Create button in Device Configuration

Hi ALL
We are not getting the Create, Delete, Copy button in Device Configurations in Mobile Administrator web Console.
Any idea how to get the missing buttons?
Regards
Manish

Hello Manish,
Are you using SAP MI Web console, if so, then with device configurations you can configure mobile devices without being able to access them directly.
1.Start transaction DEVICE_CONFIG.
2.Enter a name for the new device configuration and choose Create.
Note : Device configurations should not have the same name as a mobile component.
3.On the Monitoring Functions tab, enter the required monitoring configurations.
4. On the Assignments tab, enter the role you want to assign to the device configuration and thus to the monitoring functions.
If you want to assign the device templates to individual devices or users instead, you can do so in the SAP MI Web Console. In this case, please refer to below help link -
http://help.sap.com/SAPhelp_nw04/helpdata/en/83/36de50f796484bb8d9d8a4db850ac7/frameset.htm
Thanks and Regards,
Ruchi.

Similar Messages

Getting Error while creating device configuration (Schema Node ref problem)

Hi,
In MDM 2.0.1, I created the following(in order) :
1.UOM
2.Measuring Component Type
3.Device Configuration Type
4.Service Provider
5.Device Type
6.Device
But when trying to Configure the created Device, its showing some error as...
Schema node isNewCase (/schema/[includeDA F1-CommonToDoEntryData]/isNewCase) references non-existent service field NEW_CASE_SW.
After this has happened, i couldn't even add another configuration to some of my Existing Devices..
(But for Some existing devices, adding a new configuration doesn't throwing errors..)
Please help regarding this...

Is the Measuring Component Type u created is added in DeviceType's ConfigType list..?

How can I sync my photo contents in iPhoto on my iMac to my new iPAD's iPhoto? I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but I cannot find "phone button" under Device name on iTunes page. Please help! Thanks!

I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!

It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side :

How to reprint the Device Configuration page?

Im installing my new printer for first time and was parially thru the wireless connection option set up and it printed off the Device Configuration Page but the page was partially blank and now I need the printer IP address to complete the install and set up. how do I find that? where?

Please read this post then provide some details. What printer model?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Skipping system dump : no dump device configured

Hi all!
I am new to Solaris, please understand. I receive the following message "skipping system dump : no dump device configured" and my system reboots. After reboot, the system repeats the initial installation.
My IDE config:
Primary Master - disabled (power disco'd from 8.4GB with W98)
Primary Slave - enabled 3.8GB hdd, no format, no partition - this is the drive i want to install to
Secondary Master - none
Secondary Slave - CD drive that boots
I have checked the HCL, my system is compatible.
I have used the installer cd & disk 1 to no avail.
Do I need to format my hdd that i want to install solaris on before i run the installer?
if so, how?
I have tried to create a boot disk but it failed. DD.EXE - does it need to need to be executed in a true DOS mode?
any help would be greatly appreciated, i will monitor this thread.
thanks!

I was having the same proplem as u but now Im just a few steps infront.
I found a sorta fix by searching this forum. It got me past the initial system reboots anyway. I've only installed one cd so far and now Im back cause of more problems - so don't expect it to get any easier ;)
Anyway check out this link. It goes on about P4s but apparently other systems are affected too e.g. I have a PII.
http://groups.google.com/groups?q=solaris+p4+setup_mca+kadb&hl=en&safe=off&rnum=1&selm=wyn1925hxr.fsf%40leo.tools.intra
HTH from another lost soul

Use of device configurations - update version of mobile component

Hello,
We changed coded some changes in standard XMAM30. The name of this mobile component is XMAM30_LAPTOP_SR3 (type is application) with version 3.0003.
This was added to a device configuration DC_MAM and assigned to a hierarchy. The users synced and got everything on their device.
Now we want to give them version 3.0004 of XMAM30_LAPTOP_SR3 (which we packaged). When I want to remove version 3.0003 from DC_MAM and add version 3.0004 (also type application) it tells me that the device configuration cannot be changed anymore because of the installation sequence
The only solution I found was to copy DC_MAM to DC_MAM_1, update DC_MAM1 with version 3.0004, the remove DC_MAM from the hierarchy and add DC_MAM1.
Is this the way to go???
kind regards,
jeroen

