Create characteristics t code CT04

Dear,
In t code CTO4 when I m creating characteristics , under value assignment there are two radio selection
1 Single-value
2 Multiple value
what is the significance of it. ??? which one I need to select , so that I can use this characteristics to my measuring point or counter.
One more field is there template when I select my data type and char predefine template is automatically selected. & this template is applied to my respective measuring pt and doc.
and I m facing problem to enter reading in measurement doc.
e.g
I have a characteristics with unit NO , data type numeric and no of char 10
but in measurement doc I m able to enter only 4 digit value . to enter further digit I has to delete template.
why it is so ???
Thanks,
Prasad.

Hi,
In CT04 the Single & Multiple values means.
For Example in characeteristics if you want to maintain only one reading for characteristics then select the Single value,If you want more than one value for the Characteristics then select Multiple values.
For Example say your characteristics is Speed.you are assign this characteristics to class Motor.
When you attach this class to Equipment say if only one value exist for Speed characteristics for all equipment then specify single value.or if more than one value then specify as Multiple alue.
for Motor A the Value of Speed characteristics is 1500 Rpm
for Motor B the Value of Speed characteristics is 1500 Rpm
for Motor C the Value of Speed characteristics is 1500 Rpm
In this case assign as Single value.
If for Motor A the Value of Speed characteristics is 1500 Rpm
for Motor B the Value of Speed characteristics is 1200 Rpm
for Motor C the Value of Speed characteristics is 1100 Rpm
In this case specify as Multiple value & Maintain in characteristic when you cretae the value in Equipment the 3 option will show to you.from that you can select.
For the 4 digit entry & template.
Check your User profile what template it has given.check with Basis Consultant & ask him to assign the proper user profile to user id.
In menu bar go to System -- User profile-- Own data & check the Default values tab.Check for the template there.
Regards,
Raj

Similar Messages

Create Characteristics, Data Type - Currency

Hi All,
I am trying to create characteristics in transaction CT04 for our PO release strategy.
Data type is Currency. After giving all required details when I press enter the value range becomes NNNNNNNNNNNNN.NN. So I am unable to select value in release strategy classification tab.
Does anybody have any idea that why values are getting converted to NNNNNNNNNNNNN.NN.
Is any configuration missing?
Is the problem with template?
Regards
sapmm1234

I have done the following settings:
Charateristrics PO_Value
Valid from Today Date
Decription Total Net Order Value
Status Released
Data Type Currency
Number of Class 15
Decimal Places 2
Currency QAR
Template I ahve not selected anything but defaults it is taking NNNNNNNNNNNNN.NN
Even If I delete this when I press enter It is taking NNNNNNNNNNNNN.NN
Multiple values & Interval Values allowed
Additional Data:
Table CEKKO
Field GNETW
Not Ready for Input Checked
Unformatted Entry Checked
Propose Template is not checked
Values
<= 2500
> 2500
<= 10000
> 10000
After giving this value when I press enter all values becomes
<= NNNNNNNNNNNNN.NN QAR
> NNNNNNNNNNNNN.NN QAR
<= NNNNNNNNNNNNN.NN QAR
>= NNNNNNNNNNNNN.NN QAR
So I could not select any value in RElease strategy --> Classification tab
Any Idea why Value are getting converted into this format.
Regards
sapmm1234

Batch create characteristics(ct04)

HI all,
I need to create batch characteristics from transaction ct04.
i have tried bapi_character_create but i am unable to create with it.
tried BDC when i try to recording can't see the Value tabs in it.
please give some suggestions, how can i do this.
if anyone have done this before, please forward sampel code to my email address
[email protected]

Hi,
In CT04 the Single & Multiple values means.
For Example in characeteristics if you want to maintain only one reading for characteristics then select the Single value,If you want more than one value for the Characteristics then select Multiple values.
For Example say your characteristics is Speed.you are assign this characteristics to class Motor.
When you attach this class to Equipment say if only one value exist for Speed characteristics for all equipment then specify single value.or if more than one value then specify as Multiple alue.
for Motor A the Value of Speed characteristics is 1500 Rpm
for Motor B the Value of Speed characteristics is 1500 Rpm
for Motor C the Value of Speed characteristics is 1500 Rpm
In this case assign as Single value.
If for Motor A the Value of Speed characteristics is 1500 Rpm
for Motor B the Value of Speed characteristics is 1200 Rpm
for Motor C the Value of Speed characteristics is 1100 Rpm
In this case specify as Multiple value & Maintain in characteristic when you cretae the value in Equipment the 3 option will show to you.from that you can select.
For the 4 digit entry & template.
Check your User profile what template it has given.check with Basis Consultant & ask him to assign the proper user profile to user id.
In menu bar go to System -- User profile-- Own data & check the Default values tab.Check for the template there.
Regards,
Raj

How to create an address code for PO delivery address?

