Create Card Collage with 30 pictures on each sde

I want to create a Collage of 30 images (pictures of people) I need to create 2 of these. I will be up-loading them to our business site and will be using our own software to create a REAL Card which will be Mailed by the US Postal Service for me. (Our business addresses, stamps, licks and send cards for clients.)
The Real Card will have a picture on the front and then in the inside left will be the 1st group of 30 people and the inside right will have the 2nd group of 30 people.
I have been able to create the collage and upload them but when they get on the card. The groups are real small. When I am creating the collage it looks big and ok but when I save it I am probably not saving in the right size.. I have looked around but can not find out how to take the group of 30 pictures and then save it in a different size.
I am on a deadline to get this done. Any help would be appreciated.
Cas Nowak
NC

The following are the requirements that I need for 'input' into our business program.
I am trying to figure out how the dimensions that I need for my cards equate to the layout for the collage in Photo Elements.
Horizontal Card
Template size: 5.375 " x 7.5" (1613 pixels x 2250 pixels)
1/4" of image will trim from top, bottom, & right side.
1/8" of left hand side of your image will wrap to the back of the card. In Picture Plus you will not see this part of the image.
Trim size is 5" x 7" (1500 pixels x 2100 pixels)
Safe area: 4.5" x 6.5" x 4.5" (1350 pixels x 1950 pixels)
Vertical Card
Template size: 7.5" x 5.375" (2250 pixels x 1613 pixels)
1/4" of image will trim from top, bottom, & right side.
1/8" of left hand side of your image will wrap to the back of the card. In Picture Plus you will not see this part of the image.
Trim size is 5" x 7" (1500 pixels x 2100 pixels)
Safe area: 6.5" x 4.5" (1950 pixels x 1350 pixels)
This is how I created the Collage Layout
File > New > Blank File
Preset= 4x6
Width= 4"
Height= 6"
Resolution 300 Pixels (I have tried 500 & 600 also)
Color Mode= RGB
Backgroud= White
File Open
Select picture
Move picture into Layer
(Comes in real small.)
Bottom Left hand corner it says 33.33%
Based on the requirements I need for input. Am I doing it wrong to create the template(layout)
Thanks
Cas

Similar Messages

  • How do I create a collage with original size pictures???

    Hi everyone,
    I try to create a collage with aperture and orinal size pictures.
    As soon as I try to print the collage, the quality is absolutely bad.
    Can anyone help me out?

    Does anyone have any idea, what a app is to create collages?
    Almost any graphics program or DTP program works.  Depends very much on how sophisticated you want to get.
    You can put multiple images on a page, and even use alpha-channels and (iirc) opacity controls, using just Pages.
    The point to note is that these are compositing actions.  Aperture is not a compositor (by design).  It stores and organizes your digital photos, and provides tools to make each photo as good as possible.  It does not allow you to combine Images, or add text or geometric primitives to Images (though you can do this with some plug-ins).

  • I'm new to Photoshop CC and trying to create a collage with 16 pictures.  Help

    I need help in creating a collage with 16 pictures.

    So you created a document 192000 pixels wide, and 108000 tall, and  set the type to be 2 inches tall.  Yes, the type is going to take a few minutes to render in that document.
    Yes, you created a document much bigger than you probably intended (you probably wanted 1920 PIXELS by 1080 PIXELS).
    Pixels and inches are not the same, and you need to pay attention to the units.

  • I'm debutante in oracle 10g how to create a database with picture?

    I'm debutante in oracle 10g how to create a database with picture? help please

    d7401ec1-d4d6-4e54-9eb4-2181ac367d0c wrote:
    I'm debutante in oracle 10g how to create a database with picture? help please
    Oracle 10g is obsolete.  Oracle 11g is already at terminal release.
    Have you installed the Oracle rdbms software?
    Installing Oracle and Building the Database
    If you are going to be a professional DBA, you need to learn to
    1) read the documentation
    2) wean yourself from dependence on pictures and GUIs.
    3) read the documentation
    =================================================
    Learning how to look things up in the documentation is time well spent investing in your career.  To that end, you should drop everything else you are doing and do the following:
    Go to  docs.oracle.com.
    Locate the link for your Oracle product and version, and click on it.
    You are now at the entire documentation set for your selected Oracle product and version.
    BOOKMARK THAT LOCATION
    Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
    Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
    Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
    Do the same with the SQL Reference Manual.
    Do the same with the Utilities manual.
    You don't have to read the above in depth.  They are reference manuals.  Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
    Then set yourself a plan to dig deeper.
    - *Read a chapter a day from the Concepts Manual*.
    - Take a look in your alert log.  One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
    - Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
    - *When you have finished reading the Concepts Manual, do it again*.
    Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
    =================================

  • I I am trying to create a collage with 4-6 photo so I can print them on one sheet.   Can this be done in IPHOTO?

