Create Category question in DMM 5.2.2
Hi There,
My customer has noticed that a user given limited permissions in the DMM Media Library over one content folder for example is still able to create categories higher up the tree. You’d expect to be able to create nested categories lower down (as you can) but you should not be able to create categories higher up.
Admittedly, you can only add and see content for the folders that you’ve been given permission to but it would be better if you couldn’t even create the categories in the first place.
The customer wants to know if you can stop a user from doing this? I.e. the users should only be able to create categories in their folder and any subsequent child folders.
Thanks,
David
Thank you! To create a booklet, I ended up having to use landscape configuration for the paper and adding two text text boxes. The trick it to be clear with the layout of the pages so they print in the correct order. I've submitted a request that Mac create a booklet template. Thanks again!!!
Similar Messages
-
How do I create quiz question in reflow?
How do I create quiz question in reflow? There is form element but how am I going to get the value of the radio button or the text entry?
You can design the quiz in Reflow but you'll need to code up some sever side code to collect the data and reports for your quiz. If you don't want to write the code you could look at Muse or an online service like typeform or some elearning solution.
Hope that helps,
Chris -
It was a similar question I had asked before,but I asked it again this time differently 'cause I couldn't edit or delete the last one.Am I being hacked or is this some aweful glitch or something? 'cause when I clicked on the name that the email stated created my question,it actually brought me to someone elses' Apple communities profile.
Most likely you just subscribed to that other thread. Click your user name to get to your account information and go to the Manage email notifications area. I'll wager you'll see yourself subscribed to that other thread, and can remove that subscription there if you wish.
Regards. -
Punch out product category question
Hi all:
We are using a punchout from Gateway. The OCI sent from the vendor does not have a product category (see below).
"NEW_ITEM-MATGROUP[1]" value="">
We have 2 product categories assigned to the user in the Ext Attributes. While creating the SC using the catalog, the system picks up the second product category defined in Ext attributes.
How does it do it ? Is there a way it picks up the first product category ?
-BakuleshHi Bakulesh,
Glad to hear that your problem is solved. Can I ask for a favor please? I need to understand that during punch-out, how data is brought back to SRM screens from catalog. I would be really very thankful to you, if you send me some config document or all the customization steps involved in this.
Best Regards,
Amit
PS: I have created one separate question for this, if you wish you can ans that so that I can assign you the points -
Issue in creating category tile for Lumira stories
Hi,
Im trying to create a category tile for Lumira stories with multiple search keywords.
Lumira stories with single search keyword is working fine.
im folling the below post
Creating a category tile for SAP Lumira stories
When i create dynamic content tile for multiple search keywords <SEARCH_STRING> %27Sales%20Report%27%2C%272012%27 is not working in the search url (which is the above post)
/sap/bi/launchpad/v3.xsodata;o=LUMIRA/Items/$count?$filter=ItemType+eq+%27sap.lumira.story.type%27%20and%20substringof(tolower(<SEARCH_STRING>),tolower(Name))
But the below search url is working perfectly for displaying count of Lumira stories with multiple keywords.
/sap/bi/launchpad/v3.xsodata;o=LUMIRA/Items/$count?$filter=ItemType%20eq%20%27sap.lumira.story.type%27%20and(%20substringof
(tolower(<SEARCH_STRING1>),tolower(Name))or%20substringof(tolower(
<SEARCH_STRING2>), tolower(Name)))
But sadly parameters url is not working for multiple keyword
itemType=sap.lumira.story.type&keyword=<SEARCH_STRING>
So i'm able form a tile and display the count with multiple search keywords. But when i'm opening the tile it throws an error message.
Can anyone help me to form parameters url with multiple keyword ? so i can display two different set of stories in a single tile.
Thanks in advance.
Regards
Yokesvaran KumarasamyHi Boris Kovacevic
Thanks your response,
My service url is
/sap/bi/launchpad/v3.xsodata;o=LUMIRA/Items/$count?$filter=ItemType%20eq%20%27sap.lumira.story.type%27%20and(%20substringof(tolower(%27emerging%20issues%20navigation%27),tolower(Name))or%20substringof(tolower(%27root%20cause%20analysis%27),tolower(Name)))
My parameter entry is
itemType=sap.lumira.story.type&keyword=Emerging%2CRoot
Service url is working fine for me
But my parameter entry is not working for multiple search keyword. When i use the above parameter entry its not working.