Hi Guys,
How to create an address code for the delivery address in the purchase order? Please explain me with details.....
Thanks
Raja

delivery adress records can be created with transaction MEAN.
the number is purely internal.
In ME21N you can then search by name (you will certainly not know the number)

Creating a tax code in FTXP I can't fill in an account for NVV

Creating a tax code in FTXP,
for my tax code I've filled in a Tax Percent. Rate for Transaction Key NVV but SAP doesn't allow me to fill in an account for this
Transaction Key in the tab tax accounts.
What cuold it depend on?
Thanks

Hi,
Well NVV account key in sap standard is a non deductible key and it would not be display in OB40 for account assignment.
If you see NVV properties in OBCN it will display check box ticked for not deductible and posting indicat. 3.But if you want to use it for tax posting untick that check box and change posting indicator to 2.
Then it will show that key NVV in OB40 and let you assign gl for this key.
Regards
Arun

Error while creating inbound process code

Hi gurus,Iam creating a custom idoc.
800 -> sender
810 -> Receiver
i have completed outbound processing on 800.
On 810, completed following steps for inbound processing.
1.) I have added my Inbound FM in BD51.
2 ) Assigned my FM to Message type and Idoc type in WE57.
3 ) When adding my FM to process code in BD67, it is showing error that
Entry ZSATPC does not exist in TEDE2 - check your entry.
{ zsatpc is my custom process code }.
4) While Creating Process Code in WE42 with options [processing with ale service / Processing
by FM] and saving it is giving error that
" " is not a valid language.
And when I saw help (?) regarding this error, the following text appeared in a window.
Diagnosis
A key with language "" "" was specified for table "EDE2T". This is not a valid language.
This applies to field "LANGUA"
System Response
The system rejects the key.
Procedure
Enter a valid language. This is usually the language you logged on in.
You logged on in language "EN".
Table T002 contains a list of valid languages.
Please solve this error. Give me steps to create inbound process code.
thanx in advance. Hoping replies soon........
Satish.

Dear Satish,
Very peculiar. The language should come from your log on language. Try to login into the system again. Call we42 again and see if it works.
Regards, Rakesh

Create Characteristics for CO-PA

Hi Experts,
I am facing another problem while creating the Characteristics BZIRK (Sales District) with reference to table VBKD. Currently this characteristic BZIRK is available in the system but this is created with reference to table KNVV. While creating characteristics BZIRK again with reference to table VBKD, I am receiving message saying Field BZIRK is already defined as Characteristics, chose another name. Then I tried to delete this characteristics BZIRK but I am receiving the message saying Field BZIRK does not have set system type CUS. I then further continued but now the system is giving error saying Field BZIRK is a technical/fixed field -> Choose another name.
Please suggest:
1) How to create new characteristics BZIRK again with reference to table VBKD? We want to use characteristics BZIRK created with reference to table VBKD in our operating concern instead of characteristics BZIRK created with reference to table KNVV.
Also we want to create characteristics VKBUR and VKGRP with reference to table VBAK to include in our operating concern. Currently these characteristics are available in the system but are created with reference to table KNVV.
Regards,
Bijay

Hi Experts,
I am facing another problem while creating the Characteristics BZIRK (Sales District) with reference to table VBKD. Currently this characteristic BZIRK is available in the system but this is created with reference to table KNVV. While creating characteristics BZIRK again with reference to table VBKD, I am receiving message saying Field BZIRK is already defined as Characteristics, chose another name. Then I tried to delete this characteristics BZIRK but I am receiving the message saying Field BZIRK does not have set system type CUS. I then further continued but now the system is giving error saying Field BZIRK is a technical/fixed field -> Choose another name.
Please suggest:
1) How to create new characteristics BZIRK again with reference to table VBKD? We want to use characteristics BZIRK created with reference to table VBKD in our operating concern instead of characteristics BZIRK created with reference to table KNVV.
Also we want to create characteristics VKBUR and VKGRP with reference to table VBAK to include in our operating concern. Currently these characteristics are available in the system but are created with reference to table KNVV.
Regards,
Bijay
For any new characteristic you are creating should start "WW". For example Create new characteristics for BZIRK by renaming as WWBZK and giving Origin table VBKD and origin field BZIRK
Refer IMG documentation for Maintain Characteristics in SPRO for further clarification

