Create dummy component array

how do i create a dummy array
in my object obj1 i have a attribute which is of type obj2 array. obj2 is an object with 1 string and 1 time attribute.
i want to create a obj1 object and populate it with data which will include a populate obj2 array
-Thanks

Sounds like you want to create a group. A group can have a time and string. A group is an array by definition.
Option 1 Right mouse click the BPM object and click "Group". Right mouse click it again and create the string and time attributes.
Option 2 Optionally, you could create another BPM Object that has the two attributes (the time and string arrays). If you go this route you could add this BPM object as an attribute of another BPM object's group. Assuming your attribute's name is "myNewAttribute" and the object your created with the time and string is in the "Model.MyNewObject" BPM Object, you'd of course want to this to the constructor of the group's constructor:
myNewAttribute = Model.MyNewObject()Dan

Similar Messages

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

How to create an new array from dynamically discovered type

    public static Object toAdjustedArray(Object source, Object addition,
                                         int colindex, int adjust) {
        int newsize = 0;
        Class componentType = null;
        if (source.getClass().isArray()) {
            Object[] arrayIn= (Object[])source;
            componentType = arrayIn[0].getClass();
            newsize = arrayIn.length + adjust;
        else {
            System.out.println("error in ArrayUtil");
        Object[] newarray = new Object[newsize];
        copyAdjustArray(source, newarray, addition, colindex, adjust);
        return newarray;
    }This methods take an array as an input an append new value(s) to it.
I can get the component type of the array (i.e. the class of the array's member). But how can I create a new array of this component type (i.e doing something like componentType[] newarray = new componentType[newsize])?
CU Jerome

I fanally found a walkaround trick for my problem.
Their is no way to create an array of a certain type (dynamically dsicovered) in CLDC. But what you can do is to use the instanceof method to determine the type of your array and in a big if statement create the right array.
Here is the final code:
    public static Object toAdjustedArray(Object source, Object addition,
                                         int colindex, int adjust) {
        int newsize = 0;
        if (source.getClass().isArray()){
            Object[] arrayIn= (Object[])source;
            newsize = arrayIn.length + adjust;
        Object arrayElement = null;
        if (addition.getClass().isArray()){
            Object[] temp = (Object[])addition;
            arrayElement = temp[0];
        else{
            arrayElement = addition;
        Object newarray = null;
        if (arrayElement == null){
            newarray = new Object[newsize];
        if (arrayElement instanceof org.hsqldb.Index){
            newarray = new org.hsqldb.Index[newsize];
        else {
            newarray = new Object[newsize];
        copyAdjustArray(source, newarray, addition, colindex, adjust);
        return newarray;
    }

How to create dummy variable in Webi report in BO 4.0 with Bex query.

Dear All,
We have a requirement where we need to overlap multiple tables and based on user selection any one of the table should display in report.
We are on BO 4.0 and source is BW Bex report, we dont have any Universe.
To achieve this we plan to have dummy variable with some fix value and use it as report filter & based on selected value in filter the related table should be display.
We have not found any way to have dummy variable directly in Webi.
Is their any way we can create dummy variable directly in Webi?
Thanks v much in advance,
Regards,

lets say u want to display following picture:
sept$-----august$
City
-chicago123$--
44$
so in Query designer go to Default values section.
Bring in Calendar month
right click calendar month
and hit Restrict
now select variable
use standard sap variable Current Month.
hit okey
now select Variable and hit Red button
Result u restricted current month.
in columns bring in keyfigure $
right click and hit edit
bring in time field calendar month
right click and hit restrict
bring in Current month
right click and select - SET OFFSET FOR VARIABLE
select -1
hit okey
repeat the above process
and this time select offset = -2
this way u restricted current month
but displayed last 2 months for keyfigure values.

Error while creating UI component.

