Create custom page on CC&B

Hi All,
I want to find documentation/sample about how to create a custom page in CC&B (step by step)
do you have any documentation or link?
Thanks a lot
Regards,
Hadi Wijaya

Go to Framework Administration > User Interface Tools. This should get you started with creating new zones/portals etc.

Similar Messages

  • Can no longer create custom page size for printing to PDF?

    When printing from FrameMaker to PDF in Windows, I used to be able to create a custom page size by clicking on the Add button that appeared to the right of the Adobe PDF Page Size window, in the Adobe PDF Document Properties dialog box. With Frame 9, that button no longer appears; in fact, the whole dialog box is cut off just inside the edge of the entry windows. Do I need to set something? Thanks for any help you can offer. - Cindy Shaler

    Cindy,
    I am not sure to what dialog boxes you are referring.
    In the PDF Setup dialog box (in FrameMaker's Print dialog or Save as PDF dialog), the Settings tab displays two fields to change the width and height of the paper. I tried entering odd values, and the resulting PDF had the entered size. I see no Add button nor is the dialog box cut off.
    Maybe I am not looking at the correct boxes.
    Van

  • Creating Custom Page Size less than one inch

    I currently have Acrobat 6 on Windows XP, and it appears that I cannot set a custom page size less than one inch (Using Printer Preferences). Is there another method I can use to create a PDF from Publisher that has a page size less than one inch? If not, would updating to Acrobat 9 allow me to print to a custom page size of less than one inch?

    Thanks Peggy,
    I tried deleting the preference file and restarting Pages but I still have the same problem with the custom page size. When I start Pages I am presented with a bunch of templates so I choose Blank then I go through my procedure to select the custom page size that I created and always end up back at an A4 document.
    I have used the demo version of Stone Create to do what I needed to do with the small page size (ie. create a small ad) but it is a pain that I paid for Pages and now will need to buy something like Stone Create to do what I need. Although, that said, having used Stone Create for this little ad I must say that for the price it seems like a pretty decent program that will do a whole lot of the desktop publishing type of functions without the rather steep prices of the Adobe products. I kind of wish I had bought this program instead of Pages now.
    Cheers,
    Graham

  • Making a created custom page visible to all users in Business Process Workspace

    Hi everyone
    I, as the admin of Business Process Workspace, have created a custom page to show an external URL.
    How can I make this page visible to all of our ordinary users?

    Hi Ashwini
    Thanks for replying.
    I did the same and it was working for me even if the Type is Single.
    I just gave the Group name and all users were able to see the task. This is fine with me.
    I just observed one more thing.
    When the task is created, all the users in the Group are able to see it in 'Me & My Group'.
    But the data entered by the creator is not seen by other users.
    There is an action 'Save' in the Task. If the creator clicked on it, then the task is automatically 'Acquired' by the creator.
    Other users in the group are able to see the task and the saved data, but are not able to Submit.
    What I expected the Save button to do is only to Save the data in the Payload. Not Claim it.
    Is there a way to make the payload data only to save but not to claim the task?
    Thanks and Regards
    Sameer

  • Creating custom page

    Hi All
    I want to create a custom page format  of width 220MM and Length 297MM. Kindly advice the transaction code through which we can create the custome page format.
    Thanks
    Ravindra Suvarna

    If you do not see the "Create" button, then you do not have autorization to do that action.  Have your Basis people create it for you or get authorization.
    Please remember to award points for helpful answers and mark your post as solved when solved completly. THanks.
    Regards,
    Rich Heilman

  • Can I use OA framework to create custom pages

    Hi,
    My client is using 11.5.8 and the Framework version is 5.6.
    And we want to add a custom page to iSupplier application.
    Can I use OA Framework extension to develop the page and add it to the application without upgrading the applications techstack.? If Yes, what version of the OA patch do I need to use for development.
    If not, is there any way to add a custom page to this application?

