Create Batch Class in Material Master

I need to create the Batch class for n number of materials.
I am using the BAPI BAPI_OBJCL_CHANGE but it is not createing the Class. It says no Batch exists.
There are no Batches created for the Materials which FM or BAPI can be used to create the Batch Class which don't have the Batches.
I tried manually though MM02 it is working like for class 023 Class FERT03 it is createing but not via BAPI BAPI_OBJCL_CHANGE.

Hi Abhishek
I had a simillar isssue last year trying to create an equipment class. I had to finally use bdc.
Why dont u try to use bdc on mm02, or if u 've that much of patience u can debug mm02 to see how its being done in sap.
Best of luck.

Similar Messages

Assign Batch Class to Material - Using Upload

Hi All,
I have a requirement to assign batch class to material master (MM01 / MM02) - Classification view - Batch Class (022).
This assignment has to be done through a upload program (BDC / LSMW / BAPI). Can someone please suggest me the best possible option.
Note:
1. I don't want to assign batch characteristics values. Just wanted to assign batch class to material.
2. I have already created LSMW to load material master using LSMW direct input approach.
Thanks,
Somu

Hi Dev,
My existing LSMW was created using direct input approach which has no option to assign Batch Class to material.
So my thought is to create a separate program (LSMW / BDC / BAPI) to assign batch class to material.
Any best possible option please?
Thanks,
Somu

Automatic batch determination without maintain the class in material master

Hi,
       Is it possible that we can do automatic batch determination with-out maintaining the class in material master.
       My requirement is i want to do batch splitting at PGI level & user dont want to maintain class in material master only they will maintain VCH1.
       if i will maintain class then batch splitting happening at PGI but if i will remove the batch from material master as well as strategy group then splitting not happening.
Regards
Puneet

Hi,
          if any one have solution then pls update
Regards
Puneet
Edited by: puneet rhythm sharma on Dec 7, 2011 6:14 AM

What is procedure for creating new vendor and material master data in ABAP

What is procedure for creating new vendor and material master data in ABAP .