Hi all,
In Mobile perspective I am able to create service component but when I create Mobile ui component I am getting the below error.
Software Component does not support selected Development Component Type. Required DCs are located in an SC that is not visible from the selected SC .
Please help me in resolving this.
Thanks and regards,
Rajesh.A

Hi Rajesh
Please follow this thread
Re: mobile plugins for NWDS 7.1
Go to development infrastructure perspective and check if required dc's are there in XOCA.
If all the plugins are there and if you stll face the problem try this..
In the plugins folder go to com.sap.tc.mobile.wdlite.ide folder
Open the plugin.xml file inside it with a notepad or text editor.
Some where near the end of file you can see something like this:
<DCDependency at-build-time="true" id=tc/mobilecfs/core/wrapper name="tc/mobile/cfs.core.wrapper".........>
Just delete this line. It wont cause any side effects.
Now restart NWDS and everything will be fine.
Regards
Vidyadhar
Edited by: Vidyadhar N on May 4, 2009 6:30 AM

What are right parameter types of ODCIIndexInsert in case of creating indextype WITH ARRAY DML option (documentation mismatch)

Hello.
During developing Domain Index for Oracle 11.2.0.1.0 (problem also appears in 12с) i was faced with misunderstanding of parameter types of function
ODCIIndexInsert in case of creating indextype WITH ARRAY DML option
According to Oracle documentation
http://docs.oracle.com/cd/E11882_01/appdev.112/e10765/ext_idx_ref.htm#i76892
In case of WITH ARRAY DML option Oracle will invoke ODCIIndexInsert with following signature
FUNCTION ODCIIndexInsert(
ia ODCIIndexInfo,
ridlist ODCIRidList,
newvallist varray_of_column_type,
env ODCIEnv)
RETURN NUMBER
In my case indexed column has datatype NUMBER so i defined varray_of_column_type as SYS.ODCINumberList
STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in sys.ODCINumberList, env in SYS.ODCIEnv) RETURN NUMBER
Indextype was created as
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML(number, sys.ODCINumberList)
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
or
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
(problem occurs in all cases)
CREATE TABLE test_table (id NUMBER (19,0));
CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type;
When attempting to insert data in the table
insert into test_table values (1);
oracle raise exception
Error starting at line 53 in command:
insert into test_table values (1)
Error at Command Line:53 Column:1
Error report:
SQL Error: ORA-29925: cannot execute SCOTT.INDEX_METHODS.ODCIINDEXINSERT
ORA-06553: PLS-306: wrong number or types of arguments in call to 'ODCIINDEXINSERT'
ORA-06553: PLS-306: wrong number or types of arguments in call to 'ODCIINDEXINSERT'
29925. 00000 - "cannot execute %s"
*Cause:    The specified function does not exist or does not have an
           appropriate signature.
*Action:   Implement the function with the appropriate signature.
So my question is.
Is it normal behavior of oracle (according to documentation)?
What is correct signature of ODCIIndexInsert function in case of INDEXTYPE creation with 'WITH ARRAY DML' option and fact that indexed column has NUMBER datatype?
By the way if i define indextype without 'WITH ARRAY DML' option signature is clear, and working. But this approach doesn't satisfies our performance needs.
Also if i define index type with option 'WITH ARRAY DML WITHOUT COLUMN DATA' and use signature
static function ODCIIndexInsert(ia sys.odciindexinfo,   ridlist sys.odciridlist, env sys.ODCIEnv) return number
Everything works too. But this approach doesn't satisfies our business needs.
Is it a way to define ODCIIndexInsert parameter types (in case of indexing number column) so that batch inserting works according to documentation ?
FUNCTION ODCIIndexInsert(
      ia ODCIIndexInfo,
      ridlist ODCIRidList,
      newvallist varray_of_column_type,
      env ODCIEnv)
I am attaching full sql script to recreate environment and reproduce the problem.
Type definition:
CREATE OR REPLACE TYPE index_methods AS OBJECT
step number,
STATIC FUNCTION ODCIGetInterfaces(ifclist OUT SYS.ODCIObjectList) RETURN NUMBER,
STATIC FUNCTION ODCIIndexCreate (ia SYS.ODCIIndexInfo, parms VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexAlter (ia sys.ODCIIndexInfo, parms IN OUT VARCHAR2, altopt number, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexDrop(ia SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexExchangePartition(ia SYS.ODCIIndexInfo, ia1 SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexUpdPartMetadata(ia sys.ODCIIndexInfo, palist sys.ODCIPartInfoList, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in sys.ODCINumberList, env in SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexDelete(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexUpdate(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, newval number, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexStart(sctx IN OUT index_methods, ia SYS.ODCIIndexInfo,
    op SYS.ODCIPredInfo, qi sys.ODCIQueryInfo, strt number, stop number, cmpval number, env SYS.ODCIEnv) RETURN NUMBER,
MEMBER FUNCTION ODCIIndexFetch(self IN OUT index_methods, nrows NUMBER, rids OUT SYS.ODCIridlist, env SYS.ODCIEnv) RETURN NUMBER,
MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER
CREATE OR REPLACE TYPE BODY index_methods IS
STATIC FUNCTION ODCIGetInterfaces(ifclist OUT sys.ODCIObjectList) RETURN NUMBER IS
BEGIN
ifclist := sys.ODCIObjectList(sys.ODCIObject('SYS','ODCIINDEX2'));
RETURN ODCIConst.Success;
END ODCIGetInterfaces;
STATIC FUNCTION ODCIIndexCreate (ia sys.ODCIIndexInfo, parms VARCHAR2, env sys.ODCIEnv) RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexCreate;
STATIC FUNCTION ODCIIndexDrop(ia sys.ODCIIndexInfo, env sys.ODCIEnv) RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexDrop;
STATIC FUNCTION ODCIIndexAlter (
ia sys.ODCIIndexInfo,
parms IN OUT VARCHAR2,
altopt NUMBER,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexAlter;
STATIC FUNCTION ODCIIndexUpdPartMetadata(
ia sys.ODCIIndexInfo,
palist sys.ODCIPartInfoList,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexUpdPartMetadata;
STATIC FUNCTION ODCIIndexExchangePartition(
ia sys.ODCIIndexInfo,
ia1 sys.ODCIIndexInfo,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexExchangePartition;
STATIC FUNCTION ODCIIndexInsert(
   ia sys.ODCIIndexInfo,
   ridlist sys.ODCIRidList,
   newvallist sys.ODCINumberList,
   env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexDelete(
   ia SYS.ODCIIndexInfo,
   rid VARCHAR2,
   oldval number,
   env SYS.ODCIEnv)
RETURN NUMBER IS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexUpdate(
   ia SYS.ODCIIndexInfo,
   rid VARCHAR2,
   oldval number,
   newval number,
   env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexStart(
sctx IN OUT index_methods,
ia SYS.ODCIIndexInfo,
op SYS.ODCIPredInfo,
qi sys.ODCIQueryInfo,
strt number,
stop number,
cmpval number,
env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
sctx := index_methods(1);
return ODCIConst.Success;
END;
MEMBER FUNCTION ODCIIndexFetch(
self IN OUT index_methods,
nrows NUMBER,
rids OUT SYS.ODCIridlist,
env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
end;
Problem workaround:
--drop function test_eq_fun;
CREATE FUNCTION test_eq_fun(a number, b number) RETURN NUMBER AS
BEGIN
IF a = b then
    RETURN 1;
ELSE
    RETURN 0;
END IF;
END;
--drop operator test_eq;
CREATE OPERATOR test_eq
BINDING (number, number) RETURN NUMBER
USING test_eq_fun;
--drop indextype test_index_type;
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML(number, sys.ODCINumberList)
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
--drop table test_table;
CREATE TABLE test_table (id NUMBER (19,0));
CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type;
insert into test_table values (1);