Regards
Yokesvaran Kumarasamy -
Creating a question and answer database with un incremental question table
Hello,
i have a project which am suppose to create a database which will be Question and Answers.
the Question are not to be increasing in the database but only the answers.
exp:
Question Table:
Questions: have you slept well?. Do you have children?. and so on till 12 question.
Answer Table:
Answers : 1.yes, 2.no, 3.may be, 4.some how,
and this Answer should be updated in the database with numbers for instant yes should be 3, no should be 0, may be should be 2 and some how should be 1.Related forum thread:
http://stackoverflow.com/questions/4695227/how-to-structure-a-database-with-questions-and-answers
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Allow users to create Challenge Questions in OAAM
Hi,
I have OAAM 11.1.1.5 BP01 implemented and integrated with OIM and OAM 11.1.1.5.2.
I want to know if a user can be provided with the functionality to create his own challenge questions instead of selecting the OOTB ones.
If yes, what would be the implementation steps to achieve this?
Please respond.
Thanks,
-Kulesh...AFAIK, no. You can definitely customize the existing challenge question set to add/edit/remove any number of questions from the OOTB defaults per your client/organization's requirements... but on an individual user level, there is no functionality to custom define their own unique question/answer set.
-
Hi,
Does the "Exchange email address policy" actually create the mailbox, or just the email address?
If not, is there an Exchange policy to actually create a mailbox?
thanks,
dwIf I understand correctly, your second question is about creating automatically mailboxes in Exchange 2013. You have two options:
Create the mailboxes manually (one by one) in the GUI - Exchange Admin Centre
Bulk create the mailboxes with a script in Exchange Management Shell
The following video demonstrates the second approach: -
I am new to Oracle, so please bear with me and my questions...
I have been trying to create a new schema in a existing database using the Oracle Enterprise manager and I could not find a way of doing so...
What do I do?...Here you are going to find all the information that you need regarding how to create users in the database :
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_84a.htm#SQLRF01503
[email protected]
Joel P�rez -
IVI questions with DMM and SWitch
I am trying to simulate an NI-4060 DMM and numerous SCXI-1129 cards using the IVI drivers in CVI.
Of preference I want to setup the simulation in MAX rather than programmatically in my application. I have numerous questions:
Is there a document that shows you how to setup MAX to simulate an IVI instrument??? Everything that I have read so far talks about the architecture, how wonderful IVI is what you can do etc, but NOT EXACTLY HOW you set-up MAX - one document briefly touched on this but with no detail whatsoever. There seems to be a lot of assumed knowledge in all the docs.
If I try and configure in MAX I can get the DMM working, but the exact same steps give an error for the switch cards in my application. An
y ideas?
How do I use Soft-panels from my application?
If I am programmatically using an InitWithOptions which seems to be the only way to get the Switch cards to simulate what is the expected syntax or options for the "DriverSetup" string????
I am using NI-DAQ 6.9.0f7 and IVI 1.61 with CVI 5.5 on NT 4.0Ricardo,
There is a document on our web site on how to configure your IVI system in MAX and also how to simulate your hardware in LV and CVI using IVI drivers:
ni.com>>Resource Library>>Instrument Connectivity>>Instrument Driver IVI
or
http://zone.ni.com/devzone/devzone.nsf/webcategories/5FB594A1C20D93E3862569FD0071D18A?opendocument
This should point you in the right direction. I will continue to gather information and post what I find!
Best Regards,
Chris D
Applications Engineer
National Instruments -
How to create priority questions
I have 15 questions in a form where the priority should be between 1 to 15.
So if Q1 I pick priority 1, Q2 would have to show (2 to 15). if I pick priority of 15 for Q2 then Q3 would have the options of 2 to 14 and so on ....
In other words each question would have to belong to one of the priorities exclusively.
Survey Monkey has this feature. How do we implement this in formscentral?The incident will be created with the default values. After the incident is created the workflow will be triggered (based on the criteria defined in the workflow) and applies the new template. There is a short delay between the incident is created and the
workflow is triggered and template is applied. It could be around a 60-90 seconds delay.
At least this way it works if everything is configured right.
