Create entry for characteristic which is not in aggregation layer

Dear all,
I have an realtime cube with an aggregation layer on top for a planning application. For some reason I can not include one characterisctic in the aggregation layer.
Although I need a value for this characteristic, e.g. after each saving within the planning application.
Is there a way to create entries (constant) for specific characteristic which are not part in the aggregation layer.
We are running NW 7.1.
Any help would be great.
Best regards,
Stefan from Munich/Germany

Hi,
As tilak has mentioned above, you can use characteristic relationships to derive a characteristic data based on another charactereistic value.
The following are thr things are the things to be kept in mind whn using characteristic relationships,
1. Load the master data properly for the required characteristics if you are using relationship of type, either attribute or hierarchy.
2. If you want to derive rthe data based on your own requirements, use relationship of type DSO or Exit.
3. Make sure that the particular characteristic relationship after creation, inorder to use it in your planning application.
For more details, you can refer to the link, [Re: IP: Characteristic derivation during Transfer values|Re: IP: Characteristic derivation during Transfer values]
Rergards,
Balajee.

Similar Messages

Not able to create entries for ALBTCMON (SCM 4.10)

I am trying to create entries for monitoring jobs that start with "SAP_*" and I am trying to add entry into ALBTCMON table. But system is trowing the message as below.
===============================================================
Create data processing function module
Message no. SV023
Diagnosis
You have called the function for editing view contents. The function modules needed for the maintenance functionality of this view are not available in the system.
Procedure
The data processing function module must be re-generated.
Contact the system administration.
===============================================================
Can somebody tell whats wrong. I am working in SCM 4.10.
Regards,
Giridhara

Make sure the xWebsites metadata field has the siteId of your site. And as Srinath said, make sure it's "Released"; which can take a moment or two.

Create subnumber for asset which already has book value RM1.

Hi everybody,
Can i create subnumber for asset which has been depreciated until RM1 book value ? This asset has a few quantity and need to be breakdown to different cost center ? If yes, how ? AS11 or AS94 ?

Hi,
Thanks Andreas. However, the asset is an old asset (already reached RM1 book value). I have tried to use AS94, but hits an error " Legacy data transfer year is not last closed fiscal year 2007". FYI the take over date in the system is 31/3/1998 while closed fiscal year is 2006. Now we are in fiscal year 2007 (Apr to Mac). If i were to change the take over date to become 31/3/2007, is there any impact to the depreciation run for other assets in the system. I'm worried if i change the take over date, the depreciation will get haywired.

Create entry for remote system necessary?

Hello,
is it necessary to start in CEN transaction RZ21 u2192 Technical infrastructure u2192 Configure Central System u2192 Create entry for remote system.
What is the result of this transaction and why is a <sid>adm user needed?
Thanks

Hello,
I take you mean you have a JMS queue created in an Oracle database (A) and you want to propagate messages to a JMS queue create in an Oracle database (B)?
If that is the case you use normal AQ propagation. You can follow <Note:102771.1> as an example changing the ADT as appropriate, etc.
MGW is only to be used for Oracle to 3rd-party propagation.
Thanks
Peter

Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?p

can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?

The problem is I cannot turn on wireless setting. The "sign in to icloud -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again. If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work. Vicious circle.

I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i have reset the ipad and restored it to no avail

How to creat commitment for PO PR but not creat statistical cost for GR

Hi,
Quantities and Values in Valuated Project Stock: Example - Material - SAP Library
Planning
Material FIN-M is assigned to network activity V10 and is managed in the project stock for WBS element P/4711.1.
The network type is flagged as appended and apportioned to the WBS.
Before the first MRP planning run or before the planned orders are converted into purchase requisitions or production orders, the following amounts appear in WBS element P/4711.1:
Planned costs of $500,00
Remaining order plan value of $300,00
The MRP controller begins by converting the planned orders. First, the planned order for the material RAW-M is converted into a purchase requisition and the planned order for the material SEMI-M is converted into production order A2.The order type is flagged as not appended and apportioned to the WBS.The remaining order plan value in the WBS element changes by the amount of the internal activities portion of production order A2 to $400,00 (300,00 + 100,00).After the purchase requisition is converted into a purchase order, a cost commitment of $50,00 also appears in WBS element P/4711.1.
External Procurement
Valuated goods are received for the purchase order, but the price is $10 different at $60. Assuming that material RAW-M is price-controlled, this gives rise to a debit posting of $60,00 in the stock account and credit posting of $60 in the GR/IR clearing account (Financial Accounting).If the inventory accounts was created as a cost element in CO, the following appear in WBS element P/4711.1:
Statistical actual costs of $60,00 in the stock cost element
A cost commitment of $0,00
If material RAW-M is price-controlled the standard price is $50,00, the postings in Financial Accounting are: $50,00 debit to a stock account $10,00 debit to a price difference $60,00 credit to the GR/IR clearing account
In this case, the only figure in the WBS element would be statistical actual costs of $50,00.
Above excerpt from SAP help, may I know how to do configuration to creat commitment for PO PR but not creat statistical cost for GR?
Thanks and regards,
Ray

