Create custom rule: Looking for ORA errors in the alert log
I would like to create a rule to notify me when ORA errors are generated to the alert log. When I try to create a rule, I seem to only be able to choose from predefined lists. Has anyone configured a rule for this?
Grrr. This is for 10.2 Grid:
Go to databases --> select your database
Under Diagnostic summary, you'll see:
Alert Log 28-Dec-2006 09:19:48
The date part is a clickable link, click on it. Scroll to the bootom of the next page and click on:
"Generic Alert Log Error Monitoring Configuration"
Now read the page very carefully, its all self explanatory. The reason who haven't had some errors reported is because of that filter. Now set it up the way you want it.
Good luck
Bazzza
Similar Messages
-
how to create an rule with action to subtract from the event log of Ips manager express console?, some knows of has an guide?.
Thank you.
Sent from Cisco Technical Support iPad AppHi,
http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_tech_note09186a0080bc7910.shtml
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach us"
http://www.cisco.com/web/partners/tools/pdihd.html -
Hi There,
Recently I started seeing these errors in the alert log for one of the databases:
Tue Aug 04 05:05:00 2009
Errors in file c:\oracle\product\10.2.0\admin\xxxxxx\bdump\xxxxxx_j000_6104.trc:
ORA-12012: error on auto execute of job 130961
ORA-27370: job slave failed to launch a job of type EXECUTABLE
ORA-27300: OS system dependent operation:accessing execution agent failed with status: 109
ORA-27301: OS failure message: The pipe has been ended.
ORA-27302: failure occurred at: sjsec 9
ORA-27303: additional information: The pipe has been ended.
So, I tried looking at the trace file associated with the error, and here is what I get:
$ cat ebcd01_j000_6104.trc
Dump file c:\oracle\product\10.2.0\admin\xxxxxx\bdump\xxxxxx_j000_6104.trc
Tue Aug 04 05:05:00 2009
ORACLE V10.2.0.3.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Release 10.2.0.3.0 - Production
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 4 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1095M/4095M, Ph+PgF:7747M/12110M, VA:1367M/2047M
Instance name: ebcd01
Redo thread mounted by this instance: 1
Oracle process number: 53
Windows thread id: 6104, image: ORACLE.EXE (J000)
*** ACTION NAME:(DEL_ARCH_EBCP01) 2009-08-04 05:05:00.191
*** MODULE NAME:(DBMS_SCHEDULER) 2009-08-04 05:05:00.191
*** SERVICE NAME:(SYS$USERS) 2009-08-04 05:05:00.191
*** SESSION ID:(871.15642) 2009-08-04 05:05:00.191
*** 2009-08-04 05:05:00.191
ORA-12012: error on auto execute of job 130961
ORA-27370: job slave failed to launch a job of type EXECUTABLE
ORA-27300: OS system dependent operation:accessing execution agent failed with status: 109
ORA-27301: OS failure message: The pipe has been ended.
ORA-27302: failure occurred at: sjsec 9
ORA-27303: additional information: The pipe has been ended.
I'm not sure what job is causing this as there is no reference and also not sure how to resolve this issue!! How can I properly trace back these errors? Any ideas or tips to what should I do?
I'm running 10.2.0.3 database on windows 2003 server.
ThanksI found the problem.. the executable job was referring to a none existing batch file..
I have refreshed the database from production some time ago and the jobs I have setup are referring to production scripts and paths (which we didnt have on dev)..
This is now resolved.
Thanks -
"Error in the alert log file " - please help
Hi ALL,
I am getting following errors in the alert log frequently.
My database version is:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Productio
NLSRTL Version 10.2.0.1.0 - Production
Thu Aug 30 16:58:19 2007
Memory Notification: Library Cache Object loaded into SGA
Heap size 2172K exceeds notification threshold (2048K)
KGL object name :select object_name from all_objects where object_name='TOAD_PROFILER' and object_type='PACKAGE'
Thu Aug 30 17:09:36 2007
************************************************************************************Additionally you can visit here:
Alert Error from trc files--Heap size 5236K exceeds notification threshold
geting error in alert log file
Adith -
Unable to create custom phone labels for new contacts since the upgrade
I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.
If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
ORA-07445 in the alert log when inserting into table with XMLType column
I'm trying to insert an xml-document into a table with a schema-based XMLType column. When I try to insert a row (using plsql-developer) - oracle is busy for a few seconds and then the connection to oracle is lost.
