Create customcomponent for pdfwatermarking using any filter or service

Hi,
Can i create custom component for pdfwatermarking using any filters or service?
Thanks in advance

you have to ditch rules and go with a filter "prepareForFileResponse" and set a value for PdfwTemplateID based on your criteria (can be anything...).
make sure your filter is executed before the filter from pdfwatermark compoenent.
look into "pdfwfFileFilter.class" file
--search for prepareForFileResponse
--the code actually tried to pull "PdfwTemplateID" prior to evaluating any rules and if the id is null only then it evaluates the rules.
Edit:there seems to be some code bug(watermark version 11.1.1.3) ...the following line is evaluated only when PdfwTemplateID is null but is used throught the method.
drsPdfInfo = getDocInfo(ws, binder.getLocal("dDocName"), null, dIDContent);
Edited by: Bunty on Apr 5, 2013 10:16 AM

Similar Messages

You should also create directories for and mount any other partitions

Hi,
I've downloaded archlinux-2012.12.01-dual.iso and wrote it to USB. I've booted from that USB and set up partititons using command cfdisk.
/dev/sda5 ==> /boot
/dev/sda6 ==> /
/dev/sda7 ==> swap
/dev/sda8 ==> /home
I don't remember if I've created /mnt or if it was already there. I've created two directories: /mnt/boot and /mnt/home as per instructions:
"https://wiki.archlinux.org/index.php/Installation_Guide
Mount the partitions
We now must mount the root partition on /mnt. You should also create directories for and mount any other partitions (/mnt/boot, /mnt/home, ...) if you want them to be detected by genfstab."
I've mounted /dev/sda6 on /mnt
and now there are no /mnt/boot and /mnt/home under the /mnt
I don't understand what to do now because instructions state that I should create directories /mnt/boot and /mnt/home and mount them but now that I've mounted / on /mnt the /mnt/boot and /mnt/home are not available to mount partitions /dev/sda6 and /dev/sda8
Regards

mount /dev/sda6 /mnt
mkdir /mnt/boot
mount /dev/sda5 /mnt/boot
Then do pacstrap etc. Add /home to fstab before you reboot.
Alternatively you can mkdir /mnt/home and mount /sda8 there too, then genfstab will add the entry in fstab for it for you.
Last edited by Mr.Elendig (2012-12-18 14:27:48)

Can I create books for iPhone using iBooks Author?

Can I create books for iPhone using iBooks Author?

There is a new $5 iBooks Creator app in iOS app store for the iPad.
The output looked pretty good for an iPad app.
There is a video on how to use it to give you an idea of how easy it is.
It creates ePub 2 whihc can be read on all platforms with an ePub reader except Amazon Kindle whihc forbids such things.
You can run the ePub through Calibre and get MOIB for Kindle which works for me.
I have done thirty or forty conversions so far.

Sample code creating BOM for CS01 using BDC recording.