    OAF can be technology of choice only after 11.5.9 . Use JSP instead to develop your custom pages.
    --Mukul                                                                                                                                                                                                                                                               

  • Anyway to create custom page size for designjet 500? wasting way too much paper!

    just got a hp designjet 500 from jobsite. hooked up to mac. everything prints fine................
    EXCEPT
    ok i did a simple test 'strip' in adobe illustrator setting the width of the document to 36" which is the size of the paper roll i'm using. i had placed a couple of strips of the same objects with different color fills close to the bottom of the 'artboard'. when going to select print i realized that the printer only recognizes standard page sizes and does not allow me to change to a custom size to say like 36"w by 4" h. so the print came out in the center of a 48" long size piece of paper which obviously wastes soooo much paper.
    so i can't create a custom size print page is there a way to have it print close to the bottom margin, turn off the cutting feature, print it, cut manually then move the paper back via the machine or would i have to do it manually and realign the paper and setup after every print?
    thanks in advance!

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Designjet forum here.
    Be sure to mention your operating system when you post there. 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Is there a way to create custom page numbering (ie 1, 2, 2, 3, 3, etc.)?

    I have a document that needs special treatment for its page numbering. This is a two page spread that I need to have the same page number on facing pages. The page numbering would look like 1, 2, 2, 3, 3, 4, 4 and so on. I have looked through the forums and all the help documentation I can find, and the only thing remotely related is doing a print merge of two documents - but this doesn't solve my need to have the numbering scenario in the actual document. Is there a way to create a macro or script that I can add to the master pages that can calculate the correct page number? This is an Instructor's Guide that is well over 300 pages so I'm looking for some way to automate the process.

    Just if I understood your need correctly... Automatic Page Number shows the number of the page, where center of its text frame lies. The actual number may be on other page. Please see attached screenshots:
    and this is what you need:

  • Creating custom page size PDFs in Distiller 7

    I've created a music document (in Finale) with pages that are 9x12. I have been trying to make high-resolution PDFs in Distiller (Acrobat Professional 7) for the printing company. The Distiller's page size is set to 9x12 and so is the Page Setup. But my PDFs come out cut off at the top and right hand side (as if the page had been pushed up into to the upper right corner)
    What am I doing wrong?
    I'm working on an Intel iMac running OSX 10.4.10

    The PDF output size will be typically derived from your authoring
    application - the page size is used for EPS files without a specific
    bounding box ..
    Jon

  • Creating Custom page sizes

    I only just bought and installed v9 std, having been using
    v7, or 3D previously. After installing I found there are only a
    limited number of paper sizes available so gone into printer
    preferences to add new ones. Clicking on Add/Modify button brings
    up the dialogue box for a new page name and sizes which I enter.
    After I click the add button, I get the message "Not allowed to
    modify system or printer defined paper size (a2). only user defined
    paper size can be modified or deleted."
    Any suggestions as to what I am doing wrong?

    Please be advised that this forum is for discussions about
    the Acrobat.com online services only.
    Your best source of questions and answers for the Acrobat
    desktop product would be in the
    Acrobat
    Forums.
    Thanks!

  • SAPUI5-How to create custom Split Page control

    I want to create a custom split -like page control using sap.m library instead of Splitter.This page should contain two areas left and right
    content with different width.How to create this type of page as a custom control?
    Please help me with this.

    Hi,
    I think There is no need to create Custom Page for the labels.
    To create labels in SAPSCRIPT, you will have to define multiple MAIN WINDOWS in the Page Window.. try the following steps..
    Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
    1. Create a page window and assign it to a page.
    2. Choose Edit --> Main windows.
    A dialog box appears.
    3. Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
    4. Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
    5. Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
    Also Check these links.
    how to create labels in sap script?
    labels in script
    Labels in Scripts
    Regards
    Shiva Kumar

  • Custom Page Type

    Is there a way of hiding the Category and Keyword base attributes on a custom page as there is when creating a Custom Item Type?
    Is it possible to create a page template from a custom page? I just get "Error while copying page. (WWC-44262)
    (WWC-00000)" when trying this on Portal 9.0.2.3.
    I can create custom pages using wwsbr_api.add_folder but I don't think there is a way to associate a UITemplate with the resultant pages by amending one of the parameters. Can I use the information held in WWTMP_ALL_TEMPLATES to update whatever table associates the UItemplate with the folders/pages - if so which table is it? (I have now attached a template itself linked to a UITemplate to the page group but when you attach a template you lose the right to amend the page areas).

