
    [/code]
    Person_id is not unique. So row_number is more appropriate than rank or dense_rank.
    Problem: Partition by room_number, assign up to 50 people to a specific group with in the same room. This seems like it could be handled with a row_number() and a window clause, but that is not supported.
    I need to basically translate the old procedural counter into sql:
    pseudo-code that does not compile that would have a reason to use this logic.
    [code]
    declare
      cursor curGetRoom
         select room_number,person_id
            from my rooms
          order by room_number;
    counter number := 1;
    vCurrentRoom myroom.room_number%type;
    begin
        for i in curGetRoom loop
            if vCurrentRoom is null then
               vCurrentRoom := i.room_number;
            elsif vCurrentRoom = i.room_number then
                  if counter < 51 then counter :=counter+1;
                  else counter := 1;
            else
                 vCurrentRoom := i.room_number;
                counter :=1;
            end if;
    end;
    [/code]
    simple partition query., but I dont see a way to limit this to 50 and then start over. Window functions are not supported with row_number()
    [code]
    select room_number,person_id,row_number() over (partition by room_number order by person_id) rn
    from myrooms
    [/code]

    11.2.0.3
    This falls under 'just want to figure out how to do it'. Its not critical for work. I want to try to see if its possible to do this with both analytic function and with a model clause. Just to see if its possible. It has been stumping me.
    I got the idea to look at this from this article about bin fitting. I have been playing with the model clause and I think you would do something with the 'increment' clause, but I dont see a way to reset it to 1 at a certain point.
    http://www.oracle.com/technetwork/issue-archive/2012/12-mar/o22asktom-1518271.html
    The case I want to look at is, bin fitting based on a counter and a partition by. In theory this should be simpler than the example in the link.
    [code]
    create table myrooms (
    room_number number,
    person_id        number);
    create unique index myrooms_ind on myrooms(room_number,person_id);
    [/code]
    Person_id is not unique. So row_number is more appropriate than rank or dense_rank.
    Problem: Partition by room_number, assign up to 50 people to a specific group with in the same room. This seems like it could be handled with a row_number() and a window clause, but that is not supported.
    I need to basically translate the old procedural counter into sql:
    pseudo-code that does not compile that would have a reason to use this logic.
    [code]
    declare
      cursor curGetRoom
         select room_number,person_id
            from my rooms
          order by room_number;
    counter number := 1;
    vCurrentRoom myroom.room_number%type;
    begin
        for i in curGetRoom loop
            if vCurrentRoom is null then
               vCurrentRoom := i.room_number;
            elsif vCurrentRoom = i.room_number then
                  if counter < 51 then counter :=counter+1;
                  else counter := 1;
            else
                 vCurrentRoom := i.room_number;
                counter :=1;
            end if;
    end;
    [/code]
    simple partition query., but I dont see a way to limit this to 50 and then start over. Window functions are not supported with row_number()
    [code]
    select room_number,person_id,row_number() over (partition by room_number order by person_id) rn
    from myrooms
    [/code]

  • How to Best Create a DVD that will play on BOTH Mac and Windows

    Hello - Looking for some direction. How can I create an iDVD DVD that will play on both Mac & Win? I can not find a solution that will accomplish this. What I did was create an .img then burned to DVD. This plays fine on my Mac & on home stereo DVD but not on a windows machine. The Windows machine can "read" the DVD fine but WIndows Media Player can not play it. Do I need to have folks use a special player on WIndows? Is there another format the I should have iDVD output? I need to send some DVDs to college coaches for my son and am trying to do this the best way without knowing what platform (Mac or WIn) they will be using. What is the best approach?
    Thanks in advance for your help,
    David

    Hi
    There are two ways to burn a DVD.
    • as a Data-DVD (eg including a video.img file or any data)
    • as a Video-DVD
    A. Data DVD is what You creat by just popping in a DVD disk and OK to format it.
    B. Video-DVD - You make from within iDVD and insert thed DVD WHEN iDVD asks for it
    (OR - Via Disk Util tool - Still introduced when asked to do it !)
    (or via Roxio Toast™ - STILL not inserted until asked to do this)
    So what You've done is a Data-DVD with Your movie as an .img file on it.
    • Can only be playbacked on Your Mac
    Open "Disk Util tool"
    Then on Dasktop - Double click the .img file so that it creates a fake DVD disk
    Then in "Disk Util tool" - select it and click the Burn (Nuclear) button
    THEN insert a new DVD WHEN asked to do this.
    NOW ! ! Select a lower Burn Speed eg 4xDVD - This will result in a DVD with few burn errors and
    a PC will read it easier !
    Use of quality DVD brand is also important - I use Verbatim
    I use DVD-R
    Good Luck - Bengt W

  • How to create a FSV with the text groups in spabish and English

    Hi gurus,
    could you help me with a issue. I want to know where i can add the text in english in the groups of the fse2 , because i have tha configuration with spanish text but when i execute the f.01 with the language EN the system do not give text in English. So could you help me?
    best regards!

