Create database error
Hello!
I have a oracle 9i instaled in Debian Linux.
When I try to create a new database (general purpose), with dbca i get the following error:
failure occurred at: skgpwreset1
ORA-27303: additional information: invalid shared ctx
ORA-27146: post/wait initialization failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpsemsper
What could that be?
Thanks in advance..
As Joel P�rez sugested.. check for kernal parameter.. u may to set respective kernal parameter properly..
Ex:
Some of the Kernal parameters are
Your parameters seems exceeding the minimum requirements Which are SEMMNI 100 SEMMNS 256 SEMMNS
parameter should be set to the Sum of the PROCESSES parameter for each Oracle database
(SEMMSL SHMMAX SHMMIN SHMMNI SHMSEG )
--Suresh
Similar Messages
-
Unable to create database error
Hello all-
I've been working on a project in Robohelp7/HTML for about a
week. I come in today and try to open my project and receive the
error "Unable to create database. Check that the directory is not
read-only.". I've done the obvious of checking the folders and
files within and they are not marked read only. When I create a new
project, I receive the same error. I'm stuck at a standstill and
can't figure out why Robohelp has decided to deny me access to my
project or the ability to create new ones. I went so far as to
uninstall and reinstall, to no avail.
Has anyone encountered this? Any help would be greatly
appreciated.
ThanksThere is a topic on Opening RoboHelp Projects on my site. Rh allows you to browse to either an XPJ or HHP file but that is only as good as the last time you generated an output.
When you open with an HHP you get an option to use the XPJ or not, in which case one is created. Either way there should be an XPJ. Not sure how you have lost it.
Backup?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Phase Create Database Error in ECC 6.0 EHP5 Installation on SuSe10/Oracle11
Hi,
I have following error ecnounter During Create Databse Phase. Have applied the latest patch after Oracle Installtion.
/oracle file system has the permissions 755.
Environment : ECC 6.0 EHP5 Installation on SuSe10/Oracle11.
Please advise
sapinst_log:-
INFO 2011-08-27 20:36:38.900
Creating file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.901
Removed file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.908
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:36:38.915
Working directory changed to /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64.
INFO 2011-08-27 20:36:38.927
Creating file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.927
Removed file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.933
Real group ID set to 1001.
INFO 2011-08-27 20:36:39.497
Creating file /install/sapinst_instdir/x.
INFO 2011-08-27 20:36:39.498
Removed file /install/sapinst_instdir/x.
INFO 2011-08-27 20:36:39.510
Authorizations set for /install/sapinst_instdir.
INFO 2011-08-27 20:36:39.510
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:36:39.543
Working directory changed to /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64.
INFO 2011-08-27 20:37:58.173
Creating file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/x.
INFO 2011-08-27 20:37:58.174
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/x.
INFO 2011-08-27 20:38:02.167
Creating file /install/sapinst_instdir/x.
INFO 2011-08-27 20:38:02.168
Removed file /install/sapinst_instdir/x.
INFO 2011-08-27 20:38:02.172
Authorizations set for /install/sapinst_instdir.
INFO 2011-08-27 20:38:02.190
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.192
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.198
Copied file '/Media/IM_LINUX_ORACLE/IM_LINUX_X86_64/dev_sap_kernel' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel'.
INFO 2011-08-27 20:38:02.217
Authorizations set for /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.217
Removed file /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64/dev_sap_kernel.
INFO 2011-08-27 20:38:04.407
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/keydb.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/keydb.3.xml'.
INFO 2011-08-27 20:38:06.213
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/statistic.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/statistic.2.xml'.
INFO 2011-08-27 20:39:33.662
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:33.670
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:33.674
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:33.686
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:34.589
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:34.600
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:39.720
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:39.733
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:41.685
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/inifile.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/inifile.2.xml'.
INFO 2011-08-27 20:39:51.367
Execute step createDatabase of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|std|0|NW_OraDbBuild|ind|ind|ind|ind|5|0
INFO 2011-08-27 20:39:57.971
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:58.1
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:58.26
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:58.71
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:40:00.256
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:40:00.278
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
ERROR 2011-08-27 20:40:08.434
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2011-08-27 20:40:08.437
MUT-03025 Caught ESAPinstException in module call: .