Below you''ll find the following to recreate the problem:
a) contents from the alert log
b) create script for the table
c) the before-insert trigger
d) the xml-schema
e) code for registering the schema
f) the test program
g) platform information
Alert Log:
Fri Aug 17 00:44:11 2007
Errors in file /oracle/app/oracle/product/10.2.0/db_1/admin/dntspilot2/udump/dntspilot2_ora_13807.trc:
ORA-07445: exception encountered: core dump [SIGSEGV] [Address not mapped to object] [475177] [] [] []
Create script for the table:
CREATE TABLE "DNTSB"."SIGNATURETABLE"
( "XML_DOCUMENT" "SYS"."XMLTYPE" ,
"TS" TIMESTAMP (6) WITH TIME ZONE NOT NULL ENABLE
) XMLTYPE COLUMN "XML_DOCUMENT" XMLSCHEMA "http://www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd" ELEMENT "Object"
ROWDEPENDENCIES ;
Before-insert trigger:
create or replace trigger BIS_SIGNATURETABLE
before insert on signaturetable
for each row
declare
-- local variables here
l_sigtab_rec signaturetable%rowtype;
begin
if (:new.xml_document is not null) then
:new.xml_document.schemavalidate();
end if;
l_sigtab_rec.xml_document := :new.xml_document;
end BIS_SIGNATURETABLE2;
XML-Schema (xmldsig-core-schema.xsd):
=====================================================================================
<?xml version="1.0" encoding="utf-8"?>
<!-- Schema for XML Signatures
http://www.w3.org/2000/09/xmldsig#
$Revision: 1.1 $ on $Date: 2002/02/08 20:32:26 $ by $Author: reagle $
Copyright 2001 The Internet Society and W3C (Massachusetts Institute
of Technology, Institut National de Recherche en Informatique et en
Automatique, Keio University). All Rights Reserved.
http://www.w3.org/Consortium/Legal/
This document is governed by the W3C Software License [1] as described
in the FAQ [2].
[1] http://www.w3.org/Consortium/Legal/copyright-software-19980720
[2] http://www.w3.org/Consortium/Legal/IPR-FAQ-20000620.html#DTD
-->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" xmlns:xdb="http://xmlns.oracle.com/xdb"
targetNamespace="http://www.w3.org/2000/09/xmldsig#" version="0.1" elementFormDefault="qualified">
<!-- Basic Types Defined for Signatures -->
<xs:simpleType name="CryptoBinary">
<xs:restriction base="xs:base64Binary">
</xs:restriction>
</xs:simpleType>
<!-- Start Signature -->
<xs:element name="Signature" type="ds:SignatureType"/>
<xs:complexType name="SignatureType">
<xs:sequence>
<xs:element ref="ds:SignedInfo"/>
<xs:element ref="ds:SignatureValue"/>
<xs:element ref="ds:KeyInfo" minOccurs="0"/>
<xs:element ref="ds:Object" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="SignatureValue" type="ds:SignatureValueType"/>
<xs:complexType name="SignatureValueType">
<xs:simpleContent>
<xs:extension base="xs:base64Binary">
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
<!-- Start SignedInfo -->
<xs:element name="SignedInfo" type="ds:SignedInfoType"/>
<xs:complexType name="SignedInfoType">
<xs:sequence>
<xs:element ref="ds:CanonicalizationMethod"/>
<xs:element ref="ds:SignatureMethod"/>
<xs:element ref="ds:Reference" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="CanonicalizationMethod" type="ds:CanonicalizationMethodType"/>
<xs:complexType name="CanonicalizationMethodType" mixed="true">
<xs:sequence>
<xs:any namespace="##any" minOccurs="0" maxOccurs="unbounded"/>
<!-- (0,unbounded) elements from (1,1) namespace -->
</xs:sequence>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>
<xs:element name="SignatureMethod" type="ds:SignatureMethodType"/>
<xs:complexType name="SignatureMethodType" mixed="true">
<xs:sequence>
<xs:element name="HMACOutputLength" minOccurs="0" type="ds:HMACOutputLengthType"/>
<xs:any namespace="##other" minOccurs="0" maxOccurs="unbounded"/>
<!-- (0,unbounded) elements from (1,1) external namespace -->
</xs:sequence>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>
<!-- Start Reference -->
<xs:element name="Reference" type="ds:ReferenceType"/>
<xs:complexType name="ReferenceType">
<xs:sequence>
<xs:element ref="ds:Transforms" minOccurs="0"/>
