Create/Cahnge Cust Master data into pdf?

Hi All,
I've a requirement that when the user enters/creates/changes customer details and when he saves it..this then should create a pdf containing all master data and should be FTPed to another secure FTP site..
please give me suggestions on how to go about this?
Regards,
RS.

Hi,
Could you please give more details on the approach to achieve this and the place where I can write the event etc..?
Regards,
Raghu.

Similar Messages

  • Error while loading the master data into hierarchy

    Hi,
    When i am trying to load the master data into a hierarchy, it is showing me the following error.
    "Invalid Entry, hierarchy xxxxxx does not exist".
    Can you please tell me what might be the possible cause for this error.
    Thanks,
    Prateek

    Hello
    Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure 
    ->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
    Hope it will help!!
    Regards,
    Sandeep

  • Loading InfoObject master data into Cube

    Hi Guys,
    I have a  question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
    Data is being loaded into the InfoObejct. But when I check the cube there is no data.
    How do I load this master data into the cube without update rules?
    Thanks in advance.

    Hi,
    i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
    Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
    It depends upon your requirememt.
    Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
    In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
    As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
    Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
    In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
    You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
    You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
    You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
    Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
    Then just do the normal restrication at the report level
    You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
    then you can use it to restrict in the cube
    You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
    http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
    You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
    Regards,
    Hareesh

  • Convert Binary Data into Pdf & send it as attachment in a mail from R/3

    Hi,
    Scenario:
    The interactive form saved in WebDynpro Application is sent to R/3 in binary format. It has to be converted into pdf and sent it as an attachment in mail to the respective person in workflow.
    Kindly help on these issues :
    1. How to receive the binary data in R/3 sent by the WebDynpro Application ?
    To my knowledge we can receive the binary in XSTRING data type. Plz correct me if am wrong.
    2. How do i convert the received binary data into pdf ?
    Thanks,
    Bharath Kaushik Krishnan

    HI Bharath,
    I think You can reuse teh XString for binary data.there are certain function modules in R/3 for creating pdf/for sending it as pdf attatchment.please search in abap forums you will find more information
    With Regards
    Naidu

  • BAPI/function module to create/update vendor master data

    Hi
       We are on ECC 50 and have a need to update vendor master data through a programatic interface ( non-dialog ) with ABAP. What is a good function module that can be used to create/update vendor master data - I looked at BAPI_VENDOR_CREATE and did not find any input interfaces that can be passed to this BAPI.
    Previous experiences with the right BAPI for this purpose that can be shared is appreciated. <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Feb 26, 2008 5:58 PM

    Hi Kiran,
    If you want to load the vendor data into sap its better to go with LSMW batch input program.
    object 0040
    method 0001
    program name RFBIKR00
    Program type B
    this would be a good choice. Recently i did the same.

  • ADS: com.adobe.ProcessingException: Error exporting Data into PDF

    Hi Experts,
    when trying to upload a PDF file to my WD4A application and extract the data I am getting this ADS Error:
    ADS: com.adobe.ProcessingException: Error exporting Data into PDF - PDF Exception: Invalid object for the XFA entry in the forms dictionary.(200201).
    The error only appears when I`m trying to upload a PDF file that has been created after an Java Script Update of the Adobe Form Builder. My actual version is 710.20070621204053.403203.403203 - ContainerFoundation_JS.
    All PDF files created before this update can be uploaded without problems. Am I missing something to be updated?!
    Thanx & best regards,
    Oliver

    Dear Oliver,
    I am facing this problem, can you recall how did you resolve this, please ? Thank you.
    Regards
    Kir chern

  • Merging data into PDF

    Hi,
    I am trying to merge data into PDF using FDF toolkit and seem to be having trouble viewing the document in IE 6.0. I tried setting the content type on the response to 'application/vnd.fdf'
    Would appreciate if i can get some input on this.
    Thanks.

    There is a good library to create pdf from a java program or a servlet in this page:
    http://www.lowagie.com/iText/download.html
    It's easy to use and there are different examples. It also allow you create the pdf document on-line in the client.
    If you need some help me I have used it and I can send you an example if you need.