Hello Jie,
if i right assuming your query then PR->PO= Commitment should be created.
but GRN by MIGO=Statistical cost should not create once MIGO if right then actual cost would be 0.
you can activate commitment by OKKP transaction.
And you want to cost should not be statistical after MIGO right?
here solution is cost never statistical type until account assignment object not statistical type this is my assumption.
if this is the issue then check G/L account from the PO. then check that G/L account, whether it is a B/S account or P&L account? I think you have wrongly assigned P&L account.
Regards,
Sanjeev

Create of (demo for)OVAI (transaction for create entries for each vendor)

hi all,
can anyone plz tell me how 2 create (demo for)OVAI (transaction for create entries for each vendor)
thans & regards,
srinivas reddy.

hiii
yes you can call transaction like that..take tcode in that parameter then you can use it in your program with statement like
call transaction (variable)..in background process.
regards
twinkal

Creating Alias for command which contains two piped cmdlet

hi friends
i use powershell 4.0. is it possible to create Alias for cmdlet which is piped to another cmdlet?
i need to use this command frequently:
Get-windowsFeature | select-object name ( to see only "name" column)
i checked & non of the following commands works:
new-alias myalias Get-windowsFeature | select-object name
or
new-alias myalias "Get-windowsFeature | select-object name"
any solution please?
thanks in advanced

You can't do that with an alias, it only works to substitute the name of a cmdlet or function, and takes a string value as it's argument. You can accomplish the same effect with a function, which takes a script block argument:
function myalias {Get-windowsFeature | select-object name}
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "
hi mjolinor
Great guide. really thanks for that. it was exactly what i needed.
best regards

SID 0 for characteristic ZGRP_DIV could not be converted CL_RSDM_READ_MASTER_DATA- _SIDVAL_DIRECT_READ2

Hi
A 2 infocube containing multiprovider based query have following error when I select infoobjects from both infocubes:
SID 0 for characteristic ZGRP_DIV could not be converted CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
An error occurred when getting data from the processor.
>> Row: 29 Inc: LRRK0F00 Prog: SAPLRRK0
ABAP DEBUGGER's screen shot also attached.

Hi
Thanks it works but only one infocube's 50% infoobjects giving this error, Why?
2nd is infoobject A,B & C are common in both InfoCubes but A has unique records only
so the query result have 2 row for each record like following:
A   B                  C           D              E
11 10               ASD   Not Assign     PRN
11 Not Assign ASD   Account         Not Assign
12 20               LHR   Not Assign     CRT
12 Not Assign LHR    Payment       Not Assign
13 30               KHI    Not Assign     SCN
13 Not Assign KHI    Dispatch        Not Assign
How can I resolve it?

I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan

I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan

You didn't buy an 'unlocked' iPhone 3GS - you bought a 'hacked' one.
Updating to iOS 5 removed the hack and the unofficial unlock.
All you can do is try to find out which network the phone is locked to and ask them if they can unlock it properly.
Otherwise, sell it or throw it away and buy an officially unlocked phone from an official source.

Setting bold font for nodes which are not leaf nodes

In JTree, is it possible to set the font for nodes which are not leaf nodes. Can I do this without using custom renderer, or at the most using a DefaultTreeCellRenderer ?
regards,
nirvan

In JTree, is it possible to set the font for nodes which are not leaf nodes. Can I do this without using custom renderer, or at the most using a DefaultTreeCellRenderer ?
regards,
nirvan

BADI for VA01 which are not for internal use ???