<xs:element ref="ds:DigestMethod"/>
<xs:element ref="ds:DigestValue"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
<xs:attribute name="URI" type="xs:anyURI" use="optional"/>
<xs:attribute name="Type" type="xs:anyURI" use="optional"/>
</xs:complexType>
<xs:element name="Transforms" type="ds:TransformsType"/>
<xs:complexType name="TransformsType">
<xs:sequence>
<xs:element ref="ds:Transform" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:element name="Transform" type="ds:TransformType"/>
<xs:complexType name="TransformType" mixed="true">
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:any namespace="##other" processContents="lax"/>
<!-- (1,1) elements from (0,unbounded) namespaces -->
<xs:element name="XPath" type="xs:string"/>
</xs:choice>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>
<!-- End Reference -->
<xs:element name="DigestMethod" type="ds:DigestMethodType"/>
<xs:complexType name="DigestMethodType" mixed="true">
<xs:sequence>
<xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>
<xs:element name="DigestValue" type="ds:DigestValueType"/>
<xs:simpleType name="DigestValueType">
<xs:restriction base="xs:base64Binary"/>
</xs:simpleType>
<!-- End SignedInfo -->
<!-- Start KeyInfo -->
<xs:element name="KeyInfo" type="ds:KeyInfoType"/>
<xs:complexType name="KeyInfoType" mixed="true">
<xs:choice maxOccurs="unbounded">
<xs:element ref="ds:KeyName"/>
<xs:element ref="ds:KeyValue"/>
<xs:element ref="ds:RetrievalMethod"/>
<xs:element ref="ds:X509Data"/>
<xs:element ref="ds:PGPData"/>
<xs:element ref="ds:SPKIData"/>
<xs:element ref="ds:MgmtData"/>
<xs:any processContents="lax" namespace="##other"/>
<!-- (1,1) elements from (0,unbounded) namespaces -->
</xs:choice>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="KeyName" type="xs:string"/>
<xs:element name="MgmtData" type="xs:string"/>
<xs:element name="KeyValue" type="ds:KeyValueType"/>
<xs:complexType name="KeyValueType" mixed="true">
<xs:choice>
<xs:element ref="ds:DSAKeyValue"/>
<xs:element ref="ds:RSAKeyValue"/>
<xs:any namespace="##other" processContents="lax"/>
</xs:choice>
</xs:complexType>
<xs:element name="RetrievalMethod" type="ds:RetrievalMethodType"/>
<xs:complexType name="RetrievalMethodType">
<xs:sequence>
<xs:element ref="ds:Transforms" minOccurs="0"/>
</xs:sequence>
<xs:attribute name="URI" type="xs:anyURI"/>
<xs:attribute name="Type" type="xs:anyURI" use="optional"/>
</xs:complexType>
<!-- Start X509Data -->
<xs:element name="X509Data" type="ds:X509DataType"/>
<xs:complexType name="X509DataType">
<xs:sequence maxOccurs="unbounded">
<xs:choice>
<xs:element name="X509IssuerSerial" type="ds:X509IssuerSerialType"/>
<xs:element name="X509SKI" type="xs:base64Binary"/>
<xs:element name="X509SubjectName" type="xs:string"/>
<xs:element name="X509Certificate" type="xs:base64Binary"/>
<xs:element name="X509CRL" type="xs:base64Binary"/>
<xs:any namespace="##other" processContents="lax"/>
</xs:choice>
</xs:sequence>
</xs:complexType>
<xs:complexType name="X509IssuerSerialType">
<xs:sequence>
<xs:element name="X509IssuerName" type="xs:string"/>
<xs:element name="X509SerialNumber" type="xs:integer"/>
</xs:sequence>
</xs:complexType>
<!-- End X509Data -->
<!-- Begin PGPData -->
<xs:element name="PGPData" type="ds:PGPDataType"/>
<xs:complexType name="PGPDataType">
<xs:choice>
<xs:sequence>
<xs:element name="PGPKeyID" type="xs:base64Binary"/>
<xs:element name="PGPKeyPacket" type="xs:base64Binary" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"
maxOccurs="unbounded"/>
</xs:sequence>
<xs:sequence>
<xs:element name="PGPKeyPacket" type="xs:base64Binary"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"
maxOccurs="unbounded"/>
</xs:sequence>
</xs:choice>
</xs:complexType>
<!-- End PGPData -->
<!-- Begin SPKIData -->
<xs:element name="SPKIData" type="ds:SPKIDataType"/>
<xs:complexType name="SPKIDataType">
<xs:sequence maxOccurs="unbounded">
