Create ECC source systems to talk to BI

I am a developer and the system that I am working with do not have the source systems created. There is no Basis support here yet. Would someone help by listing the steps to create the source systems, so that the ECC systems can talk to the BI NW2004s system? I want to be able to load data.

Hi,
Please check these links.
Connection between Source Systems and BW
http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps
Regards.

Similar Messages

Create SAP Source System Failed

Hi all,
We are using NetWeaver 2004s BI and try to connect to ECC 5.0. I tried to create SAP source system but got error message saying "RFC user logon failed". When I check RFC destination in ECC 5.0 for BI, the test connection is ok, but the remote logon will pop up another logon screen asking for id and password. I am pretty sure that the id and password in RFC destination is correct. The RFC destination in BI is ok. Can you help me out with this? Thanks a lot in advance.

Hi,
Check the Default Logon <b>Client</b> for ECC 5.0
and verifiy that the User is in the Same Client
Each RFC destination has a mapped user for specific Client..Check the Client and User in the same client
regards
Happy Tony
Message was edited by: Happy Tony

Creating new Source system problem

Hi there,
System: BW 3.5 client 010, want to connect to R/3 4.6c Sandbox client 0101
we just refreshed our BW 3.5 sandbox with current production data. Now we want to create the source system via RSA1 to point to R/3 Sandbox. When we try to create this we get this new error. I am not sure why it is
Error:
Logical system BIX010 exists already
Message no. R3222
Diagnosis
The SAP Business Information Warehouse BIX010 is already connected to the source system. A multiple connection is not possible.
For some reason, it is reading as BIX010(talking to the system itself) - BW Sandbox systems, it should be doing the source system creation for SBX010 not BIX010 (talking to the system itself)
I tried to create the system manually and automatically, still no luck.
I cannot see SBX010 source system in teh RSA1, I am afraid it might be in the database table and not showing up in the transaction RSA1, does anyone know the table that it has this information, so I can se16 and look at the entries?
Does anyone knows where to look for?
Thanks in Advance
Kumar

Goto SM50 and check for ABAP connections. Look for SBX010. If you don'T find it here you have to create it. Check also BIX010 if it'S connected to the right system.
Regards,
Juergen

Creating multiple source systems one logical system

Hi,
The requirement is to create two source systems using same logical name and different RFC connections to ECC?
We wanted to do some regular activities using one source system and some drill down activities using different source system.
I am getting error when I try to create second source system "source system already exist"
Please advice.
Thanks.

Hi,
I dont think it is possible to create multiple source systems in a sinle logical client. You have to create multiple clients and you can connect to BI system by different RFCs.
Hope this helps.....
Regards,
Suman

Error when we create the source system file

i am creating the source system file of ECC to BI. how to slove this problam. when i am trying activating this error is getting.
The following errors occurred in the source system: RSAR 374
Result of the destination check: Timeout RSAR 375

Mr. Reddy,
Check out this links.
Error while source system creation/Source system transport
Hope it helps you.
SRS

Error when creating SAP source-system in RSA1

hi,
we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
<b>Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
Message no. R3225
Diagnosis
In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
System Response
Processing has been terminated and all changes undone.
Procedure
Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.</b>
i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
reg, Martin

mr. kapadia,
there is one entry in table rsbasidoc, and it looks like that:
SLOGSYS     D01MAND700
RLOGSYS     D01MAND700
OBJSTAT     ACT
BIDOCTYP    ZSCA017
TSIDOC3X    0
TSPREFIX    CA
SRCTYPE     M
SAPREL      700
TSTPNM      D78358
TIMESTMP    20.070.622.093.042
SBWBCRL     700
RBWBCRL     700
looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
reg, Martin

Creating new source system in bw

hi all
i have got one problem with creating source system to bw from r/3,i have created RFC connection to bw and r/3
and i was trying to create source system manually and automated but it is not activating i'm getting fallowing error
...the fallowing errors occurred in the source systemrsar--mess no 374
....result of destination check timeout rsarmess no 375
can any one help me on this please

Hi!
Check out the connection with defined RFC.if it is ok,then check out the privliges for the user using which yuor trying to create the source system.
Best Regards
Sunil.

Create sap-source system in netweaver

Hello,
i want to create a R/3-(4.6c)-source system in my Netweaver-BI (2004s), but I have problems with the connection.
For the connection i created in the Netweaver a new destination and a user "User_A" with the profile "S_BI-WX_RFC / Business Information Warehouse: RFC-User in Warehouse.
In the R/3 I created a user "User_B" with the profile "S_BI-WX_RFC / Business Information Warehouse, RFC-User Extraction"
After creating the Source-System in the AWB with the destination and the 2 Users, I have to Log-On as an administrator in the R/3. After Log-In comes the message "User already exists in source system. Only continue if Profile and Password Are Correct."
Then I have to create the Destination in the R/3. There I fill in the "Logon"-Part my "User_A", but then I get the alert:
RFC user logon failed. Check the connection. Message no. R3 077.
Diagnosis: You tried to logon using the RFC user. This action failed.
System response: Name or Password not correct
But I'm sure that I made no mistake with the password.
Has anyone an idea what I did wrong?
Thanks
Malte

Hi,
Generally we maintain the Destinations and userids in both systems first, and then create the source sytem in AWB of BIW.
Have you created the Logical system names in both the systems ?
Have assigned the client to the logical system name to client in both systems?
Have you mentioned correct client in the destinations?
With rgds,
Anil Kumar Sharma .P

