Create Delivery from a Sales Order adding a new position

Hi experts!
I need to create a delivery from an existing Sales Order (with just 1 position), and add a new position to this Delivery so it creates with two positions, the one from the SO and the added one.
I'm using FM RV_DELIVERY_CREATE. Is it possible to do this?
Thanks!!
Carles

Hi Carles,
I would prefer BAPI_OUTB_DELIVERY_CREATE_SLS. At least the delivery creation will be fine, your second position might be more complicated. But there are exits in the Bapi and you might go for an exit of the delivery creation itself -> then also manual triggered creation of a delivery will be correct.
BR, Christian

Similar Messages

  • How to create delivery from a sales order?

    Hi friends,
    Can you tell me how to crete a delivery from a sales order?
    First, I would like to know which transaction we use to create and how?
    Appreciate your input.
    Thanks,
    Krishen
    P.S. Points assured for helpful answers and thanks in advance for your time.

    VL01 is the transaction for the creation of Delivery
    VL01   SAPMV50A       Create Delivery
    VL01N  SAPMV50A       Create Outbound Dlv. with Order Ref
    VL01NO SAPMV50A       Create Outbound Dlv. w/o Order Ref.
    Message was edited by: Gopi Narendra

  • Wrong VL-367 error while creating delivery from multiple sales orders

    Hi,
    We have a Z program* that runs BAPI_OUTB_DELIVERY_CREATE_SLS with multiple sales order items to create one delivery.
    The program runs as a job. The problem is sometimes Bupi turns "VL367 - an item with no delivery quantity..." error for some of the items. But actually we have no availability problem, after a minute in the next job the delivery is being created for those items.
    We couldnt find the the state that causes this wrong error. Have any ideas, is there any problem with the bapi ?

    Hi,
    You should check if you got other Sales Order that might be have items with quantities confirmed. Quantities confirmed in a sales order will be appear as unrestricted stock, although is reserved, and therefore for example:
    Sales Order A: item 10, quantity 10
    Unrestricted stock: 10
    Sales Order B: item 10 (Same material as Sales Order A), quantity 2
    Creating outbound delivery for Sales Order B will generate the message, because that stock is being taken for the Sales Order A already.
    Hope it helps.

  • Error while creating a delivery from a sales order

    Hi Folks,
    when i try to create delivery of a sales order, i am getting following error:
    " Item 000030: delivery split due to conflicting header data (FKARV: ZF2C <-> F8) "
    please help me in correcting this error.
    thanks in advance.

    Hi,
    The field FKARV is for Proposed billing type for a delivery-related billing doc.
    Now here in your case billing document if ZF2C and another is F8 so it is splitting, check this
    Kapil

  • How to restrict more than one delivery from one sales order.

    Hi Guys,
    We have a requirement that is, system should not allow more than one delivery from one sales order no even if when there is some line item still to be delivered.
    We want only one delivery for one sales order and rest of line items should be treated as rejected.
    Kindly help
    Thanks in advance,
    Balu

    Hi MP,
    Its also not working as we have the requirement is that once sales order is saved and one delivery is created then again if we are adding some more item inthe same sales order then system should not allow to create delivery document as one delivery already created.
    Thanks,
    Balu.
    Edited by: Balu Sajja on Aug 30, 2010 1:29 PM

  • Single delivery from multiple Sales Orders

    Can you let me know how to create a Single DN if there are different parts to be shipped if the below satisfies,
    same ship-to-party
    same ship date
    thx,

    Hi Pri,
    To have single delivery from multiple Sales Orders you have 2 waysto do it.
    The prerequisites are,
    A. All sales orders should have same ship to Party
    B. Delivery due dates should be same.
    C. Incoterms should also be same.
    D. Shipping Point should be same.
    Once this is ensured, you can either
    1. Go to Tr. Code VL10A and execute the delivery document creation for the list of sales orders
    Or,
    2. Go to VL01N. Give 1st order no. enter into the overview screen
    Here, go to main menu, Outbound Delivery ---> Collective Processing- Del. Creation
    This will also take u to the same VL10A screen.
    Hope, this is helpful. Award points if found helpful.
    Regards,
    Niketan