<xs:element name="SPKISexp" type="xs:base64Binary"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<!-- End SPKIData -->
<!-- End KeyInfo -->
<!-- Start Object (Manifest, SignatureProperty) -->
<xs:element name="Object" type="ds:ObjectType"/>
<xs:complexType name="ObjectType" mixed="true">
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:any namespace="##any" processContents="lax"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
<xs:attribute name="MimeType" type="xs:string" use="optional"/> <!-- add a grep facet -->
<xs:attribute name="Encoding" type="xs:anyURI" use="optional"/>
</xs:complexType>
<xs:element name="Manifest" type="ds:ManifestType"/>
<xs:complexType name="ManifestType">
<xs:sequence>
<xs:element ref="ds:Reference" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="SignatureProperties" type="ds:SignaturePropertiesType"/>
<xs:complexType name="SignaturePropertiesType">
<xs:sequence>
<xs:element ref="ds:SignatureProperty" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="SignatureProperty" type="ds:SignaturePropertyType"/>
<xs:complexType name="SignaturePropertyType" mixed="true">
<xs:choice maxOccurs="unbounded">
<xs:any namespace="##other" processContents="lax"/>
<!-- (1,1) elements from (1,unbounded) namespaces -->
</xs:choice>
<xs:attribute name="Target" type="xs:anyURI" use="required"/>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<!-- End Object (Manifest, SignatureProperty) -->
<!-- Start Algorithm Parameters -->
<xs:simpleType name="HMACOutputLengthType">
<xs:restriction base="xs:integer"/>
</xs:simpleType>
<!-- Start KeyValue Element-types -->
<xs:element name="DSAKeyValue" type="ds:DSAKeyValueType"/>
<xs:complexType name="DSAKeyValueType">
<xs:sequence>
<xs:sequence minOccurs="0">
<xs:element name="P" type="ds:CryptoBinary"/>
<xs:element name="Q" type="ds:CryptoBinary"/>
</xs:sequence>
<xs:element name="G" type="ds:CryptoBinary" minOccurs="0"/>
<xs:element name="Y" type="ds:CryptoBinary"/>
<xs:element name="J" type="ds:CryptoBinary" minOccurs="0"/>
<xs:sequence minOccurs="0">
<xs:element name="Seed" type="ds:CryptoBinary"/>
<xs:element name="PgenCounter" type="ds:CryptoBinary"/>
</xs:sequence>
</xs:sequence>
</xs:complexType>
<xs:element name="RSAKeyValue" type="ds:RSAKeyValueType"/>
<xs:complexType name="RSAKeyValueType">
<xs:sequence>
<xs:element name="Modulus" type="ds:CryptoBinary"/>
<xs:element name="Exponent" type="ds:CryptoBinary"/>
</xs:sequence>
</xs:complexType>
<!-- End KeyValue Element-types -->
<!-- End Signature -->
</xs:schema>
===============================================================================
Code for registering the xml-schema
begin
dbms_xmlschema.deleteSchema('http://xmlns.oracle.com/xdb/schemas/DNTSB/www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd',
dbms_xmlschema.DELETE_CASCADE_FORCE);
end;
begin
DBMS_XMLSCHEMA.REGISTERURI(
schemaurl => 'http://www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd',
schemadocuri => 'http://www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd',
local => TRUE,
gentypes => TRUE,
genbean => FALSE,
gentables => TRUE,
force => FALSE,
owner => 'DNTSB',
options => 0);
end;
Test program
-- Created on 17-07-2006 by EEJ
declare
XML_TEXT3 CLOB := '<Object xmlns="http://www.w3.org/2000/09/xmldsig#">
<SignatureProperties>
<SignatureProperty Target="">
<Timestamp xmlns="http://www.sporfori.fo/schemas/dnts/general/2006/11/14">2007-05-10T12:00:00-05:00</Timestamp>
</SignatureProperty>
</SignatureProperties>
</Object>';
xmldoc xmltype;
begin
xmldoc := xmltype(xml_text3);
insert into signaturetable
(xml_document, ts)
values
(xmldoc, current_timestamp);
end;
Platform information
Operating system:
-bash-3.00$ uname -a
SunOS dntsdb 5.10 Generic_125101-09 i86pc i386 i86pc
SQLPlus:
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Aug 17 00:15:13 2007
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning and Data Mining options
Kind Regards,
EyðunYou should report this in a service request on http://metalink.oracle.com.