Hello,
I create a device configuration and add mobile components to which I assign a sequence.
I assign this device configuration to the hierarchy and the users then synchronize.
Then I followed your suggestion and deassigned the device configuration from the hierarchy. I cannot imagine that I have to search in device maintenance where the device configuration is used and delete it for every individual device...
Kind regards,
jeroen

Installation issue:create domain failed in configuration steps

Hello,
I am trying to install Oracle 11g BIEE in windows XP 32 bit machine.
Till configurtaion steps no problem.After that it takes some 1 hr in create domain step and at the end shows failed.
I searched in this forum, in one its said create a separate folder for temp and assign that as path in the
environment variable TEMP AND TMP
I did that still its same.
If i click continue then also same
Almost everything which comes after Create doman is failed.
Pls help,what should i do?
Thanks

Hello,
just one thing installing RCU when need to give the schema name i didn't give sys and gave a user who is normal user with dba privillege because of which i got some errors like insufficient privilleges like while running something like this...
"grant execute dbms_ouput to dev_mds"
and some plsql object creation failed like "Pl/sql object failed SD Clean up procedure",at the time when u click create button.
But at the end it showed the schema being created.
So i didn't bother much about that.
I cannot give sys user as i don't have my own db in my machine.
Is this a problem because of which now i am facing problem in configuration steps????????
Thanks

Error when creating new logical device in DOE

Hi,
This is the error i'm getting when i tried to create a new device in DOE
The following error text was processed in the system MI1 : CREATE DATA: The specified type is not a valid data type.
The error occurred on the application server sapv-nwmi710_MI1_00 and in the work process 6 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_USERS_FROM_CDS of program CL_SMMW_USER==================CP
Method: ONACTIONCREATE of program /1BCWDY/0O2TL8AJU0NGE3T9LDTT==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/0O2TL8AJU0NGE3T9LDTT==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
please help me solve this.
Regards,
Bala

Hi,
Check whether all SAP BASIS data objects are active and generated properly.
Do an initial download for USER DETAILS and USER AUTHORIZATION data objects.
For more details check the initial configuration guide of Mobile 7.1
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm
Regards,
Dhana
Edited by: Dhanasekhar Karuppanan on Aug 24, 2009 4:52 PM
Edited by: Dhanasekhar Karuppanan on Aug 24, 2009 4:53 PM

BUG: Can't create BC4J Application Module Configurations

Hello,
I'm using JDev 9.0.3.1 with Win2K and WinXP. There seems to be a bug in the BC4J Application Module Configuration Manager:
It seems to be impossible to create a new BC4J Application Module Configuration with the Configuration Manager of a BC4J Application Module. I can copy an existing AM configuration, but I can not rename it. Clicking on the OK Button in the Configuration Manager simply does nothing.
A work around seems to be to open bc4j.xcfg in any text editor, copy an AppModuleConfig element, save xcfg, in JDev remove the project form the workspace, readd it to the workspace (some caching issue of jdev?). Then the new AM config is there and can be modified.
In JDev 9.0.3 the Config Manager seems to work fine.
Regards
Stefan

The bug is mentioned in metalink bug 2849146.

Error in Device configuration

Hi all
I get the following error when trying to add the mobile components to the created Device Configuration.
com.sap.ip.mi.admin.core.ApplicationException:Field SEQUENCE_NO not a member of MEMGMT_APPLICATIONS_STR
Had any one had this kind of problem. Please advice
Thanks, Raj

