Create Banner for Premiere Elements

I am trying to create a banner in Photoshop Elements to go at the bottom of a video in Premiere elements. I can't create the banner on the bottom of the layer, it always is in the middle of the layer.  How can I move it?

Could you please share the details of how you resolved the issue, so that if any other user has the same issue he can refer this thread.
Thanks
Harshit yadav

Similar Messages

  • How to get 64 bit version for premiere elements 12

    How to get  64-bit version for Premier Elements 12 ? 
    I download from ADMISY site.
    Click on win 64 bit and download it.
    When I try to install ther is a error  this download version is not for 64 bit I have try many times but same result

    Hello
    I have been away some days
    ADMISY is a software partners for Adobe
    I running Win 7 Home Edition
    I have received a card with a code when I bought the program and the I
    download from ADMISY
    Sending serial and installation warning
    PhotoshopElements_12_WWEFDJ.7z
    PhotoshopElements_12_WWEFDJ
    PremiereElements_12_WWEFDJ_win32.7z
    PremiereElements_12_WWEFDJ_win32
    I can not find a 64 bit version of 32-bit or 64-bit version of downloads
    This is information I have
    Best regards
    Erling Magnusson
    2015-02-04 22:33 GMT+01:00 Adobe Forums <[email protected]>:
        How to get 64 bit version for premiere elements 12  created by A.T.
    Romano <https://forums.adobe.com/people/A.T.+Romano> in *Premiere
    Elements* - View the full discussion
    <https://forums.adobe.com/message/7162950#7162950>

  • PrE 12.  How to deal with black screen "Created with Adobe Premiere Elements trial version"?

    I'm really considering purchasing PrE 12 and would like to try it out.  (I have another video editing software and would like to try this one.)
    When I add video, I get a black screen "Created with Adobe Premiere Elements trial version".  When I hit play, I can hear audio, but I don't get any video (just the black screen).  Is there a work around, a setting that I can change, or is the trial version supposed to show the black screen? 
    Thanks,

    To help with troubleshooting, some questions so people have more to work with
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Elements FAQ http://forums.adobe.com/thread/1042180
    And, exactly what are you editing?
    Codec & Format information, with 2 links inside to read
    -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • Can a video created with Adobe Premiere Elements 13 be converted to run on Adobe Premiere Elements 11?

    Can a video created with Adobe Premiere Elements 13 be converted to run (and be edited, etc.) on Adobe Premiere Elements 11?
    I have several hours invested in a video creation that I made with Premiere Elements 13, but now 13 is refusing to work properly (space bar and play button do not move the time line indicator forward).  Hopefully, I will get the problem solved, but in the meantime I must get this project completed and don't have time to start over.  So, I need to convert the work so that it can be completed with Premiere 11 which seems to work fine.
    Thanks, Dave

    Dave
    Is this an outdated thread? I thought that you had resolved the play button/space bar issue.
    Classically, you cannot open a project created in a later version in an earlier version. If you try, you get hit with "The project appears to be damaged, it cannot be opened." messaged. There was one rare and little known occasion when that was not the case. It involved Premiere Elements 10. So, that is not going to help us any here.
    If you still have the play button/space bar issue, can you get out of the 13 project by exporting it to file which you can import into a new Premiere Elements 11 project? If need be, I can suggest the details of that if you tell me the project setting for the 13 project.
    Please let us know the situation at this time.
    Thank you.
    ATR

  • Is there an Iris Heart transition available for Premiere Elements 12.1?

    As a wedding videographer, I have a need for an Iris Heart transition for Premiere Elements 12.1.  Does Adobe have one available for download?

