Create Excel attachment
I have written code to create an XSL attachment to am email. It does send out the attachment in the correct format but it does not print out all the lines of output. If i have 2 lines in my output table the excel file produced contains only the first line.
I am currently using the FM SO_DOCUMENT_SEND_API1. How do I resolve this issue? Is there another FM that works better?
Thanks
Eliza
Yes, I have the correct terminating condition. Somehow when I change the packing list factor from 255 to 510 it works.
t_packing_list-doc_size = t_packing_list-body_num * 510.
I do not understand why it does not work with
t_packing_list-doc_size = t_packing_list-body_num * 255.
Thanks.
Similar Messages
-
Send an Excel Attachment as mail to a list of recipients
Hello Everyone,
I am trying to send an email with an excel attachment. My code has been activated successfully. But I haven't received any mail.
Kindly help.
My code is as below.
FORM Z_SENDMAIL .
DATA lv_receiver type SOMLRECI1-RECEIVER.
TYPES: BEGIN OF LTS_CHARFINAL,
matnr(18) type c,
maktx(40) type c,
idnlf(35) type c,
ltsnr(6) type c,
werks(4) type c,
ltsbz(20) type c,
ernam(12) type c,
verpr(11) type c,
soh_qty(13) TYPE c,
int_qty(13) TYPE c,
ext_soh(11) TYPE c,
hol_qty(13) TYPE c,
all_qty(13) TYPE c,
bac_qty(13) TYPE c,
ext_ttl(11) TYPE c,
END OF LTS_CHARFINAL.
DATA: WA_CHARFINAL TYPE LTS_CHARFINAL.
lv_receiver = '[email protected]'.
CONCATENATE 'ITEM_TRIM'
'DESCRIPTION'
'VEND_ITEM'
'PLNRCODE'
'LOCATION'
'SITE'
'PLANNER'
'AVERAGE_COST'
'SOH_QTY'
'INTRANS_QTY'
'EXT_COST_SOH'
'HOLD_QTY'
'ALLOC_QTY'
'BACKORD_QTY'
'EXT_COST_TTL_INVEN'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT GIT_FINAL INTO GWA_FINAL.
wa_charfinal-matnr = gwa_final-matnr.
wa_charfinal-maktx = gwa_final-maktx.
wa_charfinal-idnlf = gwa_final-idnlf.
wa_charfinal-ltsnr = gwa_final-ltsnr.
wa_charfinal-werks = gwa_final-werks.
wa_charfinal-ltsbz = gwa_final-ltsbz.
wa_charfinal-ernam = gwa_final-ernam.
wa_charfinal-verpr = gwa_final-verpr.
wa_charfinal-soh_qty = gwa_final-soh_qty.
wa_charfinal-int_qty = gwa_final-int_qty.
wa_charfinal-ext_soh = gwa_final-ext_soh.
wa_charfinal-hol_qty = gwa_final-hol_qty.
wa_charfinal-all_qty = gwa_final-all_qty.
wa_charfinal-bac_qty = gwa_final-bac_qty.
wa_charfinal-ext_ttl = gwa_final-ext_ttl.
CONCATENATE wa_charfinal-matnr
wa_charfinal-maktx
wa_charfinal-idnlf
wa_charfinal-ltsnr
wa_charfinal-werks
wa_charfinal-ltsbz
wa_charfinal-ernam
wa_charfinal-verpr
wa_charfinal-soh_qty
wa_charfinal-int_qty
wa_charfinal-ext_soh
wa_charfinal-hol_qty
wa_charfinal-all_qty
wa_charfinal-bac_qty
wa_charfinal-ext_ttl
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
PERFORM Z_BUILD_MESSAGE.
PERFORM Z_SEND_FILE_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING lv_receiver
'Example .xls documnet attachment'
'XLS'
'filename'
CHANGING GD_ERROR
GD_RECIEVER.
ENDFORM.
FORM Z_BUILD_MESSAGE .
REFRESH IT_MESSAGE.
IT_MESSAGE = 'Please find the attached document'.
APPEND IT_MESSAGE.
ENDFORM. " Z_BUILD_MESSAGE
FORM Z_SEND_FILE_ATTACHMENT TABLES P_IT_MESSAGE
P_IT_ATTACH STRUCTURE IT_ATTACH
USING P_lv_receiver
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_LV_RECEIVER.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
* Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
* Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
* Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = P_IT_ATTACH[].
* Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
* Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
* Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
* Populate zerror return code
LD_ERROR = SY-SUBRC.
* Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM. " Z_SEND_FILE_ATTACHMENT
-Regards
MonicaHi Monica,
Please check with your BASIS team if all the required configurations are there to send mail.