Creating two source systems

Hi all,
Can I create two source systems in BW (RSA1) for the same R/3 system? I like to have one for FI and CO, and the other for HR and PY.
Thanks a lot,
Regards
Vic

Hi Roberto,
I need them for the same client.
Regards
Vic

Problem in creating SRM source system in BW

hi all,
as much i knw. i can say that there are 4 steps in creating SRM source system in BW :-
1) creating logical system for SRM client
2)creating logical system for BW client
3)naming background user
4)creating SRM source system in BW.
now i am facing some basic problems....
1) I logon to SRM system using client 001 so do i need to assign SRM logical system i am creating to this client only.
2) same way i logon to BW using client 800, so do i need to assign BW logical system to client 800.
3)how can i create background users for link to SRM.
4)does anything needs to be done in RFC.

Hi,
Once you read the following help on creating source system,Most of teh doubts will be cleared :
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
With rgds,
Anil Kumar Sharma .P

How to create WebService Source System?

Hi,
I am trying to integrate XI and BI. How do I create a webservice source system? When I create the webservice source system in RSA1, it asks for a logical system name. Do I need to create a RFC destination for this logical system? What other steps should be done here?
Thanks,
Deepthi

Thank you. I am actually referring to step 5 in the below how-to-guide.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
The step 5 says "create webservice source system". But, it does not give details as to what steps should be taken to actually create this. Anyone, used this approach?
Thanks,
Deepthi

Creating New Source System Connection

[First post, so go easy on me!]
I have created a source system connection in BW QA, to an additional R3 QA client, but I am unable to assign any datasources to the new this new connection. [I know that I should have created the connection in DEV and transported through, but I need this connection for a small test, that won't be used again.]
To get round this, do I need to have my BW & R3 clients 'opened' again, then transfer the 'Application Component Hierarchy' via RSA9, then 'Replicate Datasources' in BW. If not, does anyone have any suggestions?
Thanks in advance.
Scott

Scott,
You will have to transfer the BC datasources that you want to use from R/3 to BW.
in BW, right-click your source system in the modeling tab and select replicate datasources, this will take you through to your R/3 system. Select the datasources you want to use and transfer them. Then go back to your BW system and right-click the source system and select "Transfer datasources". This should make them available.
If when you have got through to R/3 to transfer the datasources you are told that cross-client customising is not available then I think that you will have to get the client opened up.
Cheers,
Stuart

Job not started (create) in source system when I start the infopackage

Hi experts...
I have a problem with a process. (infopackage)
This message in status during 17 hours.
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
After..
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I don't know how resolve this problem, the job that shoul be created in source system was not create.

Hello RBS,
As per the message posted ur idocs are in status 64 so u need to process those idocs manually and you can do this by going to transaction BD87 and reason u get this kind of problems is because you dnt have enough dialog process in application server or because of load balancing so contact your basis team if u face this kind of problem regularly.
Assining Points = Thanks in SDN
Thanks & Regards
Jai
Edited by: jai mam on Jul 8, 2008 4:19 PM

BW linked to two ECC source systems

Hi,
We are planning to create a sceneraio in whih our BW quality (client 350) will be linked to two different ECC clients (550 & 590).
Earlirer 350 was linked to 550 only.
Now the question is while transporting request from BW development (client 310) to BW Quality (350), will it ask the source system??
For which source sytem request will be transported, 550 or 590???
Pls. clear the concept.
Thanks in advance
Shilpi Gupta

Hi Shilpi,
It seems you are bit confused about the connection and the transport.Let me try to add some more points.
Your source system is ECCDEV (540) and the target source system is ECCQUALOTY (590) . Your BW Quality is 350.
BW quality is connected with two source system (590 and 550).
All your BW objects are source system independent other than Transfer rules. So whenver you transport any objects from BW development to Quality (like InfoObjects,InfoSource,InfoCube ,ODS,update rules etc) there is no problem with the source system connection. It just appears in your BW Quality .But your transfer rules is dependent on the source system. So when you transport the transfer rules,you need to make sure that which source system (Qty) should carry that changes i.e.transfer rule mappings.
So you need to maintain this settings in the above mentioned transaction code,even if you use only one source system.
Then only your transport changes will appear in your quality transfer rules.Even though your quality BW system is assigned to two source system ,only one system will carry that transfer rule mappings.Hence this mapping is required for any case.
You can change the mapping anytime (from 590 to 540) using this tcode to get the transfer rule mappings for the other system.
Thanks.

Creating CRM source system in BI 7.0

Hi Experts,
How to create a CRM source system in BI 7.0. Any procedures to be followed??....a step by step guide will be a great help at this point.
Thanks in advance
Shiva

Hi,
Normally connceitvity between BI and other SAP system will be same as creating RFC etc..........
Discussed in Forum : Re: CRM - BI Connectivity
Check the Following Link It will be useful for u :
http://help.sap.com/bp_bblibrary/600/HTML/C71_newBB_EN_US.htm ( After entering go-to congiguration Guide)
http://msdn.microsoft.com/en-us/library/dd433132.aspx
R/3 to BI :
http://www.sap-img.com/business/rfc-connection-on-the-bw-side.htm
http://www.sapdb.info/wp-content/uploads/2008/10/configuring_rfc_in_bi7_for_connecting_ecc6_server.pdf
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Jan 21, 2010 8:05 AM

Create ECC source systems to talk to BI

Similar Messages

Maybe you are looking for