Create Business Partner - Dump

Dear All,
When I try to create business partner with transaction code BP, I got ABAP Programming Error, The ASSERT condition was violated.
I use SAP standard business partner role UKM000. When I click credit profile tab, I get this dump. What may be the reason?
BR

Hi London,
Firstly have you created the BP in General Role?
Then you have tried to create it in UKM000 role?
Also please check ST22... ASSERT condition can be because of different reason, analysis of ST22 message will give you more detail.l

Similar Messages

  • Dump Error while creating Business Partner in FPP1

    Dear Experts,
    I am using the EHP5 IS-U component. I am getting the below dump error, when I am trying to create Business partner in T.Code: FPP1.
    **Error in the ABAP Application Program**
    **The current ABAP program "ISU_BUPA_EVENT_DINP1==========FT" had to be  terminated because it has come across a statement that unfortunately cannot be executed.**
    **The following syntax error occurred in program "SAPLES02 " in include "LES02U14  " in line 30:**
    **"The data object "BUS0DIINIT" does not have a component called "MUSTER_KUN".**
    I have searched SAP notes, but I am unable to find any suitable notes to resolve this issue.
    Could anyone help me to resolve this issue.
    Thanks in Advance,
    Regards,
    Aswin

    Hi,
    Please don't go adding fields. Aren't we talking about SAP-standard structures here?
    Have you actually checked (in transaction SE11) that the structure ISU_EKUNINIT is included in the BUS0DIINIT?
    If it is, and the field MUSTER_KUN is missing, then you should raise an OSS note.
    If the structure is not included, you should also talk to OSS. Your ISU installation might be incomplete?
    cheers
    Paul Bakker

  • ERROR IN CREATING BUSINESS PARTNER ON DOING IT 2ND TIME - SAURAV  LAHIRY

    Hi friends,
                         I a currently using a custoM tcode zib52  to create a business partner in CRM. My problem is that on creating the first time the Busness partner it is getting created. But on pressing it in the change mode and then clicking the create patient button it is giving a short dump. I am using FM BUP_PARTNER_MAINTAIN where i am giving '01' for create.
                                                                       Regards,
                                                                       SAURAV  LAHIRY[error1.htm]

    Hi All,
    Thanks for your quick reply.
    Recently SAP has upgraded support packs and becuse of this dump is occuring. Piece of extra code has got added in existng code. We can not chage / comment that cde as the probe is in Zt-cde. But even if it is custm transaction, any standard includes havebeen used. And in sme of those include, that piece of code has got added.
    Steps - First time business partner is getting created successfully. but when we save it, go back and cick on create business partner than it is going into short dump.
    i had debug the code and found that GUID number is not getting cleared i second time.
    can you please tell me how to clear GUID number? is there any FM / methods? Aso can you tell me hw to refresh/ clear global memory for FM BUP_PARTNER_MAINTAIN?  
    Thanks in advance
    Saurav

  • FM for create Business partner.

    hii,
    i have the following code to create business partner.
    when i execute the code and enter the required data it gets executes successfully but i cannot see the created bp or partner-group or bp role in tcode bp.
    <removed by moderator>
    Moderator message: please post relevant code parts only, stay under 5000 characters total to preserve formatting.
    Edited by: Thomas Zloch on Jan 17, 2011 11:19 AM

    hii gemini,
    i went through the same pdf for creating bp, but when i click on save a short dump is generated.
    which is as follows :
       The current ABAP program "SAPLBUSS" had to be terminated because it has
       come across a statement that unfortunately cannot be executed.
       The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
        include "LCACS_BU_PARTNERU44 " in
       line 19:
       "The key of internal table "LT_BUT0BK" contains components of type "X" "
       "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
       "r such tables in a Unicode context."
       The include has been created and last changed by:
       Created by: "SAP "
       Last changed by: "SAP "
       Error in the ABAP Application Program
       The current ABAP program "SAPLBUSS" had to be terminated because it has
       come across a statement that unfortunately cannot be executed.
    rror analysis
       The following syntax error was found in the program SAPLCACS_BU_PARTNER :
       "The key of internal table "LT_BUT0BK" contains components of type "X" "
       "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
       "r such tables in a Unicode context."
    regards,
    akshay ruia