You can check in SOST transaction if you have an entry there for your mail.
Another relevant transaction in SCOT.
Regards,
Santanu. -
How to Create Excel File in Background processing with different colors
HI All
I am trying to create Excel file in background & send it to user through e-mail, this i could acheive using fucntion module SO_DOCUMENT_SEND_API1, but here my requirement is i want to put different colors to columns of excel & this should happen in Background processing,
Initially i completed above requirement by using HTML type of document with attachment type 'ALI' & formatted output using write statement & used colors, after that i took this o/p using save_list function module & then table compress...etc.
but i don't know how to achieve same if we need o/p in excel as size of object of excel file is less than that of HTML
I am thankfull to everybody who will help me.
Regards
LokeshLokesh,
Iam also trying to populate my text file with colors as an attachment . If you know this please let me know. -
Issue while opening Excel attachment send through FM
Hi All,
I had program in which i am sending mail along with Excel attachment using FM SO_NEW_DOCUMENT_ATT_SEND_API1. Mail is going fine with data in Excel attachment. But when i try to open the Excel it gives an Info message saying that "<b>You are trying to open (attachment name),is in different format than specified file extension Verify that file is not corrupted and is from a trusted source before opening file. Do you want to open file now</b>". Then when i presses YES, Excel opens up with all data. I want to know how to avoid that info popup. Is there something has to be passed to FM or something has to be done to Excel like settings in EXCEL so that i can avoid that Info message coming.
Document type of attachment is gw_packing_list-doc_type = 'XLS'.
Thanks in advance,
ShyamHi Shyam,
Have you build your Excel Data table to get attachement in Mail? If no then please find the Eg. code for your reference to send Excel attachment..
* End of Selection Event : Displaying the selected data *
END-OF-SELECTION.
PERFORM EMAIL_EXCEL_ATTACHMENT.
******///form
FORM EMAIL_EXCEL_ATTACHMENT .
* Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
* Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
* Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING S_EMAIL
TEXT-042
C_XLS
'filename'
CHANGING GD_ERROR
GD_RECIEVER.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
ENDFORM. " EMAIL_EXCEL_ATTACHMENT
********///form BUILD_XLS_DATA_TABLE
FORM BUILD_XLS_DATA_TABLE .
DATA : LV_NETWR(20) TYPE C,
LV_BOL_DATE(20) TYPE C,
LV_KAWRT(20) TYPE C,
LV_FKDAT(20) TYPE C,
LV_WAERK(20) TYPE C,
LV_KURRF(20) TYPE C,
LV_SHIPDATE(20) TYPE C,
LV_DEPTDATE(20) TYPE C.
CONSTANTS:
CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF. "#EC *
DATA STR TYPE STRING.
**********/ this parameter concatenate to get headers
CONCATENATE STR
'SLNO'
'OWNER'
'SERIAL NO'
'FROM'
'DESTINATION'
'INVOICE VALUE'
'DESCRIPTION'
'CUSTOMER NAME'
'BL NUMBER'
'BL DATE'
'VESSEL NAME/AIRLINE DETAILS'
'MODE OF TRANSIT'
'SHIPPING MARKS'
'DUTY SUM INSURED'
'FLAG'
'OPEN COVERNO'
'INVOICE DATE'
'INVOICE NO'
'LC WORDING'
'QUANTITY'
'PACKAGING DETAILS'
'BASIS OF VALUATION'
'EXCLUDE WAR SRCC'
'CURRENCY'
'EXCHANGE RATE'
'ADDRESS'
'VESSEL BUILT YEAR'
'VESSEL FLAG'
'VOYAGE NO'
'SHIPMENT DATE'
'DEPARTURE DATE'
'SURVEYOR COUNTRY'
'SURVEYOR CITY'
'SURVEYOR AGENT'
'SURVEYOR ADDRESS'
'EXPORT CONSIGNMENT'
'CONTAINER DETAILS'
CL_ABAP_CHAR_UTILITIES=>CR_LF INTO STR SEPARATED BY CON_TAB.
LOOP AT IT_FINAL.
*******/ this is to pass body / row data
WRITE : IT_FINAL-NETWR TO LV_NETWR, "#EC UOM_IN_MES
IT_FINAL-BOL_DATE TO LV_BOL_DATE,
IT_FINAL-KAWRT TO LV_KAWRT, "#EC UOM_IN_MES
IT_FINAL-FKDAT TO LV_FKDAT,
IT_FINAL-WAERK TO LV_WAERK,
IT_FINAL-KURRF TO LV_KURRF,
IT_FINAL-SHIPDATE TO LV_SHIPDATE,
IT_FINAL-DEPTDATE TO LV_DEPTDATE.
