Create Cost Center relationship usin SAP-PD

Hi all,
SAP_PD is allowing to deal only with O, S and C object. How we can create new relationship to Cost Center (K) using SAP_PD.
Any ideas?
Thanks,
Oleg
Edited by: Oleg Sokolov on May 26, 2010 2:26 PM

You can 'start' an SAP_PD service with an Position, Job, or Org Unit. But you can update ANY relationship to that object (even cost center). Play around with it a bit and I'm sure you'll stumble up on the solution.
Derrick Banks
Banks & Company, LLC

Similar Messages

Configuring ISR Scenario SRK1 (Create Cost Center Request) with Adobe forms

Hello,
I am trying to configure the ISR scenario SRK1 (Create Cost Center Request) with Adobe Interactive Forms.
However when I am trying to generate the form, it is giving an error TR015(Object can only be created in SAP package)
Apparently by default it tries to create form Adobe form ISR_FORM_SRK1.
Even if I change that name to ZISR_FORM_SRK1, it tries to create interface ISR_IF_SRK1 which is in SAP's namespace and I cannot generate the form. I cannot seem to be able to force SAP to use a different Interface name. The field for the interface is greyed out and is not picked up
Am I missing any step or is there any fix to this problem?
regards,
Atul Kulkarni

Hi,
From the config it picks the formscenario(SRK1) and prefixes the same for adobe form.
I think the best option would be to copy the Stnadard form scenario to ZSRK1 and proceed. This copy can be done from the config 'Manage Form Scenarios' under this select the option 'Copy form scenario'. This copies the entire config from SRK1 to ZSRK1.
Regards
Srikanth KV

To make profit center as mandatory while creating cost center

Hi,
what is the procedure to make profit center as mandatory while creating cost center.
Thanks and Regards
Boppana

Hi Boppana,
There are two possibilities to have the profit center field as
mandatory in KS01 (cost center creation):
a) You can modify message number KS096 to "Error" via OBA5.
   Thus, the users would no be able to save a cost center without enteri
   a profit center.
   Depending on Your release you can make KS096 modifiable by
   implementing note 486781.
b) You can directly modify the field via SE51 (SE51 -> Element list ->
   Rider Special Attributes) to mandatory entry.
   But in order to do this, You will need an SAP developer and
   object key (available via OSS ).
I would strongly advise method a). It's simpler and you don't
have to modify a SAP object (it would be a modification of the standard)
br, Guido

Is there any config for plant-cost center relationship

looks like our new cost center is not defaulting on the PO accounting document. Is there someplace I should have set-up a plant/cost center relationship?
Thanks in advance
Satya

Hi Satya,
You cannot directly assign a Cost Center to a Plant. But indirectly yes. A Cost Center is assigned to a Profit Center, a Profit Center is assigned to Material Master and the Material Master to a Plant.
Hope this clarifies.
Regards
Sridhar

Cost center relationship with department

Hi experts,
I have one question to ask about cost center relationship.Let say one department use only one cost-center. Is it I have to key-in the relationship between department and cost-center only or I have to key -in all the position in that department with the cost-center.If I don't keyin the relationship between position and cost center, how about the report. It will automatically appear or not.

HI MJ,
Please assign the Org Unit to a Cost Center using A011 Relationship through IT1001.
Secondly, the principle of Inheritance works here.....i.e.
IF you have assigned a O-K relationship at the Org Unit Level, all the reporting Org Units & Positions will inherit the Same Parent Cost Center........except in cases where the O-K / S-K Relationship is changed for any other org Units...or Positions... in such cases, the reporting org units or positions will inherit that.....
Cost center assignments are inherited along the organizational structure.
Hope it is clear...
Good Luck !!!!
Kumarpal Jain.

Business area is mandatory when creating cost center

Hi ,
I have an error while creating cost center. business area is a mandatory field when I am trying to create cost center. I want to make it ( business area ) optional . How it is ?
Thanks

hi
Go to OBC4 select your Field sataus varient in that select G004 ,double click on G004 in that Additional Account assigenment Select Business Area As Optional.it will work
if your problum is solved pls assign me points
Regards
ramana

What is the T-Code for creating Cost center - profit center standard hierar

Hi,
What is the T-Code for creating Cost center - profit center standard hierarchy.Please provide me the T-codes.
Thanks

Hi Supriya,
Create / Change Cost Center Standard Hierarchy - OKEON
Display Cost Center Standard Hierarchy - OKENN
Create Profit Center Standard Hierarchy - KCH1
Change Profit Center Standard Hierarchy - KCH5N
Display Profit Center Standard Hierarchy - KCH6N
Srikanth Munnaluri

Error in create cost center

ks01 transaction code i used while create cost center first error is no standard hierarchy so i used kkop code then i gave hierarchy name gave enter but error is hierarchy name does not exist.-->how to solve this error can any one answer this ?