    WRABVideo
    I have not had a chance to explore the Iris Heart Transition from on online source for use in Premiere Elements. But, I did want to share with you
    my initial "homemade" Iris Heart Transition that I created and explored in Premiere Elements 12/12.1.
    This is what it looked like as a YouTube test video
    Iris Heart Transition - YouTube
    The screenshot below shows the Premiere Elements 12 Timeline based on 6 jpg photos that was uploaded to its Publish+Share/Social Websites/YouTube with preset = High Definition Video for YouTube - 1920 x 1080.
    Applied Effects Tab/Applied Effects Palette/Track Matte Panel expanded was set at Matte: Video 3, Composite Using: Matte Alpha, and Reverse with a check mark next to it.
    Definitely space consuming compared to applying a single video transition between two side by side photos on a single video track.
    ATR

  • My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?

    My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?
    thanks

    for windows you should have an exe and a 7z file.  put both in the same directory and double click the exe.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Where can I find the PDF manual for Premiere Elements?

    Does Adobe have a full manual in PDF file format for Premiere Elements 9.0?
    P.S. Watch out for trying to handle large (> 700meg) AVI files.  Phone support says I'm SOL on bringing in my 6.5 gig 24 minute file.  Their solution?
    Bring it in small chunks or buy a new computer with more than 8gig of RAM.  Why don't they just tell you before you buy, that unless you have an awsome computer, don't waste your money on our software?

    Thanks John
    I have reviewed the online information, and the DVD's and still don't see a full blown manual (PDF file format or otherwise).  If all you get is the
    Using Adobe Premiere Elements 9
    Getting started with Adobe Premiere Elements
    Adobe Premiere Elements workspace
    Projects
    Capturing video
    , etc links
    Then you ain't getting much information.

  • Best laptop for Premiere Elements

    Can you recommend a laptop for Premiere Elements.
    I have PE9 and thinking about PE10.
    Preferably matte screen.
    UK based so Sager not really an option.
    Thanks

    Laptops are never best for video editing, since they're usually built for portability rather than power. They also cost about 50% more than desktops for the same amount of power.
    But what type of camcorder is your video coming from?
    If you are editign tape-based video, a dual-core processor and 4 gigs of RAM with a 500 gig hard drive should be adequate.
    If you are working with AVCHD video, you should go for a quad core or i7 processor running Windows 7 64-bit.

  • Cannot Install the Raw 7.3 update for Premiere Elements 11 and photoshop Elements

    I get an error message when I try to update the  Raw 7.3 update for Premiere Elements 11 and photoshop Elements. It says to run support adviser which I did, but it says that it could not detect any problems.
    Thanks,
    Ron

    The next step will be to review the installation logs for the cause of the installation failure.  You can find details on how to locate and interpret your installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • How can i get live help for premiere elements 11

    how can i get live help with premiere elements 11

    Click I STILL NEED HELP at this next link for Premiere Elements chat
    -http://helpx.adobe.com/contact.html?product=premiere-elements&topic=activating-my-product- or-serial-number-issues

  • Where do I find more Music Scores for Premiere Elements

    Hi everybody
    Does somebody know if it's possible to download (for free or to buy) more Music Scores for Premiere Elements 12?
    Thanks for answers.

    Thanks John
    I have reviewed the online information, and the DVD's and still don't see a full blown manual (PDF file format or otherwise).  If all you get is the
    Using Adobe Premiere Elements 9
    Getting started with Adobe Premiere Elements
    Adobe Premiere Elements workspace
    Projects
    Capturing video
    , etc links
    Then you ain't getting much information.

  • My PC works OK with dowload, but when I try to make an update for Premiere Elements 9, it says "An error occured during download, quit and retry later"

    My PC works OK with dowload, but when I try to make an update for Premiere Elements 9, it says "An error occured during download, quit and retry later" - What can I do ?

    try a manual update,  http://www.adobe.com/downloads/updates/

  • CPU requirement for Premiere Elements 10?

