Create Currency Decimal Places

Hi Experts,
Is it possible to create our own currency decimal places? In my configuration(OY04) only available standard decimal places 1, 3,4 & 5. now I need decimal place 2. e.g. I want to show amount as 101.26
Regards
VS Rao

Hi Rao,
refer to note 137626.
Regards,
Greta

Similar Messages

Currency Decimal Places setting restore

Hi Experts ,
Unfortunately we have changes the setting for currency decimal places in SPRO ==> SAP NETWEAVER ==>GENERAL SETTINGS ==>CURRENCIES ==>SET DECIMAL PLACES FOR CURRENCIES.
for Currency INR from default 3 decimal places to '4' decimal places, due to this the amounts entered in MM inforecords were changed e.g. the amount which was entered as 15.20 inr changed to 1520.00 inr, After getting reply from Fourm and the senior consultants we have deleted the INR currency from the about setting i.e.from table 'TCURX' after doing this the amounts get corrected i.e. from 1520.00 INR to 15.20 INR.
But again the same (adverse) change is being seen in amounts for MM Inforecords and SD Condition Records
If we enter a new record it shows the correct amount.
How can i correct the previous amounts. It has happen suddenly and what guarantees that this should not happen again.
Please give me the solution as early as possible. We have to Go-Live in next 2 days..
Thanks in advance
Amol

HI, anand,
SAP suggest never touch decimal places.
Regards,
Satish

Precautions for Changing Currency Decimal Places

Hi Gurus,
I am having a requirement to change currency decimal place, which is set wrong at the time of golive.I wanted to know what are the precautions i need to take for changing the currency decimal places. As per the note at the time of changing currency decimal places, we need to check is there any transactions posted in this currency. I have checked BKPF table and no transactions are posted.
1. what are all the other tables i need to check for ensuring there is no transaction posted in that currency?
2. Is there any other place we need to do this change?
Thanks in Advance
Regards,
Giri

Dear!
We also faced this problem,But I recommend
Please do check following befor chaning the currency decimals
1- transaaction data
2-Project profile currecnt setting ( OPS9)
3- Internal order budget profile setting ( OKOB)
3- funds management profile setting ( OF12)
4- All other proifle.
5-Als0 consult with other Module team/HR
Thanks
Message was edited by:
MS

Asian (JPY) currency Decimal Places Issue

HI All,
Need your help, we have a program which creates a BDC session and when the user tries to process it it throws an errror for amount in asian currencies like JPY - no decimal places allowed for currency, in the background it calls the FBB1 transaction.
The original amount is in USD however after conversion when we store it back to amount field which is of type
"glpct-tslvt" it stores the amount in JPY currency with decimal places so for example :
USD amount = 93,214. 00
JPY amount = 115,021. 86
guess the amount is stored with decimals in BSEG table, so now when we try to process the session with the JPY amount with decimals it throws an error.
I have tried the
CALL FUNCTION 'CURRENCY_AMOUNT_SAP_TO_DISPLAY'
and
CALL FUNCTION 'BAPI_CURRENCY_GETDECIMALS'
it gives me the correct value for amount so for above example JPY amount = 115,021. 86 by using the mentioned two methods i am able to get the currency in this format 11502186.00 but still has two decimal places, i think it still will not work when we process the session for FBB1.
Need your help people, appreciate your co-operation.

sorry to revive an old thread...but we are having an issue with JPY in our electronic bank statements.
the BAI format for our JPY account has for example 900 yen which according to our finance department is really 9 yen. the bank claims this is a known issue and the BAI format documentation seems to be confirming the bank's position in that the decimals are implied according to the currency code (whatever that means in SAP terms is a bit foggy to us).....
currently we wrote a custom code to suppress the last two zeros (when they are zeros) but i feel this error is caused either by a wrong setting in our currency or translation tables in SAP or something else since our feeling is that this should work right out of the box without any custom programming...any ideas???...where we shoudl start looking in our currency config....does the 100:1 or 1:1 translation ratio between JPY/USD make any difference...should we try and use a function module to convert the currency ...any ideas or hints are welcome
thanks
Ram
[email protected]

