Create DIR from routing..

Hello All,
I have a requirement to generate a document in SAP DMS (CV01N) for the assembly instruction using the process steps from routing(CA01).This would include inserting an assembly picture (JPEG) into original file which would reside in DMS and would link back to routing using the object link. The request for this process was to avoid the manual creation of the worksheet from routing. The series of steps in routing would be pulled into a excel document inside a DIR at click of a button from the routing screen. Updating the routing from the DIR screen should be blocked wit an error message.
Please let me know if you guys have come across such requirements and what could be the possible solutions.
Thanks in advance,
P-

Hi chandu,
Its working for rest of object links but for sales order its not showing create button. Is this screen shot taken from VA01/02 transaction? I guess you have share the screenshot from material master .
There is no create document button after making below setting..
Create Document field, I have tried with value 1 as well as 2.
/Tilak

Similar Messages

Not able to create DIR from PR line Item

Dear Friends,
I have Cretaed Doc Type "CON" and entered "EBAN - Purchase Req. Item" in the object link and in Create Document I have mentioned " 1 - Create simple document".
When I try to create a DIR from PR Line Item, there is no option or a logo in the Popup where I can click and create DIR from The Object PR Line Item.
I get the create Document icon in WBS element for same document type.
Can anybody guide me the if I have missed any config.
With Warm Regards
Mangesh Pande
Edited by: MANGESH PANDE on May 23, 2011 11:33 AM

Screen calling is controlled by MM module -
check
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=68747578
I dont think its possible to create document from PR

Unable to create DIR from the objects

Hi,
I want to create the DIR from the object transaction, eg., Purchase Order, I have set "1" - Create Simple Document under Define Object Links for that particular Document type, But despite this config, I am not getting the "create" button. whereas I have assigned the same document type to another Object link Appropriation Request, and I am able to create DIR from the object transaction itself. Upon, exploring the system, I found that the Purchase order uses the Program "SAPLCVOB" screen"0200" whereas Appropriation request has Program "SAPLCV140" screen"0204" So, I presume that the configuration affects only SAPLCV140 and it has no affect to SAPLCVOB. Or is there any other way to create the DIR directly from the objects which uses SAPLCVOB program? My user wants to create DIR directly from PO.

Dear Mohamed,
To grant that allways the currenct screens and authorizations were
called please maintain also the value "1" into the "Authorization"
column. For further informations on this maintainance please see the
SAP note 1066915. It's important that you not enter the mentioned
screen number wihtout the leading "1" as this number is added
automatically by the system (e.g. object MARA 1201 maintain like MARA
201). You can do this in customizing under:
Transaction SPRO
> Cross-Application-Component
    > Document Management
         > Control Data
             > Define screen for object links
If you need the dynpro number or object you will find all standard SAP
objects and their screen number in function module CV130 (Screens) by
transaction SE80. Please maintain all necessary SAP objects.
Best regards,
Christoph

Option of creating a DIR from Asset master not available

hi
I have one document type for which object link is Asset master ( ANLA, Screen no: 225).
In customizing for create document, option selected is Use transaction to create document.
Now When I go to Asset master -> extra -> Document data , there I get option of only attaching the document, not creating the document directly from Asset master.
Any help on this?
Thanks and Regards,
Niraj Sikligar

Hi Niraj
As per my understanding you must have used Option 2 in Customizing of Object ANLA in DC10 in Create Document Field.
There are Three Options for Input 0,1,3
1. If you select 0 for Document Type DWG , Then when you press Button Create Document You get list of Document Types to which Eg. Object MARA is linked. In This example we Say DRW, DRM,DCG.
In this list you will not see DWG.
2. If you select Option 1 for DWG, Then you will find DWG in the list if you press Button Create Document .
3. If You Select Option 2 for DWG, Then you will find DWG in the list if you press Button Create Document and when you select DWG, it will take you to Transaction CV01N.
These Options allow you to create DIR from an Object with three different Option.Choose any method which suites your clients requirement.
For all three Options you can link Any Document type in Table Linked Document manually.
Hope this tip is usefull to you.
With Regards
Mangesh Pande

DIR no. not showing after creation of DIR from Easy DMS

Dear Friends,
I could able to create DIR from Easy DMS. But I could not able to see DIR no. after creation, so that I do not document created or not ? If created what is the no. I need to open thru search or other way.
Is it standard functionality.
Can we change this by any functioanl module or any BADI implementation?
Regards,
Sai Krishna