see below code which is used for creation of vendor master as well as extension...
*& Report ZFC_VENDOR_CREATE                                           *
REPORT ZFC_VENDOR_CREATE LINE-SIZE 100
                           NO STANDARD PAGE HEADING
                           MESSAGE-ID ZZ.
                     TABLES
TABLES : SSCRFIELDS.   " Fields on selection screens
                     CONSTANTS
DATA : C_SPLIT TYPE C VALUE '#'. " Used for Has Separator in GUI_UPLAOD
                     TYPES
Int'table to hold Vendor Master Data
TYPES : BEGIN OF TY_VENDOR_MASTER,
          FLAG TYPE C,               " Update Flag
          LIFNR TYPE LIFNR,           " Vendor Number
          BUKRS TYPE BUKRS,           " Company Code
          KTOKK TYPE KTOKK,           " Account Group
          ANRED TYPE ANRED,           " Title
          NAME1 TYPE NAME1_GP,        " Name1
          NAME2 TYPE NAME2_GP,        " Name2
          SORTL TYPE SORTL,           " Search Term 1
          SORT2 TYPE AD_SORT2UL,      " Search Term 2
          STRAS TYPE STRAS_GP,        " Street
          PSTLZ TYPE PSTLZ,           " Postal Code
          ORT01 TYPE ORT01_GP,        " City
          REGIO TYPE REGIO,           " Region
          LAND1 TYPE LAND1_GP,        " Country
          SPRAS TYPE SPRAS,           " Language
          VBUND TYPE RASSC,           " Trading Partner
          BANKS TYPE BANKS,           " Country
          BANKL TYPE BANKK,           " Bank Key
          BANKN TYPE BANKN,           " Bank Account
          BKONT TYPE BKONT,           " Bank Control Key
          BANKA TYPE BANKA,           " Name of Bank
          AKONT TYPE AKONT,           " Reconciliation Account
          FDGRV TYPE FDGRV,           " Cash Management Group
          ZTERM TYPE DZTERM,          " Payment Terms
          REPRF TYPE REPRF,           " Check Double Invoice
          ZWELS TYPE DZWELS,          " Payment Methods
          XPORE TYPE XPORE,           " Pay all items separately
        END   OF TY_VENDOR_MASTER,
Int'table to hold Vendor Extend Data
        BEGIN OF TY_VENDOR_EXTEND,
          FLAG TYPE C,               " Update Flag
          LIFNR     TYPE LIFNR,           " Vendor Number
          BUKRS     TYPE BUKRS,           " Company Code
          KTOKK     TYPE KTOKK,           " Account Group
          REF_LIFNR TYPE LIFNR,           " Reference Vendor Number
          REF_BUKRS TYPE BUKRS,           " Reference Company Code
          AKONT     TYPE AKONT,           " Reconciliation Account
          FDGRV     TYPE FDGRV,           " Cash Management Group
          ZTERM     TYPE DZTERM,          " Payment Terms
          REPRF     TYPE REPRF,           " Check Double Invoice
          ZWELS     TYPE DZWELS,          " Payment Methods
          XPORE TYPE XPORE,           " Pay all items separately
        END   OF TY_VENDOR_EXTEND,
Int'table to hold Error Records Data
        BEGIN OF TY_ERROR,
          MSG(200) TYPE C,                " To hold Message
          LIFNR    TYPE LIFNR,            " Vendor Number
          BUKRS    TYPE BUKRS,            " Company Code
        END   OF TY_ERROR.
                     DATA (Simple Fields)
DATA : W_COUNT TYPE I,               " Variable to hold count of Records
       W_SUCC_REC TYPE I,            " No. of Success Records
       W_SUCC_REC1 TYPE I,           " No. of Updated Records
       W_ERR_REC TYPE I,             " No. of Error Records
       w_noupdate_rec type i.        " No. of Records not Changed
                     INTERNAL TABLES
Int'table to hold uploaded data from File
DATA : IT_VENDOR_MASTER    TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
       WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
       IT_VENDOR_EXTEND    TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
       WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
       WA_IT_BDCDATA       TYPE BDCDATA,
       IT_BDCDATA          TYPE STANDARD TABLE OF BDCDATA,
       WA_IT_MESSTAB       TYPE BDCMSGCOLL,
       IT_MESSTAB          TYPE STANDARD TABLE OF BDCMSGCOLL,
       IT_ERROR            TYPE STANDARD TABLE OF TY_ERROR,
       WA_IT_ERROR         TYPE TY_ERROR,
       it_error_fk01       type standard table of ty_error,
       wa_it_error_fk01    type ty_error,
       it_error_fk02       type standard table of ty_error,
       wa_it_error_fk02    type ty_error,
       it_succ_rec1        type standard table of ty_error,
       wa_it_succ_rec1     type ty_error,
       it_noupdate         type standard table of ty_error,
       wa_it_noupdate      type ty_error.
                     FLAGS
DATA : FL_FLAG1 TYPE C,          " Flag to check error upload file
       FL_FLAG2 TYPE C,          " Flag to hold value
       FL_FLAG3 TYPE C,          " Flag to hold value
       FL_FLAG4 TYPE C.          " Flag to hold value
                     SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-001,
            POSITION POS_LOW.
PARAMETERS :       P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-002,
            POSITION POS_LOW.
PARAMETERS :       P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-003,
            POSITION POS_LOW.
PARAMETERS :       P_VENEXT RADIOBUTTON GROUP R1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-004,
            POSITION POS_LOW.
PARAMETERS :       P_MODE(1) DEFAULT 'N'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-005,
            POSITION POS_LOW.
PARAMETERS :       P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-016,
            POSITION POS_LOW.
PARAMETERS :       P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
                     AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Form to get file path for upload of data
PERFORM GET_FILE_PATH.
AT SELECTION-SCREEN ON BLOCK B1.
Form to Validate data specified on Selection Screen
CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
PERFORM VALIDATE_DATA.
                     START - OF - SELECTION
START-OF-SELECTION.
IF P_VENMAS = 'X'.