Hi,
Create Standard Hierarchy in OKKP t.code and active cost components for your controlling area
Example: Active
Cost Centers : Component Active
Order Mgmt: Component Active
Now asssign Standard Hierarchy during creation cost center (KS01)
Regards,
Biju K

Profit Center Mandatory when creating Cost Center

Hi,
How do we make Profit Center Mandatory when creating Cost Center, I remember doing this and cannot recollect as to how i did this in a previous version 4.0b.
Pls advise how to do the same in ECC 5.0 and higher..
Thanks,
Praveen

Dear Praveen ,
First u will creat PCA then u will acitvit .
while creating cost center u have to give profit cnenter accounting .
ur not enter pca aacoutno then it will give the error message account is activted but profit cneter account not given
Regards
Suresh

Create cost center

Dear sir.
Im creating a cost center, on " create cost center: basic screen" - profit center, I choice a profit center I created before, but it says: " Profit center VNMH/100 does not exist" (VNMH is controlling area), and I check again, in fact that cost center 100 is created.
help me deal this problem.
Thanks,
Hangvt

Hi,
you have to make sure that
1. the profit center created is actived and is valid for the whole time range of the cost center
2. the company code of the cost center has to be activated in the profit center master
3. the company code has to be assigned to the same controlling area like the profit center controlling area.
cheers,
daniela

Error while creating Cost center

Hi,
After creating Cost center in KS01 when i try to save it,
it is showing error that "The Persona Responsible say example BORISA01 not Valid".
How to correct it?
Thanks
Swetha

Hi Swetha,
In standard setup, this field is set as required but usually this is not setup with a validation. There is not even an F4 option to search for available users.
However in order to find where this issue is arising please reference the 5 Digit Error code that appears.
Debugging via "/h" in the transaction field may be required to see what validation has been setup if custum code has been entered.
This field is not connected to a database table for lookup it is simply an character field where you can enter any value.
You could also check the 5 digit error code. If this is a custom error you may be able to change it to a warning rather than an error message via the Custum Message Handler. This should then allow you to bypass the validation if one is setup and you should be able to enter any value.
Kind Regards,
Brendan

Cost center relationship in PCH logical database

Hi Experts .
According to what I knew theoretically ,
External objects such as cost centers or users do not store data in the PCH logical database .
But I created a position and Idid a cost assignment using relationship A11 to a cost center and went to SE36 and ran PCH for the selection of current plan version and object type K and object id of the cost center .
After running for the evaluation path KOSTDIUP ( Account assignment usage ) , I could see the relationship of cost center with the earlier created position .
So if relationships of cost center are not supposed to be in PCH logical database , then how come I can see the above result ?
Thanks
Rishabh

This logical database generally enables you to report on all HR infotypes. However, you are advised not to use this logical database unless you want to report on Personnel Planning data.
The Organizational Management uses the PCH logical database
so S-Position is an object in OM, you can see the relationship.
correct me if i am wrong !!
regards,
mohammed

Org Unit to Cost center relationship issue

Hi All,
When I assign a Cost center to an Org Unit, i dont have any issues and got created. But when I assign the same Cost center to a different Org Unit, it delimits the previous Org relationship and creates the new one.
I checked the Relationship A011 time constraint and it is 2 which is with gaps.
This is strange and should not work in this way.
Thanks in advance.
Cheers
Vijay

Thanks a lot guys.. I found the answer...
Cheers
Vijay

Cost center locked but SAP allows for PO creation

Dear All,
We have a requirement such that whenever a cost center is locked, system should not allow users to create PRs / POs for locked cost center. I tried it through authorization control, but in MM there is no object for cost center.
Could experts tell me the way in which this control can be acheived.

Hello
We have a requirement such that whenever a cost center is locked, system should not allow
users to create PRs / POs for locked cost center. I tried it through authorization control, but in MM there is no object for cost center. Could experts tell me the way in which this control can be acheived.
Please try out with some enhancement and let us know if your requirement can be met or not.
I think the appropriate Exit would be MM06E005\MM06E007. Please reach out to a ABAPer
and put a simple logic in the code which would prevent the creation of PO when the COST CENTER are locked.
If the above suggestion is not working then you can put up the logic when the PO are on the
verged of being released after creation. In this way the PO belonging to locked Cost Center will not be released at all.
MMFAB001 (User exit for generation of releases)
[MM Enhancements|http://sap.niraj.tripod.com/id63.html]
Regards,
Sarthak

Report Painter library for Classic GL for creating cost center report

Hi,
I am sure everyone knows what my query is.
I have tried using library GLTO, GLT1, GLT2, CCSS, GLFUNCT but when i am trying to create/execute report using report painter for cost center but no records are selected. I have checked the settings they all are correct as i have run it for another company code, secondly for GL reports using report painter there is no such error.
Regards,
Mohammed Ali Khan.

Hi Christian,
So for the late reply... I already check the Scenario FIN_PCA in assigned to our Ledger...
Are there other ways to generate my report on the report painter? ( Profit center as Column, And GL account and cost center on the row)
Thanks,
JM

Create Cost Center relationship usin SAP-PD

Similar Messages

Maybe you are looking for