Hi Sai
When you creating a DIR through Easy DMS it will ask you document type and description. In the same window as prasad mentioned 4th tab "Techinal Details" you can find the document number,document type, document part and document version. After creating the document it will create in the folder with all the remaining details with default layout.
e.g: Document Description | Status Description | Document Number | Type | Version | Part | User | Change Number ... other details.
Test | Create Document | 10000000304 | DOC | 00 | 000 |...etc
Please check the DIR while creating. Surely it will be available.
Thanks
Prasad

DIR creation from routing

Hello All,
I have a requirement to generate a document in SAP DMS (CV01N) for the assembly instruction using the process steps from routing(CA01).This would include inserting an assembly picture (JPEG) into original file which would reside in DMS and would link back to routing using the object link. The request for this process was to avoid the manual creation of the worksheet from routing. The series of steps in routing would be pulled into a excel document inside a DIR at click of a button from the routing screen. Updating the routing from the DIR screen should be blocked wit an error message.
Please let me know if you guys have come across such requirements and what could be the possible solutions.
Thanks in advance,
P-

Hi Paddy,
For this requirement a z-develipment needs to be done with help of respective screen exits. You need to consult with Abap'r. In standard environment it's not feasible.
Hope this will help.
Regards,
Ravindra

Using D-LINK dir-825 router and unable to print on hp laserjet 4000tn

i am using a d-link dir-825 router for my network but recently i have bought a used hp laserjet 4000TN printer for my small network. i can ping it from any where but i am not be able to print off it.
thank
ASe

plz try to download the following set of drivers from the link below :::\
http://gimp-print.sourceforge.net/MacOSX.php3
This is a new set of default drivers and mayhelp u in resolving the issue.
Plz do run disk first aid after installing the driver....might suggest even before installaing.
Thanx !! for trying.

PC cannot see wireless Airport Express using Ethernet on D-LINK DIR-655 Router

This seems to be a recurring issue going way back, but I have yet to see a real solution posted.
I am using my Airport Express (APX) to stream music from the computers on my network to my stereo via Airplay. I have APX set up to wirelessly join my existing wireless network, which uses a D-Link DIR-655 router hooked to a Time Warner cable modem. I can succesfully connect all of my wireless devices via Airplay, through iTunes to my APX, including two laptops and an iPhone. However, my primary desktop PC, which does not have a wireless card is linked directly via ethernet cable to my D-Link router, and it is not able to see my APX. I can, however, see the Airport Express from my PC through my Airport Utility by directly typing in the IP address. Note that the APX set-up option to allow Ethernet clients is checked. I also noticed that my laptops will stop detecting the APX if I directly connect them to my D-Link router via Ethernet and turn off their wireless cards. They will resume detecting APX when I turn their wireless connections back on. So, bottom line, I am convinced that this is not a firewall problem. Although I have tried every conceivable setting of my D-Link router and APX, I am convinced it is either a wireless to ethernet communication issue, or some obscure setting on APX.. Any help would be appreciated.
Thanks,
Wayne

I think I found the fix based on reading some Apple TV forums where several people were having the same problem. Under Advanced Network settings in the D-Link setup, I just checked "Enable Multicast Streams" and that seemed to do the trick.

Computer tend to freeze when accessing internet with D-Link dir-655 router

I recently bought a D-Link dir-655 router and since then my computer tend to freeze up completely when accessing internet. This also happens when certain programs access internet. Otherwise I am usually using Internet Explorer or Opera.
I've found that there are many who experience problems with D-Link router, that they may have problems with certain network card. Anyone who can say if this is a known issues and if it there is a solution or if it is better to buy another router?
Model #: HPE-140sc
Product #: WC779AA-UUW
Software-version#: A1PNv6PrA2
PCBRAND: Pavilion

Hi, Ernst:
Would you consider backing up your files and doing a system recovery?
Maybe the OS has some corrupt registry files or something.
If you recover and then it still does that, your only choice looking at the motherboard is a PCIe gigabit ethernet adapter which would be relatively easy to install, or you could even get a USB ethernet adapter and not even have to open the case.
See if there is a setting to disable the onboard NIC if you have to add a network card.
I would rule out all software problems before buying hardware.
If you want to try some other malware program, I recommend the free Kapersky rescue disk. You burn the file to a CD and boot from it. It scans the drive and deletes any malware or virus files it finds without the PC being in windows. A lot of times viruses and malware can't be removed when windows is running.
Link to the download and instuctions for use is below. I like to use the graphic interface rather than the text interface.
http://support.kaspersky.com/faq/?qid=208282173
Paul