CONCATENATE
STR
IT_FINAL-SLNO
IT_FINAL-OWNER
IT_FINAL-SRNO
IT_FINAL-PORT_LOAD
IT_FINAL-PORT_DSCHR
LV_NETWR
IT_FINAL-DESCRIP
IT_FINAL-CUSTNAME
IT_FINAL-BOL_NUM
LV_BOL_DATE
IT_FINAL-VESSELNAME
IT_FINAL-SHP_TYPE
IT_FINAL-SHP_MARK
LV_KAWRT
IT_FINAL-FLAG
IT_FINAL-OPEN_CONO
LV_FKDAT
IT_FINAL-VBELN
IT_FINAL-LC_WORD
IT_FINAL-QUANT
IT_FINAL-PACKDETL
IT_FINAL-INCO1
IT_FINAL-EXCWSR
LV_WAERK
LV_KURRF
IT_FINAL-ADDPAY
IT_FINAL-VESSBYR
IT_FINAL-VESSFLG
IT_FINAL-VOY_FLY_NO
LV_SHIPDATE
LV_DEPTDATE
IT_FINAL-SURCOUNT
IT_FINAL-INCO2
IT_FINAL-EXPORT_CON
IT_FINAL-SURAGT
IT_FINAL-SURADD
IT_FINAL-CONTRNO
CL_ABAP_CHAR_UTILITIES=>CR_LF INTO STR SEPARATED BY CON_TAB.
ENDLOOP.
CALL FUNCTION 'SCMS_STRING_TO_FTEXT'
EXPORTING
TEXT = STR
TABLES
FTEXT_TAB = IT_ATTACH.
ENDFORM. " BUILD_XLS_DATA_TABLE
******// form POPULATE_EMAIL_MESSAGE_BODY
FORM POPULATE_EMAIL_MESSAGE_BODY .
REFRESH IT_MESSAGE.
IT_MESSAGE = TEXT-043. " Please find attached Insurance Certificate details
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
*******'/ form SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* text
* -->PIT_MESSAGE text
* -->PIT_ATTACH text
* -->P_EMAIL text
* -->P_MTITLE text
* -->P_FORMAT text
* -->P_FILENAME text
* -->P_ATTDESCRIPTION text
* -->P_SENDER_ADDRESS text
* -->P_SENDER_ADDRES_TYPE text
* -->P_ERROR text
* -->P_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER. "#EC *
DATA: LD_ERROR TYPE SY-SUBRC, "#EC *
* LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
* LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC. "#EC *
* ld_email = p_email.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
* Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
* Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
* Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
DESCRIBE TABLE IT_ATTACH LINES W_CNT.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
W_CNT * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
* Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'raw'.
APPEND T_PACKING_LIST.
* Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
* Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
LOOP AT S_EMAIL.
T_RECEIVERS-RECEIVER = S_EMAIL-LOW.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
* Populate zerror return code
LD_ERROR = SY-SUBRC.
* Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*******/form
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* text
* --> p1 text
* <-- p2 text
FORM INITIATE_MAIL_EXECUTE_PROGRAM .
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*********end of code to trigger mail in excel format....
If any other help please let me know......
I am sure this example code will help you to resolve your problem...
please analyse above code for your requirement...
In my scenario the message you said is not displaying.....
<i>Reward Points</i>
Cheers,
Sagun Desai -
To send output of report to the mails ids as an excel attachment
Hi all,
I have a requirement that I have created a report using classes. Now I have to send output of my report to the particular mailids as an excel attachment.
Can anybody help me?
Regards,
Azra.Hi,
Refer Below links.
Re: Formatting Excel Attachment output in SO_DOCUMENT_SEND_API1
Information Broadcasting with Excel Report as attachment
Zip the excel and send as mail attachment
Regards
Md.MaahboobKhan -
Issue in sending e mails with Excel attachment
Hi,
I am facing an issue with one function module - SO_DOCUMENT_SEND_API1. We were using this for sending mails to diff destination with excel sheet attachment contains sales data. This system has been migrated from 4.5B to ECC 5. Now this process is not working like the old one and the excel attachment is not properly formatted. All the data is being written into one cell of excel sheet and it seems only one line is present in output and is corrupted.
Can you please let me know what might be the issue here, any alternate option available or something to be modified in new version with this function module?
Thanks in advance,
UllasHi Ullas,
check this once.
REPORT ZLAXMI_ALVMAIL4 .