Currency Decimal places

Hello Experts,
I am unsing SRM 4.0 SP13 & standalone scenario.
At present RON currency set with "No Deciamal Places" in Currency setting. Now user wants to put 2 decimals with this currency.
In SPRO -> SAP Web Application Server -> General Settings -> Currencies -> Set Decimal Places for Currencies,
If i remove the RON currency,:
1. The system will allow 2 decimal palces.
2. Is there any impact on existing documents ( i have one docuemnt in PRD system with RON currency). If yes, how we can resolve.
FYI: The present Decimal format is 1.234.567,89.
Thanks in avance for your valuble inputs.
Regards,
Suneel Kumar.

Hi
RON which country boss. help others to do help very fast? romania and russia i could see..

Currency Decimal Places - Urgent

Hi all of you..
When earlier stage in my project , client has not told us to change the decimal places in Foreign Currency - USD.
Now client is asking to change the decimal places for 4 digits..
( Earlier 2 decimals )
Now in Global settings t.code OY06 , we are trying to change for 4 decimals , but system is changing the entire existed transaction values regd USD as for 4 decimals , data inconsistency is coming.
Is there any procedure to change the decimal places from now onwards...
Or else is there any procedure to get 4 decimals in PO..
Plss help me it is very urgent to me ..we are trying to shoot from 10 days..
Thanks & Regards
Ramki

Please read OSS note 434349 - Change of decimal places of currencies
it has instructions for your case

JPY Currency Decimal Places

Hi All
Today we noticed a difference in the way SAP handles a PO which has document currency JPY. The price displayed on screen for the PO was 790 JPY, but the value stored in the tables was 0.79. Any reason why this like this ? How does standard SAP handles such cases ?
Regards
Kasi

Hi
There are certain currencies like JPY/Yen for which amounts are automatically handled by SAP. Currency JPY has 0 decimals. Refer TCURX table for the details of decimal places for currencies.
In the case of JPY, system automatically multiplies values when displayed from table to screen and divides vice versa.
FM 'CURRENCY_AMOUNT_SAP_TO_DISPLAY' is used for this conversion.
Amount 7900 JPY on screen will be stored as 79 in SAP tables.
Also, in the case of exchange rate conversions, the rate maintained are for 1:100 to USD (ex). while other currencies would hold 1:1 conversion rate.
You can also check with FI consultants for more details
Thanks
E.Avudaiappan

Rounding Rule upto 3 Decimal Places in Tax Condition(SABRIX)

Hi,
We are Using SABRIX for Tax determination and need to round up Condition Type XR1- XR6 to round upto 3 Decimal Places.
Do we need to To Change ALT Calc Type- 301306or Alt Cond Base Value -- 16 or have to change Currency decimal Places in transaction OY04/OY03.
Kindly Suggest.
Thanks
Amit

Hi,
Tax % for customer is decided in SABRIX, Where does TaX calculated?? In SABRIX or in SAP.
Thanks
Amit
Edited by: AMIT GUPTA on Mar 31, 2010 10:54 AM

Decimal Place for Percentage

Hi,
Where do we change the number of decimal places for percentage? Currently it is set as 3places. (e.g. 1.234% change to 1.2345%)
Thanks,

Hi Shiva,
As for the link you gave, we don't want to change the currency decimal place. We only want to change the number of decimals shown in a percentage value. (such 1.2345% instead of 1.234%)
Thanks,

Query regarding decimal places for currencies

Dear all,
SAP standard allows 2 decimal points as default for any condition value. However, based on the entries in TCURX table we can set number of decimal places with reference to specific currencies.
In our system there is no entry in TCURX table against USD currency. Still the system is taking 3 decimal places against the expected 2 decimal places.
Is there somewhere hardcoded this for US or are they any additional settings impacting this? Please help
Regards,
Rajesh