I get single for 1 row and batch for 2 or more rows in the following simplified simulation.
SCOTT@orcl12c> DESC SYS.ODCINUMBERLIST
SYS.ODCINUMBERLIST VARRAY(32767) OF NUMBER
SCOTT@orcl12c> CREATE OR REPLACE TYPE index_methods AS OBJECT
2 (
3    step number,
4    STATIC FUNCTION ODCIGetInterfaces(ifclist OUT SYS.ODCIObjectList) RETURN NUMBER,
5    STATIC FUNCTION ODCIIndexCreate (ia SYS.ODCIIndexInfo, parms VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
6    STATIC FUNCTION ODCIIndexAlter (ia sys.ODCIIndexInfo, parms IN OUT VARCHAR2, altopt number, env sys.ODCIEnv) RETURN NUMBER,
7    STATIC FUNCTION ODCIIndexDrop(ia SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
8    STATIC FUNCTION ODCIIndexExchangePartition(ia SYS.ODCIIndexInfo, ia1 SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
9    STATIC FUNCTION ODCIIndexUpdPartMetadata(ia sys.ODCIIndexInfo, palist sys.ODCIPartInfoList, env sys.ODCIEnv) RETURN NUMBER,
10    STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, rid in VARCHAR2, newval in NUMBER, env in SYS.ODCIEnv) RETURN NUMBER,
11    STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in your_type, env in SYS.ODCIEnv) RETURN NUMBER,
12    STATIC FUNCTION ODCIIndexDelete(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, env SYS.ODCIEnv) RETURN NUMBER,
13    STATIC FUNCTION ODCIIndexUpdate(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, newval number, env SYS.ODCIEnv) RETURN NUMBER,
14    STATIC FUNCTION ODCIIndexStart(sctx IN OUT index_methods, ia SYS.ODCIIndexInfo,
15       op SYS.ODCIPredInfo, qi sys.ODCIQueryInfo, strt number, stop number, cmpval number, env SYS.ODCIEnv) RETURN NUMBER,
16    MEMBER FUNCTION ODCIIndexFetch(self IN OUT index_methods, nrows NUMBER, rids OUT SYS.ODCIridlist, env SYS.ODCIEnv) RETURN NUMBER,
17    MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER
18 );
19 /
Type created.
SCOTT@orcl12c> CREATE OR REPLACE TYPE BODY index_methods IS
2 STATIC FUNCTION ODCIGetInterfaces(ifclist OUT sys.ODCIObjectList) RETURN NUMBER IS
3 BEGIN
4    ifclist := sys.ODCIObjectList(sys.ODCIObject('SYS','ODCIINDEX2'));
5    RETURN ODCIConst.Success;
6 END ODCIGetInterfaces;
7
8 STATIC FUNCTION ODCIIndexCreate (ia sys.ODCIIndexInfo, parms VARCHAR2, env sys.ODCIEnv) RETURN NUMBER IS
9 BEGIN
10    RETURN ODCIConst.Success;
11 END ODCIIndexCreate;
12
13 STATIC FUNCTION ODCIIndexDrop(ia sys.ODCIIndexInfo, env sys.ODCIEnv) RETURN NUMBER IS
14 BEGIN
15    RETURN ODCIConst.Success;
16 END ODCIIndexDrop;
17
18 STATIC FUNCTION ODCIIndexAlter (
19    ia sys.ODCIIndexInfo,
20    parms IN OUT VARCHAR2,
21    altopt NUMBER,
22    env sys.ODCIEnv)
23 RETURN NUMBER IS
24 BEGIN
25    RETURN ODCIConst.Success;
26 END ODCIIndexAlter;
27
28 STATIC FUNCTION ODCIIndexUpdPartMetadata(
29    ia sys.ODCIIndexInfo,
30    palist sys.ODCIPartInfoList,
31    env sys.ODCIEnv)
32 RETURN NUMBER IS
33 BEGIN
34    RETURN ODCIConst.Success;
35 END ODCIIndexUpdPartMetadata;
36
37 STATIC FUNCTION ODCIIndexExchangePartition(