TABLES: EKKO.
PARAMETERS: P_EMAIL TYPE SOMLRECI1-RECEIVER
DEFAULT '[email protected]'.
TYPES: BEGIN OF T_EKPO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
END OF T_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF T_EKPO INITIAL SIZE 0,
WA_EKPO TYPE T_EKPO.
TYPES: BEGIN OF T_CHAREKPO,
EBELN(10) TYPE C,
EBELP(5) TYPE C,
AEDAT(8) TYPE C,
MATNR(18) TYPE C,
END OF T_CHAREKPO.
DATA: WA_CHAREKPO TYPE T_CHAREKPO.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1,
GD_ERROR TYPE SY-SUBRC,
GD_RECIEVER TYPE SY-SUBRC.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM DATA_RETRIEVAL.
Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Example .xls documnet attachment'
'XLS'
'filename'
CHANGING GD_ERROR
GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM DATA_RETRIEVAL.
SELECT EBELN EBELP AEDAT MATNR
UP TO 10 ROWS
FROM EKPO
INTO TABLE IT_EKPO.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM BUILD_XLS_DATA_TABLE.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
CONSTANTS:
CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_EKPO INTO WA_CHAREKPO.
CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
FORM POPULATE_EMAIL_MESSAGE_BODY.
REFRESH IT_MESSAGE.
IT_MESSAGE = 'Please find attached a list test ekpo records'.
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
Regards,
Laxmi. -
Problem in excel format while sending mail with excel attachment.
Hi Gurus ,
I am sending a email with Excel attachment using FM SO_DOCUMENT_SEND_API1 or SO_NEW_DOCUMENT_ATT_SEND_API1.
I am able to send a mail with excel attachment with a piece of code which I got from SDN itself.
But the problem is when I am trying to open the attachment, <b>A pop up comes which says that it is not in recognizable format. Would you like to open it?
and several other lines of caution.</b>
When i choose to open it, i get the correct data in one excel sheet. Certain vertical lines of the excel sheet is missing. <b>But no data is missing. </b>
I am attaching the code below. Can any one please tell me where is the problem in this code ?
Thanx in advance
types: begin of t_mara,
matnr type mara-matnr,
matkl type mara-matkl,
mtart type mara-mtart,
meins type mara-meins,
end of t_mara.
data: gt_mara type table of t_mara,
wa_mara like line of gt_mara,
it_packing_list type table of SOPCKLSTI1,
wa_packing_list like line of it_packing_list,
it_receivers type table of SOMLRECI1,
wa_receivers like line of it_receivers,
it_mailbody type table of SOLISTI1,
wa_mailbody like line of it_mailbody,
it_attachment type table of SOLISTI1,
wa_attachment like line of it_attachment.
data: la_doc type SODOCCHGI1.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
* get material
select matnr matkl mtart meins
into table gt_mara
from mara
up to 25 rows.
* Populate the subject/generic message attributes
la_doc-obj_langu = sy-langu.
la_doc-obj_descr = 'Material Details' . "Mail Header
la_doc-sensitivty = 'F'.
la_doc-doc_size = 1.
* Add the recipients email address
CLEAR wa_receivers.
REFRESH it_receivers.
wa_receivers-receiver = 'PCSDEVL'.
wa_receivers-rec_type = 'U'.
wa_receivers-com_type = 'INT'.
wa_receivers-notif_del = 'X'.
wa_receivers-notif_ndel = 'X'.
APPEND wa_receivers to it_receivers.
* Mail Body
CLEAR wa_mailbody.
REFRESH it_mailbody.
wa_mailbody-line = 'Please find the attachment'.
APPEND wa_mailbody to it_mailbody.
* Mail attachmwnt
CLEAR wa_attachment.
REFRESH it_attachment.
CONCATENATE 'MATNR' 'MATKL' 'MTART' 'MEINS'
INTO wa_attachment SEPARATED BY con_tab.
CONCATENATE con_cret wa_attachment INTO wa_attachment.
APPEND wa_attachment to it_attachment.
LOOP AT gt_mara INTO wa_mara.
CONCATENATE wa_mara-matnr wa_mara-matkl
wa_mara-mtart wa_mara-meins
INTO wa_attachment SEPARATED BY con_tab.
CONCATENATE con_cret wa_attachment INTO wa_attachment.
APPEND wa_attachment to it_attachment.
ENDLOOP.
* Describe the body of the message
CLEAR wa_packing_list.
REFRESH it_packing_list.
wa_packing_list-transf_bin = space.
wa_packing_list-head_start = 1.
wa_packing_list-head_num = 0.
wa_packing_list-body_start = 1.
wa_packing_list-body_num = 1.
wa_packing_list-doc_type = 'RAW'.