Vendor 27672 has not been created for company code 6200

Hai,
I am trying to post a invoice against a Scheduling agreement.
The scheduling agreement has vendor as 27672 and comapny code as 6200 in the header data when i look into ME33L.
When i trying to post an invoice fo the schedulig agreement using BAPI_INCOMINGINVOICE_CREATE , it is thowing the error "Vendor 27672 has not been created for company code 6200". which i am not able to resolve, as the scheduling agreement is raised against that vendor.
when i tried to post the invoice manually using MIRO, there was a POP-UP saying there " PO vendor is not an invoiceing party. enter the invoicing party." where i was giving 27673 which is the alternate payee for this vendor. It is accepting and i could post the invoice succesfully.
However, the same is not available in the BAPI_INCOMINGINVOICE_CREATE that i am using.
Is there any way that i can enter the Invoicing party as i did it when i was posting it manually or is there any other way that i can resolve the issue.
Thanks,
Upender

Hi
Go to XD01 and enter the same customer code that you have now and enter the required company code and sales org, dist. chnl and division and enter the required details and save.
Regards
Madhu
Edited by: Madhu Naidu on Sep 19, 2011 6:46 AM

Creating Cross Company Code Vendors/Customers.

Hi All,
I'm trying to understand how to create cross company code Vendors and Customers. I've already established the link with configuring OBYA. What I'm not clear is on which company code I should be creating the vendor and customer.
We have two company codes, 2100 & 0980. CC 2100 has the central bank tha pays invoices for CC 0980. I have two issues.
1. What kind of configuration is needed to accept incoming payments into CC 2100 House banks and lockboxes?
2. For intercompany activity between 2100 & 0980 how are the vendor and customer master records set up? I know there needs to be a vendor on the customer master and a customer on the vendor master.
So for 0980 acting like a vendor for 2100 I'm assuming the vendor number for 0980 is set up as a 2100 vendor.
The same is true when acting as a customer. The difference being is that this vendor entered into a field on the customer master and the customer number is entered on a field in the vendor master.
I'm missing how the Vendor record, if created on Company Code 2100 gets linked to Company Code 0980.

For SAP to 'know' that a particular vendor / customer master records represents a specific company code, all these needs to be linked to the same 'company'.
Companies are maintained in T880 (IMG : enterprise structure -> definition -> Fin Acctg -> Define Company
Company code is linked to a company in the cocode config. IMG enterprise structure -> Assignment -> Fin Acctg -> Assign comp. code to company
And finally, the Trading Partner field in the Customer/vendor master is where you assign the company to the cust/vendor.
This setup will eventually allow you to consolidate interco A/R, A/P, etc.. if you need to but is not necessary for the interco process to post.(although you'd want to have it rght from the get go)

How to create a transaction code for a function group with screen 100 as st

Hello ,
I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
Customer asked me to create a transaction with the screen 100 as the starting screen.
Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
[ It is not a module pool program ].
Thanks
Prashanth.
Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
Edited by: Rob Burbank on Jun 2, 2009 11:49 AM

Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field:                               Value
D_SREPOVARI-REPORTTYPE                RW
D_SREPOVARI-REPORT                        ZPCA
Save and transport accordingly.

HOW to create new transaction code in SAP

Dear All
Thanking you for your cooperation
Pls help,
how to create a new transaction code and link with the process??????????
Thanking you

Hi
you can crete Transaction code in Transaction SE93.
To create a transaction code:
Enter a transaction code (up to 20 characters).
Choose Create.
A dialog box appears. Enter a short text and choose the transaction type.
The transaction type can be as follows:
Dialog Transactions
Report Transactions
Object-Oriented Transactions
Variant Transactions
Parameter Transactions
In a report transaction, you use a transaction code to start an executable program (type 1). An executable program usually has three steps - data entry (selection screen), data processing (often using a logical database ), and data output (list).
To create a report transaction, use the Transaction Maintenance transaction (SE93). Once you have entered a transaction code and short description, choose transaction type Program and selection screen (report transaction).
When you define a report transaction, you can specify the selection screen and variant with which you want it to start.
You can also protect the report transaction against unauthorized use. To do this, enter the name of an authorization object in the corresponding field.
Dialog Transactions
In a dialog transaction, the flow of the program is determined by a sequence of screens. The screens that are called within a transaction should belong to a single ABAP program, usually a module pool (type M program).
To create a dialog transaction, use the Transaction Maintenance transaction (SE93). Once you have entered a transaction code and short description, choose transaction type Program and screen (dialog transaction).
You can create transaction codes for Custom query;s created using SQVI also
Thanks & Regards
Kishore

Create New Tax code and condition types

hi experts,
i want to create new tax code V10 and new condition types ZWKT and ZSTX under V10.
i have a requirement that is create service general Purchase Order with following tax conditions
1. Work Tax 4% on 70% of Bill Amount.
2. Service Tax 12.36% on 33% of Bill Amount.
while creating PO when user select ZWKT and ZSTX, system should calculate 4%( on 70%) and 12.36% (on 33%) and place the tax amount on relevant fields automatically.
( i tryed with tcode:FTXP and created tax code(country key: IN, procedure: TAXINN and taxtype: V input tax) but problem with assigning condition types and calculation procedure)
please help me in this issue (step by step).
Thanks.
srinu.

