Create custom image frames in Master slides

Hi folks-
I see how to customize all the content for a custom theme, but I don't see where I can define new image frames in a custom Master theme. For example, say I have a dotted border I want to act as a new frame for a media placeholder. Where can I define this?
Thanks.

You can't add a custom frame because they aren't stored in the file when you give it to someone else. Let me rephrase that, you COULD make a custom frame, and I actually did for Keynote 08, but it will ONLY work if you manage to install it on every copy of Keynote you use. If you open your file on a copy of Keynote that uses that frame, it will come up without the frame.
You could go old school and just make a frame in photoshop, then stick that on the master slide and stick your photos behind it (there's an option to allow layering with master slide items). That's how Keynote used to work.

Similar Messages

  • How to create custom images c.war, similar to i.war.  --context not working

    ORDS beta 3.0..65.09.31
    I am trying to create a custom images c.war file, similar to the way one creates the i.war file for the APEX satic images.
    The directions say:
    java -jar ords.war static [--context] <location>
    Options:
               [--context]           The context path at which the
                                     WAR will be deployed,
                                     defaults to: /i
    Arguments:
               <location>            The location where the Oracle
                                     Application Express static
                                     resources are stored
    but I have yet to find any combination of syntax that will give me a war that maps to /c instead of /i, the default.
    For example:
    C:\oracle\ords3.0.0.65.09.31>java -jar ords.war static --context /c   C:\oracle\custom_htmldb
    WAR Generation complete
    WAR location     : C:\oracle\ords3.0.0.65.09.31\i.war
    Context path     : /i
    Static resources : C:\oracle\custom_htmldb
    Ensure the static resources are available at path: C:\oracle\custom_htmldb
    on the server where the WAR is deployed
    and
    C:\oracle\ords3.0.0.65.09.31>java -jar ords.war static --/c   C:\oracle\custom_ht
    mldb
    java -jar ords.war static [--context] <location>
    Options:
               [--context]           The context path at which the
                                     WAR will be deployed,
                                     defaults to: /i
    Arguments:
               <location>            The location where the Oracle
                                     Application Express static
                                     resources are stored
    --/c is not a valid option
    and variations using quotes and single quotes - all result in the same, either /i gets mapped or I get the directions again/
    This has to be something really simple.
    Please help!
    Thank you

    hi Jose,
    thanks for your answers, i tried to emulate the same but during step create time constraint in OOVK i am getting an error below:
    Specify the key within the work area
    Message no. SV033
    Diagnosis
    You have attempted to create an entry whose key is not in the range defined for this area.
    System Response
    The entry cannot be created.
    Procedure
    Please check your entry.
    below are the steps i executed upto now.
    Create infotype smilar to IT 1001 (ppci)
    Created new object type (ooot)
    created new relationship along with allowed relationship (oovk)
    Do you have any idea where it went wrong?
    Mani

  • How can I change the image quality of a background image on a master slide?

    I can change the image quality from low to high for other images in my Captivate project, but the background image I'm using on my master slide looks pixellated. I would like to change this image to high-quality but I don't see the option in my properties panel on my master slide.
    Thanks for any help!

    You cannot import AI images directly. However, when I use Illustrator drawings, I'll import them as smart object in Photoshop and then you can import the PS-layer.
    The quality you set in Captivate is not for individual images, but for the slides that are published as bitmap. This means that it doesn't matter if the object is on a master slide or on a regular slide IMO
    Lilybiri

  • Adjusting Image Used for Master Slide Background

    I'd like to use a jpeg of mine as the master slide background in a Keynote doc. But I'd like to be able to adjust that image (e.g., making it brighter or less opaque) so that text is clearly visible on it. I know that in the Inspector there are ample ways to adjust the qualities of an image inserted into a slide, but I have not found any way to do with images that are slide backgrounds (or the slide master).
    Does anyone know a way? Thanks.