First of all check whether your JCo RFC provider service is configured in your J2EE engine. This you can check by going to Visual Admin. In your server, got to usr\sap\<instancename>\DVEBMGS00\j2ee\admin and double click go.bat. Then login as J2EE_admin. Go to services in the cluster tab ->JCo RFC Provider and see whether your ABAP stack is configured.
1.If it is not, then login to NWA through your browser as J2ee admin, go to Administration->Deploy and Change-> Select MI Scenario and then select option 02 from the Template drop down list box, click on "Execute Template" Give the necessary details in the different text boxes and click install. Do the same for option 03 and 04.
2.If your Jco RFC Provider service is already configured/or you did the above step, log into your ABAP client through SAP Logon with the User which has all sap privileges - dont use ddic or SAP*. Then goto transaction SE11 click on DATA type, type MEMGMT_APPLICATIONS_STR and click Display. Check for the field SEQUENCE_NO. If it is not there, then click on Display/Change. Here you may require an access key - ask your Basis Administrator/Consultant for the same. Add the particular field to the structure and probably....your problem will be solved.
Edit: The type of the field is :
Component Type: NUM6
Datatype : NUMC
Length: 6
Short Text: Numerical Character Field of Length 6
Message was edited by:
Veeraraagavan R

Create button on ALV Dashbaord

Hello All,
We have upgraded from XRPM 4.0 to XRPM 4.5 and also have switched to ABAP Dashboards from Java Dashboards. However on this new Item Dashboard, Collection Dashboard, Bucket Dashboard, etc the Create button is not working and also i am not able to open the existing items from this Dashboards.
Is there any additional configuration that I am missing. Please help...
Best Regards,
SB

Hello All,
We have upgraded from XRPM 4.0 to XRPM 4.5 and also have switched to ABAP Dashboards from Java Dashboards. However on this new Item Dashboard, Collection Dashboard, Bucket Dashboard, etc the Create button is not working and also i am not able to open the existing items from this Dashboards.
Is there any additional configuration that I am missing. Please help...
Best Regards,
SB

DVD-SP on MBPro - can't open file or create buttons in new one

This is quite bizarre.
I've recently installed FCS2 on a new MBPro - latest OS, QT, etc...
For some reason, I can't create a button on a menu. I can't drag to create one - it never even shows the box. When I drag a shape on and choose "Create Button" - nothing happens.
When I try to open an existing project from another system, it hangs up during "Loading Menus".
I've even deleted the APP, the PREFs, and the RECEIPTS, then re-installed the program from scratch - and the exact same thing happens.
Any ideas?

Without system info or other details we can't tell you anything. Most likely this is a permissions issue where PS cannot access the templates for new documents or other configuration data nor may it be able to create its swap files. Look into that and verify your file permission as well as turn off security tools that may block this stuff. also run as admin to test.
Mylenium

X86 install - No Dump Device Configured

Hi
I tried to install Solaris 8 (x86) on my PII-300 machine with 192MB. However, when I install the Solaris 8, I don't even have a chance to create partition or whatsoever, I got an error sth like "No dump device configured" and it reboots automatically and the whole installation process starts over again after it successfully detected my hardware. Does anybody know what happen? I put my harddisk on primary master IDE with my CD-ROM drive on secondary master IDE.
Any help will be appreciated.
Thx.

you need a swap partition on this machine.

Anonymous device configuration in CCM 3.3(2)

Hi,
I want to configurate gatekeeper in CCM3.32 but I cannot find the place to put anonymous device if I compare with previous version of 3.2. Also, I cannot associate the gatekeeper to the route pattern as well? Pls adv.

I think the ability for putting an anonymous device is removed in 3.3. In Call Manager 3.3, the mechanism for installing an "anonymous device" has been completely replaced. There is no longer any place to create an "anonymous device" , rather there is a place to configure gatekeeper and then a new menu item to create intercluster trunks that are gatekeeper controlled.

Device Configuration for Samsung Galaxy Tab?

Longtime Flex/AIR developer here, but first time developing for Android.
Want to build for Samsung Galaxy Tab. In Flash Builder Burrito, when creating a Run Configuration, there's a list of devices to target. But the Galaxy Tab isn't one of them. Which one should I use? Or do I just create one and enter the right dimensions etc? Is there any information associated with those device configurations besides the pixel dimensions and pixels per inch?

Try the nearest match in terms of resolution. Also if you design your controls with relative size (%age based or relative to a fixed initial size), it shouldn't be a problem on device. There is also a blog post which may help you in writing your app: http://www.adobe.com/devnet/air/flex/articles/writing_multiscreen_air_apps.html

Create button in Device Configuration

Similar Messages

Maybe you are looking for