Wireless connection to D-Link DIR-655 router

I just got a MBP and I can't connect wirelessly to my D-link router (WPA password protected; wired connection works great). Aiport sees the router, asks for the password which I enter, and then I get the message "the selected network uses and Access Control List.. and this computer is not on the list." I've tried to add the MBP to my network using the Network Magic process for adding new devices (which worked just fine to wirelessly connect my PC laptop from work), but it can't seem to find the MBP. I tried the steps suggested by iVmichael to someone having a similar problem April 5-6, and also tried disabling my network lock, but so far haven't found the magic combination. Suggestions?
MacBook Pro Mac OS X (10.4.8) D-Link DIR-655 router
MacBook Pro Mac OS X (10.4.8)

I had a similar problem and I needed a second computer (B) using a wired connection to the router to allow the other one (A) in. This is what I did:
1. Using the wired computer (B) I opened up the network so any computer could join the network wirelessly.
2. I joined the network with (A) wirelessly.
3. Once I had successfully joined the network with (A) I used the wired computer (B) to do a search for new computers so (A) could be registered in the Access Control List.
4. Using (B) I closed the network again.
5. Now I could join the network with (A) wirelessly without any trouble.

Choose File Form Data Create Spreasheet From Data Files

I am following the tutorial for LC 8 and when I get to the topic titled "Collecting the data in a spreadsheet" it says to "Choose File > Form Data > Create Spreadsheet From Data Files".
However, when I try to follow that path I do not see a "Form Data > Create Spreadsheet From Data Files" menu option.
What am I not doing properly? How do I accomplish this task?
Thanks!

Thank you so much Paul. I have been trying all day to locate the method by which I could create a spreadsheet using the pdf submit route. I suppose the tutorial in CS4 should have been changed to reflect the changed explanations, but I guess that would be difficult to do. Anyway it worked and I can now do the analysis I need from my customers (lots of pupils!).
Best wishes,
Kevin Palmer

Can't create JVM from JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);

I'm new in using JNI. When i compile the C program that invoke the JAVA program, everthing goes fine. I can obtain the the "exe" from the compilation.
But when i run the "exe" file it display "can't create Java VM". Here is the part of the code in C program:
........//other code
JNI_VERSION_1_2
JavaVMInitArgs vm_args;
JavaVMOption options[1];
options[0].optionString =
"-Djava.class.path=" USER_CLASSPATH;
vm_args.version = 0x00010002;
vm_args.options = options;
vm_args.nOptions = 1;
vm_args.ignoreUnrecognized = JNI_TRUE;
/* Create the Java VM */
res = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if (res < 0) {
fprintf(stderr, "Can't create Java VM\n");
exit(1);
.......//other code
I'm using JDK1.3, and windows ME.
Can anyone tell me the problem?

I think you need to get the address of the create function from the jvm.dll at runtime and call that: this works for me:
     HINSTANCE handle;
     JavaVMOption options[5];
     char JREHome[MAX_PATH];
     char JVMPath[MAX_PATH];
     char classpathOption[MAX_PATH];
     char librarypathOption[MAX_PATH];
     if(!GetPublicJREHome(JREHome, MAX_PATH))
          LogError("Could not locate JRE");
          abort();
     strcpy(JVMPath,JREHome);
     strcat(JVMPath,"\\bin\\client\\jvm.dll");
    if ((handle=LoadLibrary(JVMPath))==0)
          LogError("Error loading: %s", JVMPath);
          abort();
    CreateJavaVM_t pfnCreateJavaVM=(CreateJavaVM_t)GetProcAddress(handle,"JNI_CreateJavaVM");
    if (pfnCreateJavaVM==0)
          LogError("Error: can't find JNI interfaces in: %s",JVMPath);
          abort();
     strcpy(classpathOption,"-Djava.class.path=");
     strcat(classpathOption,dir);
     strcat(classpathOption,";");
     strcat(classpathOption,JREHome);
     strcat(classpathOption,"\\lib");
     strcat(classpathOption,";");
     strcat(classpathOption,JREHome);
     strcat(classpathOption,"\\lib\\comm.jar");
     strcpy(librarypathOption,"-Djava.library.path=");
     strcat(librarypathOption,JREHome);
     strcat(librarypathOption,"\\lib");
     OutputDebugString("classpath option=");
     OutputDebugString(classpathOption);
     OutputDebugString("\n");
     OutputDebugString("librarypath option=");
     OutputDebugString(librarypathOption);
     OutputDebugString("\n");
     options[0].optionString=classpathOption;
     options[1].optionString=librarypathOption;
     options[2].optionString="vfprintf";
     options[2].extraInfo=_vfprintf_;
     options[3].optionString="exit";
     options[3].extraInfo=_exit_;
     options[4].optionString="abort";
     options[4].extraInfo=_abort_;
    vmArgs.version = JNI_VERSION_1_2;
    vmArgs.nOptions = 5;
    vmArgs.options = options;
    vmArgs.ignoreUnrecognized = false;
    if(pfnCreateJavaVM(&jvm,(void**)&env, &vmArgs)!=0)
          LogError("Could not create VM");
          abort();
     }