    I'd like to use a jpeg of mine as the master slide background in a Keynote doc. But I'd like to be able to adjust that image (e.g., making it brighter or less opaque) so that text is clearly visible on it. I know that in the Inspector there are ample ways to adjust the qualities of an image inserted into a slide, but I have not found any way to do with images that are slide backgrounds (or the slide master).
    Does anyone know a way? Thanks.

  • Creating custom dimensions/frame rate?

    Hi,
    I have a podcast intro that I'm trying to create. This is 640x360 and 30fps.
    first, I can't even seem to set my project to my folder on my drive... this is very frustrating
    second, and the killer is that I can't even seem to find a way to customize my settings! I'm almost certain I could do this in FCP HD, but now I can't even open that application any more... FCP X has taken that away from me.
    Is there a way to do this, or a way to use the original FCP?
    thanks,
    Dave

    Dave,
    If you have a clip that is the size you're looking for, lay that down on the timeline first. The timeline (project) will conform to that clip.
    Unfortunately, the frame rate is also dictated by that first clip and it cannot be changed. But there aren't many situations where you will want to change that.
    As long as you have the aspect ratio correct for your project, you can always export to the right frame size for delivery. And yes, FCX only supports standard frame sizes for video. I tried but was unable to make a 480x270 timeline. I had to settle for 960x540 and transcode after editing.

  • Widget on master slides

    Hi, I am trying to add a slideshow widget to a master slide, which Muse allows me to do, however when I drag that master to my content slides, it doesn't seem to have the widget on the content slide. I must be doing something wrong otherwise I expect Muse wouldn't allow me to create the widget on a master slide.
    Thanks
    I found my mistake, I copied the widget from an non master page to the master page. When I create it from scratch on the master page it works fine.

    Think of the Master page as a template that would contain only common stuff that primarily includes your navigation menu, header and footer which are supposed to remain consistent throughout all pages of your site (in normal scenario). One would not want to mess up their site's basic layout and design structure (that you define in a Master page) while editing a content page and hence the content of the Master is editable only in the Master page itself so as to isolate it from any other normal page ultimately reducing the chance of errors to the general layout.
    However, from designer's perspective, one might want to slightly change the design (including the header and footer) for select pages. And therefore, Muse allows you to create multiple Masters that you can easily apply to those specific content pages.
    Now in your case; if you're planning to create different themed slideshows on content pages but with some common overall design, then you might want to go with multiple Masters otherwise if they all are going to be very much unique (that includes unique images for each slide show) then the best option would be to create a slideshow for each page.
    Thanks,
    Vinayak

  • Can I put multiple object placeholder in Master slide?

    I would like to know if I can creat multiple object placeholder in Master slide or not.  After searching the disccusion, seems that this problem occur since Keynote 03 and is not improved till Keynote 09 now.  In fact, I would like to make a slide show of multiple photos, but I would like to arrange several photos in one slide and exactly the same position and size in each slide.  So, it would be easiler if I can make a master slide with mulitple object placeholders.  Can anyone help or if there is any alternative ways? Thank you.

    Apple Maps is not a GIS application. It might be one day. For now, you will have to use ArcGIS or something similar.

  • Create custom folders with custom icons like created by Vibe

    I would like to create a custom folder and sub folder in the GW folder list to link to an outside feature. Ideally, it would display in a custom pane on the right like the email list, forum plugin or calendar view.

    You might want to have a look at Russ Ward's WS Utilities: http://weststreetconsulting.com/WSC_Utils.htm
    ImpGraph by the late Bruce Foster also did most of this, but is no longer available.
    Steve Kubis' AutoText may also provide part of the solution (custom sized Anchored Frames): see: http://www.siliconprairiesoftware.com/Products.html
    You can also create custom anchored frames on your Reference pages and then copy & paste from there. Automatically scaling an imported file to properly fit would require a custom FrameScript or plug-in - FM's auto-scaling on import may distort your graphic.