It is a shame that you put all the effort here to describe your problem, but on the other hand you can now also copy & paste the question to Oracle Support.
Because you are using 10.2.0.3; I am guessing that you have a valid service contract... -
Oradism not set up correctly error in the alert log in 9.2.0.4
Hello,
I have installed 9.2.0.4 patch on top of 9.2.0.1 database.
The O/S is Solaris 5.9
The database is set to work with:
workarea_size_policy=AUTO.
The database is not working properly compared to other machines we have.
After looking in the alert log I found the following error popping after restart:
WARNING: -------------------------------
WARNING: oradism not set up correctly.
Dynamic ISM can not be locked. Please
setup oradism, or unset sga_max_size.
[diagnostic 0, 16, 5001]
I found the following two notes on the subject, contradicting each other and also contradicting the status of the machine:
Note:151222.1
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=151222.1
Telling me not to do the below procedure on 9.2.0.4, though I get the same error and miss the required etc entries specified.
Note:262886.1
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=262886.1
Telling me to copy oradism.sav to oradism and I already have those.
Can you please supply a full and DETAILED procedure regarding what should I do, in case it is not a procedure, please specify how I should solve the oradism not set up correctly error.
Tal Olier
[email protected]Hi Tal,
Just looked at the notes you referred to. The first doesn't apply to 9.2.0.4. as you state. The other note is for 9.2.0.4e (note the "e", stands for embedded). This "e" release is not what you have, so that note doesn't apply either.
The AR that I referred to is for 10g, but the 9iR2 info is the same. You need to make sure that $ORACLE_HOME/bin/oradism is owned by root. -
Error in the alert.log file
hi,
my database is down , when chk the alert log i found the below error
please help me
Sun Mar 8 20:06:01 2009
Errors in file /busdata/sp01/eur1/_lgi/oracle/vol1/admin/udump/sp01eur1_ora_3731494.trc:
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 4
Shutting down instance: further logons disabled
Shutting down instance (immediate)
License high water mark = 5
Sun Mar 8 20:06:04 2009
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
Sun Mar 8 20:06:04 2009
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archiving is disabledmadhukrishna wrote:
i am not authorised to start the databse or any servicesThen You have only one choice - please contact Your system administrator and he will investigate what happened, why and how to solve that.
We can't help or say what was wrong if You have no rights to do anything, even look at trace files. -
Errors in the alert log upon portal 3.0.6 installation
We installed Portal 3.0.6 with with Oracle 8.1.7 on a RedHat 6.2, kernel 2.2.17 machine. We noticed the following error lines in the alert-log, just before opening the DB:
ORA-00604: error occurred at recursive SQL level 1
ORA-04045: errors during recompilation/revalidation of SYS./cd252dcc_RegisterService
ORA-30511: invalid DDL operation in system triggers
ORA-06512: at "SYS.DBMS_JAVA", line 0
ORA-06512: at line 2
Any idea what might be the problem here?
The DB and Portal seem to communicate well so far. The pool_sizes in init.ora are setup high, 50Mb each.
Thanks.
K.
nullKrassi,
Not sure what the error is. Have you tried to look at the object using DBA Studio to see if it can be recompiled?
Rich -
Ora -3113 error in the alert log
Hi ,
We are getting ORA-3113 error in the alertlog and i pasted below alert log entry.
