Create Customer with Account group ZO05 to BP
Dear RE Experts,
In my project there are three scenarios related to BP and Customer.
1) Create BP with Account Group Zo05 to Customer (Which is Working)
2) Create Customer With Account Group Zo05 to BP
3) Create only Customer (No BP) With Account Group ZO01,ZO02,ZO03,ZO04,ZO06 and ZO07
I want help from Experts how to create last two scenarios in RE? What configuration is need?
What is Tcode to create only customer?????
Thanks in Advance...
Manzoor
Hi,
Goto SPRO\Cross-applications components\master data synchronization\synchronization control
check whether is it activated from cutomer --> BP
And also check the following setting
Goto SPRO\Cross-applications components\master data synchronization\customer&vendor integration\business partiner settings\settings for customer intration\define BP role for direction customer to BP
might be it will give some solution to your 2nd problam and finall fir 3rd issue you can use XD01 to create customer and don't assign these account groups in "Define BP role for direction customer to BP"
Srini
Similar Messages
-
Function Module to Create Customer using Account Group
Hi All,
Is there any BAPI Function module that uses the Account Group to create a customer. We are using the FM BAPI_CUSTOMER_CREATEDATA1, but this is not using the Account Group.http://www.erpgenie.com/abap/bapi/example.htm
Customer creation using BAPI with given customer number
Please give me reward points... -
Check while creating PR with account assignment K
Hi Gurus,
Can I put a check while creating PRs for account assignment category K, that only statistical order number range is allowed.
In other words, user should not be allowed to put any internal order other than statistical order in PR, while creating it with account assignment category K..
Thanks in Advance,
VikashHi,
You can check on business transaction RMBA - it's the purchase requisition. Set it to prerequisites and for the validation select the order type (it's better than a number range - I believe you use different order types for real/statistical I/O) from AUFK (you will see this structure as available, when creating a validation). If you do use the same order type, then check on I/O itself COBL-AUFNR.
Regards,
Eli -
GL account created in wrong account group
Hello I have a GL account created in wrong account group? Some transactions have been posted to this GL account already. How can I reconcile the transaction if I want to create it in the correct account group?
Best Regards
PrabinHello,
Create a new GL account, post your future postings to that.
Make a transfer entry from old GL to new GL.
Block the current GL for future postings.
Regards,
Ravi -
Create Customer with reference
Hi,experts
We want to create customer with reference.
Use the t-cd:XD01 and put a customer code at reference area.
But can't copy the company name,Search term 1/2,Street address.
How can I copy that data??
Or can't copy these data??
Regards,
SaekoDear,
For Any Two company, There are not possible to same name, same address. That's why system do not get the company name,Search term 1/2,Street address.
You can enter manually this data at the time of creation of XD01.
Hope it will help you.
Regards,
Sandip -
Is it possibe to create PO with account assignment catagory "U" and B
Hi all,
Is it possibe to create PO with account assignment catagory "U" and B combination with material or without material code?
if yes then what are the setting requried ?
Secondly can we do GR for this combination? if yes what are the setting requried ? at the time of GR can we assign WBS element?
Regards,
AnilAnil,
Typically Item category B can only be used without material code.
Item category B means you are using Limit PO's ( typical usage of Limit PO : If you wish to make provision in the PO for services that are not precisely definable during the planning phase of a procurement project, set a money limit instead of entering a service description. This limit, which represents a budget for unplanned services, must not be exceeded. The service can be specified later - perhaps at the time of actual performance)
For standard Limit PO's GR is not done. You enter Serrvice under Service entry sheet.
What item category/ Account assignment is used depends on how you have done the config in SPRO>MM> Purchaisng--> Account assignment.
I am sure this gives you good idea of what the possiblities are.
Thanks,
Ram -
Problem with Account Group while creating a Customer
Dear Friends,
I am trying to create a customer with a specific Account Group. But when I try to save this customer I get an error message
Acct group XXX uses internal no.assignment; leave blank.
I have copied my account group (XXX) from 001 Sold-to-Party.
Request you to please guide me why this error is and what is the resolution for the same.
Regards,
Lalit Kabra
PS : Pardon me for basic question as I am trying to learn SD.Hi,
This error means this Account group has the number range which is internal(Sold to party has the Internal assignment only). This means system gives the number automatically. If you want to use your own numbers ,them you change the assigned number range, go to "OVT0" and select the number range which is external. This should solve your problem.
