Create DVD files for web

This question was posted in response to the following article: http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-7cb60a1912fd358c4a5- 7ff7.html

The transport controls are present when the screen is scrolled down. Sorry I hadn't investigated this more completely befor posting the original question.

Similar Messages

Convert dvd file for web ...

I have a dvd disk that a friend sent to me that he made of a home video. I would like to get that dvd disk and have to converted or compress so that I can upload it to my site.
I have done a similar project, but only with raw mpeg-4 files. Not sure how to go about doing this when the footage has already been converted to dvd format.
any suggestions would be appreciated. I tried to used compressor but it will not recongized the .vob files.

normally I wouldnt suggest this, but since your going to web and probably scaling it down to 320x240 anywayd it shouldnt matter. Pop your dvd into a dvd player (set top) then plug that into your camera and then plug your camera into your computer. Capture the whole thing and then export that through compressor and it should look pretty good. You could also get some kind of app that pulls the vob files apart and gives the streams that were on it. These probably cost money though. Good luck hope this helps.

Using Compressor to create QuickTime file for Web

Have: a 2 minute clip, shot in HD, edited in FCP7. Exported it as a FCP QuickTime movie, 1080i60, size is 441MB.
Need to: take that QuickTime file into Compressor and create a much smaller file, which will ultimately be converted to Flash and posted on a Web site. Have tried various QuickTime outputs in Compressor -- the resulting files are either too large, blurry, or lose the widescreen aspect ratio.
Please, help.

Here's what I would try:
QuickTime Movie: h.264 compression @ 1500 Kbps
Screen Resolution: 640 x 360.
Audio: AAC @ 128 Kbps.

Which folder i have to put my .jsp file for web report?

for web report(not the paper report) i put my .jsp files in the
\reports\j2ee\reports_ids\web
folder
this is for the DS(Developer Suite)
i'm trying to move this file to different machine where AS(Application Server)
is installed.
but couldn't find above path. where do i have to put .jsp file for
web report?
or do i have to modify in the registry? if so, where?
Thanks

Hello,
Take a look to the thread :
where to add new jsp reports directory location in path
"...You have to keep jsp files under document root that is OH/j2ee/OC4J_BI_Forms/applications/reports/web directory. You can create sufbolders under this directory and keep jsp files. ..."
Regards

Create .SCA file for MII project

Please let me know the steps in creating .SCA file for deploying MII projects developed using WorkBench with login page. I think that after creating the .SCA file we can deploy it using Eclipse under the menu Deploy View Console or using JSPM. After deploying we should be able to login using the credentials and should be redirected based on roles to appropriate pages.
I had deployed the intial .SCA file named (XMII08_0-20004625.SCA) using JSPM. MII version used is 12.1.8 and Netweaver version is NW CE 7.1 EHP1 SP5.
How we can set up the development environment in Eclipse or NetWeaver Developer Studio for MII project development so that we can directly create MII SCA file from the tool itself. Please share documents if any.

I need to modify the default login page in MII and redirect it to different URLs based on roles.
I am able to change the images in the default Menu.jsp in the NetWeaver login to Authentication page and inside properties tab. There I am able to change the images like branding-image.jpg, SAP NetWeaver image, SAP Image. But this is reflected in both the URLs
http://servername:50000/nwa and http://servername:50000/XMII/Menu.jsp
Then I changed the web.xml inside war file (tcsecumelogonui.war) which is in the path InstanceDirectory:\usr\sap\CE1\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources with the new Login.jsp file instead of Menu.jsp for the servlet tags but still when I access the new Login.jsp page from the URL http://servername:50000/XMII/Login.jsp it is still showing Menu.jsp. But when I tried to login using the Menu.jsp page then it is redirected to my new Login.jsp page.
Please let me know how I will be able to change and deploy a new login page in MII 12.1.8 and with NetWeaver CE 7.1 EHP1 SP5.