Hi,
Can anyone give me sample coding creating BOM for CS01 using BDC recording.
I want to display the flat file records,under one (Alternative BOM).
I m already working on it,but i m getting one A.BOM for each records.
[       Header data          ]    [      Item Data               ]
SOFTDRINKS   WIND   1       13            1     ml     l
SOFTDRINKS   WIND   1       11            1     ml     l
SOFTDRINKS   WIND   1       15        1     ml     l
SOFTDRINKS   WIND   1       14       1     ml     l
Code:
report ZBOM
       no standard page heading line-size 255.
*include bdcrecx1.
*DATA: BEGIN OF bdc OCCURS 0,
      matnr(18),
      werks(4),
      stlan(1),
     END OF BDC.
*DATA: BEGIN OF BDC1 OCCURS 0,
      idnrk(18),
      MENGE(18),
      MEINS(3),
      postp(1),
      posnr(4),
     END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
         matnr(18),
         werks(4),
         stlan(1),
         idnrk(18),
         MENGE(18),
         MEINS(3),
         postp(1),
         posnr(4),
      END OF BDCDATA.
data ibdcdata type standard table of bdcdata WITH header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              'SOFTDRINKS'.
perform bdc_field       using 'RC29N-WERKS'
                              'WIND'.
perform bdc_field       using 'RC29N-STLAN'
                              '1'.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(001)'
                              BDCDATA-IDNRK.
perform bdc_field       using 'RC29P-MENGE(001)'
                              BDCDATA-MENGE.
perform bdc_field       using 'RC29P-MEINS(001)'
                              BDCDATA-MEINS.
perform bdc_field       using 'RC29P-POSTP(001)'
                              BDCDATA-POSTP.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                               BDCDATA-POSNR.            "'0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              BDCDATA-IDNRK.             "'15'.
perform bdc_field       using 'RC29P-MENGE'
                              BDCDATA-MENGE.             "'1'.
perform bdc_field       using 'RC29P-MEINS'
                              BDCDATA-MEINS.             "'ml'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
clear ibdcdata.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO   = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR iBDCDATA.
    iBDCDATA-FNAM = FNAM.
    iBDCDATA-FVAL = FVAL.
    APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi,
      I tried with the sample code but i m not getting the required result.
    Can anyone give some other soln.
Code:
REPORT ZBOM2
no standard page heading line-size 255.
*include bdcrecx1.
TYPES: BEGIN OF TY_FLAT,      " structure for flat file
        STRING(200),
       END OF TY_FLAT.
TYPES: BEGIN OF TY_HEAD,     " structure for header file
        IND(2) TYPE N,
        MATNR(18),
        WERKS(4),
        STLAN(1),
       END OF TY_HEAD.
TYPES : BEGIN OF TY_ITEM,    "structure for item file
          IND(2) TYPE N,
          POSTP(1),
          IDNRK(18),
          MENGE(13),
          meins(3),
        END OF TY_ITEM.
TYPES :BEGIN OF TY_FLAT1,   " structure for final file
         MATNR(18),
         WERKS(4),
         STLAN(1),
         posnr(4),
         POSTP(1),
         IDNRK(18),
         MENGE(13),
         meins(3),
       END OF TY_FLAT1.
INTERNAL TABLE DECLERATIONS:
DATA : T_FLAT TYPE STANDARD TABLE OF TY_FLAT,
       T_FLAT1 TYPE STANDARD TABLE OF TY_FLAT1,
       T_HEAD TYPE STANDARD TABLE OF TY_HEAD,
       T_ITEM TYPE STANDARD TABLE OF TY_ITEM,
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA with header line ,
       T_BDCMSG TYPE STANDARD TABLE OF BDCMSGCOLL.
WORK AREA DECLERATIONS:
DATA : ST_FLAT TYPE TY_FLAT,
       ST_FLAT1 TYPE TY_FLAT1,
       ST_HEAD TYPE TY_HEAD,
       ST_ITEM TYPE TY_ITEM,
       ST_BDCDATA TYPE BDCDATA,
       ST_BDCMSG TYPE BDCMSGCOLL.
VARIABLES:
DATA : FNAM TYPE LOCALFILE,           "rlgrap-filename,
       FTYP TYPE RLGRAP-FILETYPE,
       LF_FNAM TYPE STRING.
DATA : V_IND(2) TYPE N,                " value 1,
       V_FLD(20),
       V_NO(2) TYPE N.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = T_FLAT
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_FLAT INTO ST_FLAT.
SPLIT ST_FLAT AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
INTO ST_FLAT1-MATNR ST_FLAT1-WERKS
ST_FLAT1-STLAN ST_FLAT1-POSTP
ST_FLAT1-IDNRK ST_FLAT1-MENGE ST_FLAT1-MEINS.
APPEND ST_FLAT1 TO T_FLAT1.
CLEAR ST_FLAT1.
ENDLOOP.
SORT T_FLAT1 BY MATNR WERKS STLAN POSTP IDNRK MENGE MEINS.
LOOP AT T_FLAT1 INTO ST_FLAT1.
MOVE :
ST_FLAT1-MATNR TO ST_HEAD-MATNR,
ST_FLAT1-WERKS TO ST_HEAD-WERKS,
ST_FLAT1-STLAN TO ST_HEAD-STLAN,
ST_FLAT1-POSTP TO ST_ITEM-POSTP,
ST_FLAT1-IDNRK TO ST_ITEM-IDNRK,
ST_FLAT1-MENGE TO ST_ITEM-MENGE,
ST_FLAT1-MENGE TO ST_ITEM-MEINS.
AT new STLAN.
ADD 1 TO V_IND.
ENDAT.
MOVE V_IND TO ST_HEAD-IND.
MOVE V_IND TO ST_ITEM-IND.
APPEND ST_HEAD TO T_HEAD.
APPEND ST_ITEM TO T_ITEM.
CLEAR ST_HEAD.
CLEAR ST_ITEM.
ENDLOOP.
CLEAR V_IND.
*perform open_group.
SORT T_ITEM BY IND.
SORT T_HEAD BY IND.
DELETE ADJACENT DUPLICATES FROM T_HEAD.
LOOP AT T_HEAD INTO ST_HEAD.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              ST_HEAD-MATNR.
perform bdc_field       using 'RC29N-WERKS'
                              ST_HEAD-WERKS.
perform bdc_field       using 'RC29N-STLAN'
                              ST_HEAD-STLAN.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
LOOP AT T_ITEM INTO ST_ITEM WHERE IND = ST_HEAD-IND.
ADD 1 TO V_NO.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-MENGE(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                              ST_ITEM-IDNRK.
perform bdc_field       using 'RC29P-MENGE(01)'
                              ST_ITEM-MENGE.
perform bdc_field       using 'RC29P-MEINS(01)'
                              ST_ITEM-MEINS.
perform bdc_field       using 'RC29P-POSTP(01)'
                              ST_ITEM-POSTP.
CONCATENATE 'RC29K-IDNRK(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-IDNRK.
CONCATENATE 'RC29K-MENGE(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-MENGE.
CONCATENATE 'RC29K-MEINS(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-MEINS.
CONCATENATE 'RC29K-POSTP(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-POSTP.
V_NO = 1.
ENDLOOP.
CLEAR V_NO.
*perform bdc_dynpro      using 'SAPLCSDI' '0130'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'BDC_CURSOR'
                             'RC29P-POSNR'.
*perform bdc_field       using 'RC29P-POSNR'
                              POSNR.
*perform bdc_field       using 'RC29P-IDNRK'
                             bdcdata-IDNRK.
*perform bdc_field       using 'RC29P-MENGE'
                             bdcdata-MENGE.
*perform bdc_field       using 'RC29P-MEINS'
                             bdcdata-MEINS.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                                 'X'.
perform bdc_dynpro      using 'SAPLCSDI' '0133'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-matkl'.
perform bdc_field       using 'RC29P-SANKA'
                                 'zv01'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
*perform bdc_transaction using 'CS01'.
perform close_group.
CALL TRANSACTION 'CS01' USING t_bdcdata MODE 'A' UPDATE 'S'.
REFRESH t_bdcdata.
clear t_bdcdata.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR st_bdcdata.
st_bdcdata-PROGRAM = PROGRAM.
st_bdcdata-DYNPRO   = DYNPRO.
st_bdcdata-DYNBEGIN = 'X'.
APPEND st_bdcdata to t_bdcdata .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR st_bdcdata.
    st_bdcdata-FNAM = FNAM.
    st_bdcdata-FVAL = FVAL.
    APPEND st_bdcdata to t_bdcdata.
ENDIF.
ENDFORM.