  • How do I set up a master slide in Keynote that provides placeholders for multiple images?

    I came across an article in Mac|Life (Oct 2012 p90) titled "Create a Stylish Slideshow".  The steps include creating a master slide that allows for you to add multiple photos.  My master slide list for all themes allows for only one photo per slide.  What am I missing and how can I set up a slide to which I can add multiple photos as they do in this article?  Yes, I am using Keynote '09 v5.3.

    Thanks for the info.  Following the instructions which are covered in chap 12 of the User Manual, I found that I cannot use shapes as placeholders.  The only success I experienced was if I used an actual photo image.  With photos I could select  Define as Media Placeholder, with Shapes, the only option was to Define as Text Placeholder.  I will address this with a thorough review of chapter 12.  
    My initial problem was that I assumed that all themes in Keynote possessed the same set of Master slides.  When I found this not to be the case I looked at each theme and identified 12 of the 44 provided different master slide options which provided placeholders for more than 1 photo (a few provided up to 6).  For helpful information for others, here is a listing of those themes that provide master slides for more than 1 photo:  Editorial, Kyoto, Brushed Canvas, Typeset, Craft, Stock Book, Blue Print, Vellum, Modern Portfolio, White Corners, Storyboard, Formal. 
    Thanks again.  Your feedback got me on the right track to resolving my problem.

  • Master slide images not loading properly when previewing or when published

    I have created a master slide (including image) to be the background for my piece.  The image looks fine when I am in Captivate but when I preview the project the image does not display fully and only shows up bright bright white.  I tried publishing to see if this would make a difference but nothing.  I am using  a jpg image.
    Has anyone encountered this problem or does anyone have any ideas how I can make the image display?
    Thanks
    Jodie

    What is the slide quality? Default setting is Low (8-bit), depending on your JPEG-image quality this may be too low. Try to change to High or Optimized and see if this is better.
    Lilybiri

  • Create custom slider indicator adding 2 digital indicator

    Hello,
    I have a problem. I have one indicator like capture attached. I want use the reference control to add in report (append control image to report).
    The problem is it only add the capture of control slider and I would like to do the control customized, so  It would show the digital % indicators.
    I am trying but I can't do it.
    Any help please?.
    Regards, Fred.
    Attachments:
    Slider.png ‏2 KB

    Hi Fred,
    when you want an image of all indicators you need to create an image of all indicators. When you just ask for an image of the slider you only get an image of the slider…
    From your picture I guess you stacked atleast two indicators, one slider with a digital display and one additional numeric indicator?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Prob While Creating Customer Master - Error Msg "Number '0' Not defined"

    Dear Experts,
    I am Trying to create a customer with diff SP, SH, BP and PY. I was able to create Customer for BP and PY.
    But now when I go and try to created a SH customer with xd01 for my Sales.Org (99SS-XS-X1),
    In the Sales Area Data, Partner Function Tab, Partner function field the Number is 0 before the SH function field (instead of Internal / Blank) and at the bottom  give the error Msg that "Number '0' is not define". I have Cross checked the my Number ranges(no-22 from 7000-7999), account groups(ZA22)  and Partner function (SH), everything seems to Ok. But unable to find the solution. plz help me with this if you have ever come across such a prob.
    I would like to mention that the previously had no issues in creating customers following same procedure. I guess some one must have changed some settings by accident.
    This prob is only specific while creating only SP and SH Customers.
    Many ThanX.

    Thanks Amit for your valuable suggestion, But today I was able to solve the problem with help of my trainer, Someone has changed the default settings in partner determination, the solution is below which will help anyone who may come across a similar Problem.
    Spro->IMG->Sales & Distribution->Basic Functions->Partner Determination->Setup Partner Determination->Setup Partner Determination for Customer Master->Partner Functions
    Find the partner Function SP/SH/BP/PY there partner type should be KU. If anyone changes this settings Then the above problem arises.
    Regards.