ERROR 2011-08-27 20:40:08.585
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|std|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step: SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.).
INFO 2011-08-27 20:40:09.446
Creating file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/__instana_tmp.xml.ora_sql results log:::
2011-08-27, 19:40:31 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 19:40:31 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 19:40:31 SAPINST ORACLE stop logging
2011-08-27, 20:27:43 SAPINST ORACLE start logging for
SHUTDOWN IMMEDIATE;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:43 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-01507: database not mounted
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:27:50 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:27:50 SAPINST ORACLE start logging for
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:50 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 2338463744 bytes
Fixed Size 2228600 bytes
Variable Size 1174408840 bytes
Database Buffers 1140850688 bytes
Redo Buffers 20975616 bytes
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
2011-08-27, 20:27:52 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:27:52 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:52 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:27:52 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:00 SAPINST ORACLE start logging for
SHUTDOWN IMMEDIATE;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:00 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-01507: database not mounted
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:40:05 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:05 SAPINST ORACLE start logging for
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:05 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 2338463744 bytes
Fixed Size 2228600 bytes
Variable Size 1174408840 bytes
Database Buffers 1140850688 bytes
Redo Buffers 20975616 bytes
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
2011-08-27, 20:40:07 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:08 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:08 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:40:08 SAPINST ORACLE stop logging -
Oracle 10g Help?Create database error
I am unable to run a script createDB having command create database kmaa.I open up SQL*Plus, connect and login without any trouble as well. When I try to create a database I get the following:
SQL> CREATE DATABASE kmaa;
CREATE DATABASE kmaa
Error at line 1:
ORA-01501: CREATE DATABASE failed
ORA-01100:database already mounted
Any idea?Hi Pete,
Oracle Express Edition creates a database automatically when you install it and the product is limited to one database instance per machine. Perhaps you are confusing users/schemas with what you may term a database. An Oracle database instance can be broken down into logical units called users or schemas. If you wish to create a database of books, you should create a user called books and then log on as this user and create your database objects. To make things simpler, Oracle XE comes with a browser interface based on Application Express. You can use this to create schemas, database objects and applications (forms reports etc) to access and manage those objects. Further to this you should RTFM.
Regards
Andre -
I have been tried to create ASO database from either esscmd or maxl, but both failed.<BR><BR>For esscmd: copydb "oldApp" "oldDatabase" "newApp" "newDatabase";<BR>for maxl: create database newApp.newDatabase as oldApp.oldDatabase<BR><BR>Both got same error: Operation not supported for aggregate storage applications.<BR><BR>Any helps would be great.<BR>Thanks,<BR>Yan
This is because you need to do a little bit more then you just did. This is what I used on my local machine (OS X) for my database area51, the script was created by the DBCA. As you can see I point to a pfile before I create the database. In this init.ora file, the db_name has been set (among a lot of other stuff). Therefore I gave you the hint to look into the documentation ;)
connect SYS/&&sysPassword as SYSDBA
set echo on
spool /u01/admin/area51/create/log/CreateDB.log
startup nomount pfile="/u01/admin/area51/create/init.ora";
CREATE DATABASE "area51"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
DATAFILE '/u01/oradata/area51/system01.dbf' SIZE 300M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE '/u01/oradata/area51/sysaux01.dbf' SIZE 120M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE '/u01/oradata/area51/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
UNDO TABLESPACE "UNDOTBS1" DATAFILE '/u01/oradata/area51/undotbs01.dbf' SIZE 200M REUSE AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P15
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 ('/u01/oradata/area51/redo01.log') SIZE 10240K,
GROUP 2 ('/u01/oradata/area51/redo02.log') SIZE 10240K,
GROUP 3 ('/u01/oradata/area51/redo03.log') SIZE 10240K
USER SYS IDENTIFIED BY "&&sysPassword" USER SYSTEM IDENTIFIED BY "&&systemPassword";
spool off -
Create database error during instalation
I install Oracle Server 8.0.5 on Linux (kernel 2.0.34)
I can't create database during Oracle 8.0.5 Instalation.