    I am trying to create a collage with 4-6 photo so I can print them on one sheet.   Can this be done in IPHOTO?

    Here are 3 options for future reference:
    1. With the setup you've described, apply a Match Move behavior to  the text and make the rectangle the source. Change the Transform parameter to Mimic source.  This way you can still adjust the text postion as needed, but the rectangle will drive the animation.
    2. Use a group to do the animation.  Put both your rectangle and text in the same group and animate the group's postion.
    3. Use the Link behavior.
    Each of these has it's advantages depending on what you need.

  • Can i create a collage with iphoto for ios

    i want to create photo collages like in intacollage but with iphoto. can i?

    No, iPhoto does not support compositing of photos.

  • Can't create the mview with refresh on each commit

    I have these underlying tables:
    SQL> desc ta_footn_typ
    Namn Null? Typ
    FOOTN_TYP_ID NOT NULL VARCHAR2(2)
    APPL_COD CHAR(1)
    NATIONAL_DATA NUMBER(1)
    (FOOTN_TYP_ID is a PK)
    SQL> desc TA_S_DESC_FOOTN_TYP
    Namn Null? Typ
    FOOTN_TYP_ID NOT NULL VARCHAR2(2)
    LANG_COD NOT NULL CHAR(2)
    FOOTN_TYP_DESCR VARCHAR2(100)
    (FOOTN_TYP_ID and LANG_COD is a composite PK)
    from these two tables I would like to build a mateerialized view with refresh
    on commit with the following select-statement:
    select type.*, eng.FOOTN_TYP_DESCR as FOOTN_TYP_DESCR_ENG, nat.FOOTN_TYP_DESCR
    as FOOTN_TYP_DESCR_NAT from TA_FOOTN_TYP type
    left join TA_S_DESC_FOOTN_TYP eng on eng.FOOTN_TYP_ID = type.FOOTN_TYP_ID and
    eng.LANG_COD='EN'
    left join TA_S_DESC_FOOTN_TYP nat on nat.FOOTN_TYP_ID = type.FOOTN_TYP_ID and
    nat.LANG_COD='EE'
    I can create the mview with the options:
    on demand, automatically on, never
    but that is not interesting for me,
    I need refresh on commit on the underlying
    tables.
    So I tried -->
    CREATE MATERIALIZED VIEW "EMTS_NF"."MY_MVIEW"
    TABLESPACE "EMTS_EMTS_NF"
    BUILD IMMEDIATE
    USING INDEX
    TABLESPACE "EMTS_EMTS_NF"
    REFRESH FORCE
    ON COMMIT
    AS
    select type.*, eng.FOOTN_TYP_DESCR as FOOTN_TYP_DESCR_ENG, nat.FOOTN_TYP_DESCR
    as FOOTN_TYP_DESCR_NAT from TA_FOOTN_TYP type
    left join TA_S_DESC_FOOTN_TYP eng on eng.FOOTN_TYP_ID = type.FOOTN_TYP_ID and
    eng.LANG_COD='EN'
    left join TA_S_DESC_FOOTN_TYP nat on nat.FOOTN_TYP_ID = type.FOOTN_TYP_ID and
    nat.LANG_COD='EE';
    But it gives mee ORA-12054,
    any advices???

    Try it with REFRESH FAST instead of REFRESH FORCE.
    Cheers, APC

  • Creating Photo Collages with Automator

    Hi.
    I'd like to use automator to create a photo collage from a set of pictures.
    Let's say I have four pictures, each of varying dimensions. They're named sequentially in the order I'd like them to appear. I'd like an automator script that would take the photos, scale them to the same height (they're in portrait layout), and arrange them left to right in a collage.
    I'd like the result being four photos stitched right next to each other, all the same height, filling out the screen. The ideal scenario would obtain the height of the tallest photo and upscale the others to that same height. But I'd settle for a set height (determined either by a fixed number or a prompt asking the user to set it each time).
    Thanks.