Can't Create PDF "from file" using any MS Office files

Acrobat 8.1.1 Pro. (OS = XP), as part of the CS3 premium edition.
I can no longer get Acrobat to recognize any of the MS Office applications extensions (.doc, .ppt, etc...) for use with either Create PDF "From File" or when using the Combine Files feature to Merge or Package. The extensions are no longer even listed as an option in the dialog box, or in the Preference settings under "Convert to PDF".
FYI- I can still use the PDF Maker functionality from within the MS Office application to create a PDF.
Any Idea what could have happened, or more importantly how to fix?
***Update***
I have re-installed the Acrobat 8 application, and the problem still exists.
I'm truly puzzled.

I get this with my PC and I ran detect-repair and reinstalled. Some PDF's I can open and other's I cannot. I can send the email to a cohort and they can open fine.
"Can't create file: Right-click the folder you want to create the file in and then click Properties on the shortcut menu to check your permissions for the folder"
Any ideas would be great.
Thanks!

Creating IDOC for article using BD10 tcode

Hi Excperts,
we are creating idoc for the articles using bd10 tcode.
we are using idoc type ARTMAS05. But system not filling the segment E1BPE1MLEART Retail Data Transfer: Vendor-Specific EANs . Could you anyone help me , why sap standard program is dropping this segment.
do we need set up any data in material master for his segment. .
you will be rewarded.
Regards
Rama.