Form to upload data from Presentation Server for Vendor Master
    PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
    IF FL_FLAG1 NE 'X'.
      SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
      DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
                              AND   BUKRS = ' '
                              AND   KTOKK = ' '.
Form to process data for Vendor Master
      PERFORM INSERT_VENDOR_MASTER_DATA.
    ENDIF.
ELSEIF P_VENEXT = 'X'.
Form to upload data from Presentation Server for Vendor Extend
    PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
    IF FL_FLAG1 NE 'X'.
      SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
      DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
                              AND   BUKRS = ' '
                              AND   KTOKK = ' '.
Form to process data for Vendor Master
      PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
    ENDIF.
ENDIF.
                     END - OF - SELECTION
END-OF-SELECTION.
IF FL_FLAG1 NE 'X'.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O01.           " Total Number of records read :
    FORMAT COLOR OFF.
    WRITE:40 W_COUNT.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O02.           " Total Number of Success records :
    FORMAT COLOR OFF.
    WRITE:40 W_SUCC_REC.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O07.           " Total Number of Updated records :
    FORMAT COLOR OFF.
    WRITE:40 W_SUCC_REC1.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O08.           " Total Number of Unchanged records :
    FORMAT COLOR OFF.
    WRITE:40 W_noupdate_REC.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O03.           " Total Number of Error records :
    FORMAT COLOR OFF.
    WRITE:40 W_ERR_REC.
    if not it_succ_rec1 is initial.
      skip 1.
      perform display_changed_report.
    endif.
    if not it_noupdate is initial.
      skip 1.
      perform display_nochange_report.
    endif.
    IF NOT IT_ERROR IS INITIAL.
      SKIP 3.
Form to display error data
      PERFORM DISPLAY_ERROR_REPORT.
    ENDIF.
    IF FL_FLAG2 = 'X'.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/2 TEXT-O04.        " BDC Session Name for Creation (FK01) :
      FORMAT COLOR OFF.
      WRITE:40 P_GROUP.
      perform display_error_report_fk01.
    ENDIF.
    IF FL_FLAG3 = 'X'.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/2 TEXT-O09.        " BDC Session Name for Updation (FK02) :
      FORMAT COLOR OFF.
      WRITE:40 P_GROUP1.
      perform display_error_report_fk02.
    ENDIF.
ENDIF.
*&      Form GET_FILE_PATH
This form is used to get the specified path for uploading of data from
flat file with the help of F4 function key
FORM GET_FILE_PATH .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = ' '
    IMPORTING
      FILE_NAME     = P_FILE.
ENDFORM.                    " GET_FILE_PATH
*&      Form VALIDATE_DATA
This form is used to validate the data given by user on the Selection
Screen and the appropriate message is been displayed when an wrong
entry is inputted
FORM VALIDATE_DATA .
IF SY-BATCH EQ 'X'.
    CLEAR SSCRFIELDS-UCOMM.
    MESSAGE E001(ZZ) WITH TEXT-011.
    " Excel file not to be used in Batch Mode
ENDIF.
IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
    MESSAGE E001(ZZ) WITH TEXT-012.
    " Session Mode should be either A or N or E
ENDIF.
ENDFORM.                    " VALIDATE_DATA
*&      Form UPLOAD_DATA
This form is used to upload data from Presentation Server for either
Vendor Master or Vendor Extend
FORM UPLOAD_DATA TABLES P_IT_VENDOR.
DATA : L_FILENAME TYPE STRING,
         L_FILETYPE TYPE CHAR10 VALUE 'ASC',
         L_HEADER_LENGTH TYPE I VALUE 0,
         L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
MOVE P_FILE TO L_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = L_FILENAME
      FILETYPE                = L_FILETYPE
      HEADER_LENGTH           = L_HEADER_LENGTH
      READ_BY_LINE            = L_READ_BY_LINE
      HAS_FIELD_SEPARATOR     = C_SPLIT
    TABLES
      DATA_TAB                = P_IT_VENDOR
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
IF SY-SUBRC <> 0.
   MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    FL_FLAG1 = 'X'.
ELSEIF P_IT_VENDOR[] IS INITIAL.
    MESSAGE I001(ZZ) WITH TEXT-014.   " Uploaded File contains no data
    FL_FLAG1 = 'X'.
ENDIF.
ENDFORM.                    " UPLOAD_DATA
*&      Form INSERT_VENDOR_MASTER_DATA
This form is used to process BDC data for Vendor Master
FORM INSERT_VENDOR_MASTER_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR.
sort it_vendor_master by flag.
LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
    W_COUNT = W_COUNT + 1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = WA_IT_VENDOR_MASTER-LIFNR
      IMPORTING
        OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
    if wa_it_vendor_master-flag = 'A'.
    SELECT SINGLE LIFNR
           FROM LFB1
           INTO L_LIFNR
           WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
           AND   BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    IF SY-SUBRC EQ 0.
      WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
      WA_IT_ERROR-MSG   = TEXT-015.
      APPEND WA_IT_ERROR TO IT_ERROR.
      W_ERR_REC = W_ERR_REC + 1.
      CLEAR : WA_IT_ERROR, L_LIFNR.
    ELSE.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_MASTER.
      PERFORM CALL_TRANSACTION.
    ENDIF.
    CLEAR : WA_IT_VENDOR_MASTER.
    elseif wa_it_vendor_master-flag = 'C'.
      IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
        PERFORM CLOSE_BDC_SESSION.
        fl_flag4 = 'X'.
      ENDIF.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_MASTER.
      PERFORM CALL_TRANSACTION_FK02.
      CLEAR : WA_IT_VENDOR_MASTER.
    elseif wa_it_vendor_master-flag = 'N'.
      WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
      WA_IT_noupdate-MSG   = TEXT-018.
      APPEND WA_IT_noupdate TO IT_noupdate.
      W_noupdate_REC = W_noupdate_REC + 1.
      CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
    endif.
ENDLOOP.
IF FL_FLAG3 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM.                    " INSERT_VENDOR_MASTER_DATA
*&      Form POPULATE_BDC_DATA_VEN_MASTER
This form is used to populate BDC data of Vendor Master
FORM POPULATE_BDC_DATA_VEN_MASTER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_IT_VENDOR_MASTER-ZTERM
    IMPORTING
      OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
    WA_IT_VENDOR_MASTER-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
    WA_IT_VENDOR_MASTER-XPORE = 'X'.
ENDIF.
if wa_it_vendor_master-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
           BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_master-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
           BDC_FIELD USING 'BDC_OKCODE' '=MALL',
           BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-D0110' 'X',
           BDC_FIELD USING 'RF02K-D0120' 'X',
           BDC_FIELD USING 'RF02K-D0130' 'X',
           BDC_FIELD USING 'RF02K-D0210' 'X',
           BDC_FIELD USING 'RF02K-D0215' 'X',
           BDC_FIELD USING 'RF02K-D0220' 'X',
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
           BDC_FIELD USING 'LFA1-ANRED' WA_IT_VENDOR_MASTER-ANRED,
           BDC_FIELD USING 'LFA1-NAME1' WA_IT_VENDOR_MASTER-NAME1,
           BDC_FIELD USING 'LFA1-NAME2' WA_IT_VENDOR_MASTER-NAME2,
           BDC_FIELD USING 'LFA1-SORTL' WA_IT_VENDOR_MASTER-SORTL,
           BDC_FIELD USING 'LFA1-STRAS' WA_IT_VENDOR_MASTER-STRAS,
           BDC_FIELD USING 'LFA1-ORT01' WA_IT_VENDOR_MASTER-ORT01,
           BDC_FIELD USING 'LFA1-PSTLZ' WA_IT_VENDOR_MASTER-PSTLZ,
           BDC_FIELD USING 'LFA1-LAND1' WA_IT_VENDOR_MASTER-LAND1,
           BDC_FIELD USING 'LFA1-REGIO' WA_IT_VENDOR_MASTER-REGIO,
           BDC_FIELD USING 'LFA1-SPRAS' WA_IT_VENDOR_MASTER-SPRAS,
           BDC_FIELD USING 'BDC_OKCODE' '/00',
           BDC_DYNPRO USING 'SAPMF02K' '0120',
           BDC_FIELD USING 'LFA1-VBUND' WA_IT_VENDOR_MASTER-VBUND,
           BDC_FIELD USING 'BDC_OKCODE' '/00',
           BDC_DYNPRO USING 'SAPMF02K' '0130',
           BDC_FIELD USING 'LFBK-BANKS(01)' WA_IT_VENDOR_MASTER-BANKS,
           BDC_FIELD USING 'LFBK-BANKL(01)' WA_IT_VENDOR_MASTER-BANKL,
           BDC_FIELD USING 'LFBK-BANKN(01)' WA_IT_VENDOR_MASTER-BANKN,
           BDC_FIELD USING 'BDC_OKCODE' '=BANK',
           BDC_DYNPRO USING 'SAPLBANK' '0100',
           BDC_FIELD USING 'BNKA-BANKA' WA_IT_VENDOR_MASTER-BANKA,
           BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
           BDC_DYNPRO USING 'SAPMF02K' '0130',
           BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
           BDC_DYNPRO USING 'SAPMF02K' '0210',
           BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_MASTER-AKONT,
           BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_MASTER-FDGRV,
           BDC_FIELD USING 'BDC_OKCODE' '=/00',
           BDC_DYNPRO USING 'SAPMF02K' '0215',
           BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_MASTER-ZTERM,
           BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_MASTER-REPRF,
           BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_MASTER-ZWELS,
           BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_MASTER-XPORE,
           BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM.                    " POPULATE_BDC_DATA_VEN_MASTER
*&      Form BDC_DYNPRO
This form is used to move data to BDCDATA int'table
FORM BDC_DYNPRO USING PROGRAM TYPE BDC_PROG
                       DYNPRO TYPE BDC_DYNR.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-PROGRAM = PROGRAM.
WA_IT_BDCDATA-DYNPRO   = DYNPRO.
WA_IT_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM.                    " BDC_DYNPRO
*&      Form BDC_FIELD
This form is used to move data to BDCDATA int'table
FORM BDC_FIELD USING FNAM TYPE ANY
                      FVAL TYPE ANY.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-FNAM = FNAM.
WA_IT_BDCDATA-FVAL = FVAL.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM.                    " BDC_FIELD
*&      Form CALL_TRANSACTION
This form is used to Call FK01 for processing of data either for
Vendor Master or Vendor Extend. The error records are inserted to
Session which can be processed using SM35
FORM CALL_TRANSACTION .
DATA : L_OPTION TYPE CTU_PARAMS,
         L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01'
       USING IT_BDCDATA
       MESSAGES INTO IT_MESSTAB
       OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
    W_SUCC_REC = W_SUCC_REC + 1.
ELSE.
    IF FL_FLAG2 NE 'X'.
      PERFORM OPEN_BDC_SESSION.
      FL_FLAG2 = 'X'.
    ENDIF.
    PERFORM BDC_INSERT.
    W_ERR_REC = W_ERR_REC + 1.
    PERFORM ERROR_RECORD_DATA.
ENDIF.
ENDFORM.                    " CALL_TRANSACTION
*&      Form OPEN_BDC_SESSION
Form used to open session for Error out Records
FORM OPEN_BDC_SESSION .
DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
         L_GROUP TYPE APQ_GRPN.       " Variable to hold value
MOVE P_GROUP TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT              = SY-MANDT
      GROUP               = L_GROUP
      KEEP                = SPACE
      USER                = L_USERID
    EXCEPTIONS
      CLIENT_INVALID      = 1
      DESTINATION_INVALID = 2
      GROUP_INVALID       = 3
      GROUP_IS_LOCKED     = 4
      HOLDDATE_INVALID    = 5
      INTERNAL_ERROR      = 6
      QUEUE_ERROR         = 7
      RUNNING             = 8
      SYSTEM_LOCK_ERROR   = 9
      USER_INVALID        = 10
      OTHERS              = 11.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-008.              " Unable to open BDC Session
ENDIF.
ENDFORM.                    " OPEN_BDC_SESSION
*&      Form BDC_INSERT
This form is used to insert error records to a Session method
FORM BDC_INSERT .
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE            = 'FK01'
    TABLES
      DYNPROTAB        = IT_BDCDATA
    EXCEPTIONS