    Kendra,
    Sorry for the late reply but the forums were down yesterday.
    It is not a good practice to update the Portal tables directly. In this case, if the custom page type is identical to a standard page then the manual update should work. That means the custom page type should have no custom attributes or procedures. The custom attributes and procedures can be added to the page type later.
    There are other ways to solve this problem. You can use page parameters to accomplish the same thing - just define the page parameter, set a default value, and make the parameter non-customizable. If you have a group of pages that have the same attributes, you can define the parameters in the page template and all the pages will inherit the values. Using page parameters is no more work than updating attributes in a custom page type, and it is easier for portlets to get access to the parameter values than to look up page attributes.
    You can also use the function WWPRO_API_PARAMETERS.GET_VALUE('_pageid',p_reference_path) in a PL/SQL portlet to get the value of the portal pageid. You can then query a custom table that cross-references the page id's with the display attributes that you would like the page to use. If you are using Java portlets there are other techniques for parsing the page URL (in the PDK or even generic JDK functions) to get the pageid.
    Finally, we will continue to support custom page types. However, for this requirement I would recommend using page parameters instead (you may have other needs for custom page types, however).
    Regards,
    Jerry
    PortalPM

  • SharePoint custom page it is asking login name and password

    Hi Friends,
    I have created custom pages in SharePoint 2013.When ever if I click any custom page it is asking login name and password every time.But for SharePoint admin page it is not asking every time login  name and password.
    How can we fix this issue.It is very urgent.Please can anyone help to fix this issue.
    Thanks,
    Tiru
    Tiru

    Yes Inder is correct.
    http://social.technet.microsoft.com/Forums/office/en-US/0e08f9cb-1939-428d-9194-d21975ef70d3/created-sharepoint-2010-custom-login-pagewindows-authentication-but-it-asks-me-for-credentials?forum=sharepointgeneralprevious
    Use fiddler to check the root cause of the autentication issue.
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Custom page size - Serious Frustration

    Acrobat is used to setup alot of our work for output. When creating custom page sizes for different jobs, there is no order in the pull down menu for the custom page sizes.
    How can I set Acrobat Pro or MacOS X to display the custom page sizes in a numerical order ??
    I have tried under both MacOS 10.3.9 and 10.4.2 using both Acrobat Pro 6 and 7. The result is the same. The list of page sizes might be something like this when selecting the pull down menu:
    200x410
    186x250
    350x475
    215x275
    ....etc.
    Currently I have ~100 different custom page sizes for different impositions, the only way to work it is a. to search for the right size or b. try to remember where in the list the required custom size is.
    There is logical no order to the custom page size listing. Not even deleting existing sizes and recreating in the required order works. Interestingly, when creating a new size the existing sizes appear in numerical order but not when selecting from the pull down menu.
    Please help.
    Matt.
    G5 2.0 x2, 2.5GB Ram, 2x160GB   Mac OS X (10.3.9)   Acrobat 6 Pro (6.0.4)

    I've discovered that this is a SYSTEM issue, NOT an Adobe issue. The custom page setups are also out of any order in "Mail", "TextEdit", "InDesign" etc. etc. The other apps that I use typically have their own paper size interfaces not requiring to use the default apple one. (Eg. Quark / InDesign).
    To prove this point I deleted the custom paper settings in Acrobat so that just the default sizes existed and then went into TextEdit and recreated some custom paper sizes using the Page Setup interface. Again, created custom paper sizes DO NOT list in either numerical or chronological order.
    The apple system file which controls this is called "com.apple.print.custompapers.plist"
    I found this entry on the macosxhints forum:
    http://forums.macosxhints.com/showthread.php?t=23681
    2 other users noting frustration with the same problem, but it doesn't offer any solution
    Is anyone familiar with hacking ".plist" files? Maybe there is way to edit the file to adjust it to a logical order.
    G5 2.0 x2, 2.5GB Ram, 2x160GB   Mac OS X (10.3.9)  

  • Customizing pages of book

    Can the sizes of the individual photos (on a book page) be changed? Can they be moved?
    Eric

    If you have a 3rd party image editor that can handle layers you can create customized pages for any theme as described in Old Toad's Tutorial #19 - Creating a Custom Page, with the Theme's Background for an iPhoto Book.
    OT

Maybe you are looking for