Hi Rama,
Generally if the segment is not being filled it is because the values do not exist.
The segment is not mandatory. So your IDoc should still be created.
Try:
By selecting the Send material in full indicator, you can also distribute the following dependent data for the material (depending on the type of system) in addition to the actual material master data:
Retail system
Listing conditions
Purchasing info records
Source list records
Purchasing conditions
Sales conditions
BOM allocations
Best regards,
Glynn

Create Budget for Grants Using BAPI_0036_CREATE

Hi Gurus,
Is there any people using BAPI_0036_CREATE to create budget for grants before? I use the test data to run it in test run mode, it is ok. But when I try to run it in batch commit mode, it always has error: "No instance of object type BudgetEntryDocGM has been created. External reference:" and "Specify grant". Definitely I already specified grant and external reference in both header and item input tables. If you ever use this BAPI before, please give me some suggestion.
Thanks,
Ryan

Well, it looks like customizing. The long text for FMKU 026 includes:
The customizing settings require that you specify a as an FM account assignment element. You did not enter a in your budget entry.
(It seems to be saying you have to add a grant somewhere in account assignment). This may also help with the other message.
There are also some notes for this BAPI.
Rob

How to create global Contact list using OSX Server Contacts Service?

My goal is to create a global contact list for the use of my department at work. We currently have 5 MBP's and a Mac Mini Server running OSX Server.
I have read so many forum posts and so called "solutions" that my head is completly spinning... like a record... right round... you get the idea.
I talked with Apple Support, and they are going to walk me through the process of changing our network from "local" to a legitimate internet network. Enabling DNS and setting up open directory are some of the steps, and all in all i was impressed with the support i received. We did a complete walkthough of all the steps it would take to change everything, without actually making any changes (because I could not shut down the company server at the time I called).
All that being said, I have been reading that actually creating and sharing a global contact list (and enabling specific user access for read/write for said list) is not as simple as Apple is telling me. I have read so many horror stories about not being able to edit the list, having duplicate lists and entries, and many other problems. It seems that this "Contact Service" is not really what its billed as.
Im just looking for someone who has this already setup to shine some light on my questions/concerns. I have scoured the internet for information, and either i'm looking in the wrong place or I just happen to have the WORST possible combination of OS X versions, server versions and so on. I would expect a company who charges such high prices for its products to design them to ACTUALLY WORK how they are advertised to work!
Thanks in advance and a thousand kudos to anybody that can help!!!
-John

That sounds like one viable option...
The only problem is that I'm not sure how that would behave once the client MBP's are taken off site and connect to the network over a VPN or something of that sort.
I figure since we have purchased the Server App and it contains the Contacts Service, I should try and get it to work that way (through that specific service on the server app).
I would really prefer to not have to install yet another piece of software just to do something that should already work (or have the ability to be configured to work). None of us here are "Power Users", and we are all learning as we go and I got the role of the "IT Guy" when it comes to setting everything up. I'm dealing with lifetime Windows users here, and I feel there is a need to keep everything literally as easy as possible to use.
I will keep your solution in the front of my mind though, as it sounds like that may work. I am not exactly 100% familiar with the OSX Server or the Mac OS yet, and I'm not positive where you would add the users (I couldn't just sit down and do what you suggested, i unfortunately would need a step by step solution so I don't fuss up our entire system).
If you feel like giving a step by step, that would be awesome just for future reference or for anyone else having similar problems. If not, I don't blame you at all.
Thanks for your reply, and if I find a clear-cut solution I will post it here!
Thanks,
J_Semp

How can I create a Glow without using a filter

I am creating an application for iPhone4, and one of the problems I am having is the lack of filter support.
I am trying to create a "stroke" around some bitmaps... an example would be a text field that is white on a bright background - I would put a black stroke around it to contract it... there are other needs as well, but this is an example.
Before, I would just put a glow filter on the text field, tweak the settings and it looked good and did exactly what I wanted.
But iPhone4 high resolution with gpu acceleration don't support filters - and I can't change those requirements... so any and all bitmap filters are out.
Does anyone know of a way I can create a glow filter effect without using filters that would not be a major preformance hit for fps and memory?