      INTERNAL_ERROR   = 1
      NOT_OPEN         = 2
      QUEUE_ERROR      = 3
      TCODE_INVALID    = 4
      PRINTING_INVALID = 5
      POSTING_INVALID = 6
      OTHERS           = 7.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
ENDIF.
ENDFORM.                    " BDC_INSERT
*&      Form ERROR_RECORD_DATA
This form is used to process the messages for the error records which
will be displayed on the output report
FORM ERROR_RECORD_DATA .
DATA : L_LINES TYPE I,
         L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
    CLEAR L_MSG.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = WA_IT_MESSTAB-MSGID
        LANG      = SY-LANGU
        NO        = WA_IT_MESSTAB-MSGNR
        V1        = WA_IT_MESSTAB-MSGV1
        V2        = WA_IT_MESSTAB-MSGV2
        V3        = WA_IT_MESSTAB-MSGV3
        V4        = WA_IT_MESSTAB-MSGV4
      IMPORTING
        MSG       = L_MSG
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
      WA_IT_ERROR_fk01-MSG = L_MSG.
    ENDIF.
    IF P_VENMAS = 'X'.
      WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
    CLEAR WA_IT_ERROR_fk01.
ENDIF.
ENDFORM.                    " ERROR_RECORD_DATA
*&      Form CLOSE_BDC_SESSION
Form used to close session of the Error Records
FORM CLOSE_BDC_SESSION .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-010.             " Unable to Close BDC Session
ENDIF.
ENDFORM.                    " CLOSE_BDC_SESSION
*&      Form CHK_AND_INS_VENDOR_EXTEND_DATA
This form is used to process BDC data for Vendor Extend
FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR, fl_flag4.
sort it_vendor_extend by flag.
LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
    W_COUNT = W_COUNT + 1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR
      IMPORTING
        OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
    if wa_it_vendor_extend-flag = 'A'.
    SELECT SINGLE LIFNR
           FROM LFB1
           INTO L_LIFNR
           WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
           AND   BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
    IF SY-SUBRC NE 0.
      WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
      WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
      WA_IT_ERROR-MSG   = TEXT-007.
      APPEND WA_IT_ERROR TO IT_ERROR.
      W_ERR_REC = W_ERR_REC + 1.
      CLEAR : WA_IT_ERROR, L_LIFNR.
    ELSE.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          INPUT = WA_IT_VENDOR_EXTEND-LIFNR
        IMPORTING
          OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
      SELECT SINGLE LIFNR
             FROM LFB1
             INTO L_LIFNR
             WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
             AND   BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
      IF SY-SUBRC EQ 0.
        WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
        WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
        WA_IT_ERROR-MSG   = TEXT-015.
        APPEND WA_IT_ERROR TO IT_ERROR.
        W_ERR_REC = W_ERR_REC + 1.
        CLEAR : WA_IT_ERROR, L_LIFNR.
      ELSE.
        REFRESH IT_BDCDATA.
        CLEAR IT_BDCDATA.
        PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
        PERFORM CALL_TRANSACTION.
      ENDIF.
    ENDIF.
    CLEAR : WA_IT_VENDOR_EXTEND.
    elseif wa_it_vendor_extend-flag = 'C'.
      IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
        PERFORM CLOSE_BDC_SESSION.
        fl_flag4 = 'X'.
      ENDIF.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_extend.
      PERFORM CALL_TRANSACTION_FK02.
       CLEAR : WA_IT_VENDOR_EXTEND.
    elseif wa_it_vendor_extend-flag = 'N'.
      WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
      WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
      WA_IT_noupdate-MSG   = TEXT-019.
      APPEND WA_IT_noupdate TO IT_noupdate.
      W_noupdate_REC = W_noupdate_REC + 1.
      CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
    endif.
ENDLOOP.
IF FL_FLAG2 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
if fl_flag3 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM.                    " CHK_AND_INS_VENDOR_EXTEND_DATA
*&      Form POPULATE_BDC_DATA_VEN_EXTEND
This form is used to populate BDC data of Vendor Extend
FORM POPULATE_BDC_DATA_VEN_EXTEND .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_IT_VENDOR_EXTEND-ZTERM
    IMPORTING
      OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
    WA_IT_VENDOR_EXTEND-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_extend-XPORE = 'Y'.
    WA_IT_VENDOR_extend-XPORE = 'X'.
ENDIF.
if wa_it_vendor_extend-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
           BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
           BDC_FIELD USING 'RF02K-REF_LIFNR'
                                      WA_IT_VENDOR_EXTEND-REF_LIFNR,
           BDC_FIELD USING 'RF02K-REF_BUKRS'
                                      WA_IT_VENDOR_EXTEND-REF_BUKRS,
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_extend-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
           BDC_FIELD USING 'RF02K-D0210' 'X',
           BDC_FIELD USING 'RF02K-D0215' 'X',
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
           BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_EXTEND-AKONT,
           BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_EXTEND-FDGRV,
           BDC_FIELD USING 'BDC_OKCODE' '=/00',
           BDC_DYNPRO USING 'SAPMF02K' '0215',
           BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_EXTEND-ZTERM,
           BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_EXTEND-REPRF,
           BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_EXTEND-ZWELS,
           BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_extend-XPORE,
           BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM.                    " POPULATE_BDC_DATA_VEN_EXTEND
*&      Form DISPLAY_ERROR_REPORT
This form is used to display the error records on the output screen