Regards
Ram Pedarla -
Create customer with reference to customer master
Hi,
If the user creates customer master (XD01) with reference to another customer master then system should not copy some of the fields. How can I restrict this in SAP. Is there any Copy control functionality for customer master to customer master?
Regards,
SoumenHello,
As far as i know in Standard SAP system, when we are copying or even creating a Customer
Master Recording in XD01 with reference to a customer, in case of the basic data i.e. General Data, the
datas that are copied are
1. Country.
Under Company Code data, the following are copied,
1. Reconcilation Account.
Under Sales Area Data the following are copied,
1. Currency.
2. Shipping condition.
3. Account assignment group.
4. Taxes.
Regarding your question, you can change the data and there is no concept of copying control here.
Regards,
Sarthak -
Customer/vendor account group
Hi Gurus,
After creation of a customer/vendor, how can we check that under which account group we have configured this customer/vendor?
Thank You,
Graham.s.Hi ,
When you create vendor groups are created with accordance of recon accounts so whenever you want to see your vendor postings are in which GL or group you can check in Vendor master display XK03 or FK03.
thanks -
Vendor Number Range relation with account group.
Dear All,
I have one more doubt. Kindly clarify.
I know that account group and vendor number range and linked with each other. Number range can be assigned to one or many account groups. Let's consider a case where 3 Account groups (assume X,Y & Z) have one common number range. When we create a vendor, in an account group (for example, X) vendor code assigned internally is 100000.
Subsequently if we create another vendor in the account group Y, will the vendor code assigned intenally be, "100001", considering intervals to be of 1 or any other number falling in the number range assigned to this account group?
Does there lie any rule or method which assign the code in this manner or any other...?
EnjoySAP,
ThanksHi,
When a vendor master record is created, a unique number identifying the master record is assigned. The number comes from the number range provided for the account group.
Internal number assignment
Here the SAP R/3 System automatically assigns a consecutive number from the number range defined, irrespective of any number of account groups attached to which the number range has been assigned. -
OIM 11g - Error Creating Custom 'Service Account' Field
Hi experts,
we would like to create a custom "Service Account" checkbox on a Form Provisioning, in way to enable\disable the 'service account'
status on a target account.
We wanto to control the 'Service Account' status through a checkbox into the account form.
Here our steps:
- Create a new Field on 'UD_ADUSER' Form, we add a 'Service Account' CheckBox as boolean type with default value = 0.
- Create a new Adapter 'Service Account':
---- into 'Variable List' tab we define 2 variables: ProcessInstance -> Long and ServiceAccountCheckBox -> boolean
---- into 'Adapter Task' tab we define an IF(ServiceAccountCheckbox == 1) launch tcUserOperationsIntf.changeToServiceAccount method, with our variable 'ProcessInstance' as Input
- Create a new task into 'Process Definition', we created 'Service Account Updated'.
---- into task tab named 'Integration' we set our custom adapter, mapping Process Data > Process Instance and Process Data > Service Account with adapter variables.
When we assign an 'AD User' resource to a user, the new checkbox 'Service Account' is showed into the form.
If we check/uncheck the checkbox the task 'Service Account Updated' is launched, but the response is "*Specified User Account Not Found*"
I think that the problem is into the adapter..
Any one can help us?
Best Regards
ATAs I said map user key(usr_key) and process instance key(orc_key) form design console
and use below query to get oiu_key
prockey=<PROCESS_INSTANCE_KEY>;
user_key=<USR_KEY>;
String sqlquery="select oiu_key from oiu " +
"where ORC_KEY = prockey " +
"and usr_key = user_key" ;
Connection con=Platform.getOperationalDS().getConnection();
Statement st=con.prepareStatement(query);
ResultSet rs=st.executeQuery();
while(rs.next())
long oiuKey=rs.getLong("oiu_key");
now pass this key in the method -
BSP - Client with Account Group
Hi all,
we just finished upgrading our Support Package to level 10 (SAPKU40010) and we get now a new problem with BSP application. Everytime the BP is created via BSP application, the screen stays in "Change" mode and furthermore there is a Bdoc errormessage that the MasterData is locked by user. Because of this errormesage the account group of the BP is not automatically fully sent to R3. Reprocessing of this errormessage does not always work, firstly if the user still stay in the screen and secondly the account group also does not fully sent to R3.
The creation of the BP via the CRM GUI works well and the account group is fully sent to R3 regardless the errormessage. Thus it is actually real BSP problem.