  • Auto-create delivery for multiple sales orders

    I would like to ask how to create auto-create 'single' delivery
    for multiple sales order during release sales order in R11i.
    It is found in my example during release sales order, multiple
    sales orders fulfill release sales order criteria, a single pick
    slip is generated but it is found that each sales order have
    individual delivery with it. It will casue multiple pack slips
    for a singles pick slip. Is it normal feature for auto-create
    delivery, or any setup to solve it?
    Thanks in advance.

    Am not able to do Single Delivery for Muktiple sales orders
    Have you searched the forum for this question as to why you were not able to generate ??  It could be due to multiple reasons.  Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
    thanks
    G. Lakshmipathi

  • Hii  purchase infor record when creating PR from a sales order

    Hii
    I have found an exit USEREXIT_MOVE_FIELD_TO_ME_REQ when creating a sales order i can modify the table EBAN
    there is a special flow where i need to remove clear out the Purchase info record (INFNR) since when creating a sales order the purchase determine his own vendor thus i have an error message which is trggered since the vendor of purchase infor record is different from the sales order vendor.
    can you please advise what is the impact of deleting the INFNR data during the creating of sales order.  Seems to me that the purchase requisition is not created automatically in this case?

    Hi,
    IN ECC 6.0 EHP 4, it gets copied from PR to PO but not in lower versions.
    Hence you can achieve the same using some PO BADI's or through enhancement spots.
    Thanks & Regards,

  • How to transfer cost from old sales order (cancelled) to new sales order

    Hi Gurus
    I want to know, how to move cost from one sales order to another sales order.
    SD created sales order before 1 month and there was production order behind this. Production was completed and all the cost was moved to sales order and also SD has raised invoice on customer. This transaction was completed.
    The above order was rejected by customer due to some changes in the order. SD raised another sales order and production order was created to to additional work. Production transfered above stock (produce before on old production order) to new production order.
    My problem is stock is now transfered to new production order but cost is still sitting on old sales order. How do I transfer cost from old sales order to new sales order. SD cancelled old invoice and raised new one with full value (old + new work) on new sales order. Now cost is on old sales order and revenue is on new sales order.
    Please help.
    Thanks

    Hi
    I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
    The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
    Many thanks

  • Create delivery automatically when sales order is created but not invoice??

    Hi,
    I have a requirement where in, it should create delivery (also issue) automatically when i create sales order, but it should not create the invoice automatically. I am going to do the invoice manually from the delivery document. Can you suggest me how to do this??
    Thanks
    Ghanesh

    Hi,
      If the sales document type is not relavant for Cash sale and the document type is used globally in the business then if for some specific conditions like distribution channel or plant or for division if u want to carry out the immediate delivery creation and PGI, use the below user exits and Bapi's
    The below user exit is used to export the sales order details to capture the required checking cond such as sal org,dist ch,div,plant,etc
    Include MV45AFZZ
    FORM USEREXIT_SAVE_DOCUMENT.
    Include MV45AFZA
    FORM -USEREXIT_REFRESH_DOCUMENT.
    BAPI_ISAORDER_GETDETAILEDLIST
    BAPI_OUTB_DELIVERY_CREATE_SLS
    SD_DELIVERY_UPDATE_PICKING
    BAPI_OUB_DELIVERY_CONFIRM_DEC
    Regards,
    Gopal.

  • Inbound Delivery from repair sales order is wanting to do a delivery split

    I have a strange issue.  I created a sales order for repair using notification, sales order.  When trying to do a receipt it is giving me an error that says delviery split due to different shipping points.  There is only one line item on this order...This part is not set up at all in our other plant just the one it is coming into.  The dlivery plant is set to the same plant.....customer master does not read two different addresses....other material seems to work fine...it is just on this one material....can anyone advise what is happening?