38    ia sys.ODCIIndexInfo,
39    ia1 sys.ODCIIndexInfo,
40    env sys.ODCIEnv)
41 RETURN NUMBER IS
42 BEGIN
43    RETURN ODCIConst.Success;
44 END ODCIIndexExchangePartition;
45
46 STATIC FUNCTION ODCIIndexInsert(
47      ia sys.ODCIIndexInfo,
48      rid VARCHAR2,
49      newval NUMBER,
50      env sys.ODCIEnv)
51 RETURN NUMBER IS
52 BEGIN
53    dbms_output.put_line ('single');
54    return ODCIConst.Success;
55 END;
56
57 STATIC FUNCTION ODCIIndexInsert(
58      ia sys.ODCIIndexInfo,
59      ridlist sys.ODCIRidList,
60      newvallist your_type,
61      env sys.ODCIEnv)
62 RETURN NUMBER IS
63 BEGIN
64    dbms_output.put_line ('batch');
65    return ODCIConst.Success;
66 END;
67
68 STATIC FUNCTION ODCIIndexDelete(
69      ia SYS.ODCIIndexInfo,
70      rid VARCHAR2,
71      oldval number,
72      env SYS.ODCIEnv)
73 RETURN NUMBER IS
74 BEGIN
75    return ODCIConst.Success;
76 END;
77
78 STATIC FUNCTION ODCIIndexUpdate(
79      ia SYS.ODCIIndexInfo,
80      rid VARCHAR2,
81      oldval number,
82      newval number,
83      env SYS.ODCIEnv)
84 RETURN NUMBER AS
85 BEGIN
86    return ODCIConst.Success;
87 END;
88
89 STATIC FUNCTION ODCIIndexStart(
90    sctx IN OUT index_methods,
91    ia SYS.ODCIIndexInfo,
92    op SYS.ODCIPredInfo,
93    qi sys.ODCIQueryInfo,
94    strt number,
95    stop number,
96    cmpval number,
97    env SYS.ODCIEnv)
98 RETURN NUMBER AS
99 BEGIN
100    sctx := index_methods(1);
101    return ODCIConst.Success;
102 END;
103
104 MEMBER FUNCTION ODCIIndexFetch(
105    self IN OUT index_methods,
106    nrows NUMBER,
107    rids OUT SYS.ODCIridlist,
108    env SYS.ODCIEnv)
109 RETURN NUMBER AS
110 BEGIN
111    return ODCIConst.Success;
112 END;
113
114 MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER AS
115 BEGIN
116    return ODCIConst.Success;
117 END;
118 end;
119 /
Type body created.
SCOTT@orcl12c> CREATE FUNCTION test_eq_fun(a number, b number) RETURN NUMBER AS
2 BEGIN
3    IF a = b then
4       RETURN 1;
5    ELSE
6       RETURN 0;
7    END IF;
8 END;
9 /
Function created.
SCOTT@orcl12c> CREATE OPERATOR test_eq
2 BINDING (number, number) RETURN NUMBER
3 USING test_eq_fun
4 /
Operator created.
SCOTT@orcl12c> CREATE INDEXTYPE test_index_type
2 FOR
3 test_eq(number, number)
4 USING index_methods
5 WITH ARRAY DML(number, your_type)
6 WITH LOCAL RANGE PARTITION
7 WITH SYSTEM MANAGED STORAGE TABLES
8 /
Indextype created.
SCOTT@orcl12c> CREATE TABLE test_table (id NUMBER (19,0))
2 /
Table created.
SCOTT@orcl12c> CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type
2 /
Index created.
SCOTT@orcl12c> insert into test_table values (1)
2 /
single
1 row created.
SCOTT@orcl12c> insert into test_table
2 select 2 from dual union all
3 select 3 from dual
4 /
batch
2 rows created.
SCOTT@orcl12c> insert into test_table select deptno from dept
2 /
batch
4 rows created.
SCOTT@orcl12c> insert into test_table select object_id from user_objects
2 /
batch
34 rows created.
SCOTT@orcl12c>

