Create Change Request and Assigned Transaction Button in Solution Directory

These buttons are available in our sand environment, but not in production. Does anyone know where these buttons came from (support pack, note, enhancement, etc.)?

Thanks Kiran,
In fact, I'm using TCode solution_manager but I don't see "maintenance optimizer".
I think it's because I have ST400 SP7 and I have to update to SP9 according to this blog [/people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer|/people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer]
Mik

Similar Messages

No popup to select active implementation cycle, while creating change Request

Hi,
I have two active Implementation projects.
While creating change requests, it is not giving any popup to select the specific cycle.
It automatically assigns to newly activated Cycle.
Please advise.
Thanks & Best Regards,
Kiran Sathyan

Hi,
if you would mention about sap solution manager version, this critical landscape transport and design before you state the problem, this would saved much time.
Now I dont think so Popup functions applicable for implentation cycles.
check out http://help.sap.com/saphelp_sm40/helpdata/en/1a/c39742042fc86ae10000000a155106/frameset.htm
and regarding closing the project cycle check this out below informations,
933705 - Closing inconsistent project cycles
Change Request Management scenario: Usual questions and known errors
question 10.
Make sure you closed open tasks, chk in tcode scma
Thanks
Jansi

Create Change Request (SDCR) with BSP?

Dear Developers,
actually I'm searching for a BSP-application to create a change request (SDCR) from the SAP Enterprise Portal for Non-SAPGui-Users. Is there something from SAP that could be used in this case?
When not, which function modules are used to create a change request in the transaction CRMD_ORDER?
Thanks in advance,
Jens Sperk

Hello Udo,
today i tried this function module out and as i feared.. it doesn't work
Can you give me some more tips or a contact to a solution manager developer who can give me some more instructions about tables und function modules that are neccessary for creating a change request from web (enterprise portal). It's very difficult to debug this terrible source code
I think that soon there will be a huge demand for web based change management. This should be part of a next patch (I hope so). It's very hard to convince a non-SAP Gui-User from this practice to handel change requests.
Best regards,
Jens

Creating Change Request from project structure

Hello.
Have somebody maked somthink like creating Change Request from Implementation project configuration structure? I want to initiate new change request directly from busines process step in transaction SOLAR02 for example.

Hi
Change request is created via action Create change document from support desk message
so in solar02 tcode...goto issues/messages tab and create a message then
crm_dno_monitor you can create a change request as i said and all the necessary data like ..system data,ibase etc is copied to ur change req from support message .
Regards
Prakhar

Error while Creating a request to assign PD profile

Hello Experts,
I am trying to create a Change request to assign only the PD profile to the user .
However when i submit the request i get an error message "Select at least one role".
I am not sure is it mandatory to select any role even when you just wish to assign the PD profile.
For Auto Provisioning by system i have provisioning type as Combined provisioning type as position.
I am currently on GRC 5.3 SP16.
Regards,
Pranab Singh

now its working fine. iam getting that error due to odbc connection.now i checked callinterface then it will working fine.
thnks for your reply

Report for Support Message, Change Request and Change in one overview?

Is there a report that shows the relation between the support message, change request and the change in one overview? I am already aware of the Change Management Reporting via SOLAR_EVAL, but this does not show the whole document flow in one overview.
The incident message processors want to have a quick overview of the status of the changes that are created on the basis of the support message.
If there is no report, could you point me in the right direction... Do I have to create a query or are you using BW for service desk/charm reporting?

Hi
chk te sap note
[Note 1466131 - ChaRM Reporting: Performance of data update|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1466131]
jansi

How to create change request

HI,
how to create change request for a program and how to compare versions ? how to release the task ? where we create change request ? how to transport it ? who will transport ?
In real time who creates change request ? developer or Team leader or Basis mainly in supporting project ?

