Create data source

Dear Gurus,
Am new to extractors and am looking to create the first one.
Is it possible to create extractors from structures?
As an example, how do I create an extractor using structure MEPO1110 (Fields for Purchase Order Header).
BR,
Tolu

Using Function Module you can create create extractor .. once it's done
Create Generic DS(RSO2) based on this Function Module
Please refer Help docs for clear understanding
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Create Generic DS
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33?quicklink=index&overridelayout=true

Similar Messages

Create data source in BI 7.0?

hi,
while creating data source in BI 7.0 , ( from flat file data)
under extraction tab:
character set settings : default and direct entry is there
if i select direct entry i am getting character set and replacement character.
what scenerio we use direct entry and what scenerio we use default. if i select direct entry what is effect for my output.
please clarify.
regards
ss

System Default or Fixed Entry
If you choose Default Setting for the character set, in Unicode systems a file in UTF-8 format is expected, in non-Unicode systems a file in the format of the system code page is expected.
If you choose Direct Input for the character set, you can select an SAP character set and determine a replacement character, in case errors occur while converting to the system character set.
SAP Character Set ID
The 4-character name of an SAP character set as defined in SAP character set maintenance.
The following explains the naming convention in more detail:
First digit: Code
0 EBCDIC character sets
1 ASCII character sets
2 mixed single byte / double byte character sets
4 double-byte character sets
6 mixed character sets
8 double byte and multibyte character sets
9 reserved for code pages you define
Second digit: Country
1-3 countries that use the Latin alphabet (Western Europe, North and South America, Australia, Africa)
4-6 countries that use non-Latin alphabets and writing systems (Eastern Europe, Asia, Arabic countries in Africa)
7-9 reserved for special languages
Third and fourth digits: Sequential number
Example
0100 IBM 00697/00273 (Latin 1 - Germany/Austria)
0401 SNI BS2000 8859-5 EHCLC (cyrillic - multiple languages)

Not enough memory for Data Provider-Error while creating Data Source

Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.

Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object.

About creating data source(urgent)

Hi,
I am abap developer. i don't know much about crm.
our requirement is :
i need to create one infoset in sap r/3.
we want to use that infoset in crm server to create data source.
we use transaction code : CRMD_MKTDS
We specify these values.
Origin Type
RFC Destination
InfoSet
Description
businee pastner
But we are not getting any infoset from r/3 server.
we are getting only crm infoset.
I check RFC Destination. Its working fine.
It gives me error : InfoSet ztest either does not exist or has not yet been generated
Thanks,
Jack

Hi,
You can get the data using a db link and the proc is as follows..
CREATE DATABASE LINK OTHERDATABASE ...;
CREATE TABLE XXXX
AS
SELECT * FROM TBL@OTHERDATABASE ;
Good Luck,
Siva

Create Data Source Module using OMB

I am not seeing how to create Data Source modules using OMB. I am assuming there is a property of OMBCREATE ORACLE_MODULE that I am overlooking. If anyone can provide assistance, it would be greatly appreciated.
Thanks,
craig

Hi,
Yes, there is a OMBCREATE command for creating Oracle Modules. And as per the Scripting ref Guide ( Page 4-157 owb 9i scripting guide) -
OMBCREATE ORACLE_MODULE 'src_module' SET PROPERTIES (DESCRIPTION, BUSINESS_NAME) VALUES ('this is an Oracle module', 'source module') This will create an Oracle module named "src_module", its description is "this is an Oracle module", and business name is "source module".
HTH
Mahesh

Newbie Question: Creating Data Sources

Our current Hyperion setup consists of the Hyperion 9.3 client that users access via a terminal server. We are trying to get the web version of Hyperion running.
I installed some base components of the Oracle Enterprise Performance Management System (11.1.1.2.0.940). It all starts fine and I can login with admin, but I do not see how to create data sources or load .bqy query files. If I create a new interactive reporting document, it makes me choose a Data Source from the virtual directory in which I do not have one. if I try to import one, or import a .bqy file, I browse to the file, select it, then always get a "File path is wrong." error. I also found how to create Data Sources using the CMC, but I do not see how to reference these. What am I doing wrong?.

HI,
What version of Hyperion planning are you using version 9.3 or epm11.1?
Because they have different ways of creating datasources.
In version 9.3 you can create datsource in the configuration utility.
While in version 11 you need to create planning application first before creating datasource either by classince planning application or epm.
Thanks,
Hanson

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

HOW TO CREATE DATA SOURCE FOR MAXDB

hi,
i am using hibernate in NetWeaver with maxdb.
i have to give datasource name in hibernate.cfg.xml
but i do't know how to create datasource for maxdb.
please help me.
Thanqqqqqqqq
Guru

The following link gives u how to create data source
http://dev.mysql.com/doc/maxdb/en/84/1d733cefd63c38e10000000a114084/content.htm

Create Data Source for hierarchy

Hi all,
Can any one tell me how to create Data Source for hierarchy for the object (for example 0MATL_GROUP)?
Kindly Help,
Thanks
Laura Gómez

