Create Data Source for hierarchy

Hi all,
Can any one tell me how to create Data Source for hierarchy for the object (for example 0MATL_GROUP)?
Kindly Help,
Thanks
Laura Gómez

Hi Laura
with BI7 this feature is not yet supported. Try with 3x datasource

Similar Messages

Doubt in Generic data sources for hierarchy & text

Hi All,
I have a couple of doubts as mentioned below.
1 . Why we canu2019t generate generic data source for hierarchy?
2. While creating Generic datasource for text there is one more option is available i.e. "Extraction from domain"
what is domian please explain .
Thanks & Regards,
Saurabh Bansal

Hi,
1.We can't maintain Hierarchies in ECC, Because the Database design of the OLTP system is based on ERM(Entity Relationship Model),i.e Tables are connected via Primary and Foriegn key relationships, Whenever we need 1: Many connection divide the data in different tables,connect them using the primary and foriegn key relationships.
2. Domain will provide the technical properties of the Field of the R/3 table.
for Eg: length,data type of the field.

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Creating data source for planning area

Hi Experts,
Can you please help me by providing steps to create data source for planning area.
Thanks in advance for your help.
Regards,
Brahma

Hi Brahma,
Please follow below link....
http://help.sap.com/saphelp_scm50/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Hope this may help
Regards,
Harshil Desai

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

Creating Data Source for Variant Configuratior characteristics.

I'm trying to create a data source for material classification that is using the Variant Configurator. In transaction CTBW I'm using the following:
- Basis datasource = 0MATERIAL_ATTR
- Client 150
- Class Type 300 for Variants.
- Obj Table = MARA
- Data Source Type = ATTR
I then get the following error messeage:
"Object type is not a sheet type in the class type".
Dose any one understand this message or how I should create the datasource for this classification?
Thanks for your help.
Denny

Thank you very much for your response. Can you tell me how you found this explanation of this error? I tried searching OSS and did not find anything.
Ok, so since 0material can have multiple values I cannot use CTBW to extract the values.
My company is using the variant configurator on a material number 'EXTND_WARRANTY' in R/3. This material is defined as a configurable material. The Class is 'ZEW_SOFTWARE' with the following characteristics:
-Material Number
-License Key
-Maintenance Length
-Coterminous Enddate MM/DD/YYYY
In BW reporting we need to show the material 'EXTND_WARRANTY' with the value of the characteristic Material Number.
Can you tell me how I can accomplish this?
Thank you.
Denny

HOW TO CREATE DATA SOURCE FOR MAXDB

hi,
i am using hibernate in NetWeaver with maxdb.
i have to give datasource name in hibernate.cfg.xml
but i do't know how to create datasource for maxdb.
please help me.
Thanqqqqqqqq
Guru

The following link gives u how to create data source
http://dev.mysql.com/doc/maxdb/en/84/1d733cefd63c38e10000000a114084/content.htm

How to create data source for MySql

I m new to Creator. I m trying to connect it with MySql4.1. but the connection is not succeeding. I m using Java Connector to MySQL with jdbc 3 support. user name root.
Wht will be the connect url.
as my database name is cdap.

Hi,
Below are the steps to create mysql datasource
1.Right clcik on the 'data sources' in the Server Navigator and choose 'Add Datasource"
2.Click on the dropdown and choose <Add server type>. opens a 'Edit database Server types"
3.Click on New and choose the mysql driver(ie .jar file) .Then click on suggest to get the driver class name. click on close
4. You come back to 'Add Datasource' window.
5. Provide the username, password and the
url=jdbc:mysql://localhost/your database name, click Add
MJ

Unable to create data source for planning via workspace

I have installed the following products in Hyperion 11.1.2
- Foundation
- Essbase, EAS
- Planning
- Reporting & Analysis
However, when I log in to Workspace (http://server:19000/workspace, I only see the following menu options under Navigate -> Administer
-Shared Services Console
-Workspace Server Settings
-Manage preferences
There is another menu item Navigate->Open Items which is grayed out.
I am able to create the Planning application via http://server:8300/HyperionPlanning/AppWizard.jsp url but unable to do that via workspace.
Any help regarding why I do not see the other menu options under Navigate->Administer would be highly appreciated.
Edited by: user12209997 on Dec 14, 2010 1:30 AM