Hello Folks,
Im looking for BADIs which are not for internal use for the transaction VA01...
Could anyone send all the BADIS which can be implemented for VA01...
Thanks in advance...
Reddy

Hi there, you are lucky enough because I have found them almost a few days ago:
---------- BADI for VA01 ----------
A1) BADI
BEFORE (choosing any ORDER: ....) :
- BADI_SD_SALES
- BADI_SD_SALES_BASIC
- UKM_R3_ACTIVATE
- BADI_LAYER
- BADI_MATN1
AFTER (choosing ORDER NR - xxxx -) :
- ADDR_PRINTFORM_SHORT
- BADI_SD_SALES_ITEM
- BADI_IBASE_AUTHORITY
- BADI_IBASE_IBCO
- CU_CONFIG_DELEGATION
- CUKO_PLANT_CHANGE
- EHS_DG_002
- SD_COND_ACCESS_A
- BADI_SD_TO_FM
AFTER CHANGING something in all items and shifting to TAB "item detail":
- BADI_SD_DPBP
- CFOP_DET_PREP
- ADJUST_NET_DAYS
- BADI_SD_SALES_ADDON
AFTER CHANGING something again in all items and shifting to TABS:
- CFOP_DET_PREP
AFTER SAVING:
- /SAPSLL/CTRL_SD0A_R3
- QUANTITY_STRUCT_CK
- DYNPRO_EXTENSION_CK
- IBRT_GEN_ADD_IN
- VALUATION_CK
- WORKORDER_UPDATE
- ATP_PUBLISH_RESULTS
- FM_FYC_RECOVERY_POST
- FMAVC_DECO
- GM_POSTING_CONTROL
- BADI_ISPS_GRANT
- DIP_UPDATE_FKDAT
- CACL_CHARACTER_INPUT
- /SAPSLL/CTRL_SD0A_R3
- /SAPSLL/RFC_DEST
- /SAPSLL/CTRL_SD0A_R3
- /SAPSLL/IFEX_SD0A_R3
- /SAPSLL/KMAT
- BADI_SD_UPDATE_PLVAL
- CUX_ADD_IN
- BOM_EXIT
- WORKORDER_EXEC_STEPS
In case you may need them...
---------- USER EXIT for VA01 ----------
A2) USER EXIT for VA01 :
SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
A3) CLASSICAL USER-EXIT per VA01:
--- include MV45AFZZ ---
FORM userexit_delete_document.
FORM userexit_field_modification.
FORM userexit_move_field_to_vbak.
FORM userexit_move_field_to_vbap.
FORM userexit_move_field_to_vbep.
FORM userexit_move_field_to_vbkd.
FORM userexit_number_range USING us_r
FORM userexit_pricing_prepare_tkomk.
FORM userexit_pricing_prepare_tkomp.
FORM userexit_read_document.
FORM userexit_save_document.
FORM userexit_save_document_prepare.
Hope its enough
Denis Mullaraj

Checking the initiality of the fields while creating entries for a table

While creating entries using table maintenance generator(TMG) i need to check the initiality of the fields.Are there any such events?
I know i can go and change in the screen by making it mandatory or by writing a module in the PAI of the screen of table maintenance generator. Both of cases i have to change the TMG which is generated by SAP system. I want to know is there a way to achieve this with out changing the TMG possible events?

hi rahul,
as far as i know, you have to do your initial valifdation in TMG and you have to change your TMG. However, if you have checked the initial flag while defining the field, you will not have initial value for that particular field.... (if the field is key field, by default it is not initial)
hope this helps....
thanks and regards,
tanmaya

Creating an art which is not visible on 'Layer' panel.

Hi all,
Is it possible to create an art which is present on the document but not on the 'Layer' panel(F7)?
My requirement is to create an art which is visible on the document, but could not be seen on the Layer panel and user is not able to select it.
Just like it happens in case of reflection, when we are creating a copy of selected art object, the reflected copy doesn't present on the 'Layer' panel but it is visible on the document and user is not able to select the reflected one, while he can only select the original art.
Any help would be appreciated.
Thanks..

If you want something that is rendered, but not in the layers panel, the only way to do that (that I know of) would be through a Live Effect. Live Effect lets you create art that is drawn, but not part of the art tree. The caveat is that it has to be tied to a piece of artwork that *is* on the artboard. I think you could apply it to the layer group for a layer, but every time anything on the layer changed it would trigger your live effect execution, so make sure its not hard to render!

Create entry for characteristic which is not in aggregation layer

Similar Messages

Maybe you are looking for