APPEND wa_packing_list to it_packing_list.
* Create attachment notification
wa_packing_list-transf_bin = 'X'.
wa_packing_list-head_start = 1.
wa_packing_list-head_num = 1.
wa_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES wa_packing_list-body_num.
wa_packing_list-doc_type = 'XLS'. " To word attachment change this as 'DOC'
wa_packing_list-obj_descr = ' '.
concatenate wa_packing_list-doc_type 'file' into wa_packing_list-OBJ_DESCR
separated by space.
wa_packing_list-doc_size = wa_packing_list-body_num * 255.
APPEND wa_packing_list to it_packing_list.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = la_doc
PUT_IN_OUTBOX = 'X'
* SENDER_ADDRESS = SY-UNAME
* SENDER_ADDRESS_TYPE = 'B'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
* SENDER_ID =
tables
packing_list = it_packing_list
* OBJECT_HEADER =
CONTENTS_BIN = it_attachment
CONTENTS_TXT = it_mailbody
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
receivers = it_receivers
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.REPORT Zex5 LINE-SIZE 255 LINE-COUNT 255 .
class CL_ABAP_CHAR_UTILITIES definition load. "-->
TABLES : vbap.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln.
DATA : BEGIN OF itab OCCURS 1,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
matnr LIKE vbap-matnr,
END OF itab.
parameters : p_email like somlreci1-receiver
DATA: tlines type i.
DATA: itmessage LIKE solisti1 OCCURS 1 WITH HEADER LINE. "Ok
DATA: itattach LIKE solisti1 OCCURS 2 WITH HEADER LINE. "Ok
DATA: itpacklist LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: itreclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
data: itattachment like solisti1 OCCURS 2 WITH HEADER LINE.
start-of-selection.
SELECT vbeln posnr matnr
FROM vbap
INTO TABLE itab
WHERE vbeln IN s_vbeln.
**Make the internal table data to be compatible in excel format .
PERFORM BUILD_XLS_FORMAT.
**Populate message of body text.
clear itmessage.
refresh itmessage.
itmessage = 'Please find attached Excel file'.
append itmessage.
PERFORM send_mail_as_xls_attachment tables itmessage
itattach
using p_email 'Excel Attachment' 'TXT' " 'XLS'
using p_email 'TEXT Attachment' 'TXT' " 'XLS'
'TestFileName'
'SalesOrders' .
*& Form BUILD_XLS_FORMAT
text
--> p1 text
<-- p2 text
form BUILD_XLS_FORMAT.
previosuly we were using for unicode ..now replaced
**Declare constants for the spacing .
*Constants : con1 type x value '0D',
con2 type x value '09'.
Constants : con1 type c
value CL_ABAP_CHAR_UTILITIES=>CR_LF,
con2 type c
value CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
**For the Header descriptions.
Concatenate 'SalesORdNo'
'Item'
'Materialno' into itattach separated by con2.
Concatenate con1 itattach into itattach.
Append itattach.
**Now align the items in the itab as above .
Loop at Itab.
concatenate itab-vbeln
itab-posnr
itab-matnr into itattach separated by con2.
concatenate con1 itattach into itattach .
Append itattach.
endloop.
endform. " BUILD_XLS_FORMAT
*& Form send_mail_as_xls_attachment
text
-->P_ITMESSAGE text
-->P_ITATTACH text
-->P_P_EMAIL text
-->P_0116 text
-->P_0117 text
-->P_0118 text
-->P_0119 text
form send_mail_as_xls_attachment tables p_itmessage
p_itattach
using p_email
p_mtitle
p_format
p_filename
p_attdescription.
Data : xdocdata like sodocchgi1,
xcnt type i.
*Fill the document data.
xdocdata-doc_size = 1.
*Populate the subject/generic message attributes.
xdocdata-obj_name = 'SAPRPT'.
xdocdata-obj_langu = sy-langu.
xdocdata-obj_descr = p_mtitle.
*Fill the document data and fetch size of attachment.
clear xdocdata.
read table itattach index xcnt.
xdocdata-doc_size = ( xcnt - 1 ) * 255 + strlen( itattach ).
xdocdata-doc_size = ( xcnt - 1 ) * 255.
xdocdata-obj_name = 'SAPRPT'.
xdocdata-obj_langu = sy-langu.
xdocdata-obj_descr = p_mtitle.
clear itattachment. refresh itattachment.
itattachment[] = p_itattach[].