Creating Logical Component in Solman 7.1

Hi,
I want to create a Logical component for my SAP ECC managed system, could you please let me knowhow to create it.
OR is there any standard SAP document available on how to create Logical component in Solman 7.1 SP10.
Regards
P Kumar

hI kUMAR,
Check in SOLMAN 7.1 master guide which is available in SAP marketplace.
You can try below for creating logical component in SOLMAN:
1)Make sure that managed system has correct details in LMDB (like product components,version...etc)
2)Go to SMSY-->click on logical components in left hand side-->search for your product version i.e ERP 6.0 or Netweaver 7.0 or SCM etc.
3)Expand ERP 6.0 (in ur case)-->right click -->create logical system-->Give logical system name and version details-->Save
4)After that select systems i.e Dev system ,QUA system,PROD system of your ECC ,Then save
Thanks,
Prakash

Is it possible to create Resuable component in Swing

Can Some one tell me Is it possible to create Resuable component in Swing?
I have around 100 applications and i have to create a common Component and I have to use for this to all 100 Applications.
If possible can u send me code.
Thanks
Mohan Kumar

Hi Prosun Bondopadhyay ,
Component controller is the base of a wda component. its can be considered as the base class. all the other views can be considered as the sub classes of component controller. so without the base class there is no existence for sub class rt?
like we can use all the methods and attributes of a component controller(main class) across all the view(sub class) and the viceversa is not possible.
hence we cannot create a wda without component controller.
Regards
Sarath