The error is ORA-03113 end of communication channel.
I get this message after "connect internal" and
"startup nomount" in svrmgrl.
Help!
nullanybody can help ? Tks
-
Error while creating database in classic appln
Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advanceCan you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine. -
Because of the discussion present in the following thread, I did few experiments and would you like to share with you. Hope it is a useful information for you guys.
Re: db_name & memory allocation
OS: Win XP SP2 or Windows 2000 <b>(32-bit)</b>
Oracle Version: Oracle 10gR2
System RAM: 1G
<b>Attempting to create the database CCC by specifying db_name parameter only</b>
C:\oracle\product\10.2.0\db_1\database>copy con initCCC.ora
db_name=CCC
^Z
1 file(s) copied.
<b> Starting the service </b>
C:\oracle\product\10.2.0\db_1\database>oradim -new -sid CCC -startmode m
Instance created.
C:\oracle\product\10.2.0\db_1\database>set oracle_sid=CCC
C:\oracle\product\10.2.0\db_1\database>sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Apr 6 07:50:06 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
SQL>
SQL> startup nomount
ORACLE instance started.
Total System Global Area <b>113246208</b> bytes -- Default SGA size
Fixed Size 1247588 bytes
Variable Size 58721948 bytes
Database Buffers 50331648 bytes
Redo Buffers 2945024 bytes
<b> On seeing dynamic components size, shared pool got
33m, large pool got 0m, java pool got 25m and buffer cache
got 50m. Please check the references for these default
values. </b>
SQL> select component,current_size from v$sga_dynamic_components;
COMPONENT CURRENT_SIZE
shared pool 33554432
large pool 0
java pool 25165824
streams pool 0
DEFAULT buffer cache 50331648
KEEP buffer cache 0
RECYCLE buffer cache 0
DEFAULT 2K buffer cache 0
DEFAULT 4K buffer cache 0
DEFAULT 8K buffer cache 0
DEFAULT 16K buffer cache 0
COMPONENT CURRENT_SIZE
DEFAULT 32K buffer cache 0
ASM Buffer Cache 0
13 rows selected.
<b>Total=109051904 </b>
SQL>
create database
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
<b>Errors in alert log file</b>
ORA-00604: error occurred at recursive SQL level 1
<b>ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","create unique index
i_proxy_...","sql area","kksol : kksnsg")
</b>
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
<b>It was thought that shared_pool memory area is not
sufficient. Then thought to know how oracle will behave on
setting sga_target parameter.</b>
<b>initCCC.ora</b>
db_name=CCC
sga_target=113m
SQL> startup nomount
ORACLE instance started.
Total System Global Area <b>121634816 bytes -- Got around 121m </b>
Fixed Size 1247636 bytes
Variable Size 54527596 bytes
Database Buffers 62914560 bytes
Redo Buffers 2945024 bytes
<b>Now create database statement got success here.
Instance got few extra Mbs of memory and oracle can create
the database.</b>
<b>Then it was thought that, why to give 121Mb even. Let exactly 113246208 bytes be devoted to the instance.</b>
initCCC.ora
db_name=CCC
sga_target=113246208 -- providing exact number of bytes as obtained in default case
SQL> startup nomount
ORACLE instance started.
Total System Global Area 113246208 bytes
Fixed Size 1247588 bytes
Variable Size 54527644 bytes
Database Buffers 54525952 bytes
Redo Buffers 2945024 bytes
SQL>
<b> Now create database statement got success here as
well. Because of sga_target, automatic shared memory
management enabled and instance was taking care of buffer
cache, shared pool, large pool, java pool and
streams_pool. In this case shared pool got 46m (greater
than default case value). Java pool and Large pool got 4
mb each and buffer cache got 54m. </b>
SQL> select component,current_size
2 from v$sga_dynamic_components;
COMPONENT CURRENT_SIZE
shared pool 46137344
large pool 4194304
java pool 4194304
streams pool 0
DEFAULT buffer cache 54525952
KEEP buffer cache 0
RECYCLE buffer cache 0
DEFAULT 2K buffer cache 0
DEFAULT 4K buffer cache 0
DEFAULT 8K buffer cache 0
DEFAULT 16K buffer cache 0
COMPONENT CURRENT_SIZE
DEFAULT 32K buffer cache 0
ASM Buffer Cache 0
13 rows selected.