    I just tried it with our FSV, system language is EN and i executed the report in DE. I could see german texts but not on the FS items.
    I dont know, if that is possible because these are custom texts/input fields from you as compared to the system text converted to the required language on the report header and other layout fields
    If you want the FS items to also show text in 2 languages, i recommend creating another FSV in the alternate language and using it.

  • During setup of new Apple TV I am not able to progress past the screen that asks if I want to share usage info with Apple.  Using both wireless and hardwire setup I've answered no - then yes - but I cannot get the system to accept an answer. Anyone else?

    Aside from not being able to progress past the question of sharing info with Apple  - I've also noticed that the remote does not function when I presss the "select" button - only when I press the "menu" button can I acknowledge a question or a step in the setup proccess.  Help!

    From: Test Screen Name [email protected]
    Sent: Sunday, August 04, 2013 11:32 AM
    To: gunner0490
    Subject: I'm not able to open PDF files in Adobe Reader XI.
    Re: I'm not able to open PDF files in Adobe Reader XI.
    created by Test Screen Name <http://forums.adobe.com/people/TestScreenName>  in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

  • Photos showing up with no dates in both iphoto and aperture?

    Why has my photos of 60,000 plus have many of the photos with no dates on the library view in iphoto or aperture?  This causes my whole library to be out of order.  How do I go about getting those dates back so I can see them in events and search by date.  Some of the photos have dates and some just have a string of numbers associated with it.  Please help

    Can you please show a sample of the wrong dates - both for Aperture and iPhoto?
    What is your Aperture version and your iPhoto version exactly?
    What did you do, before this problem started? Have you tried already some trouble shooting, like repairing the Aperture library ? Aperture 3: Troubleshooting Basics http://support.apple.com/kb/HT3805
    Regards
    Léonie

  • My iphone4 performed 2 backups, one with all my stuff on it and one without.  How do I get my stuff from the previous backup?

    In the process of updated to iOS 5, my iphone4 performed a backup, after installing IOS5 it performed ANOTHER backup (not sure why), but without all my stuff being synced from iTunes, now the backup file (and my phone) contain NOTHING!
    How do I get the data from my previous backup back?!? Please Help!!  I have already looked into the backup fies on my PC and everything is from the second backup.
    I really need my contacts and photos back

    Ok. I have 2 hard drives and one of them died apparently so..not knowing what to do, I did chose reinstall Lion after command r open start-up. The whole thing is a mess but my computer is back up and running with the second hard drive. I had a time machine backup which I've been dragging stuff out of. i had to re enter serial numbers and do all sorts of initial set up stuff. 1) How do I get all of my icons (like my HD icon and external drives icons) to appear on my desktop again? I can only find them through a finder window. 2) i now have to type a password to get into my computer (user) - I 'm the only user and don't want to have to do that.

  • Window with no taskbar entry, both JWindow and undecorated frames dont work

    I wanted to create a borderless, window without a titlte bar, with no task bar entry, so as in JDK 1.3, I created a JWindow and it worked pretty good. Now that I have upgraded to JDK 1.4, it turns out that in order to get a focus to components with JWindow, you need to pass in a controller frame in the JWindow constructor, and this controller frame has to be made visible for the components within the window to have focus. Now that I pass in a controller frame to the JWindow constructor and make it visible, I see an icon for the window in the taskbar.
    The new way to create borderless window in JDK 1.4 is to create an undecorated frame, but for undecorated frames an icon always appear in the task bar.
    Anybody knows how to have a borderless window without a title bar and task bar entry in JDK 1.4. Any help would be highly appreciated.
    Thanks

    try creating a JDialog and call setUndecorated on it. I think Dialogs don't add taskbar entries.

Maybe you are looking for