*Describe the body of the message.
clear itpacklist. refresh itpacklist.
itpacklist-transf_bin = 'X'.
itpacklist-head_start = '1'.
itpacklist-head_num = '0'.
itpacklist-body_start = '1'.
describe table itattachment lines itpacklist-body_num .
itpacklist-doc_type = 'TXT'.
itpacklist-doc_type = 'XLS'.
append itpacklist.
*Create attachment notification.
itpacklist-transf_bin = 'X'.
itpacklist-head_start = '1'.
itpacklist-head_num = '1'.
itpacklist-body_start = '1'.
describe table itattachment lines itpacklist-body_num .
itpacklist-doc_type = p_format.
itpacklist-obj_name = p_filename.
itpacklist-obj_descr = p_attdescription.
itpacklist-doc_size = itpacklist-body_num * 255 .
append itpacklist.
*FIll the receivers list.
Clear itreclist. refresh itreclist.
itreclist-receiver = p_email.
itreclist-rec_type = 'U'.
itreclist-com_type = 'INT'.
itreclist-notif_del = 'X'.
itreclist-notif_ndel = 'X'.
*itreclist-notif_read = 'X'.
append itreclist.
*CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = xdocdata
PUT_IN_OUTBOX = 'X'
commit_work = 'X'
SENDER_ADDRESS = SY-UNAME
tables
packing_list = itpacklist
CONTENTS_BIN = itattachment
CONTENTS_TXT = itmessage
receivers = itreclist
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = xdocdata
PUT_IN_OUTBOX = 'X'
TABLES
packing_list = itpacklist
CONTENTS_BIN = itattachment
CONTENTS_TXT = itmessage
receivers = itreclist
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " send_mail_as_xls_attachment
Just execute the above code and let me know.
What is the sap version u r using .
Vijay -
Sending mail with excel attachment-improper format
Dear experts,
I am sending a mail to outlook with an excel attachment. The mail is sent with attachment and the data, but all in one cell.
I am using SO_NEW_DOCUMENT_ATT_SEND_API1. What parameters do i need to manipulate to have data in different columns of excel? I am using "packing_list" table of FM. But dont know the exact parameters to be passed. Can anyone help with the same please?
Best regards and thanks!
Sumit Nene.Hello Sumit,
I am using same function module to send mail with excel attachment.
Below I am attaching my own code for your reference.
Data which u want to add in excel file is maintain in IT_OBJBIN i.e. document information.
CLEAR :IMESSAGE,IT_OBJBIN,IT_OBJPACK,IT_RECLIST.
REFRESH: IMESSAGE[ ] , IT_OBJBIN[ ] , IT_OBJPACK[ ] , IT_RECLIST[ ].
" populate the text for body of the mail
CLEAR WA_IMESSAGE.
CONCATENATE 'Board : ' P_BOARD ':' 'Please find the excel attached for the list of Material whose routing is created' INTO WA_IMESSAGE-LINE.
APPEND WA_IMESSAGE TO IMESSAGE.
"document information
W_DOC_CHNG-OBJ_NAME = 'Excel'.
IF NOT P_BOARD IS INITIAL.
CONCATENATE 'Board : ' P_BOARD ':' 'List Of Routing Materials' INTO W_DOC_CHNG-OBJ_DESCR.
ELSE.
CONCATENATE 'List Of' ' Routing Materials' INTO W_DOC_CHNG-OBJ_DESCR.
ENDIF.
W_DOC_CHNG-SENSITIVTY = 'F'. " ->Functional object
" displaying material , plant in the excel
CONCATENATE 'BOARD NO : ' P_BOARD INTO WA_OBJBIN.
APPEND WA_OBJBIN TO IT_OBJBIN.
CONCATENATE 'MATERIAL' 'PLANT' 'DESCRIPTION' INTO WA_OBJBIN SEPARATED BY C_TAB.
CONCATENATE C_RET WA_OBJBIN INTO WA_OBJBIN.
APPEND WA_OBJBIN TO IT_OBJBIN.
CLEAR : WA_OBJBIN.
LOOP AT IT_DOWNLOAD INTO WA_DOWNLOAD. "It_orders is the internal table to be transferred to excel
CONCATENATE WA_DOWNLOAD-MATNR WA_DOWNLOAD-WERKS WA_DOWNLOAD-DESC INTO WA_OBJBIN SEPARATED BY C_TAB.
CONCATENATE C_RET WA_OBJBIN INTO WA_OBJBIN.
APPEND WA_OBJBIN TO IT_OBJBIN.
ENDLOOP.