FORM DISPLAY_ERROR_REPORT .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O05.            " Error List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O06.            " Error List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H03,              " Error Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR INTO WA_IT_ERROR.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_ERROR-LIFNR,
           17 SY-VLINE,
           18 WA_IT_ERROR-BUKRS,
           31 SY-VLINE,
           32 WA_IT_ERROR-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_ERROR.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
ENDFORM.                    " DISPLAY_ERROR_REPORT
*&      Form CALL_TRANSACTION_FK02
Form used to Call Transaction FK02
form CALL_TRANSACTION_FK02 .
DATA : L_OPTION TYPE CTU_PARAMS,
         L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK02'
       USING IT_BDCDATA
       MESSAGES INTO IT_MESSTAB
       OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
    W_SUCC_REC1 = W_SUCC_REC1 + 1.
    WA_IT_succ_rec1-MSG = Text-017.
    IF P_VENMAS = 'X'.
      WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
ELSE.
    IF FL_FLAG3 NE 'X'.
      PERFORM OPEN_BDC_SESSION_fk02.
      FL_FLAG3 = 'X'.
    ENDIF.
    PERFORM BDC_INSERT_fk02.
    W_ERR_REC = W_ERR_REC + 1.
    PERFORM ERROR_RECORD_DATA1.
ENDIF.
endform.                    " CALL_TRANSACTION_FK02
*&      Form OPEN_BDC_SESSION_fk02
Form used to Open session for FK02
form OPEN_BDC_SESSION_fk02 .
DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
         L_GROUP TYPE APQ_GRPN.       " Variable to hold value
MOVE P_GROUP1 TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT              = SY-MANDT
      GROUP               = L_GROUP
      KEEP                = SPACE
      USER                = L_USERID
    EXCEPTIONS
      CLIENT_INVALID      = 1
      DESTINATION_INVALID = 2
      GROUP_INVALID       = 3
      GROUP_IS_LOCKED     = 4
      HOLDDATE_INVALID    = 5
      INTERNAL_ERROR      = 6
      QUEUE_ERROR         = 7
      RUNNING             = 8
      SYSTEM_LOCK_ERROR   = 9
      USER_INVALID        = 10
      OTHERS              = 11.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-008.              " Unable to open BDC Session
ENDIF.
endform.                    " OPEN_BDC_SESSION_fk02
*&      Form BDC_INSERT_fk02
Form used to insert data into BDC session using FK02
form BDC_INSERT_fk02 .
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE            = 'FK02'
    TABLES
      DYNPROTAB        = IT_BDCDATA
    EXCEPTIONS
      INTERNAL_ERROR   = 1
      NOT_OPEN         = 2
      QUEUE_ERROR      = 3
      TCODE_INVALID    = 4
      PRINTING_INVALID = 5
      POSTING_INVALID = 6
      OTHERS           = 7.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
ENDIF.
endform.                    " BDC_INSERT_fk02
*&      Form display_changed_report
Form to display Updated Vendor data
form display_changed_report .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O10.          " Updated List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O11.          " Updated List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_succ_rec1-LIFNR,
           17 SY-VLINE,
           18 WA_IT_succ_rec1-BUKRS,
           31 SY-VLINE,
           32 WA_IT_succ_rec1-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_succ_rec1.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_changed_report
*&      Form display_nochange_report
Form to display No Changed data for Vendors
form display_nochange_report .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O12.       " No Changes List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O13.       " No Changes List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_noupdate INTO WA_IT_noupdate.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_noupdate-LIFNR,
           17 SY-VLINE,
           18 WA_IT_noupdate-BUKRS,
           31 SY-VLINE,
           32 WA_IT_noupdate-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_noupdate.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_nochange_report
*&      Form ERROR_RECORD_DATA1
Form to get Error Message for Changed Vendors
form ERROR_RECORD_DATA1 .
DATA : L_LINES TYPE I,
         L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
    CLEAR L_MSG.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = WA_IT_MESSTAB-MSGID
        LANG      = SY-LANGU
        NO        = WA_IT_MESSTAB-MSGNR
        V1        = WA_IT_MESSTAB-MSGV1
        V2        = WA_IT_MESSTAB-MSGV2
        V3        = WA_IT_MESSTAB-MSGV3
        V4        = WA_IT_MESSTAB-MSGV4
      IMPORTING
        MSG       = L_MSG
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
      WA_IT_ERROR_fk02-MSG = L_MSG.
    ENDIF.
    IF P_VENMAS = 'X'.
      WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
    CLEAR WA_IT_ERROR_fk02.
ENDIF.
endform.                    " ERROR_RECORD_DATA1
*&      Form display_error_report_fk01
Form to display Error Report for Master Vendors (FK01)
form display_error_report_fk01 .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O05.     " Error List for Vendor Master (FK01)
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O06.     " Error List for Vendor Master Extended (FK01)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_ERROR_fk01-LIFNR,
           17 SY-VLINE,
           18 WA_IT_ERROR_fk01-BUKRS,
           31 SY-VLINE,
           32 WA_IT_ERROR_fk01-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_ERROR_fk01.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_error_report_fk01
*&      Form display_error_report_fk02
Form to display Error Report for changed Vendors (FK02)
form display_error_report_fk02 .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O14.     " Error List for Vendor Master (FK02)
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O15.     " Error List for Vendor Master Extended (FK02)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number