Hi All,
I have been trying to set 3 decimal places. I got the reference to Note # 38881.
This is what I did:
1. Create a new currency US$ and set the decimal places to 3
2. Maintained the prices using VK11.
3. Changed the customers' sales area currency to US$
But when I created the sales order although the system determined the prices in 3 decimals i got the following information message which keeps on showing during the entire sales order creation:
Pricing error: Mandatory condition ZMAC is missing
Message no. V1801
Details are as below:
The obligatory condition ZMAC does not exist. The document is therefore considered to be incomplete from the point of view of pricing.
The cause can be, for example, that a condition record does not exist for condition ZMAC or that a field overflow has occurred when the condition rate was calculated.
Procedure
Check why the condition could not be found. Use the pricing analysis function on the pricing screen to do this. If necessary, add the missing condition manually to the document.
I believe I am missing some configuration that should be done in pricing, not sure what. As this question has been flagged answered, hope someone would be able to help me.
Thanks & Regards,
Rajesh Singh

Decimal Places of Currency

Hi
Our client has global presence and we see POs created for different currency from different regions. The requirement is, do we have a table in SAP that holds currencies with decimal places defined for them.
Thanks
Vijay

Hi
Table TCURX holds the details required by you
Thanks
E.Avudaiappan

Changing the Decimal places in the currency

Hi all
we are using the currecy SAR. Decimal places was set to 4, now that they want to revert back to 2 decimal places. i understand that by doing so they would be inconsistencies in the data allready recorded. how to avoid that?
is there any programmes / reports that would fix such inconsistencies?
any OSS notes?
thanks and regards
gkk

HI,
You should NOT change the decimal places in a productive system.
If you would do, the correction of the posted documents afterwards would be a remote consulting issue. Which you have to pay for SAP.
You see, all posting you have done until now, would get displayed in a wrong way, and the new posting wouldn't compare to the others.
Please check the note 137626 describes this.
If you really need to change the decimals, you should create a new currency type, for example your current is SAR, and now you should create a SA2. Then you should enter new rations and exchange rates for it, and work with the new one.
Also if you want to set the decimals to two digits from four, youshould not enter an entry in the OY04(TCURX).
In this table you can only enter a value, that discriminate from 2 decimals. If there is no entry in the table, it means the currency has two decimals.
Please assign points if it useful.
Regards
Ravinagh Boni

For Japanies Currency Yen - Getting Warnig message Decimal places not permi

Hi SRM,
For Japanies Currency Yen - Getting Warnig message Decimal places are not permitted,
while creating Shopping Cart.
Could you please provide solution for this.
If you provied OSS notes on Japanies currencies ( > Support Pack -14).
Thanks in advance
Edited by: CK on Jun 25, 2009 9:50 AM

Hi Muthu,
Thanks a lot for your reply ,
Could you please provide for this is there any OSS note saying that this is standard functionality,
Sothat I can communicate this to customer.
Greatly Appreciated...
CK
Edited by: CK on Jul 2, 2009 4:05 PM

Currency Conversion Cuts off at 10 decimal places

Hello all,
When doing currency conversions the database cuts off the data two the 10th decimal place. I need to be at 12 decimal places. In the database the setting is set at decimal(25,10). Is there a way to change it so the database will go out to more decimal places?
Thanks for your help
Steve

It is possible to change the format to accept larger values, however this change will only impact any newly created Applications.
To change the default, open Administrator and select "Set Application Parameters"
Add the KeyID "SIGNED_DATA_FORMAT" and for the Value enter the total number of digits and the number of decimals, ex: "20,15" would indicate 20 digits to the left of the decimal and 15 to the right.
Click on Update.
Any new Application created will now use this new value for the Signed data column.
I hope this helps in answering your question.

Display amount in ALV Grid with different Decimal Places based on Currency

HI Experts,
Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2.
we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
AED---22.56
KWD---225.65
i need to display values like AED : 22.56

HI Experts,
Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2. we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
AED---22.56
KWD---225.65 (converting this value to 22.565 using BAPI_CURRENCY_GETDECIMALS according to currency in my Report)
i need to display values like AED : 22.56
KWD---22.565 but here field is NETWR with 2 decimal.
Need to Display amount in ALV Grid with different Decimal Places based on Currency
Regards,
Dileep Kumar Reddy

Create Currency Decimal Places

Similar Messages

Maybe you are looking for