Cannot create ActiveX component

So, I've looked all over for an answer for this one and so far, everything I've seen offered as fixes do not work.
Exception Details: System.Exception: Cannot create ActiveX component.
Source Error:
Line 39:
Line 40: ' Create Acrobat Application object
Line 41: PDFApp = CreateObject("AcroExch.App")
I have a webserver on which is installed the latest version of Acrobat Standard.
Here is my code:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Web.Configuration
Imports System.Data.OleDb
Imports System.Security
Imports System.Security.Principal
Partial Class CodeTest
 Inherits System.Web.UI.Page
 Dim LOGON32_LOGON_INTERACTIVE As Integer = 2
 Dim LOGON32_PROVIDER_DEFAULT As Integer = 0
 Dim impersonationContext As WindowsImpersonationContext
 Declare Function LogonUserA Lib "advapi32.dll" (ByVal lpszUsername As String, _
 ByVal lpszDomain As String, _
 ByVal lpszPassword As String, _
 ByVal dwLogonType As Integer, _
 ByVal dwLogonProvider As Integer, _
 ByRef phToken As IntPtr) As Integer
 Declare Auto Function DuplicateToken Lib "advapi32.dll" ( _
 ByVal ExistingTokenHandle As IntPtr, _
 ByVal ImpersonationLevel As Integer, _
 ByRef DuplicateTokenHandle As IntPtr) As Integer
 Declare Auto Function RevertToSelf Lib "advapi32.dll" () As Long
 Declare Auto Function CloseHandle Lib "kernel32.dll" (ByVal handle As IntPtr) As Long
 Private Sub savePDFtoTIF(ByVal fullPathPDF As String, ByVal fullPathTIF As String)
 Dim PDFApp As Acrobat.AcroApp
 Dim PDDoc As Acrobat.CAcroPDDoc
 Dim AVDoc As Acrobat.CAcroAVDoc
 Dim JSObj As Object
 If impersonateValidUser("XXXXXXX", "", "XXXXXXXXXX") Then
 ' Create Acrobat Application object
 PDFApp = CreateObject("AcroExch.App")
 ' Create Acrobat Document object
 PDDoc = CreateObject("AcroExch.PDDoc")
 ' Open PDF file
 PDDoc.Open(fullPathPDF)
 ' Create AV doc from PDDoc object
 AVDoc = PDDoc.OpenAVDoc("TempPDF")
 ' Hide Acrobat application so everything is done in silentmode()
 PDFApp.Hide()
 ' Create Javascript bridge object
 JSObj = PDDoc.GetJSObject()
 ' Attempt to save PDF to TIF image file.
 ' SaveAs method syntax .SaveAs( strFilePath, cConvID )
 ' For TIFF output the correct cConvid is
 ' cCovid MUST BE ALL LOWERCASE.
 JSObj.SaveAs(fullPathTIF, "com.adobe.acrobat.tiff")
 PDDoc.Close()
 PDFApp.CloseAllDocs()
 ' Clean up
 System.Runtime.InteropServices.Marshal.ReleaseComObject(JSObj)
 JSObj = Nothing
 System.Runtime.InteropServices.Marshal.ReleaseComObject(PDFApp)
 PDFApp = Nothing
 System.Runtime.InteropServices.Marshal.ReleaseComObject(PDDoc)
 PDDoc = Nothing
 System.Runtime.InteropServices.Marshal.ReleaseComObject(AVDoc)
 AVDoc = Nothing
 undoImpersonation()
 Else
 lblStatus.Text = "Unable to impersonate"
 Exit Sub
 End If
 End Sub
 Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
 savePDFtoTIF("D:\DoH\998.110803030832.pdf", "D:\DoH\Project\000.tif")
 End Sub
 Private Function impersonateValidUser(ByVal userName As String, _
ByVal domain As String, ByVal password As String) As Boolean
 Dim tempWindowsIdentity As WindowsIdentity
 Dim token As IntPtr = IntPtr.Zero
 Dim tokenDuplicate As IntPtr = IntPtr.Zero
 impersonateValidUser = False
 If RevertToSelf() Then
 If LogonUserA(userName, domain, password, LOGON32_LOGON_INTERACTIVE, LOGON32_PROVIDER_DEFAULT, token) <> 0 Then
 If DuplicateToken(token, 2, tokenDuplicate) <> 0 Then
 tempWindowsIdentity = New WindowsIdentity(tokenDuplicate)
 impersonationContext = tempWindowsIdentity.Impersonate()
 If Not impersonationContext Is Nothing Then
 impersonateValidUser = True
 End If
 End If
 End If
 End If
 If Not tokenDuplicate.Equals(IntPtr.Zero) Then
 CloseHandle(tokenDuplicate)
 End If
 If Not token.Equals(IntPtr.Zero) Then
 CloseHandle(token)
 End If
 End Function
 Private Sub undoImpersonation()
 impersonationContext.Undo()
 End Sub
End Class
The impersonation works, as I use the same code on another page where I am manipulating file system objects through that account, with this code. Also, the code without the impersonation, works on my local machine perfectly.
Any ideas on what to do would be greatly appreciated.
Justice