The Change Request is that request when you do changes or create a program or configuration in the system. The system will automatically popu with the change request pop box , when you can give request name as defined by the system or can give your own request name with heading of what changes you have made while customization. The system will generate a request number and you save it. (e.g.:- SEDE-2785467) SEDE- means the Clients System name then followed by the system generated request number.
Now when you want to release the request you have to use the T-code SE10 where you can see the requests under the heading modifiable or released. Go to the modifiable option. Each request will have again an internal request number. First you have to release the internal request and then release the external request number. This will in turn released by the basis guys thru the T-code SM64 in a group when all the requests are pooled from different users.
The task is nothing but the what task you have performed while customizing the client system and the heading name which have given it for that task and generated a request for that task.
regarding your last question, change request is usually created by the developers or team leader. But the transporting is mostly done by basis.
regards
vivek
please reward points if this helps

Create Change request in background ChaRM

Hi All,
My requirement is to create Change request in mass in background. Is there any function module or BAPI which can be used for this purpose. I am looking to create Ur*ent correction, Normal_correction as well as administration changes with this method.
Regards,
Smita

I could able to create a CR and do my POC with the help of below function module.
SOCM_CHANGE_REQUEST_CREATE_RFC
Now I can built program to make CR of different type on top of it.
Thanks
Smita

CHARM - Ibase while creating change request document

Dear All,
When we open the transaction, crmd_order to create change request, the ibase / component came by default as 0 / 0. I want that field to be blank, so that we can make that as mandatory field.
regds,
CB

Hi Yunus,
Your probably have changed the transaction type SLFN to a the customer namespace Z or Y. If this is the case you MUST also "Define Mapping Rules for Copy Control".
Goto SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Change Management -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management -> Define Mapping Rules for Copy Control.
Once at this point in the IMG make a copy of SLFN -> ZLFN. This will resolve your problem.
Kind regards,
Latief

Restrictions belonging relation between Change Request and Corrections?

Hi all,
In standard change process I only can create one change document (correction) to one change request.
Releation 1:1.
Is there a technical restriction belonging the relation between the change request and the corrections?
Does anyone has experience with a 1:n relation in the change process?
Thanks for your help in advance.
Regards,
Alex
Edited by: Alexander Barth on Mar 16, 2009 11:24 AM

Hi Prakhar,
what you described is a process-restriction. It is not a technical restriction.
E.g.: I have a change belonging BI. Therefore I have to change things in BI and ERP 6.0. Why not using one change request with two corrections? One for BI and one for ERP 6.0.
So you are right if you want to create for that situation two change requests. There is no relation between them. How do you control them?
Administration and documentation is important. But it should be useful.
And I am able to set up more than one corrections to one change request technicaly in SolMan.
But is there a deeper technical restriction inside which raise problems later?
For me it seems that SAP wants that a 1:1 relation is used. But why?
Does anyone have an idea?
Thanks.
Regards,
Alex

Configuring BW to Report Change Requests and Change Documents

We upgraded to Solution Manager 4.0 on DB2 and need to extract the Change Request and Change Document tables to BW for reporting. We know that there is an internal Transaction Monitor, but we need to also report using BEx Analyzer for users who will not log into Solution Manager.
We found one table CRMD_ORDERADM_H for some Change Request fields, but cannot find the tables for the rest. Does someone know the tables where these fields reside? Thank you.
CHANGE REQUEST
Screen Name Table
Priority
Category
Description CRMD_ORDERADM_H
Sold-to Party
Requester COMT_PARTNER_TO_DISPLAY
Change Manager
Change Advisory Board
Ibase
Product
Subject
External Reference CRMD_SALES
Date
Change Request ID CRMD_ORDERADM_H
Decision Date
Implementation Date
Time of Entry
Change Request Log
Description of Change
Change Request Status
CHANGE DOCUMENT
Screen Name Table
Change Document ID
Status
Description
IT Operator
Implementation Date
Time of Entry
Overview