<b>Total=109051904 </b>
SQL>
By providing 113246208 bytes (as in default case) of
memory to SGA by setting sga_target value, Oracle gave
extra memory to shared_pool and buffer cache than in case
of default, thus helping create database statement to get
pass. Oracle always recommends to use automatic shared
memory management by setting sga_target parameter value.
Hope this experiment provides few clues about automatic
shared memory management feature of Oracle 10g. This case
was conducted on 32-bit Oracle. It is quite possible that
create database statement might get success in 64-bit
Platform as by default Oracle will provide 84 Mb to Shared
pool. But to confirm, it has to be experimented.
References:
Shared pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams196.htm#sthref804
Large Pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams090.htm#sthref377
Java Pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams087.htm#sthref364
Buffer Cache
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams043.htm#sthref185Hi,
Good Work Mohammed !!!
Regards
Taj -
Error on Create Database command for Oracle 9i on Red Hat 9
Error on Create Database command
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16
CREATE DATABASE ora9i
ERROR at line 1:
ORA-01092:ORACLE instance terminated. Disconnection forced.
initora9i.ora file contents :
background_dump_dest=$HOME/ADMIN/BDUMP
core_dump_dest=$HOME/ADMIN/CDUMP
db_name=ora9i
db_files= 80
db_file_multiblock_read_count=8
db_block_buffers=100
shared_pool_size = 3500000
log_checkpoint_interval = 10000
processes=50
parallel_max_servers=5
log_buffer = 32768
max_dump_file_size = 10240
global_name = TRUE
control_files=$HOME/ORADATA/ctrl01.ctl
undo_management=AUTO
user_dump_dest=$HOME/ADMIN/UDUMP
-------------------------------------------------Pleae include REUSE keyword at the end of each file location as shown below...
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M REUSE,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M REUSE
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M REUSE
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16 -
hai i am installing sap netweaver 2004s with a IBM DB2 as database.I got an error in Create database phase.
INFO 2011-11-28 02:22:06
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DB6/CENTRAL/AS/createDatabase.clp' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DB6/CENTRAL/AS/createDatabase.2.clp'.
INFO 2011-11-28 02:22:06
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\createDatabase.clp.
INFO 2011-11-28 02:22:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\createDatabase.clp.
ERROR 2011-11-28 02:22:07
MDB-01016 SQL0294N The container is already in use. SQLSTATE=42730
ERROR 2011-11-28 02:22:07
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_CreateDb|ind|ind|ind|ind|16|0|CreateDatabase was executed with status ERROR
Please help me in solving this problem.....
Thanks in advance......
Dinesh.Hello,
<b>FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR.</b>
This Error occurs because the <b><SID>DATA1,<SID>DATA2,<SID>DATA3,<SID>DATA<X></b> and <b><SID>LOG1,<SID>DATA<x></b> are already containing the .mdf,.ndf and .ldf files.
So rename those directories to someother(Do not delete, just rename, as it might be used to attach the database incase you have detached it) and just create the above directories "<b><SID>DATA1,<SID>DATA2,<SID>DATA3,<SID>DATA<X></b> and <b><SID>LOG1,<SID>DATA<x></b>".
This should solve the problem.
Any questions, do post it back, will try to resolve it.