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 27-JAN-2011 16:11:25
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNSperation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.100.72.127)(PORT=2844))
Thu Jan 27 16:13:55 2011
opidcl aborting process unknown ospid (18585_47319544949952) due to error ORA-3113
Thu Jan 27 16:14:03 2011
Thread 2 advanced to log sequence 2022 (LGWR switch)
Current log# 4 seq# 2022 mem# 0: +DATA/systemprod/onlinelog/group_4.269.736019283
Current log# 4 seq# 2022 mem# 1: +FLASH1/systemprod/onlinelog/group_4.262.736019285
Thu Jan 27 16:14:13 2011
opidcl aborting process unknown ospid (14096_47207734746304) due to error ORA-3113
Thu Jan 27 16:16:34 2011
Thread 2 advanced to log sequence 2023 (LGWR switch)
Current log# 8 seq# 2023 mem# 0: +DATA/systemprod/onlinelog/group_8.319.736018999
Current log# 8 seq# 2023 mem# 1: +FLASH1/systemprod/onlinelog/group_8.3138.736018999
Thu Jan 27 16:19:33 2011
Thread 2 advanced to log sequence 2024 (LGWR switch)
Current log# 3 seq# 2024 mem# 0: +DATA/systemprod/onlinelog/group_3.268.736019049
Current log# 3 seq# 2024 mem# 1: +FLASH1/systemprod/onlinelog/group_3.261.736019051
Thu Jan 27 16:22:17 2011
What could be the workaround to resove this issue
Regards
PremORA-00600/ORA-07445/ORA-03113 = Oracle bug => search on Metalink and/or call Oracle support
-
ORA-00316 in the alert log file
Thu Aug 21 17:23:05 2008
Errors in file /ora_dump/CONCILIA/bdump/concilia_arc1_205172.trc:
ORA-00316: log 3 of thread 1, type 0 in header is not log file
ORA-00312: online log 3 thread 1: '/ora_data04/CONCILIA/redo01.log'
Thu Aug 21 17:23:05 2008
Errors in file /ora_dump/CONCILIA/bdump/concilia_arc1_205172.trc:
ORA-00316: log 3 of thread 1, type 0 in header is not log file
ORA-00312: online log 3 thread 1: '/ora_data04/CONCILIA/redo01.log'
$It looks like your redo log might be corrupted.
Check the content of trc file and work with Oracle support.
00316, 00000, "log %s of thread %s, type %s in header is not log file"
// *Cause: The online log is corrupted or is an old version.
// *Action: Find and install correct version of log or reset logs. -
Looking for sample template with the check on the bottom of the page
Customer is looking for sample template with the check on the bottom of the page, anyone know of one? Their Bank doesn't like the check on the top of the page because when you rip the check from the stub is sometimes rips the microline. -Thanks
Hi Dale,
Check this one(template attached) : http://blogs.oracle.com/xmlpublisher/2006/04/13/#a12
You just need to flip the invoice and check position,..
regards.. -
Need to find the way to get the actual error message in the alert log.
Hi,
I have configured OEM 11G and monitoring target versions are from 9i to 11g. Now my problem is i have defined the metrics for monitoring the alert log contents and OEM is sending alert if there is any error in the alert log but it is not showing the actual error message just it is showing as below.
============================
Target Name=IDMPRD
Target type=Database Instance
Host=oidmprd01.ho.abc.com
Occurred At=Dec 21, 2011 12:05:21 AM GMT+03:00
Message=1 distinct types of ORA- errors have been found in the alert log.
Metric=Generic Alert Log Error Status
Metric value=1
Severity=Warning
Acknowledged=No
Notification Rule Name=RULE_4_PROD_DATABASES
Notification Rule Owner=SYSMAN
============================
Is there any way to get the complete error details in the OEM alert itself.
Regards
DBA.You need to look at the Alert Log error messages, not the "status" messages. See doc http://docs.oracle.com/cd/E11857_01/em.111/e16285/oracle_database.htm#autoId2
-
We have recently migrated our database from Solaris to Linux (RHEL5) and since this migration we are seeing weird errors related to archive log shipping to the remote standby site and a corresponding ORA-600 in the standby site.
What's interesting is everything gets resolved by itself, it always seems to happen during the heavy database load when there is frequent log switch happening (~3 min). So initially it tries to archive to the remote site and it fails with the following error in the primary alert log.
Errors in file /app/oracle/admin/UIIP01/bdump/uiip01_arc1_9772.trc:
ORA-00272: error writing archive log
Mon Jul 14 10:57:36 2008
FAL[server, ARC1]: FAL archive failed, see trace file.
Mon Jul 14 10:57:36 2008
Errors in file /app/oracle/admin/UIIP01/bdump/uiip01_arc1_9772.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Mon Jul 14 10:57:36 2008
ORACLE Instance UIIP01 - Archival Error. Archiver continuing.
And then we see a ORA-600 on standby database related to this which complains about redo block corruption.
Mon Jul 14 09:57:32 2008
Errors in file /app/oracle/admin/UIIP01/udump/uiip01_rfs_12775.trc:
ORA-00600: internal error code, arguments: [kcrrrfswda.11], [4], [368], [], [], [], [], []
Mon Jul 14 09:57:36 2008
And the trace file has this wonderful block corruption error..