We upgraded to Solution Manager 4.0 on DB2 and need to extract the Change Request and Change Document tables to BW for reporting. We know that there is an internal Transaction Monitor, but we need to also report using BEx Analyzer for users who will not log into Solution Manager.
We found one table CRMD_ORDERADM_H for some Change Request fields, but cannot find the tables for the rest. Does someone know the tables where these fields reside? Thank you.
CHANGE REQUEST
Screen Name Table
Priority
Category
Description CRMD_ORDERADM_H
Sold-to Party
Requester COMT_PARTNER_TO_DISPLAY
Change Manager
Change Advisory Board
Ibase
Product
Subject
External Reference CRMD_SALES
Date
Change Request ID CRMD_ORDERADM_H
Decision Date
Implementation Date
Time of Entry
Change Request Log
Description of Change
Change Request Status
CHANGE DOCUMENT
Screen Name Table
Change Document ID
Status
Description
IT Operator
Implementation Date
Time of Entry
Overview

SCSM/SCO - Create Change Request Published Data Not Set

In System Center 2012 - Orchestrator, created a runbook that creates a change request using the Create Change with Template object. When the runbook runs, the change request is created in Service Manager however the objects published data is empty.
I have search online on this error but I have not been able to find the cause of the problem.
Does anyone know why the published data is not being set?

NOTE: I tried to include screen shots, however I am unable to until my account can be verified, sorry.
My test runbook contains two objects, Create Change with Template and Append Line.
Create Change with Template is configured with:
My Service Manager connection
Class is set to Change Request
My specific template name
Fields includes ID which is set to CR{0}
NOTE: The SM Change Request template is a duplicate of the Minor Change Request with a few modifications including updates to the Title and activity, which includes a Runbook Automation Activity.
The Append Line object writes the ID, GUID and Title to a text file.
When I run the runbook, the Change Request is created in SCSM, yet the ID, GUID and Title are empty, see output file below:
ID =
GUID =
Title =
I am expecting the GUID to be set so I can create a relationship between the change request and another object in my production runbook.
As soon as my account is verified, I will reply with screen shots.
Thank you for your help.

Create change request

Hi,
I have program which change data in tables by the user .
when the user save his change i want a popup like in sm30 that will ask him to create change request.
his there any fm that will do this or something else??
Thanks.

If an Object needs to be transported from one server to the other then we need a Workbench Request/Customising requests depending on the requirement ie configuration or ABAP related developments.
If I am not wrong you intend to generate a number so that you can keep track of changes that were done and not to move from one server to another server.
In such a case just explore if you can generate an external number range and generate one NUMBER each for every change in the table using some wraper program and storing it in a table.
For generating a number you can use
CALL FUNCTION 'NUMBER_GET_NEXT.
Just an idea,not sure how far it is feasible
K.Kiran.

Create handling units and assigning them as Packing Proposal for Sales Orde

Hi Friends
How to create handling units and assigning them as Packing Proposal for Sales Order Items in the background.
Could you please help to provide Input Parameters for BAPI_HU_CREATE for sales order OR is there any other program creating and assigning them to Sales Order line Items.
Thanks in Advance.
SR

Hi Friends
I created Handling Units with BAPI_HU_CREATE , Pack materials with BAPI_HU_PACK in to Handling Untis and assign handling units to sales order with BAPI_HU_CHANGE_HEADER . But These BAPIs are not doing packing sales order line items in to handling units . I have to go sales order and do sales order line item packing by clicking packing button.
Could you please help on how to do packing Sales Order Line items in the background with BAPIs.
Thanks in Advance.
SR

Changing of iBase in Change Requests and Corrections being processed

Good day!
After going SP18 with Solution Manager our iBase component system has gone "mad": number for productive ERP-system has changed several times.
Because of this change, a number of already approved change requests and corrections in processing can't be modified correctly. I can't change their status by regular operations from system document. Multiple correction/ change request change also won't work. And I can't change the iBase component in this documents, because the field is read only.
How can I close all Change Requests and corrections with old iBase component number?
Is there a way to change the iBase number in already approved Change Requests and Corrections, so i can perform operations with this system documents.

Hello Raguraman!
Thank you for your answer.
Anyway I implemented the note to which you refer, and still can't change iBase component in corrections and change requests which are in process. The "iBase/Component" field is still read only and contains components which do not exist anymore.
Do you know how can I change this values?

Create Change Request and Assigned Transaction Button in Solution Directory

Similar Messages

Maybe you are looking for