Have you tried using tweenMax and code in a glow effect.
Something like this:
import com.greensock.*;
import com.greensock.plugins.*;
TweenPlugin.activate([TintPlugin]);
var glowEffect:TweenMax = new TweenMax(mc,0,{glowFilter:{color:0x330000,alpha:1,blurX:5,blurY:5,strength:2,quality:2,ov erwrite:5}});

Error when create schemas for webcenter using URM.

Hi,
I use Oracle Urm to create necessary schemas for Webcenter. Everything goes well when I create the tables.
However, when I extend my domain with Webcenter, comes to the database connection testing step, the tests always fail.
It said: A connection is establish but no result received from the Test query.
I ignored the test but then later, start the WLS_Spaces manage server, the server can't start because of database error, the needed tables not found.
I use SQl Developer to connect to the database but can't see those newly created tables.
But during the URM step, nothing went wrong.
Can you help me with this?
Thank you very much.

Hi Heather,
The reason that you are receiving this error is because the niscope.h file (called by niScope.fp) uses a struct which cannot be compiled into a DLL. This means that the niScope.fp file cannot be included in the target settings. Here's a knowledgebase that describes the error.
http://digital.ni.com/public.nsf/websearch/AC028D9586E947F08625661E006A182F?OpenDocument
If you do want the niScope.fp file to be included then you will need to make some modifications to the niscope.h file and create a typedef for the niScope_wfmInfo struct. Here's info from the help file that describes the type library section and the use of the .fp file.
"Type Library—This button lets you choose whether to add a type library resource to your DLL. Also, you can choose to include links in the type library resource to a Windows help file. LabWindows/CVI generates the type library resource from a function panel (.fp) file. You must specify the name of the .fp file. You can generate a Windows help file from the .fp file by using the Generate Windows Help command in the Options menu of the Function Tree Editor window.
This feature is useful if you intend for your DLL to be used from Visual Basic."
If you do not include the niScope.fp file then you will be able to compile the DLL.
Hope this helps! Let me know if you have any questions.
Erick

Help create VLAN for home use.

I use Cisco switch SG300 and SG200 series. I set my home network as attach picture.
I want set up VLAN with these condition
1.Every port can connect to internet through ADSL router.
2.VLAN10( Home alarm and IP camera ) can access by internat, connect by access point and PC file server
3.Every port can connect the PC file server
I am new for network and fail to try setup myself and not understand static route.
Thank you.
Jarey
[email protected]

Hi Jarey,
Are you sure you want to do this on the switch as opposed to the router? Are you going to use static IP addresses for the vlans or do you want your router to issue DHCP?
To proceed, using the switch for inter-vlan routing, make sure the SG300 is in layer 3 mode.
1. If you are currently in layer 2 mode, open a CLI connection and issue command:
set system mode router
Take note that this will delete your current config and the switch will reboot.
2. Create the vlans on your switch under VLAN Management -> create vlan
3. Go to IP Configuration -> ipv4 interface and assign each vlan a static IP for the switch in the subnet for the new vlan
4. Vlan Management -> Interface settings. I would leave all the ports as trunk ports, or change the ports to trunk if you have previously changed them.
5. Vlan Management -> Port VLAN membership. Assign your vlans to the appropriate ports.
6. When everything is all plugged in, you should be able to see the switch created static routes for you already under IP Configuration -> IPV4 static routes. Make sure all your subnets are there and are showing route type local
7. You may need to add a route such as 0.0.0.0 with the next hop being your router
At this point, you should be up and running, with all vlans connected to each other and to the internet.
If you want to restrict access across the vlans, you'll have to create access control lists.
You need to first create an ACL (Access control -> IPV4 based ACL) and give it a name. then go over to IPV4 based ACE where you put the actual access control rules.
This is a sample set of rules I made, it will block all access between two subnets (each vlan you created above will have to be its own subnet) and allow certain traffic such as 3389 - remote desktop, etc. You'll need to customize based upon your needs and subnet IPs. So for ex, to allow the Xboxes to access the file server, rather than any - any, you put the xbox subnet or specific IPs as the source, the file server as the destination, and the ports used as source ports. Remember to make the converse of the rule as well.
Then, go to Access Control -> ACL bindings and bind the access control list to the applicable ports.
Hope that helps, good luck with your set up.
Best,
David
Please remember to rate helpful posts and identify correct answers.