    Hi Kimberly,
    In these type of scenario, generally company maintain the two plants.
    One for delivery and second for receipt the goods from customer (Which are coming for servicing or maintenance).
    I think you are directly go to VL01n and enter the shipping point, date and order, when you enter then system shows you this error.
    Do one thing,
    Go to VA02 --> Enter your order number --> Enter --> On overview screen --> Click at "Sales document" (Menu) --> Click at "deliver"
    it will directly take you the delivery overview screen.
    Please try and revert back with your findings.
    Regards,
    MT

  • How to create delivery for return sales order?

    Hello
    I'd like to create a delivery for a return sales order, I used transaction VL01N to do that, but error message said no delivery-relevant item in this order. Can transaction VL01N be used for this step?
    Nicole

    Hi,
    We can create the delivery in Return process with the transaction code VL01N as in the normal process. The following are some imp points we need to remember before performing returns order process.
    1. We must make sure that a RE document type must be created and assigned .
    2. Subsequent delivery document LR must be created and assigned to order type RE.
    3. We must make sure whether the item for which we are creating a return delivery is it relevant for return process.Means that in the control data of item category  REN 'Return item' indicator need to be activated.
    Once all these settings are fulfilled then only we can perform the return delivery successfully.
    If you are using any other documents rather than standard documents please check for those configuration settings that are applicable for return process.
    Regards,
    Revan

  • How to  create PR automatically by sales order?

    Dear experts,
    I want to create PR automatically with sales order, and then create delivery from this sales order, and goods issue. I know third party order, however it can't create delivery.
    thanks
    Lance

    Hi,
    Go to VOV7 T code,
    You will find one check box Create PO automatic. Check that.
    It will create automatically PO.
    Hope this will help.
    Reward Point if helpful.
    Thanks,
    Raja

  • How to create planned order from the sales order for a processing item

    In the MTO sceanrio, assembly order is created directly from the sales order. I would like to create a planned order from the sales order.
    I tried the Planning strategy group 81 in the material master but it didnt work.
    Could you please let me know how to do it? Is it Schedule line config that controls whether planned order is created?
    Thanks
    Harish

    Narayana,
    Planning strategy 82 is the best & standard way of getting production order created on sale order create.
    just assign this strategy  in MRP 3 view under strategy group.
    If not then using sale order reqt type ( KMFA- Assembly with production order) & assigning this to your sale order item category is also another way to create prodcution order without using planning strategy in material master.
    Follow steps in SPRO-->Sales & dist --> basic functions >avail check &transfer of requirements> transfer reqts-->determination of reqt type using transaction
    Here you may select the item category you in sale orders & assign KMFA to your item category. this will then give option in sale order create to change reqt type to KFMA for assebly orders.
    If you need KFMA to be default assign it to Item cat/ MRP type ( PD) combo.
    Regards
    Ritesh

  • Delivery date and sales order creation date

    Dear all
    Can you please explain the relation between delivery date and sales order date. In my case i can create delivery with delivery date as before the sales order date... how it is possible that i can create delivery before the sales order date.??
    Please explain.........
    Warm Regards
    Inder Pal

    Hi,
    Sales order date: Date on which the customer officially places an order to your company.
    All the commitment and product allocation counting starts with reference to this date.
    e.g. customer says that the goods are required from 20 days of placing order, then from this date the calculation starts.
    Delivery date: Date on which after the system goes through material availability date, replenishment time, calculates the date on which physically the goods can be delivered to the customer.
    e.g. customer orders 100 qty of material X in 15 days, you will hve to check this delivery date through availability check which can be done in sales order and also delivery.
    payment date is based on this delivery date.
    regards,
    Siddharth.

Maybe you are looking for