Corrupt redo block 424432 detected: bad checksum
Flag: 0x1 Format: 0x22 Block: 0x000679f0 Seq: 0x000006ef Beg: 0x150 Cks:0xa2e5
----- Dump of Corrupt Redo Buffer -----
*** 2008-07-14 09:57:32.550
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [kcrrrfswda.11], [4], [368], [], [], [], [], []
So ARC tries to resend this redo log again and it succeeds, end of the day all we have is a bunch of these ORA- errors in our alert logs, triggering off our monitors and these errors resolve themselves without any manual intervention, opened a tar with Oracle support as this is not affecting our primary database, they are in no hurry to get this one prioritized and also they are reluctant to accept that it's a bug that resolves itself.
Just wanted to get it out here to see if anyone experienced a similar problem, let me know if you need any more details.
As I said earlier this behaviour happens only during peak loads espceially when we have full 500M redo logs that are being archived.
Thanks in Advance.Thanks Madrid!..
I scoured thru these metalink notes before looking for possible solutions and almost all of them were closed citing a customer problem related to OS, firewall, network, etc or some were closed saying requested data not provided.
Looks as if they were never successfully closed with a resolution.
I just want to assure myself that the redo corruption that standby is reporting will not haunt me later, when I am doing a recovery or even a crash recovery using redo logs?..
I have multiplexed my logs, just in case and have all the block checking parameters enabled on both primary and standby databases.
Thanks,
Ramki -
Errors in Database Alert Log... Please Help
Hi All,
This database is on Oracle 8i but I found errors in the alert Log.
These errors are relating to archiving.
Please take a look at this file to see the details;
http://us.f13.yahoofs.com/bc/47aff3ab_a145/bc/My+Documents/Database+Alert+Log.LOG?bfUw9sHBkd_LbjY0
ARC0: Beginning to archive log# 11 seq# 301
Wed Feb 13 14:57:45 2008
ARC0: Completed archiving log# 11 seq# 301
Wed Feb 13 15:46:26 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03852.TRC:
Wed Feb 13 15:46:26 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03208.TRC:
Wed Feb 13 15:46:30 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03340.TRC:
Wed Feb 13 15:46:30 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA00784.TRC:
Wed Feb 13 15:46:31 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03748.TRC:
Wed Feb 13 15:46:32 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA01228.TRC:
Wed Feb 13 16:18:57 2008
Thread 1 advanced to log sequence 303
Current log# 13 seq# 303 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO13.LOG
Wed Feb 13 16:18:57 2008
ARC2: Beginning to archive log# 12 seq# 302
Wed Feb 13 16:19:25 2008
ARC2: Completed archiving log# 12 seq# 302
Wed Feb 13 18:40:13 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03872.TRC:
Please help out. What is exactly the cause of this error and how can I avoid it next time from occuring.>> Please paste the output of E:\Oracle\admin\MUKREC\udump\ORA03872.TRC
Click on the link below to get the output of the ORA03872.TRC trace file
http://us.f13.yahoofs.com/bc/47aff3ab_a145/bc/My+Documents/ORA03872.TRC?bfMq_sHBSRis64KA
>> and last 100 lines of alert log
the last 100 lines of the alert log are here under;
Wed Feb 13 11:50:27 2008
Thread 1 advanced to log sequence 296
Current log# 13 seq# 296 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO13.LOG
Wed Feb 13 11:50:27 2008
ARC0: Beginning to archive log# 12 seq# 295
Wed Feb 13 11:51:02 2008
ARC0: Completed archiving log# 12 seq# 295
Wed Feb 13 12:27:18 2008
Thread 1 advanced to log sequence 297
Current log# 7 seq# 297 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO07.LOG
Wed Feb 13 12:27:18 2008
ARC0: Beginning to archive log# 13 seq# 296
Wed Feb 13 12:27:59 2008
Thread 1 advanced to log sequence 298
Current log# 8 seq# 298 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO08.LOG
Wed Feb 13 12:27:59 2008
ARC1: Beginning to archive log# 13 seq# 296
ARC1: Failed to archive log# 13 seq# 296
ARC1: Beginning to archive log# 7 seq# 297
Wed Feb 13 12:28:33 2008
Thread 1 advanced to log sequence 299
Current log# 9 seq# 299 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO09.LOG
Wed Feb 13 12:29:10 2008
Thread 1 advanced to log sequence 300