    Haven't had time to work on this problem but I have seen something almost identical done before. The result was a 20" x 30" poster but The same process should work with your photos. http://media.libsyn.com/media/macbreak/macbreak20060615-008-450p-h264.mov

  • Creating dynamic buttons with pictures on them

    Hi there,
    What is the procedure for doing so?
    I need to create 5 buttons which looks the same, and each one of them has a picture on it.
    I'm new to Flash/Action Script.
    I created a button symbol, named it and created linkage to AS.
    I also created a MovieClip that holds the picture I want to put on top of the button and created a linkage.
    Then in the code I create two instances and display them
    This is the code:
    public function setBBWBtnProp(btn:btnChoose, tmb:MovieClip, idx:int)
         btn.height = 120;
         btn.width = 120;
         btn.x = 20;
         btn.y = 15 + 140 * idx;
         tmb.x = btn.x + 5;
         tmb.y = btn.y + 5;
    var btn1:btnChoose = new btnChoose();
    var tmb1:mvBBW02Thumb = new mvBBW02Thumb();
    setBBWBtnProp(btn1, tmb1, 0);
    ph.addChild(btn1);
    ph.addChild(tmb1);
    Now, it works but the movieclip blocks the button...
    Any idea how to do it correctly...

    I'm only an intermediate scripter, but in my experience it seems like it's a mistake to mix coding with buttons. Instead use a movie clip and assign listeners to it.
    look up functions like the onese I use below
    actorButton is my movie clip
    private function registerMyButton(){
                actorButton.buttonMode = true;
                actorButton.addEventListener(MouseEvent.CLICK, reportClick);
    function reportClick(event:MouseEvent):void{
                var thisPage = myImgData.web_page_str;
                var targetURL:URLRequest = new URLRequest(thisPage);
                navigateToURL(targetURL, "_self");
    hope that helps
    ...gregory

  • Creating TREE REPORT with CHECKBOX against each row

    Hi Friends,
    I need to create a <b>TREE REPORT with  CHECK BOX</b> against each row. when the user selects a row and clicks on a custom button then those should get populated into an internal table. <b>This is HIGH priority</b> one and I have tried my best but couldnt find any solution. Please advise me some sol.
    thanks in advance for your valuable time and help.
    Regards
    srithan
    Message edited by me for easyness
            Reddy

    Hi
    Following code is to add checkboxes in ALV tree:
    FORM add_root_request USING pls_data_ TYPE csg_gs_outtab_p_key__l_is_sub_node_ TYPE c
    CHANGING pl_carrid_key._node = nodes->add_node( related_node = p_key
    relationship = cl_gui_column_tree=>relat_last_child ).
    ... §0.2 if information should be displayed at
    the hierarchy column set the carrid as text for this node
    text = p_ls_data-object.
    node->set_text( text ).
    ... §0.3 set the data for the nes node
    node->set_data_row( p_ls_data ).
    item = node->get_hierarchy_item( ).
    item = node->get_item( 'FCHECKBOX' ). "FCHECKBOX is my radio button field in internal table which I am using to populate the ALV
    item->set_type( if_salv_c_item_type=>checkbox ).
    pl_carrid_key = node->get_key( )._
    CATCH cx_salv_msg.
    ENDFORM_._Following code is for handling checbox_change event
    PERFORM application_action_events.
    FORM application_action_events .
    data: lr_events type ref to cl_salv_events_tree.
    *data gr_events type ref to lcl_handle_events.
    lr_events = gr_tree->get_event( ).
    create object gr_events.
    set handler gr_events->check for lr_events.
    set handler gr_events->on_link_click for lr_events.
    set handler gr_events->on_before_user_command for lr_events.
    set handler gr_events->on_after_user_command for lr_events.
    set handler gr_events->on_keypress for lr_events.
    endform. " application_action_events----
    CLASS lcl_handle_events DEFINITION.
    PUBLIC SECTION.
    METHODS:
    check FOR EVENT checkbox_change OF cl_salv_events_tree IMPORTING node_key columnname checked. "Here node_key is the row number
    ENDCLASS. "lcl_handle_events DEFINITION
    CLASS lcl_handle_events IMPLEMENTATION
    §4.2 implement the events for handling the events of cl_salv_table
    CLASS lcl_handle_events IMPLEMENTATION_._
    METHOD check_._
    WRITE 'hello'_._
    DATA lwa_modify_check_ TYPE REF TO csg_gs_outtab.
    node_key = node_key - 1_._
    READ TABLE csg_gt_list INDEX node_key REFERENCE INTO lwa_modify_check._
    if columnname = 'FCHECKBOX'_._
    IF checked = 'X'_._
    If the value in internal table is set to X, then it is deselct
    lwa_modify_check->fcheckbox =_ ' '_._
    ELSE_._
    lwa_modify_check->fcheckbox =_ 'X'_._
    ENDIF_._
    ENDIF_._
    if columnname = 'CHECKBOX_READ'_._
    IF checked = 'X'_._
    If the value in internal table is set to X, then it is deselct
    lwa_modify_check->checkbox_read =_ ' '_._
    ELSE_._
    lwa_modify_check->checkbox_read =_ 'X'_._
    ENDIF_._
    ENDIF_._
    *MODIFY TABLE csg_gt_list from l_wa_modify_check.
    flag_test = flag_test + 1_._
    ENDMETHOD_._ "check
    ENDCLASS_._ "lcl_handle_events IMPLEMENTATION
    Please give me reward points