Many Thanks. -
Error while creating database manually
hi guru's i am getting error while creating database manually
my sql is SQL>create database lily
logfile group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
character set WE8ISO8859P1
national character set utf8
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'
size 50M
autoextend on
next 10M maxsize unlimited
extent management local
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf'
size 10M
autoextend on
next 10M
maxsize unlimited
undo tablespace undo
datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'
size 10M
default temporary tablespace temp
tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf'
size 10M;and i am getting following error
create database lily
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\LILY\CONTROL01.CTL'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
code}
Edited by: CHETAN YADAV on Jul 19, 2011 6:55 PMcreate database lily
logfile group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf' size 150M
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf' 150 M
undo tablespace undo datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf' size 10M
default temporary tablespace temp tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf' size 10M;
remove the SQL> from the a.sql script also change the system datafile size to minimum of 100mb size
ALSO check/change the undotablespace name with your init parameter file it should match as it is in the init parameter file
Edited by: rajeysh on Jul 19, 2011 6:59 PM -
I'm running windows server 2003, with 10g Release 1 (10.1) for Windows, while tring to create my database i get this error:
instance created
DIM-00019: create service error
O/S-Error (OS 1388)A new member could not be added
to the local group because the member has the
wrong account type.
how would i go about fixing this any help would be appreciatedShuresh,
Please read note 271569.1 on metalink. There is a fix for it. -
Error while creating database on 11g
Hi
All,
I have installed oracle database 11g R1 on windows XP. I am trying to create database and getting following error.
ORA-01031 insufficient privileges.
I am on ora_dba group on windows.
please let me know if you have any idea.
Thanks,
VishalWhen all else fails, Read The Fine Manual
http://www.oracle.com/pls/db111/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides -
Error while creating database on 10.2 enterprise eidition
Hi,
When i trying to create database through batch file on oracle version 10.2 enterprise edition, its giving error.
ORA-01092: ORACLE instance terminated. Disconnection forced
Following error message logged in log file:
ORA-00604: error occurred at recursive SQL level 2
ORA-00942: table or view does not exist
Offending statement at line 7032
create unique index apply$_conf_hdlr_columns_unq1
on apply$_conf_hdlr_columns(object_number, column_name)
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 7032
ORA-00604: error occurred at recursive SQL level 2
ORA-00942: table or view does not exist
The same script is working fine on Oracle 10.1 Enterprise edition But its giving error on Oracle 10.2 Enterprise edition while creating database.
Please help.
Thanks in advanceHi,
Content of PFILE:
# Basic Initialization Parameters
cluster_database=false
compatible=10.1.0.2.0
control_files = ("F:/oracle/oradata/DTO/ctrl01.ctl", "F:/oracle/oradata/DTO/ctrl02.ctl")
db_block_size=8192
# db_create_file_dest # only used in OMF mode
# db_create_online_log_dest_n # only used in OMF mode
db_domain=""
db_name=DTO
db_recovery_file_dest=F:/oracle/oradata/DTO/flash_recovery_area
db_recovery_file_dest_size=2G
db_unique_name=DTO_01
# instance_number # RAC parameter
job_queue_processes=10
# log_archive_dest_n # NOARCHIVELOG mode
# log_archive_dest_state_n # NOARCHIVELOG mode
# nls_language # OS dependant
# nls_territory # OS dependant
open_cursors=50
pga_aggregate_target=10M
processes=50
# remote_listener # RAC parameter
remote_login_passwordfile=EXCLUSIVE
# rollback_segments # UNDO_MANAGEMENT mode
# sessions # derived from processes
sga_target=100M
shared_servers=0
star_transformation_enabled=FALSE
undo_management=AUTO
# undo_tablespace # first UNDO tablespace
# Other Parameters
background_dump_dest=F:/oracle/admin/DTO/bdump
core_dump_dest=F:/oracle/admin/DTO/cdump
cursor_sharing=SIMILAR
db_file_multiblock_read_count=64
db_files=400
db_writer_processes=2