Look, I got dragged into a project that was late from the start, but is a big contract for the printing company that I work for that uses a lot of Adobe products internally for what they do.
In good faith, I tried to purchase something that would work. I was in a rush and didn't read the entire EULA as I was installing it. Obviously, I wasn't trying to screw the system or I wouldn't have been here, posting about it. I also do not need an education about what is true or false on the internet. I need a solution now that is going to meet the customers needs based on what is provided here. Rather simple, and don't reallly have the time for an entire formalized consultation as to our "business needs", since this is really all we need it for and time is of the essence.
If the best Adobe can do is publicly slap customers around on forums and throw vague answers out to follow up on, then I guess it's time to seek out other solutions for our business needs.

Help to create a component model using Calculator Web Service :(

Hello All,
Im working on EP6 SP9 and have a Calculator Web Service.
I want to create a component which should contain following UI elements:
1. InputField - to enter 1st number
2. InputField - to enter 2nd number.
3. TextView - To show the result
The calculator web service consists of 4 basic methods like addition, subtraction, division & multiplication.
I want to know whether how can I provide seperate buttons to each of the above mentioned functions 'coz when I add the web service while creating a component using SAP Web Dynpro (using SAP NEtweaver Developer Studio 2.0.9) - Model Creation step, I get an option to select only one method (and that is add).
Its not working......
I am following the steps as mentioned in help pages on Web Dynpro, section "Web Dynpro & Web Services" and example on WebServiceEmail.
Please help.......
I have to show this in a presentation on coming Friday.
Awaiting Reply.
Thanks and Warm Regards,
Ritu R Hunjan


Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

How can I create the component like ComboBox in flashlite2.0 ?

How can I create the component like ComboBox in flashlite2.0
I'm a new man, please gave me an example!
Thanks.

I don't see anything special about the play button in MPMoviePlayerController....
the "glowing" effect icons are all standard UIBarButtonItem objects:
http://developer.apple.com/iphone/library/documentation/UIKit/Reference/UIBarBut tonItem_Class/Reference/Reference.html

How to create dummy pricture which can be used for chart in msword

I want to create a chart in template,but have problem with creating dummy picture , is there any one could tell me how to create a dummy picture in msword. Thanks

First create a chart.
Now right click on chart > format picture > web
copy the code.
now you may delete it.
insert a picture which you want.
right click > format picture > web
paste the code.
done.

Need help in finding open source for creating Login component

hi
Pls any one help me out in finding some good open source for creating login component for my application
i have heard about josso but i am not able to find how to use it if anyone can help in setting up josso i wil be very thankful to that person and also if anyone can help me finding some other open source i will be very grateful ,,
Pls help its very urgent and i am running short of time

DECODE(l.attribute_category, 'Coverage Template Header', l.attribute3) Penalty_Bonus,
DECODE(l.attribute_category, 'Coverage Break', l.attribute1) Mon_Break_Start,
DECODE(l.attribute_category, 'Transaction Type', l.attribute1) Split_Covering,Uh oh, the dreaded entity attibute value, or generic, data model.
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:10678084117056
I am afraid slow performance is a built in feature of this database design, not much you can do in queries.
You could possibly create the views as materialized views and query those instead.
Quote from the linked article
But, how does it perform? Miserably, terribly, horribly. A simple "select
first_name, last_name from person" query is transformed into a 3-table join with
aggregates and all. Further, if the attributes are "NULLABLE" - that is, there
might not be a row in OBJECT_ATTRIBUTES for some attributes, you may have to
outer join instead of just joining which in some cases can remove more optimal
query plans from consideration.
Writing queries might look pretty straightforward, but it's impossible to do in
a performant fashion.