Does anyone ever get the same problem? And how to solve this because we do not get this kind of problem with the previous Support Package.
Best regards,
Audrey N. TamaraWelcome to SDN.
may be try this in CRM forum for a quicker resposne.
SAP CRM: Webclient UI - Framework
Regards
Raja -
Change customer / vendor account group
Hi,
I want to change the account group of a vendor. I tried XK07, but I then get a message about "Critical field groups" that would be switched off in the new target account group and then SAP doesn't let me change the account group.
The "critical field groups", however, are not critical to me at all and they are not relevant to my vendor master account. Does anyone know how to proceed in this case and if it's still possible to change the account group?
Thanks in advance.
RenéHi Henri,
I have the following field switched off:
A D110A Address 002 Form of address
052 c/o name
058 Buildings
059 Floor
060 Room number
078 Delivery district
102 P.O. box without number
107 Undeliverable Street
A D110A Address 108 Undeliverable Postbox
A D120 Control 021 International location number
026 Existing quality assur.systems
037 Reference account group (OTA)
045 Carrier details
046 Transport statistics
055 Business Place
067 Tax categories
A D120 Control 106 Proof of delivery
110 Procurement Monitoring
A D130 Payment transactions 033 Alternative payee in document
035 ISR Subscriber Number
Could you provide me with the correct code to change this account??
Thanks -
ISE: create rules with AD groups for Users and Computers
Hello,
We've just begun to work with ISE.
Is it the good place to post on ISE, or there is a dedicated forum in another place?
We'd like to create some rule depending of Computer member groups AND Users member groups from AD, but we meet some difficulties.
We've created AD groups for Computers and Users depending of their Department:
Users_1
Users_2
Computers_1
Computers_2
When we create some basics rules regarding one group only:
- with a group Computers_x to attribute a specific VLAN to a computer (when no Windows session is opened), it runs correctly.
- with a group Users_x to attribute a specific VLAN to an user (when Windows session is opened), it runs correctly.
But when we create a rule regarding a group from Computers and one from Users, to attribute a specific VLAN to an user on a specific computer, this rule is not applied.
Is it possible to use ISE on this way?
Thanks for help.
Regards,
ChrisEnable EAP Chaining— if you want Cisco ISE to allow authentication of both machine and user in the same EAP-FAST authentication.
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_80_eapchaining_deployment.pdf -
BAPI create customer with search term 2?
Hi all,
I'm looking for a BAPI/FM, which can create customer master record with 'Search term 2' input field. Pls let me know the BAPI/FM name if you know.
Regards,
Hung.Hello Hung,
SD_CUSTOMER_MAINTAIN_ALL is used in standard during the maintenance of a consumer using the standard customer master data transaction XD01 & XD02.
It is not intended to be used out of the transaction and in no case it should be used out of its original context. Due to the specificity of the function module, out of the original context we may face limitations and data inconsistencies.
For the maintenance of customers, there is NO BAPI and NO direct function module.
There are some functions modules like the one above where the name is looking nice. But these should not be used.
Below ECC 2005 (6.00), the only solution was batch input and DEBMAS idocs. See [note 384462|https://service.sap.com/sap/support/notes/384462]
Starting with ECC 2005 (6.00) and above: a synchronisation tool has been introduce. See class CMD_EI_API and VMD_EI_API
Hope this helps
BR
Alain
Maybe you are looking for
-
I was told to come here for the Mac Experts
Here I am needing some advice. For the people who really know what they are doing and like helping others by sharing the advice, my hats off to all of you. If we all shared a bit of our knowledge we learned from other sources, this place would be muc
-
Some fields in table is not available in target fields(B1) DTW
Dear Experts/Gurus, I have a problem relates to data transfer workbench (DTW) SBO 2005A SP 01 PL 18. It is about unavailability of a certain field that is profitcode or distr.rule in JDT1 table. It is required field and there are many transactions an
-
Universe is recamonded on cubes or query
Hi is SAP recamonded build universe based on OLAP cubes or queries (bex analyzer queries) if i connect cubes, can i get all functions in BO ( like functions in bex analyzer, variables...) please let me know
-
SUN Cluster.PMF.pmfd Failed to stay up
Dear All, Please help I am facing problem and unable to start sun cluster concurrent manager resource group it is showing me status "starting" but unable to start please find below the log Oct 16 14:06:24 iat-dc-ebpdb02 Cluster.PMF.pmfd: [ID 887656 d
-
I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?