instance_name=DTO
log_buffer = 8192
log_checkpoint_interval = 10000
log_checkpoint_timeout = 0
os_authent_prefix=""
service_names=DTO
statistics_level=typical
timed_statistics=true
user_dump_dest=F:/oracle/admin/DTO/udump
utl_file_dir=*
Command in batch script:
CONNECT sys/oracle AS SYSDBA
STARTUP NOMOUNT PFILE=&ADMN_DIR/pfile/init&ORA_INST..ora
CREATE DATABASE &ORA_INST
CONTROLFILE REUSE
LOGFILE
GROUP 1 ('&REDO_DIR_1/redo11.log','&REDO_DIR_2/redo12.log') SIZE 10M REUSE,
GROUP 2 ('&REDO_DIR_1/redo21.log','&REDO_DIR_2/redo22.log') SIZE 10M REUSE,
GROUP 3 ('&REDO_DIR_1/redo31.log','&REDO_DIR_2/redo32.log') SIZE 10M REUSE,
GROUP 4 ('&REDO_DIR_1/redo41.log','&REDO_DIR_2/redo42.log') SIZE 10M REUSE
DATAFILE
'&DATA_DIR/syst01.dbf' SIZE 40M REUSE AUTOEXTEND ON NEXT 40M MAXSIZE 2G
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE
'&DATA_DIR/saux01.dbf' SIZE 40M REUSE AUTOEXTEND ON NEXT 40M MAXSIZE 2G
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '&TEMP_DIR/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 10M
UNDO TABLESPACE undo
DATAFILE '&UNDO_DIR/undo01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G,
'&UNDO_DIR/undo02.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G
CHARACTER SET AL32UTF8
SET TIME_ZONE = 'Europe/Warsaw'; -
Error while creating database instance during PI instalation
Hi Team,
I am in the installation phase of SAP PI with MAXDB as back end.In the
phase "create database instance" i am facing the following issue
"An error occurred while processing option SAP EHP1 for SAP NetWeaver
PI/Mobile/Banking 7.1 > MaxDB > SAP Systems > Process Integration >
Standard System > Standard System( Last error reported by the step:
Error during execution of command identifier 'ACTIVATE'"
Can you help me in resolving this issue at the earliest.Also i have attached
the sapinst_dev log filke in this incident along with the
error screenshot
Thanks,
Satheesh ETarget node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-08 16:31:08.874 [syxxcnode.cpp:425]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/__instana_tmp.1.xml, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/__instana_tmp.xml to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/__instana_tmp.1.xml
INFO 2014-09-08 16:31:08.905 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW711\ADA\INSTALL\STD\AS\__instana_tmp.xml.
TRACE 2014-09-08 16:31:10.796 [cstatisticmanager.cpp:2241]
CStatisticManager::writeInstallationSlanaFile_Intern
TRACE 2014-09-08 16:31:10.811 [syxxcfile.cpp:85]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.1.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-08 16:31:10.811 [syxxcnode.cpp:425]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.1.xml, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.xml to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.1.xml
INFO 2014-09-08 16:31:10.811 [synxcfile.cpp:149]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\NW711\ADA\INSTALL\STD\AS\instslana.xml.
INFO 2014-09-08 16:31:10.811 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW711\ADA\INSTALL\STD\AS\instslana.xml.
TRACE 2014-09-08 16:31:10.889
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2014-09-08 16:31:15.669 [iaxxgenimp.cpp:638]
CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> <p> An error occurred while processing option <i>SAP EHP1 for SAP NetWeaver PI/Mobile/Banking 7.1 > MaxDB > SAP Systems > Process Integration > Standard System > Standard System( Last error reported by the step: Error during execution of command identifier 'ACTIVATE' : <DBMException -24988 ERR_SQL SQL error
-2014,Identifier too long>)</i>. You can now: </p> <ul> <li> Choose <i>Retry</i><br>to repeat the current step. </li> <li> Choose <i>Log Files</i><br>to get more information about the error. </li> <li> Stop the option and continue later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS. </p> </body></html>
TRACE 2014-09-08 16:31:15.669 [iaxxgenimp.cpp:1031]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2014-09-08 16:31:19.434 [sixxcstepexecute.cpp:1002]
An error occurred and the user decided to retry the current step: "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_ADA_DB|ind|ind|ind|ind|nw_ada_db|0|SdbPreInstanceDialogs|ind|ind|ind|ind|preinstance_dialogs|0|SdbInstanceDialogs|ind|ind|ind|ind|instance_dialogs|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|instance_create|0|sdb_instance_activate".