Creating a dynamic Array

Thanks for reply.
I want to create a dynamic array and for this I used ArrayList Collection and Vector Class. I am using JDK 1.4.1 . But , I have a problem in that. In ArrayList, I used the following code:
ArrayList al = new ArrayList();
while(rs.next())
al.add(rs.getString("Enter_Year"));
al.add(rs.getString("UG_Production_Mi_Te"));
al.add(rs.getString("OC_Production_Mi_Te"));
al.add(rs.getString("Total_Production_Mi_Te"));
al.add(rs.getString("OBR_MM3"));
al.add(rs.getString("OMS_Te"));
al.add(rs.getString("Coal_Offtake_Mi_Te"));
al.add(rs.getString("Supply_to_Steel_Plant_Th_Te"));
al.add(rs.getString("Royalty_SalesTax_MP_Crs"));
al.add(rs.getString("Royalty_SalesTax_CG_Crs"));
al.add(rs.getString("Total_ManPower"));
al.add(rs.getString("Fatality_Rate_per_Mi_Te_Output"));
al.add(rs.getString("Total_Wellfare_Expenditure_Crs"));
String rpt[][] = new String[al.size()][];
rpt = al.toArray(rpt); // ArrayStoreExecption error
String colheads[] = {"...........My Table's Column names are here....."};
JTable table = new JTable(rpt,colheads);
JScrollPane jsp = new JScrollPane(table);
add(jsp);
At the statement having comment line I received the error ArrayStoreException. The JTable accepts the 2 D array for storing the info and I think the toArray() method is not working there and can't convert the ArrayList elements into an Array. Similarily, Vector Class is also not converting the elements into an array object and showing the same error only.
Please help me to convert it into an array object so that I can pass it into the JTable argument.

That isn't a jdbc problem but rather a collection problem.
You certainly can't convert a one dimensional collection into a two dimensional array automatically. And that is what you are creating with the while loop.
Since you know the column names you also know the inner array size so you can start by creating a statically sized string array (not collection) in the loop and add that to the outer collection. That might solve the problem.

How to assign values to instances of a method created via an array

i have created an array of the PlayerRecord instance called currentPlayers and im trying to use another array of Strings to give names to the players (currentPlayers[instance].name) but it is failing horribly
when i try to name them one at a time as seen in the code here it seems to compile fine, but when i test it with a System.out.println(currentPlayers[0].name); it tells me "Exception in thread "main" java.lang.NullPointerException"
Im assuming this happens because the instances of PlayerRecord were created using an array, therefore i could not give the PlayerRecord a name value to begin with, but shouldnt currentPlayers[0].name = namesarray[0]; make up for that and give the value in namesarray[0] to currentPlayers[0].name? therefore allowing me to display the value held in currentPlayers[0].name without the error?
public class Round
     public static PlayerRecord[] currentPlayers = new PlayerRecord[15];
     public Round(String[] namesarray)
     currentPlayers[0].name = namesarray[0];
     System.out.println(currentPlayers[0].name);
public class test
public static void main (String[] args)
String[] namelist= {"a", "b", "c", "d", "e", "f", "g", "h", "i", "j", "k", "l","m", "n", "o", "p"};
Round one = new Round(namelist);
public class PlayerRecord
     public String name;
     public PlayerRecord(String playername)
          name = playername;
}

unfortunately the rest of the program relies on being
able to change the number of elements in the array,
so in the end a variable would take the place of the
15 in
public static PlayerRecord[] currentPlayers =
new PlayerRecord[15];so that would not work
It 'works', just not the way you supposed it would. :^)
It initializes an array of 15 elements with references to type Round. You need to assign those references to instances. The only way to create instances is via the 'new' keyword.
im surprised java isnt up there in the top reasons
for suicide
It's too early in the week for me to start drinking.....
actually now that i think about it, i could make it
work by having a definite amount of elements in the
array, but the array of names cannot be read since
they are connected to the Round method
Correct me if I am wrong, but you do already have a definite number of elements in your array. 15.
so basically the creation of the array of
currentPlayers has to be before the Round method, yet
the naming of the players has to happen in the Round
method, is there any way this can be done?
Round is not a method. It is your class's constructor (I think). Right before calling the setter for 'name', call 'new' and assign the created Round instance to that array element (in your case '0').
Then call 'name'.
Message was edited by:
s34nsm411- Saish

Create dummy component array

Similar Messages

Maybe you are looking for