Connecting iPad to dlink DIR-600 router

I wish to connect my iPad to a DIR-600 router so I can print wirelessly. The printer and router have successfully connected but I have no idea what settings to put into the iPad to get it to connect. There is no internet involved due to location (building site). I also realise that the router in use is perhaps 'outdated', should I just be looking at upgrading that to solve my issue? Any help greatly appreciated!

Lack of internet is irrelevant to printing. If your Printer is Air Print enabled, the iPad should pick it up when connected to the wireless network provided by the router.
Look for your Printer here: http://support.apple.com/kb/ht4356
If it appears in the list, then simply go into Settings on your iPad, and tap on Wi-Fi. Search for the Dlink Wifi network and connect to it. If your Printer is configured on that same network and is airprint compatible, your iPad should pick it up to Print from any App with the ability ot Print.

CA02: Delete Operation from Routing

Hello,
My question is: how can i delete an operation from routing, like in CA02, but using FM or BAPI and avoiding Batch Input?
Right now it's done with Batch input, but when there is more than one routing per material it crashes, due to extra screens.
Thanks in advance...

Dear,
if you have created operation through CA01 then
Go to CA02-- Select your operation and then header manu Edit--Delete or use (Shift+F2) and save it.
If in CO01 production order then in operation details screen and select your operation and delete it.
Please try and come back.
Regards,
R.Brahmankar

Unable to create PDF from Publisher file

I am able to create .pdf from a .jpg, also from an .xls ... but not from a Publisher document (2007).
I get a prompt to run in repair mode and I tried that (twice) but the problem is not being corrected. At one point I had a message about PDFMOUTLOOK and thought I disabled it. I tried both ways, from inside Publisher, and dire Any help will be greatly appreciated.ctly from Adobe Acrobat 9 Pro ... neither works.
Below is the log:
%%[ ProductName: Distiller ]%%
%%[ Error: typecheck; OffendingCommand: xshow ]%%
Stack:
-169
-mark-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
LinK

Interestingly, "PDFMOUTLOOK" is apparenly related to PDF Maker for Outlook. It has also been suggested to be Malware (not good). That would suggest you may have some corruption. I am not saying you do, but just what is hinted at by a web search.
In terms of the printing process. The Adobe PDF printer creates a PS file. With Acrotray active, this PS file causes Acrotray to activate Distiller in the background and complete the conversion of the PS file to PDF. That is the basic conversion process used by Acrobat to create PDF files. Distiller is always in the picture, it just may be running in the background. If Acrotray is not active, the process will stall. Since you are seeing a Distiller log screen, your process seems to be working.
PDF Maker is basically a preprocessor for the Adobe PDF printer. The preprocessor inserts PDF Marks into the PS file that is created to allow the conversion to PDF to include bookmarks, links, etc. My suggestion about PDF Maker (since the print process seems to work) is that there may be something in PDF Maker that is causing the problem. From the web search, it appears it may even be a virus type of aspect that hit your PDF Maker. Again, I am not saying that is the case, only suggesting it as a possibility. If you can create the PDF from the printer, then the basic process of creating PDFs is working and it is then a process of checking out the problems with PDF Maker. For that, I typically suggest turning all of the options off and then adding them back in to see what triggers the problem. You are basically in a trouble shooting mode and need to isolate the problem.

Create DIR from routing..

Similar Messages

Maybe you are looking for