INFO 2014-09-08 16:31:19.450 [synxccuren.cpp:887]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS.
TRACE 2014-09-08 16:31:19.465 [syxxcfile.cpp:85]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.2.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-08 16:31:19.465 [syxxcnode.cpp:425]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.2.xml, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.xml to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.2.xml
TRACE 2014-09-08 16:31:19.497
Instantiating new NWUsageTypeBasic
TRACE 2014-09-08 16:31:19.497
NWUsageTypeBasic() done
TRACE 2014-09-08 16:31:19.497
Call block: SDB_INSTANCE_CREATE_ind_ind_ind_ind
function: SDB_INSTANCE_CREATE_ind_ind_ind_ind_PreStepPhase_sdb_instance_activate_Preprocess
is validator: false
TRACE 2014-09-08 16:31:19.543 [sixxcstepexecute.cpp:839]
Execution of preprocess block of |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_ADA_DB|ind|ind|ind|ind|nw_ada_db|0|SdbPreInstanceDialogs|ind|ind|ind|ind|preinstance_dialogs|0|SdbInstanceDialogs|ind|ind|ind|ind|instance_dialogs|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|instance_create|0|sdb_instance_activate returns TRUE
TRACE 2014-09-08 16:31:19.575
Instantiating new NWUsageTypeBasic
TRACE 2014-09-08 16:31:19.575
NWUsageTypeBasic() done
TRACE 2014-09-08 16:31:19.575
Call block: SDB_INSTANCE_CREATE_ind_ind_ind_ind
function: SDB_INSTANCE_CREATE_ind_ind_ind_ind_PreStepPhase_sdb_instance_activate
is validator: false
TRACE 2014-09-08 16:31:19.621
WorkDir: C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS
TRACE 2014-09-08 16:31:19.621
SdbOperations.callSdbCmdJar() Use java home : C:/Users/EGSAPI~1/AppData/Local/Temp/sapinst_exe.4716.1410173586/jre
TRACE 2014-09-08 16:31:19.637
SDB invoking java call:
C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS\sdb_sl_lib.jar;C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS\sdb_sl_lib_api.jar;C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS\sdb_core.jar" com.sap.sdb.core.main.cmd.SdbCmdMain
TRACE 2014-09-08 16:31:19.637 [synxcchapp.cpp:275]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Going to call CreateProcess/CreateProcessAsUser for 'C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe' now.
TRACE 2014-09-08 16:31:19.637 [synxcchapp.cpp:575]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Trying to start C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe CSySysLibCallsWrapper::syscallwrapper()->__CreateProcess__(NULL, <command line for executable C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
TRACE 2014-09-08 16:31:19.637 [synxcchapp.cpp:653]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 4956. Executable name: C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe
TRACE 2014-09-08 16:31:19.637
Maybe you are looking for
-
External Hard Drive Question...
I am looking to purchase an external hard drive to use with my Macbook and my PS3 in order to store my music and movies and share my media between the two. I am also purchasing a larger internal hard drive for my PS3 and it is the exact same 160GB SA
-
How can I ditch the upgrades and get back to 3.6.x so the addons will work?
I don't like the skin in versions 4 and 6 and Real Player and other addons won't work. How can I get back to 3.6.x to make Firefox work properly again?
-
Late-2009 A1286 external display NOT working
I realize there's a lot of talk on this issue but i can't find an answer applicable to my situation. Pro unibody with a cracked LCD Tried to bypass fixing it by hooking up an external monitor via minidisplay port-- NO luck. Very irritating. Attempts:
-
How do you change the font family in the notes? isHTML is set to true in viewer.xml and vconfig.xml has <uifont name="FONT_NOTES" value="Arial,11,false,false,false"/> but it keeps coming out in Times New Roman. This happens in both Firefox and IE. Al
-
I did a search for this. I know JavaScript has a built in method for timeouts in the form setTimeout() and clearTimeout(). The only thing I found on this for Photoshop is for Applescript. Is there a way to start a timeout in Photoshop using JavaScrip