  • "SYNTAX_ERROR" while creating customer Master T-code-"FD01

    Dear All,
    Getting an error "SYNTAX_ERROR" while creating customer Master T-code-"FD01". The error as follwoes
    Short text :Syntax error in program "CMD_EI_API_CHECK==============CP ".
    What happened? : Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLCMD_BTE_OUTBOUND" had to be terminated because it               
         has                                                                               
    come across a statement that unfortunately cannot be executed.                                                                               
    The following syntax error occurred in program                                                
         "CMD_EI_API_CHECK==============CP " in include                                               
         "CMD_EI_API_CHECK==============CM04T " in                                                    
        line 82:                                                                               
    ""LS_KNVP_NEW_PARTIAL-PERNR" and "<LS_KNVP_NEW>-PERNR" are not mutually"                      
        " convertible in a Unicode program. ."                                                        
    The include has been created and last changed by:                                             
        Created by: "SAP "                                                                               
    Last changed by: "SAP "                                                                       
        Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLCMD_BTE_OUTBOUND" had to be terminated because it               
         has                                                                               
    come across a statement that unfortunately cannot be executed. 
    Error analysis :The following syntax error was found in the program                                           
         CMD_EI_API_CHECK==============CP :                                                           
        ""LS_KNVP_NEW_PARTIAL-PERNR" and "<LS_KNVP_NEW>-PERNR" are not mutually"                      
        " convertible in a Unicode program. ."                                                        
    Information on where terminated :Termination occurred in the ABAP program "SAPLCMD_BTE_OUTBOUND" - in                          
         "CMD_CUSTOMER_BTE_1321_IMPL".                                                                
        The main program was "SAPMF02D ".                                                                               
    In the source code you have the termination point in line 330                                 
        of the (Include) program "LCMD_BTE_OUTBOUNDU01".                        
    Please help us on this,
    Thanks in Advance,
    Kumar.K

    Dear Kumar,
    please kindly apply the SAP note 1511101.
    I hope this helps.
    Mauri

  • Error while creating customer master data

    dear sir,
    i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
      again while creating one with same name showing error while maintaing sales level data
    Check: Table KNA1 does not exist, table KNVI does
    Message no. F2061
    plz help how do i rectify this problem and maintain the same cutomer no (external) again.
    regards,
    Debesh

    Hi,
    you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
    XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
    Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
    If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
    regards
    Vivek.
    Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

  • While creating customer master  i am getting the Communication error

    Hi experts,
    while creating customer master  i am getting the  Communication error with the external tax system (VERTEX_MS0018)    please tellme how to solve this issue
    Regards,
    Anil prasad
    Edited by: prasadanil on Sep 16, 2011 12:52 PM

    hI Prasad,
    It seems you are maintaining the address data for a country with jurisdiction code. Different external control systems can behave in different ways.
    1. You entered a jurisdiction code that matches the postal code but not the city (possibly due to a typo).
    a) Behavior when you use Taxware: There is no message and data can be saved.
    b) Behavior when you use Vertex: Due to the incorrect city, no comparison jurisdiction code can be determined and message TAX_TXJCD861 is issued with a text from the vertex system that may be unintelligible.
    2. You do not enter a jurisdiction code, but you do enter a postal code and a city that does not match the code (possibly due to a typo).
    a) For Taxware: If the jurisdiction code could not be explicitly determined, a selection dialog box containing the relevant tax jurisdiction codes for the postal code appears. You select one. This and the corresponding city are transferred.
    b) For Vertex: The TAX_TXJCD861 message is issued (behavior as in 1b). Other terms TAX_TXJCD861, TAX_TXJCD101, TAX_TXJCD107.
    For resolving this issue, you can check SAP Note 677850 - Address data: Check/new determination jurisdiction code.
    Hope you will resolve the above issue with these inputs.
    Let me know if you need any further details.
    Ravi.

Maybe you are looking for