Andreas Baumgarten | H&D International Group -
How do I grant "create index" on any table to a user.
Is it "grant create index to <USER1>User must be granted with ALTER OR CONTROL Permission to create an index.
GRANT ALTER,CONTROL ON SCHEMA::SALES TO <User>
--Prashanth -
Hi ,
I have problems to understand the create type command !
CREATE TYPE test_type AS OBJECT
( test_id_pk number,
test_city varchar2(20),
test_state varchar2(10),
test_zip number
Is this a kind of reference or what ?
thank for any commets...
marcelIn Oracle, a TYPE is a database object and also an OBJECT in the Object-Oriented Programming sense (although there are key differences between Oracle's implementation and say Java). A TYPE has attributes (and so can be used to hold data) and it has methods (which can manipulate that data).
You can find out more by reading the online documentation (which you will find here).
Cheers, APC -
hi all, I just want to verify something about chapters, if you'll help me out. Here is how I understand how chapters are created:
I am using Final cut express, putting in chapters where needed. I export to "quicktime movie" . Then, I import that MOV into iDVD and my "scenes" menu is generated. great.
Using FCE, when I "export using quicktime conversion" I cannot get my scene menu generated. Is that true? Is this just a restriction on the way it works. I really need that Scenes menu.
The reason I want "export using quicktime conversion" is because I want to modify the settings - I want H.264 and higher quality. The default quality is just not good enough.
If I cannot get Scenes generated using my method, I will have to render each chapter and there are 14 of them! ugh. Please advise. Thank you!I think you will get a better response if you post this in the FCE forum:
http://discussions.apple.com/forum.jspa?forumID=936
I am asking the hosts to move this thread to that forum. -
Hi. Just curios.
Lets say I have a class called MyClass. In that class I have an method called myMethod()
I then create an Object of that with.
MyClass mc = new MyClass();
mc.myMethod(); Is that better then to do
new MyClass().myMethod()What I think is the difference.
1 with the first example I create an Object that stays "alive"
2 in the second example the Object dies when myMethod() is complete.
Have I understood this correctly ?MagnusT76 wrote:
Hi. Just curios.
Lets say I have a class called MyClass. In that class I have an method called myMethod()
I then create an Object of that with.
MyClass mc = new MyClass();
mc.myMethod(); Is that better then to do
new MyClass().myMethod()
Neither one is inherently better. If you need to use the object other than for that one method call, you have no choice but to go with the first option. If that's all you need the object for, and the class name and method name and signature are short enough for it to be readable, you might prefer the second one.
What I think is the difference.
1 with the first example I create an Object that stays "alive"
2 in the second example the Object dies when myMethod() is complete.Java doesn't really have a concept of objects being "alive."
In the first case, you are retaining a reference to the object, and as long as you have that reference, it cannot be garbage collected.
In the second case you are not directly retaining a reference to the object, but that doesn't mean that one didn't escape from the method. So the object may or may not be GC-eligible.
public void myMethod() {
someList.add(this);
}If myMethod() does something like that, then the object is not eligible for GC after your call, even though you didn't explicitly retain a reference, because the list now has a reference to it.
Maybe you are looking for
-
How to use "machine name" in new report vi?
I have a computer on a network that has Microsoft excel installed. On another computer I have an application that will take an excel file and stuff a bunch of data from a database into specific cells to generate a report. The vi works fine on my comp
-
Yahoo mail remebers my password but not the user name. I've checked the remember box.
I've checked the remember box but Firefox is remembering the password but is not remembering the user name when I sign in to my email account. I'm not having sign in trouble with IE nor am I having trouble signing in on my laptop with either Firefox
-
Can I connect an Audigy 2 front panel to an X-Fi?
I have an older Audigy 2 Platinum with the front panel and an X-Fi Titanium Fatalty Pro card. I'd like to connect the front panel if possible because I don't think Creative even makes the front panels for the X-Fi cards anymore and they were always k
-
Can i change tabIndex order in run time
iam giving tabindex order. some swf file loading runtime than can i change tabIndex order. if possible how
-
I need help to re set QuickTime player as my default internet Video Player
Does anyone know about QuickTime Player 7 10.0? I have a Real Player software Program that is set as my internet default video player, I want to change and re set my internet video player as my default QuickTime Player, I don't know how to change and