How to create bdc for fbs1 using both call transaction and session

Hi Friends,
i have one problem with tcode FBS1, i need to create a bdc program for both call transaction and session method using subroutine.
first call transaction needs to execute if there is an error sesion has to execute. if u have code please forward.
thanks in advance.
chandramouli pothugunta

where as in call transaction we can do error handling explictly.those errors are stored in one file .this file will send to the error log(session method),i.e session log.
in the above case we use both call transaction n session method at time in one program.sample code is below ,go through it .
data : begin of itxk01 occurs 0,
end of itxk01.
data : bdcdata like itbdcdata occurs 0 with header line.
data : itbdcmsgcoll like itbdcmsgcoll occurs 0 with header line,
itxk01 like itxk01-dup occurs 0 with header line.
call gui-upload.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call transaction 'xk01' using bdcdata mode 'a' update 's' messages into itbdcmsgcoll.
if sy-subrc ne 0.
append itxk01 into itxk01-dup.
endif.
endloop.
if not itxk01-dup[] is initial.
refresh itck01.
call bdc_open_group
itxk01 = itxk01-dup.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call bdc-insert.
endloop.
call bdc-close-group.
form bdc-dynpr0 using pr sc
endform .
form bdc-field using fnam faval
endform.
this will help u.
reward points for me
kiran

Problem in creating AppsDataSource for EBS using fnd user with APPS Schema connect role

Hi,
I have done all the setup on EBS R12.1.3 like apply patch for additional profile options, set required profile options, generated DBC file for external node and some entry in FND_NODES table. I have rebuilt the fndext.jar file on external server, and placed it at required path. after doing all these we created fnd user with UMX/APPS_SCHEMA_CONNECT role but I'm not able to create DataSource every time I'm getiing invalid username/password error, properties my connection are below:
Driver Class Name:: oracle.apps.fnd.ext.jdbc.datasource.AppsDataSource
Properties:
user=ASYSTEM
dbcFile=D:\adf\VISI121_FCN15152-L.INDIA.RAPIDIGM.COM
Database user name as FND user name and FND user's pwd
Error Stack:
<Dec 10, 2013 5:40:37 PM GMT> <Error> <Console> <BEA-240003> <Console encountered the following error java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:397)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:389)
at oracle.jdbc.driver.T4CTTIfun.processError(T4CTTIfun.java:689)
at oracle.jdbc.driver.T4CTTIoauthenticate.processError(T4CTTIoauthenticate.java:452)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:384)
at oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:811)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:411)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:678)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:238)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:288)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:208)
at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:789)
at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:262)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:134)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
Please help.
Regards,
Reetesh Sharma

I'm trying to create EBS DataSource to integrate ADF application with EBS, for this I have followed steps mentioned in Document 974949.1 but still I'm not able to move forward.
Why? What is the issue?
For this Do I need to install Oracle E-Business Suite AccessGate. But this is not mentioned in Metalink Doc. This I'm trying on Weblogic server on Windows.
AccessGate requires extra steps for EBS integration as mentioned in (Integrating Oracle E-Business Suite Release 12 with Oracle Access Manager 11gR1 PS2 (11.1.1.7.0) using Oracle E-Business Suite AccessGate (Doc ID 1543803.1)) which I believe is not required here.
Thanks,
Hussein

Create view for Material using BAPI_MATERIAL_SAVEDATA

Hello. I need create Accounting View(1&2) and Costing View(1&2) using FM BAPI_MATERIAL_SAVEDATA, but i don't now who importing values are required for this...
please HELP!!!!

Hi,
Check this link.
http://sap-img.com/abap/bapi-to-copy-materials-from-one-plant-to-another.htm
Thanks,
Anitha

Creating "bookmarks" for most used functions?

Is there a way to create a home page "bookmark" for functions you use a lot, such as turning WiFi On and Off? Or alternatively, does anyone know of an app that would allow you to do that? It would be extremely handy and would save us from having to click multiple times to access common features.
Thanks!

Sounds like the Full Screen mode is turned on - hit '''F11''' to turn it off.

Create customcomponent for pdfwatermarking using any filter or service

Similar Messages

Maybe you are looking for