  • Badi before create Business Partner

    Hello Expert !!!
            when I create Business Partner in transaction BP , I have to add attribute set in tab marketing attributes everytime (depend on role that i create ).
            I want to program for automatic update attribute set .
           Do you know the Badi that i can code in that ? Badi  before create Business Partner?
      please help me
    advance thanks,
    kritamate

    hey everyone !!!!
    this all code in Badi Partner_update :
    method IF_EX_PARTNER_UPDATE~CHANGE_BEFORE_UPDATE .
    FIELD-SYMBOLS: <ls_but000_new> TYPE but000,
                     <ls_but050_new> TYPE but050.
    CONSTANTS: lc_object_type TYPE crmt_prt_otype VALUE 'BUS1006'.
    DATA: lt_changed_object_guids TYPE crmt_ace_object_guid,
            lt_new_object_guids     TYPE crmt_ace_object_guid,
            ls_object               LIKE LINE OF lt_changed_object_guids,
            lt_but000_old           TYPE STANDARD TABLE OF but000,
            lt_but000_new           TYPE STANDARD TABLE OF but000,
            ls_but000_old           LIKE LINE OF lt_but000_old,
            lt_but050_new           TYPE STANDARD TABLE OF but050,
            lt_but050_old           TYPE STANDARD TABLE OF but050,
            ls_but050_old           TYPE but050,
            lv_partner_guid         TYPE bu_partner_guid,
            lt_return               TYPE STANDARD TABLE OF bapiret2,
            lv_tabix                TYPE sy-tabix.
    CLASS cl_bsp_bp_accmod DEFINITION LOAD.
    business partners ************************************************
      CALL FUNCTION 'BUPA_GENERAL_CALLBACK'
        TABLES
          et_but000_old = lt_but000_old
          et_but000_new = lt_but000_new
        EXCEPTIONS
          OTHERS        = 0.
    BP new or changed?
      LOOP AT lt_but000_new ASSIGNING <ls_but000_new>.
        ls_object-object_guid = <ls_but000_new>-partner_guid.
        READ TABLE lt_but000_old INTO ls_but000_old
                   WITH KEY partner = <ls_but000_new>-partner.
      New BP created
        IF sy-subrc NE 0 OR ls_but000_old-client IS INITIAL.
          COLLECT ls_object INTO lt_new_object_guids.
      BP changed
        ELSE.
          COLLECT ls_object INTO lt_changed_object_guids.
        ENDIF.
      ENDLOOP.
    data BP_guid type CRMT_TG_BP_GUID.
    DATA: L_ATTRIBSET TYPE CRMT_PROF_TEMPLATE.
    DATA : LW_VALUE TYPE CRMT_MKTPROF_COMW.
    DATA: T_VALUE TYPE TABLE OF CRMT_MKTPROF_COMW  .
    DATA: T_RETURN  TYPE TABLE OF  BAPIRET2 ,
           LV_BP_PERSON             TYPE  BU_PARTNER.
    CONSTANTS: C_ROLE(5)          VALUE 'ZMROL'.
    L_ATTRIBSET  =  C_ROLE.
    BP_guid = ls_object-object_guid. .
              LW_VALUE-ATNAME = 'ZMRO0001'.
              LW_VALUE-ATWRT = 'Z11'.
              INSERT LW_VALUE INTO TABLE T_VALUE.
    *LV_BP_PERSON = '20001678'."<ls_but000_new>-partner .
    CALL FUNCTION 'CRM_MKTBP_CHANGE_BP'
      EXPORTING
        iv_profile_template_id       = L_ATTRIBSET
       IV_BP_GUID                   = BP_guid
      IV_XDESCR                    = ' '
      IV_FCODE                     = 'C'
      IV_MSA                       = 'X'
      IV_COMMIT                    = 'X'
      IV_PARTNER                   = LV_BP_PERSON
      IV_CONVERT_VALUES            = 'X'
    TABLES
       IT_IMP_SELTAB                = T_VALUE
        ET_RETURN              = T_RETURN.
       if sy-subrc <> 0.
         endif.
    endmethod.
    message Shotdump :
    What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    i don't what happen . Maybe because it cannot use this function in badi . I don't know . if you know ,please help
    advance thanks ,
    kritamate