  • Loading Master Data into a DSO

    Hi Experts,
    I am unable to analyse whether loading data from Master Data InfoObject into a DSO will cause performance issues or will that work fine.
    I was trying to do the same.  Awaiting for your inputs on that.
    Thanks,
    Vijay

    Latha,
    Loading master data into a DSO can be done using the following steps:
    1) Right click on the DSO and select Create transformation... option.
    2) In the dialog box that appears, select Object Type as InfoObject and in the text box right below you give the name of the object.
    3) In Subtype of Object selection, select attribute or text as per your needs.
    4) select ok and you should see the transformation, map and activate the transformation.
    5) create DTP and run it.
    Hope this helps, [ you got my name wrong im vijay]

  • Can I reuse objects without Master data and load master data into it?

    Hai,
               I have a standard object that doesnot have Master data. Its already used somewhere else. It matches the name I want but I need to load some master data into it. Does resuing it in my catalogue and loading Master data into it hurt anything? Or should I create a new one?
    Thank you.

    Hi Visu,
    The same InfoObject can be included in more than one InfoObject catalog without any issue. Also loading master data would not hurt an existing InfoProviders where it is being used.
    Hope this helps...

  • Caller-70 Error while loading master data into infoobject

    hi ,
    I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
    Short dump in the Warehouse
    Diagnosis
    The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
    System Response
    "Caller 70" is missing.
    ST22 dump analysis is as below:
    Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in                  
    "VALUE_TO_SID_CONVERT_DB".                                                                  
    The main program was "RSMO1_RSM2 ".
    Please help as soon as you can..Production problem....
    Regards
    Rakesh

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • How to include the UDF of items master data into PLD (Inventory in Warehouse Report (Detailed))

    Hi,
    Is there a way to include the UDF in the items master data into the <<Inventory In Warehouse Report (Detailed)>> PLD?
    I checked the default layout and found out all the column source type is "free text" and the content is #Item, how do I know the value of the UDF?
    Thanks

    Hi,
    Some of the standard reports are hardcoded in sap. Not possible to add UDF field in PLD.
    Also refer this thread Variables -  Sap business one
    Thanks & Regards,
    Nagarajan

  • How to downlaod vednor master data into excel sheet in SAP Application serv

    Hi friends
    I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
    Please help me.
    Thanks

    Hi Ramesh,
    It is not possible to download data in Excel file on application server. You can better download the same in tab separated text file and then convert that text file to XLS.
    Please do not open multiple threads for same problem.
    Regards,
    Atish

  • How to downlaod vednor master data into excel sheet in SAP Application ser

    Hi friends
    I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
    Please help me.
    Thanks

    Hi Ramesh,
    You can download the data into application server using the following code. You will have the vendor details in the internal table. Then you will open a file and transfer the data as follows.
    *   Download internal table to Application server file(Unix)
    DATA: e_file like rlgrap-filename value '/usr/sap/tmp/file.txt'.     
      open dataset e_file for output in text mode.
      lOOP AT it_datatab......
        transfer it_datatab to e_file.
      ENDLOOP.
      close dataset e_file.
    In application server you will have only files and not excel sheets.
    Reward points if useful,
    Aleem.

  • How to convert the alv list data into pdf format

    Hi Expersts,
                      Is it possible to convert the alv list output data into PDF format? if yes, then please help me with this issue.
    thanks in advance,
    Regards,
    Samad

    hii samad,
    you can go through these link.i hope it ll solve your purpose
    How to convert list output to PDF
    Display ALV list output in PDF format
    regards,
    Shweta

  • How to download the script data into pdf file

    how to download the script data into pdf file
    i have one option to download the script data to pdf file --->rstxpdft4 program.
    i have one doubt how to use this proogram.or any function module to download the script data to pdf file.
    Thanks and regards,
    Sri.

    Hi      Sri Sai,
    I know one method to convert the sapscript to pdf file :
    first generate a Spool Request for the required Sapscript
    then goto transaction SP01 and copy the generated Spool Request number
    now execute the SAP report RSTXPDFT4
    here enter the copied Spool request number and the target directory into the parameters
    execute the report
    required pdf file will be generated into the target directory
    i hope it will help you out
    Please refer this simple program:
    http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
    Reward points if found helpful....
    Cheers,
    Eshwar.

Maybe you are looking for