DESCRIBE TABLE IT_OBJBIN LINES V_LINES_BIN. " no of lines for excel data
" pack the data as RAW
CLEAR WA_IT_OBJPACK-TRANSF_BIN. "Obj. to be transported not in binary form
WA_IT_OBJPACK-HEAD_START = 1. "Start line of object header in transport packet
WA_IT_OBJPACK-HEAD_NUM = 0. "Number of lines of an object header in object packet
WA_IT_OBJPACK-BODY_START = 1. "Start line of object contents in an object packet
WA_IT_OBJPACK-BODY_NUM = MESSAGE_LINES. "Number of lines of the mail body
WA_IT_OBJPACK-DOC_TYPE = 'RAW'.
APPEND WA_IT_OBJPACK TO IT_OBJPACK.
" pack the data as excel
WA_IT_OBJPACK-TRANSF_BIN = 'X'.
WA_IT_OBJPACK-HEAD_START = 1.
WA_IT_OBJPACK-HEAD_NUM = 1.
WA_IT_OBJPACK-BODY_START = 1.
WA_IT_OBJPACK-BODY_NUM = V_LINES_BIN. "no of lines of it_orders to give no of unprocessed orders
WA_IT_OBJPACK-DOC_TYPE = 'XLS'. " -> excel fomat
WA_IT_OBJPACK-OBJ_NAME = 'EXCEL ATTACHMENT'.
" attachment name
IF NOT P_BOARD IS INITIAL.
CONCATENATE P_BOARD '.XLS' INTO WA_IT_OBJPACK-OBJ_DESCR.
ELSE.
CONCATENATE 'LIST' '.XLS' INTO WA_IT_OBJPACK-OBJ_DESCR.
ENDIF.
WA_IT_OBJPACK-DOC_SIZE = V_LINES_BIN * 255.
APPEND WA_IT_OBJPACK TO IT_OBJPACK.
" creating email id
DATA: STR1 TYPE STRING,
STR2 TYPE STRING,
STR3 TYPE STRING,
ITAB TYPE TABLE OF STRING.
DATA : WA_I LIKE LINE OF ITAB.
SPLIT P_EMAIL AT ',' INTO: TABLE ITAB.
e-mail receivers.
CLEAR WA_IT_RECLIST.
LOOP AT ITAB INTO WA_I.
WA_IT_RECLIST-RECEIVER = WA_I.
WA_IT_RECLIST-RECEIVER = V_MAILADDR.
WA_IT_RECLIST-EXPRESS = 'X'.
WA_IT_RECLIST-REC_TYPE = 'U'. "-> Internet address
APPEND WA_IT_RECLIST TO IT_RECLIST.
CLEAR WA_IT_RECLIST.
ENDLOOP.
" sending mail
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
PACKING_LIST = IT_OBJPACK
OBJECT_HEADER =
CONTENTS_BIN = IT_OBJBIN
CONTENTS_TXT = IMESSAGE
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
RECEIVERS = IT_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
COMMIT WORK.
IF SY-SUBRC = 0.
MESSAGE I001 WITH 'Routing is Created for Board' P_BOARD 'and Mail send on e-mail id :' P_EMAIL.
ENDIF. -
Sending mail with excel attachment
Hi
I need to send my a mail thru pl/sql procedure wit h an excel attachment
I used the elow code. when trying to open the excel getting error in it .