  • Error while Creating Business partner in FPP1

    Hi,
    I can't create Business partner in standard T.code FPP1 in Test System and getting the following error
    "Application object BUPA: Table EBUPD does not exist".
    Kindly help me in solving this issue.

    Hi Venkatesh
    Please add the message class and message number - in this case R1 149 - next time you post a problem.
    There's probably an issue with your setup with for the Business Partner Screen Layout (area menu BUPT).
    The error is raised, because the EBUPD is not a table assiciated with the Business Parter (Application object BUPA). See transaction BUSG or table TBZ1H. It is in fact a dynpro structure.
    Now there's a table that links the dynpro structure fields to the db table fields, which should translate the structure EBUPD into table EKUN fields: TBZ1C. Technically, this is done in function BUS_DYNFLD_TO_DBFLD_CONVERT and it returns the dynpro structure instead of the DB table if there's no corresponding entry in TBZ1C.
    So please check if you can find following entry in TBZ1C (client dependent):
    OBJAP  DYNPTABNM  DYNPFLDNM  DBTABNM  DBFLDNM
    BUPA   EBUPD      +          EKUN     +
    Or via transaction BUSP - Screen field --> Database Field
    If the entry is missing I suggest you add it.
    Yep
    Jürgen

  • Geocode Error while creating Business Partner in Audit Management

    Hi All,
    When I try to create business partner in PLMD_AUDIT and assign it to various partner roles like Auditor, Responsible person etc. I am getting error as " Geocoder SAP0: Country specification is (Customizing) " What should be done to avoid this error?
    Found details in spro:
    For "SAP0 Geocoder" there is no function module and destination assigned, Is it the cause of error? If it is the case then what should be assigned and Let me know the standard function module.
    Regards,
    Ram.

    hi Keerthi,
    553073 is the sap note for geocode error in country specification.
    Regards,
    Ram.
    Edited by: Ramachandran Jayaraman on Jun 9, 2008 3:18 PM

  • SLG1 error while creating Business Partner

    Hi,
    Im currently working on SRM 7.0 and keep receiving the following errors in SLG1. Can you kindly advise what might be the root cause for the below errors so ican fix the issue and ensure the same error doesnt pop up going further?
    Error type 1:
    Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXX
    The region 00 is not defined for country DE
    Error type 2:
    Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXXX
    The transport zone ZOC0000001 is not defined for country YY
    Error type 3:
    Error:Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXXX
    Email address "whatever email" is invalid
    Appreciate your feedback
    Akshay

    Hello Akshay,
    Resolution for Isuue 1:
    SAP Web Application Server -> General Settings -> Set Countries -> Insert Regions or Define Country Codes
    Region for country DE is not maintained in SPRO or bad data.
    Resolution for Issue 2:
    SAP Web Application Server - Application Server - Basis Services - Address Management - Maintain Transport Zones
    Maintain the transport zones in SRM.
    Resolution for Issue 3:
    email address should be a valid address. SRM checks the format e.g. xx @ yy . zzz
    I believe error could be due to incorrect data.
    Hope this solves.
    Ashutosh

  • Problem in creating business partner

    Hi,
    When we create business partner from customer in RE Classic in Create lease out(T-code FOV1) , system is not copying the address of customer to business partner.
    Thanks in Advance

    Hi,
    Check note:
    Note 681760 - Business partner: No copy of object address
    Regards,
    DAS

  • Error in creating business partner through transaction FPP1 in ECC6.0

    HI,
    We have upgraded our system from 4.7E to ECC6.0.Now when we are trying to create business partner through transaction FPP1 we are getting error as " Exception condition "NO_ACTIVE_TAB" raised."
    Can any one help us in rectifying the error and tell us the possible causes of error.. .??
    Regards,
    Shruti Singh

    Hello,
    Notes  696189 & 618123 may be of some help to you....:)
    Regards
    Olivia

  • How to create Business partner from uploaded file by Function module?