I am getting error while creating Control file for a fla file upoad in HANA

Hi Experts,
I am getting the following error when I try to create crtrol file for a flat file extraction in SAP HANA.
Could not execute 'import data into table P935718."COPATBL" from 'COPATBL.csv' record delimited by '\n' fields ...'
SAP DBTech JDBC: [257] (at 14): sql syntax error: incorrect syntax near "into": line 2 col 1 (at pos 14)
Here is the code I have used to create control file after I creating the table.
import data
into table P935718."COPATBL"
from 'COPATBL.csv'
    record delimited by '\n'
    fields delimited by ','
    optionally enclosed by '"'
error log 'P935718.COPATBL.err'
p935718 is my user ID, COPATBL is my table created, COPABL.CSV is a flat file.
Please help me in this regard.
Thanks,
Guna

Hello,
guessing from the error message it looks that you are trying to execute "import data" as SQL command.
Please note that import data is NOT SQL command but it is syntax for control file. You need to create file with this syntax on server and then use command: IMPORT FROM '/<path>/<filename>.ctl'
In a shortcut:
1.- create comma separated CSV file with your data - <source cvs>.csv
2.- upload CVS file to HANA server
3.- create the control file <filename>.ctl:
import data
into table <schema>."<table name>"
from '<source cvs>.csv'
record delimited by '
fields delimited by ','
optionally enclosed by '"'
error log '<file name>.err'
4.- execute command:
IMPORT FROM '/<path>/<filename>.ctl'
Please check following threads:
How to load CSV files into HANA
Will HANA supports Bulkload
Tomas

I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway inst

I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway installing PSE-10 or uninstalling it. If I send the PDF file that has been automatically converted to a PSE-10 the person I send the file to can not open it because they do not have PSE-10. What can I do to stop PSE-10 from converting my PDF files? Don't tell me to upgrade PSE-10 I tried their on-line program and it is too advance for a hobby photographer like myself and their Help Desk is impossible to reach.

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

Creating setup file for java

Somebody tell me how to create setup file for the software which is made by using java programming. We can create jar file for that purpose but I want to create setup file or exe file.

open source
- izpack (windows, linux, macos) www.izforge.com or org
- nsis.sf.net (winblows only)
commercial
- www.zerog.com 's InstallAnywhere

Can i create different file for my movies

I need to create diferent file for movies, but i don't know how to do it

i want to creat like a play list but for movies, can i do that

Creating UNIX file for RFBIBL00

Hi All,
I am creating the file for the RFBIBL00 program to use.
I am filling in structures
BGR00 - SESSION
BBKPF - HEADER
BBSEG - DOCUMENT
so in my I am planning for my file to contain
1 session rec
1 header rec
multiple document recs
is there any specific way to format the file? like spacing between variables? I see that the "/" is used for special chars.
I am just wondering what is the correct way to setup this file so the RFBIBL00 will process it?
thanks
Keith

here is the documentation on the strucures:
<< Please do not post copyrighted material here >>
Edited by: Rob Burbank on Jun 19, 2009 2:15 PM

How to create xpi file for my own extension?

I have created my own extension and directly added profile extension folder in my system.its working fine. but while installing extension using .xpi file its produce error "Install script not found
-204".Please explian me how to create .xpi file for my extension folder.
I hope you can help this issues.
Thanks in advance.
Regards
vasanthi

See this:
https://developer.mozilla.org/en/Building_an_Extension

How to create search help for Web Dynpro?

Hi all,
I have troubles when creating search help for web dynpro. I have visited this link /people/dirk.rehberg/blog/2006/12/27/generic-search-help-for-web-dynpro-for-java but I can't find this generic search help plug-in for download. If u have this plug-in can u share it for me or upload somewhere for download. Or anyone has already done this search help please help me solve this problem! Thanks in advance!