Hi Laura
with BI7 this feature is not yet supported. Try with 3x datasource

Creating data source for planning area

Hi Experts,
Can you please help me by providing steps to create data source for planning area.
Thanks in advance for your help.
Regards,
Brahma

Hi Brahma,
Please follow below link....
http://help.sap.com/saphelp_scm50/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Hope this may help
Regards,
Harshil Desai

Error In creating data sources

Hi,
I am creating Data source in RSDS transaction that time I am getting following error
"No fields were supplied"
how to resolve this?
Regards,
Akshay

Hi,
First check whther the fields are there in DataSource for transaction data
DataSource for master data
DataSource for attributes
DataSource for texts
DataSource for hierarchies
If the fields are there in datasource Deactivate AND Activate datasource once again
Regards,
Marasa.

Error while creating data source in bi for uc connect

Hi Experts,
we have using ud connect to pull the data from ms sql server using jdbc,we have maintained all the settings in the j2ee engine and also we performed the smoke test which showed the tables content in the ms sql data base.
and also we have maintained the rfc connection between the j2ee and sap bi,and performed the test connection which excecuted great.
but while creating the data source in sap bi administration work bench(rsa1)>sourcesytem>udconnect>create
we have maintained the following parameters
rfc destination----
we have maintained the rfc destination,which we could see in sm59 for the sap bi client
logical system name----
we have mentioned a generic logical system name(here we are not sure)
type of connector----
jdbc
name of the connector------ sdk_jdbc
sourcesystemname----
it has taken the logical system name description when we enter the logical system name.
once after maintaining the setting.when we performed the check.
it showed us the error
check failed rfc connection:check destination

Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu

Create data source -- table does not exist in data dict.

Hello Experts,
I'd like some suggestion on creating customized data source in SAP R/3.
First, I created a program for extracting data in to a structure layout and then created an InfoSet to link with that program.
Finally, I chose to create a data source for transaction data using "Extraction from Query".
Once I save the datasource, there was a message like "Table SY does not exist in data dictionary."
I checked that program and InfoSet. I did not found any compile error.
I wonder how I could investigate this kind of error.
I tried to create another InfoSet calling other program and then create a datasource. There was no error.
My first assumption was there is something wrong in the program.
Any suggestion on this would be appreciated.
Thank you very much.
-WJ-

Thanks for your suggestion Pravin.
However, I found the problem already. This is because the package assigned to a program and to a structure layout were different. After I reassigned the correct package name to the structure layout (same package name as assigned to the program), my datasource could be created.
This problem has been resolved.
-WJ-

How to create Data source in BI7( r/3 extraction)

Hi,
I have created the data source(z_emp_data) at r/3 side and transported in rsa6.
could any one let me know how to create the data source at Bi 7 end? should i create the same data source(z_emp_data) at BI 7 end? i have created the table at r/3 from which i want to load data.....please give step step details..its very urgent....
Thanks
Manjula

Activate it, Create a transformation to the target infoprovider, Create a DTP to schedule the transformation.
You will also have to create an infopackage to get the data from the source system into the BI system.
There are a lot of "stuff" to do with datasources!

Error while creating data source using Oracle Enterprise Manager 10g

Hi,
I have deployed my web application developed on OC4J 9.0.4 stand alone (Win2K) to an integrated OC4J version(Solaris) using Oracle Enterprise Manager 10g.
However, I get an error when I try to create a data source.
The data source I want to create would have the following parameters (as seen in data-sources.xml on the stand alone version):
 <data-source
 class="com.evermind.sql.DriverManagerDataSource"
 name="TestDS"
 location="jdbc/OracleCoreDS"
 xa-location="jdbc/xa/OracleXADS"
 ejb-location="jdbc/TestDS"
 connection-driver="oracle.jdbc.driver.OracleDriver"
 url="jdbc:oracle:thin:@hostName:1521:test"
 username="user"
 password="password"
 min-connections="5"
 max-connections="20"
 inactivity-timeout="30"
 />
When I entered the above data on the Enterprise Manager Data Sources page, I got the following error:
quote:
Error saving Data Source Properties. - Entity et="system";ei="0",et="application";ei="48",et="data-sources";ei="167":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; already exists in the repository. Resolution: Please check the code base.
unquote:
Could somebody tell me what I'm doing wrong ?
I tried to manually edit the data-sources.xml file but the data source didn't show up on the Enterprise Manager.
I'm using a new OC4J instance (on the Solaris machine) for my applications. Is the data source error related to this?
Any help will be greatly appreciated.
Thanks,
Shyam

Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
 class="com.evermind.sql.DriverManagerDataSource"
 name="OracleDS"
 location="jdbc/OracleCoreDS"
 xa-location="jdbc/xa/OracleXADS"
 ejb-location="jdbc/OracleDS"
 connection-driver="oracle.jdbc.driver.OracleDriver"
 username="scott"
 password="->pwForScott"
 url="jdbc:oracle:thin:@localhost:1521:oracle"
 inactivity-timeout="30"
 />
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam

Create data source

Similar Messages

Maybe you are looking for