Try running the configurator again and go through "Foundation > Configure web server", I would then restart the services in the correct order and see if that helps.
Cheers
John
http://john-goodwin.blogspot.com/

Hierarchy Data Source for CO_PA

Hi
Please list me the steps to create Hierarchy Data Source for CO_PA
 Create Hierarchy Data Source Profitability Analysis KEB0 ???????
Thanks

Hi Roberto,
As you said
IMG activity Create Hierarchy DataSource (transaction KEB1) in the IMG under Data Transfer into the SAP Business Information Warehouse -> Setting for Application-Specific DataSources (PI) ->Profitability Analysis"
Created Data Source for Hirerachy....
When i checked the Data SOurce in RSA£
Following Error Message is displayed
Error 6 in function module RSS_PROGRAM_GENERATE
Could you asist me on how to proceed and what is vdh1n transaction is used for.
How can i check the hirerachy of 0Customer in R/3
Thanks

Not enough memory for Data Provider-Error while creating Data Source

Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.

Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object.

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

What is the data source for cProjects hierarchy texts 0CPR_GUID?

The cProjects hierarchy will not display texts, only the technical name. I believe I must extract the texts for BW InfoObject 0CPR_GUID. I can not identify the text counterpart to 0DPR_HIERARCHY_ATTR data source for BW InfoObject 0CPR_GUID.
Questions:
1) What is the technical name for the text data source of BW InfoObject 0CPR_GUID?
2) Is this data source included in NetWeaver 04?
Thanks you for your help,
John Hawk
[email protected]
(209) 324-0436

The Answer:
The project element data sources must be mapped to both the project element infosoure AND 0CPR_GUI_TEXT.
For each data source
0DPR_APPROVAL_TEXT to 0CPR_APPROVAL_TEXT and 0CPR_GUID_TEXT
0DPR_CHECKLIST_ITEM_TEXT to 0CPR_CHECKLIST_ITEM_TEXT and 0CPR_GUID_TEXT
0DPR_CHECKLIST_TEXT to     0CPR_CHECKLIST_TEXT and0CPR_GUID_TEXT
0DPR_PART_TEXT to 0CPR_PART_TEXT and 0CPR_GUID_TEXT
0DPR_PHASE_TEXT to 0CPR_PHASE_TEXT and     0CPR_GUID_TEXT
0DPR_PROJECT_TEXT to 0CPR_PROJECT_TEXT     and 0CPR_GUID_TEXT
0DPR_TASK_TEXT to 0CPR_TASK_TEXT and 0CPR_GUID_TEXT

HOW TO CREATE SAP BW DATA SOURCES FOR TDS REPORT?

Hi All,
How to create generic data source for these fields?
I have TDS report these names and field.
Pls anyone guide me..
PAN NUMBER
J_1IPANNO
VENDOR NAME (accont type - k)
LIFNR
POSTING DATE
BUDAT
WITHHOLDING TAX BASE
WT_QSSHH
WITHHOLDING TAX AMOUNT
WT_QBSHH
NAME OF WITHHOLD TAX TYPE
WITHT

Hi ,
Thanks for giving info.
How to add different tables in generic data source?
PAN NUMBER
J_1IPANNO
J_1IMOVEND
VENDOR NAME (accont type - k)
LIFNR
J_1IMOVEND
POSTING DATE
BUDAT
RBKP
WITHHOLDING TAX BASE
WT_QSSHH
WITH_ITEM
WITHHOLDING TAX AMOUNT
WT_QBSHH
WITH_ITEM
NAME OF WITHHOLD TAX TYPE
WITHT
WITH_ITEM

Create Data Source for hierarchy

Similar Messages

Maybe you are looking for