Hi Dinh Thieu Thien,
please place such a request to the appropriate forum "[Web Dynpro for Java|Web Dynpro Java;".
Thanks and regards,
Boris

How to create a file under web application root from java program

how to create a file under web application root from java program like an action class?

like an action class?Huh? What exactly is your requirement?
Creating a file is usually done with java.io API. Read the java.io tutorials how to play with files.

Makepkg issue: cannot create temp file for here-document

Hi there,
Since few weeks ago i'm not able to build aur packages. I use yaourt but i notice the problem comes from makepkg (i searched for the output message and found fakeroot related issues). Here the complete log of, for example, launching makepgk on with the ruby-headers PKGBUILD:
$ makepkg
==> Creazione del pacchetto: ruby-headers 1.9.2_p136-1 (mer 9 feb 2011, 00.27.35, CET)
==> Controllo delle dipendenze per l'esecuzione in corso...
==> Controllo delle dipendenze per la compilazione in corso...
==> Download dei sorgenti in corso...
-> Download di ruby-1.9.2-p136.tar.bz2 in corso...
--2011-02-09 00:27:35-- ftp://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.2-p136.tar.bz2
=> "ruby-1.9.2-p136.tar.bz2.part"
Risoluzione di ftp.ruby-lang.org... 221.186.184.68
Connessione a ftp.ruby-lang.org|221.186.184.68|:21... connesso.
Accesso come utente anonymous ... Login eseguito!
==> SYST ... fatto. ==> PWD ... fatto.
==> TYPE I ... fatto. ==> CWD (1) /pub/ruby/1.9 ... fatto.
==> SIZE ruby-1.9.2-p136.tar.bz2 ... 8819324
==> PASV ... fatto. ==> RETR ruby-1.9.2-p136.tar.bz2 ...
Errore nella risposta del server, chiusura della connessione di controllo.
Altro tentativo in corso.
--2011-02-09 00:28:47-- ftp://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.2-p136.tar.bz2
(tentativo: 2) => "ruby-1.9.2-p136.tar.bz2.part"
Connessione a ftp.ruby-lang.org|221.186.184.68|:21... connesso.
Accesso come utente anonymous ... Login eseguito!
==> SYST ... fatto. ==> PWD ... fatto.
==> TYPE I ... fatto. ==> CWD (1) /pub/ruby/1.9 ... fatto.
==> SIZE ruby-1.9.2-p136.tar.bz2 ... 8819324
==> PASV ... fatto. ==> RETR ruby-1.9.2-p136.tar.bz2 ... fatto.
Lunghezza: 8819324 (8,4M) (non autorevole)
100%[====================================================================>] 8.819.324 107K/s in 1m 58s
2011-02-09 00:30:51 (72,8 KB/s) - "ruby-1.9.2-p136.tar.bz2.part" salvato [8819324]
==> Validazione dei file sorgenti con md5sums in corso...
ruby-1.9.2-p136.tar.bz2 ... Verificato
==> Estrazione dei sorgenti in corso...
-> estrazione di ruby-1.9.2-p136.tar.bz2 con bsdtar in corso...
==> Avvio di build() in corso...
==> Entrata nell'ambiente di fakeroot in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
==> Avvio di package() in corso...
==> Rimozione dei dati superflui in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Rimozione degli altri file in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Compressione delle pagine man ed info in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Rimozione dei simboli non necessari dai binari e dalle librerie in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
==> Creazione del pacchetto in corso...
-> Generazione del file .PKGINFO in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Compressione del pacchetto in corso...
xz: /tmp/rb_hdrs/ruby-headers-1.9.2_p136-1-any.pkg.tar: impossibile rimuovere: Successo
Hints?
Thanks in advance