How to change Valuation class in material master(have stock)

HI,
I would like to change the valuation class in material master, How to change VC? is there any process before changing VC?
I heared when Material have nil stock then only it's possible to change VC, Is it correct? which TC can I use for change VC?
Regards,
venki

Dear venki,
To change Valuation class you must have zero stock in the current period, and zero stock at the end of the last period, plus no open PO lines . flag for deletion all open PO lines,
Regards
shankar

How to Change Batch Classification of material master

Hi,
How to Change Batch Classification of material master in a production system,Pl note that there is no stock and no open qty still system is not allowing me to delete the old Classification and add my new classification.
Guys any solution for this.
Thanks in advance
rgds
bijaya pradhan

I believe there is a FM VB_CHANGE_BATCH for this, any body tried this FM?

Creating MDM repository for Material Master Data

Hello MDM Gurus,
I am new to SAP MDM. I want to create MDM repository for Material Master. What I unddertand is, I can create repository using Bussiness Content shiped with MDM software. I will copy *.a2a file to archive folder of MDM server and unarchive repository. I have following question for you.
1. HOw do I use export maps and import maps which I found in Busines contenst\Material folder?
2. How do I use MDM Lookup Tables which is xml document in Busines contenst\Material folder?
3. Why is the use of MDMGX_55520_Material.txt file which I found in Busines contenst\Material folder?
4. What is the use of *.xsd files and how can I use them?
Thanks,
Bhupesh

Hi Bhupesh
1. HOw do I use export maps and import maps which I found in Busines contenst\Material folder?
save all the map files on your loacl machine. open import manager and select file-> Import, browse to the .map file and save the map with a meaningful name. now next time connect to the source file you want to import and OPEN the map saved.
2. How do I use MDM Lookup Tables which is xml document in Busines contenst\Material folder?
Businees content contains the standard ECC refernce tables like countries, regions etc which can be refreshed from ECC. for this you have to configure MDMGX, defining all the ports in MDM and in ECC the tables from which data has to be refreshed. refer to below threads for details.
Extract Data usnig MDMGX
How to Export Materials from ERP to MDM 7.1 via MDMGX?
3. Why is the use of MDMGX_55520_Material.txt file which I found in Busines contenst\Material folder?
This helps us in configuring the table extraction from ECC, refer to thread-> Extract Data usnig MDMGX
4. What is the use of *.xsd files and how can I use them?
Schema files are used for syndicating the records from MDM to source system. Say we want to syndicate material master from MDM to ECC and in ECC they will be posted via MATMAS05 IDoc. these schemas are the structure of IDoc which will contain the values which will be syndicated from MDM.
Let me know if you know some more details.
regards
Ravi

LSMW no create MRP flaps in Material Master

Hello, I created a LSMW for Material Master. The material is created but the tabs are displayed MRP or Accounting. You do not know what else to try. Help please.
Arturito.

Hi,
Have you set the parameters XEID1, XEIB1 to 'X' to enter the values.
For the MRP view, SAP would require plant, storage location, MRP area etc.
For Accounting view, SAP would require valuation type,
Check if you have provided in your LSMW.
Hope it helps,
Sujay

How to assign multiple batch class to material in classification view

Dear Gurus,
How to assign multiple batch class to material in classification view.
plz explain what are the procedure and what are the configuration required before assignment.
Thanks
Mani

OK, Thanks for your reply.
Regards
Mani

Activation of Batch Characteristics in Material Master

Dear Gurus
In Material Master the character values are in grey mode and not allowing to select.can anyone suggest how to activate this.
other characters are in Blue colour.
Thnk in Advance
MK

Hi There
In material master you can assign the class in the classification view, it will provide the characteristics, that will flow when you do the receipt there you can enter the values or Create Batch-MSC1n and Change batch MSC2n, you can enter the characteristics values,,
I dont have clue why you are trying to enter the values in material master,,,
In CL02- Create the class and assign the characteristics (Create the Charac T code CT04)
Provide more details to check further,,,
Thanks
Senthil

Need to activate batch mangement in material master

Hi MM Experts,
Need your all help in the below issue
We need to select batch management for the material code but system will not allow selecting in material master, as per SAP note 30656; we removed complete stock from the same plant but some previous month stock exist for that we posted stock in current month using 561 movement and while reversing the stock in previous month posting date system not allowing to reveres getting an standard and moving price error message because they changed material price control from Moving to standard price in the current month.
Now the current situation is system not allowing reversing the stock due to moving and standard price control change Please suggest us, what are the steps we need to carry out to flag batch management for that material code.