Hi,
Here you have to create two dummy condition type for Base Value. One for Service Tax and other one for Work Tax.
Then create two condition type for Work Tax & Service Tax.
Ex : Work Order Base Value condition type is "A"
Service Tax Base Value condition Type is "B"
Work Order Tax condition Type is "C"
Service Tax condition type is "D"
In Pricing procedure just add all the above condition type as below
Both Base Value condition type will be calculated from System Base Value & in FV11 maintain the Base Value percentage against the Tax Code & Condition Type as per ur req (70% for Work Tax & 33% for Ser Tax)
Work Order Tax & Ser Tax will be calculated from respective Base Value. In FV11 just maintain the tax %.
Sangram

Create new tax code

Hi,
How to create new tax code for Import tax + 2 % CST with the following details:
Quantity                                        Basic rate                      Amount
15595                                             0.50                               7798
Custom duty BYP                           4%                                 292                 NCR
                                                                                8090
Basic Excise duty                           10%                                809                   CR
Edu. Cess on BED                            2%                                16                     CR
Sec.Ed. Cess on BED                       1%                                 8                      CR
                                                                                8923
Edu. Cess on TOT 2% BYP                2%                                23                    NCR [29280916+8]*2%
Sec.Edu. Cess on TOT 1% BYP         1%                                 11                    NCR [29280916+8]*1%
                                                                                8957
CST                                                       2%                              179                      NCR
                                                                                9136
Thanks & Regards,
Swati

Hi,
What is the tax procedure you are using? Is it TAXINN? If yes then you need to define condition Types in OBYZ and mainatin the same in TAXINN,
in Create Tax Code E1 and in FV11 maintain Tax rate for this Tax Code against Condition record of Excise and CST.
Hope this helps!!
Br,Vivek

Error in posting :First create the jurisdiction code at state level ()-URGE

Hi,
We are getting ERROR "First create the jurisdiction code at state level ()" at the time of postiong . This is HST calculated on benefit that we are trying to post;;
GL account tax category is defined as '<' in FS01 and posting without tax allowed is not checked. Are we missing aything;
Regards,
Neelima

Hi Neelima,
Tax Jurisdiction code is related mainly to US.
Please check the if tax jurisdiction code is maintained in SPRO > Financial Accounting > Financial Accounting Global Settings 's basic settings part. If not, maintain the same for the state. This might help you.
Best Regards,
Venkat.
Edited by: Venkateswara Sarma Bhamidipati on Jan 1, 2011 4:45 AM

How to create an Undefined Code Combination from API? (Urgent)

Hi All,
I used the following API to create the code combinations in a Inventory custom form.
SELECT CHART_OF_ACCOUNTS_ID INTO :PARAMETER.CHART_OF_ACCOUNTS_ID
FROM ORG_ORGANIZATION_DEFINITIONS
WHERE ORGANIZATION_ID = :PARAMETER.ORG_ID;
FND_KEY_FLEX.DEFINE(
BLOCK => 'XX_MRN_TRX_HEADERS',
FIELD => 'TO_ACCOUNT',
CODE => 'GL#',
APPL_SHORT_NAME =>'SQLGL',
NUM => ':PARAMETER.CHART_OF_ACCOUNTS_ID',
ID => 'TO_ACCOUNT_ID',
VRULE => '\\nSUMMARY_FLAG\\nI\\nAPPL=SQLGL;NAME=GL_NO_PARENT_SEGMENT_ALLOWED\\nN\\0GL_GLOBAL\\nDETAIL_POSTING_ALLOWED\\nE\\nAPPL=INV;NAME=INV_VRULE_POSTING
nN',
REQUIRED => 'N',
DINSERT => 'Y',
VALIDATE => 'FULL',
USEDBFLDS => 'N');
This creates the correct ccid if the combination is already available in GL (gl_code_combinations_kfv), But when its a new combination it returns '-1'.
How can I create an Undefined Code Combination from API in custom forms?
If any one one can help me on this it'll be a great help.
Thanks

Solved by Using FND_FLEX_EXT.GET_COMBINATION_ID.
Thanks

Create characteristics t code CT04

Similar Messages

Maybe you are looking for