    Hi there,
    Unfortunately, I think I know the answer to this already, but thought I'd toss this out there to see if anyone has gotten it to work.
    On a Windows XP sp3 PC with a 1.86ghz Core2 6300 CPU with 2gb RAM, I'm unable to install Adobe Premiere Elements 10. When I run setup.exe I get "This installation package is not supported by this processor type. Contact your product vendor."
    The system requirements for Premiere Elements 10 do list a 2ghz CPU with SSe2 support. The Core2 6300 does support SSe2, but runs at 1.86ghz not 2ghz.
    Just haven't seen a program actually refuse to install based on CPU speed before. Guess I've been lucky. But can anyone confirm that the installer actually won't install on a slower processor speed. Not sure what else the error could be than this.
    Thanks in advance,
    Sir_timbit

    I know about the min specs. The reason I'm asking if it really checks the CPU speed is I have a school that *is* running Premiere Elements 10 on the exact same hardware. Same CPU. The only difference is the new version I'm trying to install is the volume license version, part of the Adobe Digital School collection. The school that already has it running is using Premiere Elements 10 with either separate licenses or some other license setup. So it doesn't make sense why it worked but doesn't now.
    Testing today. On my test PC, a Core 2 6300 XPsp3, the setup would start up OK using the non-VL installer, but fail when I tried to use the setup.exe from the new installer. As far as I know the program is the same, but I don't think I can do the XML customizations needed to do a silent installer on the non volume licensed version of Premiere Elements 10. In short, why does one version of PE 10 install but not the other?
    Sir_Timbit

  • I just downloaded and paid for Premiere elements but now want the combined Premiere and Photoshop elements. How do I do this?

    My headline says it all. I would like to turn my Premiere Elements order into the combined Premiere and Photoshop Elements download offer. I have already paid for Premiere Elements but would like to take advantage of the combined offer for only another $40 or so. How do I do this?
    I only downloaded and paid for the Premiere Elements package about two days ago.
    Todd Sauve

    Todd Sauve
    Did you purchase Premiere Elements 13 from Adobe Direct? If so, are you within 30 days of that purchase? If the answer to both of those questions is Yes and it appears to be, then you should explore
    Contact Adobe Chat clicking on the following link
    Contact Customer Care
    Premiere Elements
    Membership, Account, Payment
    Payments, Invoices, Orders
    Chat Panel
    If the link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
    Under the conditions mentioned at the beginning of this reply, I am speculating that Adobe should be able to give you your money back for the Premiere Elements 13, allowing you to purchase Photoshop Elements and Premiere Elements which are sold together, but are still really standalone products. How Adobe opts to do that is at its discretion.
    Best wishes
    ATR

  • User manual for Premiere Elements  4

    Is there a link for a complete user manual for Premiere Elements 4? I found a link for the Photoshop Elements 6 user manual (which was not shipped with 6.0.) Wondering if there's one for Premiere 4

    Lots of tutorials both in written and video format available at
    http://muvipix.com
    Everything you wanted to know about Premiere Elements and more...

Maybe you are looking for

  • Exchange rate difference to be hit to desired GL account

    Dear Experts, While doing material IV the exchange rate is different and bill of entry figure for Exchange rate is different...so the difference is hitting say for ex.GL account A..(Foreign exc var-exp)...But the user wants it to be hit in GL account

  • How to create a "dummy" layer to link other layers to the dummy.

    Here is my problem: I have a bunch of Layers, I want to behave the same way (here scaling, but I had also rotation before). My approach (as used formerly with my 3D applications) is to create a "dummy" layer, where the channnels of the other layers a

  • MPB acting weird

    Hello Apple Support Community, I have a late 2011, 13 inch MacBook Pro (technical details shown below). Lately, it has started to act funny in the past couple of weeks. One day, when i had to restart to install software, on the boot screen it was gre

  • How to merge theme and slideshow

    Hello Guys I need your help on how I can merge theme and slideshow. I am trying to save the slideshow to an external hard-drive where i store my movies without having to burn it. The options I have are:SAVING AS DISC IMAGE and SAVING AS VIDEO TS_FOLD

  • Popups are not being blocked and the malware does not stop them. I have gone through the process of troubleshooting.

    I have tried everything from the troubleshooting guide including downloading software for malware. It did not work. The popups come labeled as Firefox and others.