Hi Jorgen,
The complete steps mentioned for that material.
1.Raw Material code created previousely (In the month of FEB 2011)with price control (V) withought batch management
2.In the month of Mrach 2011 Price control changed from V to S
2,In the month FEB 2011 some Good movement document posted for the same material.
3.From the month of March 2011 now they want to actiavte batch management for the same material
4.We sujjested user to make nill stock for that material and activate the batch management.
5.Then they removed the complete stock for the same material evn they getting some previous stock error.
6.then we find out the note in sap 30656 and advised below steps.
1. Post the same amount to current period stock (for example, using movement type 561) so that previous period stock and current period stock are identical.
2. Make a withdrawal posting in the previous period for the stock together with posting date (for example, using movement type 562).
7.while doing second step we are getting an error as price control changed from V TO S,due to changed in price control
Please let me know if,you need any additonal Information
Regards
Dilipkumar

Different GL Account for WRX - based on Valuation Class (No Material Master

Hi Gurus,
My scenario is as given below.
1. We do not have any Material Master. We create short text PO's with account assignment category "P".
2. We are also using Material Group in our PO. We have one Material Group for Domestic Purchases (say M1) and another Material Group (say M2) for Import Purchases.
3. We have assigned valuation class say 3100 for Material Group M1 and valuation class 3101 for Material Group M2.
4. Our plant is say RBUP and our valuation grouping code is say 0001 which is assigned to the same plant.
Objective:
While doing MIGO we want to have different GR/IR Account for domestic purchases say 108 and different GR/IR account for import purchases say 109.
Issue:
1. In OBYC setting GR/IR account is picked from transaction key WRX.
2. Our entries in WRX are as given below for our Chart Of Accounts say DMN.
Valuation Modifier Valuation Class GL Account
0001 108
0001 3100 108
0001 3101 109
3. But even when i am creating the PO with Material Group M2, it is not picking the GR/IR account 109, based on the valuation class i.e. 3101 which is assigned to the Material Group M2.
Query:
1. How can I achieve my objective of selecting GR/IR Account 109 for Import PO's and GR/IR Account 108 for Domestic PO's.
Pl note we will not be maintain material master.
Will give full 10 points if anyone can help me reslove this issue.
Pl also do not waste any of your valuable time to address the account assignments for BSX or GBB-VBR. I am fully aware that in VBR this differentiation is possible.
Rgds,
Prasad.

I suggest you to create a Dummy Materials. Lets say,
material number: 1001
enter material description as Domestic
material number: 1002
enter material description as Imports
and in OBYC for GBB
make the following settings:
val grp      gen mod    val cla      gl a/c dr     gl a/c cr
0001     VBR     4000     74180040     74180040
0001     VBR     4001     78020091     78020091
so that when u create PO u can get default GL (consumption GL ) for the material (u can use the same for material group also) and u can maintain WRX acc determination as follows ..
val grp   val cla    gl a/c dr   gl a/c cr
0001      4000     123456     123456
0001      4001     456789     456789
Thus u need to create 2 different valuation class for these material group specific and in PO while entering the text u can add the text which is displayed along with material description
hope this helps

How to get Valuation class in Material master?

Dear all,
I want to have valuation class in my report and i want to take is as a material attribute.Actually i have check all the attribute of material master but valuation class is not there. i am having valuation class as a master data as individual . How can i get the valuation type in the Material master?I need it in Material master only.
Regards,
Macwan James

Dear venki,
To change Valuation class you must have zero stock in the current period, and zero stock at the end of the last period, plus no open PO lines . flag for deletion all open PO lines,
Regards
shankar

Use of Standard Class in Material Master classification

Hello Experts,
Can you please explain me the significance of 'Standard Class' option in classification view of material master?
When I click on F1 it gives following info (which I can't understands completely)
A standard class allows you to access all the information on classification and characteristics for an object when you use the object, without having to select one of the classes it is assigned to.
Can you please elaborate more on this?
Thanks in advance,
Vijay.

Hi Anamika,
Thanks for your feedback.
Actually my question is why there is option of 'Standard Class' provided in classification view. If multiple classes are assigned to given material then we can select only one class as a standard class. What is the use of selecting a class as a standard class??
Thanks in advance,
Vijay.

Valuation class of material master to be changed

Hello,
My master data team has insereted a wrong valuation class in the material master record. Purchase order has been raised and a GR has been done for the same. SAP gives following steps to change the valuation class:
The valuation class cannot be changed, choose 'Display error'
Message no. M3368
"Diagnosis
You wanted to change the valuation class. However, this is not possible because one or more of the following already exist for the material:
Valuated stocks in the current period or in the previous period
Open purchase orders or delivery schedule lines
Production orders for which a goods movement has already taken place
System response
Your change is reset by the system.
Procedure
If valuated stocks already exist, you can change the valuation class only as follows:
a) Post the stocks of the material to an interim account.
b) Change the valuation class in the material master record.
c) Post the stocks of the material back to their original account.
If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to Deleted."
My question is how do I post the stocks to an interim account since stock accounts are configured to post automatically?
If anyone knows how to manage the posting, please let me know.
Thanks
Keyur

Hi,
Make the movement with a movement type in MIGO that posts to the same account in FI for all Valuation classes.
After changing the Val. CLass then reverse the above movement.
Kind regards

Create Batch Class in Material Master

Similar Messages

Maybe you are looking for