  • Any an idee how to create an signiture with picture in text on ipd ?

    I try to create an signuture on my ipad. But I would like to insert an picture (2d Barcode) to it.
    any idea how get along with it?

    smon wrote:
    I think it's just using Jdeveloper to generate a Soap request, but you already have your xml? Or is it not Soap? There's PLSQL in there anyway for parsing the response.Hi,
    Sorry for the delayed reply.
    Mine is not generating a Soap request. Simply PL/SQL package I assume. I understand the part where I need to parse the XML Data in my package but I don't get the part on how the outside world can execute my package.
    Any suggestions?
    Thanks,
    Allen
    Edited by: Allen Sandiego on Apr 1, 2011 7:26 PM

  • How can I create a teaser with pictures on imovie?

    I would like to use the tool that help you create amazing teasers, but seems like we can only use videos! Is there a way, or should I forget about doing a teaser, because I only have pictures in the movie I want to do a teaser for. Thanks a lot for your answers

    I just found the solution, don't need help anymore thank you!

  • How to create a newsletter with pictures

    I created a text document using TextEdit.  How can I insert pictures from IPhoto to create a Christmas newsletter?

    You should be able to drag the pictures from iPhoto directly into the TextEdit document.

  • HELP! i created a movie with pictures and inserted clips from video I taped, then added music. It publishes and I made a dvd.revised this and during it, got error, now the video clips go black although I see the clips. WHAT to do??

    After I upgraded the Imovie to the latest vesion, II started getting errors and it would boot me out. I see the movie clips but when it plays or previews its a a black screen, althought you can hear the backgorund music I added. I have reimported thefile clips and they will play in edit mode but when re insert the same clips they still play black.. how do i get this to work!?!

    ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

  • Why does iPhoto create multiples when importing pictures?

    OS X Yosemite 10.10.2
    iPhoto version 9.6
    I have a new MacBook and I am attempting to import pictures to iPhoto that were created by various devices - old digital cameras, scanners, iPhones.  The original images import without trouble, however iPhoto is creating an extra THREE pictures for each ONE that I import.  Please see the attached screenshot of my iPhoto after importing a few folders.  Take for example the Bowl for Kids folder - you will notice that the original folder has 20 pictures, and it is followed by an additional folder with 60 pictures.  The same situation is repeated for each folder.  The additional folders all share the same name - "d312a08daf7d..." and have EXACTLY three times as many pictures as the previous folder.  I have verified that the pictures contained within are indeed triplicates of the originals.
    Any assistance would be greatly appreciated.

    I did not import an existing iPhoto Library.
    Starting with a completely empty Photo Library, I navigate to File > Import to Library and select a single folder (Bowl for Kids).  This folder has 20 photos in it, however iPhoto imports 80 (20 originals and 60 multiples, as evidenced by the screenshot).  I then repeated the process for the other two folders.
    The photos shown in the screenshot were taken from various devices many years ago.  None of the above were taken on an iPhone.
    The photos reside on my MacBook hard drive under Users > Worgowan > Documents > Pictures and Videos.  I chose to place them here to keep them separate from the native Pictures folder.
    To answer an inevitable future question, here are some settings from my iPhoto Preferences.
    > iCloud > My Photo Stream (OFF)
    > iCloud > Photo Sharing (OFF)
    > Advanced > Importing: Copy Items to iPhoto Library (OFF)
    > Advanced > Edit Photos (In iPhoto)
    > Advanced > Use RAW when using external editor (OFF)
    > Advanced > Save edits as 16-bit TIFF files (OFF)
    > Advanced > Look up Places (NEVER)
    > Advanced > Include location information from published items (OFF)

Maybe you are looking for