Current log# 10 seq# 300 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO10.LOG
Wed Feb 13 12:29:11 2008
ARC0: Completed archiving log# 13 seq# 296
ARC0: STARTING ARCH PROCESSES
ARC2 started with pid=166
Wed Feb 13 12:29:11 2008
ARC0: STARTING ARCH PROCESSES COMPLETE
Wed Feb 13 12:29:11 2008
ARC0: Beginning to archive log# 7 seq# 297
ARC0: Failed to archive log# 7 seq# 297
ARC0: Beginning to archive log# 8 seq# 298
Wed Feb 13 12:29:12 2008
ARC2: Archival started
Wed Feb 13 12:29:32 2008
ARC1: Completed archiving log# 7 seq# 297
ARC1: Beginning to archive log# 8 seq# 298
ARC1: Failed to archive log# 8 seq# 298
ARC1: Beginning to archive log# 9 seq# 299
Wed Feb 13 12:29:48 2008
ARC0: Completed archiving log# 8 seq# 298
Wed Feb 13 12:29:48 2008
ARC2: Beginning to archive log# 9 seq# 299
ARC2: Failed to archive log# 9 seq# 299
Wed Feb 13 12:30:03 2008
ARC1: Completed archiving log# 9 seq# 299
Wed Feb 13 14:46:05 2008
Thread 1 advanced to log sequence 301
Current log# 11 seq# 301 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO11.LOG
Wed Feb 13 14:46:05 2008
ARC1: Beginning to archive log# 10 seq# 300
Wed Feb 13 14:46:41 2008
ARC1: Completed archiving log# 10 seq# 300
Wed Feb 13 14:57:10 2008
Thread 1 advanced to log sequence 302
Current log# 12 seq# 302 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO12.LOG
Wed Feb 13 14:57:10 2008
ARC0: Beginning to archive log# 11 seq# 301
Wed Feb 13 14:57:45 2008
ARC0: Completed archiving log# 11 seq# 301
Wed Feb 13 15:46:26 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03852.TRC:
Wed Feb 13 15:46:26 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03208.TRC:
Wed Feb 13 15:46:30 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03340.TRC:
Wed Feb 13 15:46:30 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA00784.TRC:
Wed Feb 13 15:46:31 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03748.TRC:
Wed Feb 13 15:46:32 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA01228.TRC:
Wed Feb 13 16:18:57 2008
Thread 1 advanced to log sequence 303
Current log# 13 seq# 303 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO13.LOG
Wed Feb 13 16:18:57 2008
ARC2: Beginning to archive log# 12 seq# 302
Wed Feb 13 16:19:25 2008
ARC2: Completed archiving log# 12 seq# 302
Wed Feb 13 18:40:13 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03872.TRC:
Thu Feb 14 08:03:54 2008
Thread 1 advanced to log sequence 304
Thu Feb 14 08:03:54 2008
Current log# 7 seq# 304 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO07.LOG
Thu Feb 14 08:03:55 2008
ARC1: Beginning to archive log# 13 seq# 303
Thu Feb 14 08:04:45 2008
ARC1: Completed archiving log# 13 seq# 303
Thu Feb 14 08:24:29 2008
Thread 1 advanced to log sequence 305
Current log# 8 seq# 305 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO08.LOG
Thu Feb 14 08:24:29 2008
ARC0: Beginning to archive log# 7 seq# 304
Thu Feb 14 08:25:01 2008
ARC0: Completed archiving log# 7 seq# 304
------------------------------------------------------------------------------------------------------------------------------------
Maybe you are looking for
-
After a crash, I've been given an new Library. My old one got moved into a random folder. It contains EVERYTHING. PROBLEM: I would like to replce the new given Library file that is empty of my eMails, contacts. settings, book marks etc .. with th
-
Question Marks in Dock on users network profiles
Hello everyone, I have a problem where my user's network profiles have question marks in their docks. I am running OS 10.4.10 Server on a MacPro with 6 Intel iMacs all running 10.4.10. When I installed the iMacs I used CarbonCopyCloner so all the sof
-
Email links are opening firefox
I did not change any preferences -- but every live url in an email is now opening in Firefox and I always use Safari I can't find anywhere in Mail to change what the default browser is and it is driving me nuts
-
Hi, One of my DEV database was recently upgraded to 11.1.0.6. The platform used is HPUX IA64. One of the procedure is running fine in Oracle 9i ( current production). The same procedure is hung in Oracle 11g. As per application team, there has been n
-
IORDER01 IDoc is sent without plant code from SAP ECC
Hi MEINT experts, Does anyone experience before on the service order integration between SAP ERP and SAP ME, somehow the IORDER01 IDoc is sent over with empty plant code embedded in the original document? (where we suppose to see <WERKS> data tag is