    Hi Experts,
    I have uploaded Business partner data from a file to server now from individual records I have to create Business partner and have to update the records in the tables. Means from on record i have to create one business partner in sap system.
    I have uploaded the records in the system and stored in a internal table.Now my task is to create business partner and have to update tables.
    I need a function module which create BP by each records uploaded and update the respective tables of BP and exports business partner ID.
    Please respond soon Its a requirement form the client.
    Prem.

    HI，
       You can use the bapi 'BAPI_BUPA_CREATE_FROM_DATA' to create a business partner .
    call function 'BAPI_BUPA_CREATE_FROM_DATA'
              exporting
                businesspartnerextern              = g_bpartner-partn
                partnercategory                    = partnercategory
                partnergroup                       = partnegroup
                centraldata                        = centraldata
                centraldataperson                  = centraldataperson
                centraldataorganization            = centraldataorganization
    *       CENTRALDATAGROUP                   =
                addressdata                        = addressdata
    *       DUPLICATE_MESSAGE_TYPE             =
    *         IMPORTING
    *            BUSINESSPARTNER                    = G_BPARTNER-BUSINESSPARTNER
             tables
                telefondata                        = telefondata
                faxdata                            = faxdata
                e_maildata                         = e_maildata
                return                             = return
    *       ADDRESSDUPLICATES                  =
                addressnotes                       = addressnotes.

  • How to create business partner temblet

    Dear friends,
            how to create business partner temblet .
      please send the following mail address
       [email protected]
                      Thangs in advance
    Regards,
    S.Siva

    hi
    Refer to the links below might get u some info
    General Business Partner-initial screen
    http://help.sap.com/erp2005_ehp_02/helpdata/en/39/0b77a9df3011d189fc0000e829fbbd/frameset.htm
    Business partner as Template
    http://help.sap.com/erp2005_ehp_02/helpdata/en/2f/3a2a09969611d2ac750000e829fbfe/frameset.htm
    Business Partner
    http://help.sap.com/erp2005_ehp_02/helpdata/en/43/a0dfe510d825e5e10000000a1553f7/frameset.htm
    Creating or Changing Master data Template
    http://help.sap.com/erp2005_ehp_02/helpdata/en/c7/adcef39296f94e8ef7077ce160200e/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/57/92f63aad7e3014e10000000a11402f/content.htm
    http://b1up.net/index.php?id=modules
    Reward if USeful
    Thanx & Regards.
    Naren..

  • How to Create Business Partner with  fix number in t-code :BP

    Dear SIr,
    Normally I will set number range for auto  to create Business Partner. In case , If we would like to crea How to Create Business Partner with  fix number in t-code :BP , howe to do?
    Please kindly advise.
    THnak you and best regards,
    Vimol

    Dear Shobhit,
    How to put the thread as you mentioned.
    Best regards,

  • How to create Business Partner in CFM

    Hello,
    I want to Know which TCode should be use while creating Business Partner in CFM Module
    Regards
    Reshma

    Dear Reshma,
    Please, use the transaction "BP" in CFM module to create a business partner.
    Regards,
    Paulo

  • How to create business partner in solman

    How to create business partner in solman?...

    Hi,
    Check pages 8 - 11 in this document.
    https://websmp209.sap-ag.de/~sapidb/011000358700001197002005E/Addtional_Information.pdf
    This would solve your problem.
    feel free to revert back.
    --Ragu

Maybe you are looking for