That time it was in /tmp/ruby_headers (which i created) but it happens with yaourt too and for every pkg i tried.
[miche@bob tmp]$ yaourt -S ruby_headers
ruby_headers non trovato su AUR
[miche@bob tmp]$ yaourt -S ruby_header
ruby_header non trovato su AUR
^[[A[miche@bob tmp]$ yaourt -S ruby-headers
==> Continuazione dalla compilazione precedente
==> Scaricamento del PKGBUILD di ruby-headers da AUR...
Comment by: hilton on Tue, 28 Dec 2010 03:51:14 +0000
Updated to 1.9.2_p136!
First Submitted: Sat, 13 Nov 2010 20:25:52 +0000
ruby-headers 1.9.2_p136-1 : A package of all Ruby headers needed by some gems like ruby-debug.
( Pacchetto non supportato: Potenzialmente pericoloso ! )
==> Modificare il PKGBUILD (altamente raccomandato per ragioni di sicurezza) ? [S/n]("A" per annullare)
==> ----------------------------------------------
==>n
==> Dipendenze di ruby-headers
- ruby (già installato)
==> Continuare la compilazione di ruby-headers? [S/n]
==> ----------------------------------------------
==>s
==> Install or build missing dependencies for ruby-headers:
==> Compilazione e installazione del pacchetto
==> Dipendenze di ruby-headers
- ruby (già installato)
==> Creazione del pacchetto: ruby-headers 1.9.2_p136-1 (mer 9 feb 2011, 01.23.54, CET)
==> Controllo delle dipendenze per l'esecuzione in corso...
==> Controllo delle dipendenze per la compilazione in corso...
==> Download dei sorgenti in corso...
-> È stato trovato ruby-1.9.2-p136.tar.bz2
==> Validazione dei file sorgenti con md5sums in corso...
ruby-1.9.2-p136.tar.bz2 ... Verificato
==> Estrazione dei sorgenti in corso...
-> estrazione di ruby-1.9.2-p136.tar.bz2 con bsdtar in corso...
==> Rimozione dell'esistente directory pkg/ in corso...
==> Avvio di build() in corso...
==> Entrata nell'ambiente di fakeroot in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
==> Avvio di package() in corso...
==> Rimozione dei dati superflui in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Rimozione degli altri file in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Compressione delle pagine man ed info in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Rimozione dei simboli non necessari dai binari e dalle librerie in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
==> Creazione del pacchetto in corso...
-> Generazione del file .PKGINFO in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Compressione del pacchetto in corso...
xz: /tmp/yaourt-tmp-miche/aur-ruby-headers/ruby-headers/ruby-headers-1.9.2_p136-1-any.pkg.tar.xz: impossibile rimuovere: Successo
Error: Makepkg non ha potuto costruire il pacchetto ruby-headers.
[miche@bob tmp]$

Programmatically creating postscript files for office documents

Hi All
I am in the process of experimenting with vb.net to open up a word document in the background and create a postscript file, which i would then use to create a pdf. This currently is a windows service and seems to run ok when the same code runs through a windows form application.
The problem i am having is with the "When creating a postscript file you have to sent the host fonts" error message, which seems to be fairly common judging by numerous articles on various forums. However, none of the solutions seem to solve my problem.
I have set the "Do Not Send Fonts To Adobe PDF" option to OFF on printer defaults, on the current printer setup and even on the printer settings for that application (go to print, properties etc from within Word).
However, whenever i run the code i get the error message. I then made the instance of word visible and checked the application settings for the adobe pdf printer.... the "Do Not Send Fonts To Adobe PDF" is now ticked. But when i close this down, and open word as a normal user would and check the setting it is off! Why would this be?
Can i programmatically change this setting when word opens and before i run the post script file creation code? Where is this value for the setting stored? I do not understand why this is resetting in the instance of word through code? Is it something to do with setting the active printer and at this point using the default setting?
Any help would be appreciated.
Thanks in advance
Nic

You say you are doing this as Windows service – does this mean you are running this on a server of some sort? If so, that is NOT ALLOWED.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 26 Oct 2011 04:31:13 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Programmatically creating postscript files for office documents
Programmatically creating postscript files for office documents
created by nic.eastham<http://forums.adobe.com/people/nic.eastham> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3990878#3990878

Create DVD files for web

Similar Messages

Maybe you are looking for