can anyone help out
create or replace PROCEDURE send_mail_not IS
v_mailConn utl_smtp.connection;
v_err VARCHAR2(1000);
v_message VARCHAR2(3000);
crlf VARCHAR2(2) := CHR(13) || CHR(10);
v_attachment varchar2(200);
p_from_mail_id varchar2(200);
p_to_mail_id varchar2(200);
p_subject varchar2(200);
BEGIN
p_from_mail_id:= '[email protected]';
p_to_mail_id :='[email protected]';
p_subject :='error msg';
v_attachment :='erer';
v_mailconn := utl_smtp.open_connection('localhost', 25);
utl_smtp.helo(v_mailconn, 'localhost');
utl_smtp.mail(v_mailconn, '[email protected]');
utl_smtp.rcpt(v_mailconn, '[email protected]');
v_message := 'dfdfjkdflkdmf';
dbms_output.put_line('Inside email procedure');
v_message := 'Date: ' || TO_CHAR(SYSDATE, 'dd Mon yy hh24:mi:ss') || crlf ||
'From: ' || p_from_mail_id || crlf || 'To: ' || '<' ||
p_to_mail_id || '>' || crlf || 'Subject: ' ||
p_subject || crlf ||
'MIME-Version: 1.0'|| utl_tcp.crlf || -- use Mime mail standard
'Content-Type: multipart/mixed;' || utl_tcp.crlf ||
' boundary="-----SECBOUND"'|| utl_tcp.crlf ||
'-------SECBOUND'|| utl_tcp.crlf ||
'Content-Type: text/html;'|| utl_tcp.crlf ||
'Content-Transfer_Encoding: 8bit'|| utl_tcp.crlf ||
utl_tcp.crlf ||
v_message || utl_tcp.crlf || -- message body
utl_tcp.crlf ||
utl_tcp.crlf ||
'-------SECBOUND'|| utl_tcp.crlf ||
'Content-Type: text/plain;' || utl_tcp.crlf ||
' name="errr.log"'|| utl_tcp.crlf || -- file name that will hold the attached text
'Content-Transfer_Encoding: 8bit'|| utl_tcp.crlf ||
'Content-Disposition: attachment;'|| utl_tcp.crlf ||
' filename="error.xls"'|| utl_tcp.crlf ||
utl_tcp.crlf ||
v_attachment || utl_tcp.crlf || -- attachment
utl_tcp.crlf ||
'-------SECBOUND--' -- end mime mail
utl_smtp.data(v_mailconn, v_message);
utl_smtp.quit(v_mailconn);
dbms_output.put_line('v_message');
EXCEPTION
WHEN OTHERS THEN
v_err := sqlerrm;
insert into pas.temp_trg values ('mail2', v_err, '');
END send_mail_not;Your code had some syntactic errors... can you please try the below.. not tested.
please let me know...
CREATE OR REPLACE PROCEDURE send_mail_not
IS
v_mailconn UTL_SMTP.connection;
v_err VARCHAR2 (1000);
v_message VARCHAR2 (3000);
crlf VARCHAR2 (2) := CHR (13) || CHR (10);
v_attachment VARCHAR2 (200);
p_from_mail_id VARCHAR2 (200);
p_to_mail_id VARCHAR2 (200);
p_subject VARCHAR2 (200);
BEGIN
p_from_mail_id := '[email protected]';
p_to_mail_id := '[email protected]';
p_subject := 'error msg';
v_attachment := 'erer';
v_mailconn := UTL_SMTP.open_connection ('localhost', 25);
UTL_SMTP.helo (v_mailconn, 'localhost');
UTL_SMTP.mail (v_mailconn, '[email protected]');
UTL_SMTP.rcpt (v_mailconn, '[email protected]');
v_message := 'dfdfjkdflkdmf';
DBMS_OUTPUT.put_line ('Inside email procedure');
v_message :=
'Date: '
|| TO_CHAR (SYSDATE, 'dd Mon yy hh24:mi:ss')
|| crlf
|| 'From: '
|| p_from_mail_id
|| crlf
|| 'Subject: '
|| p_subject
|| crlf
|| 'To: '
|| p_to_mail_id
|| crlf
|| 'Mime-version: 1.0'
|| UTL_TCP.crlf
|| -- use Mime mail standard
'Content-type: multipart/mixed;'
|| UTL_TCP.crlf
|| 'boundary="-----SECBOUND"'
|| UTL_TCP.crlf
|| '-------SECBOUND'
|| UTL_TCP.crlf
|| 'Content-Type: text/html;'
|| UTL_TCP.crlf
|| 'Content-Transfer_Encoding: 8bit'
|| UTL_TCP.crlf
|| UTL_TCP.crlf
|| v_message
|| UTL_TCP.crlf
|| -- message body
UTL_TCP.crlf
|| UTL_TCP.crlf
|| '-------SECBOUND'
|| UTL_TCP.crlf
|| 'Content-Type: text/plain;'
|| UTL_TCP.crlf
|| ' name="errr.log"'
|| UTL_TCP.crlf
|| -- file name that will hold the attached text
'Content-Transfer_Encoding: 8bit'
|| UTL_TCP.crlf
|| 'Content-Disposition: attachment;'
|| UTL_TCP.crlf
|| ' filename="error.xls"'
|| UTL_TCP.crlf
|| UTL_TCP.crlf
|| v_attachment
|| UTL_TCP.crlf
|| -- attachment
UTL_TCP.crlf
|| '-------SECBOUND--' -- end mime mail
UTL_SMTP.write_data (v_mailconn, v_message);
UTL_SMTP.close_data (v_mailconn);
UTL_SMTP.quit (v_mailconn);
DBMS_OUTPUT.put_line ('v_message');
EXCEPTION
WHEN OTHERS
THEN
v_err := SQLERRM;
INSERT INTO pas.temp_trg
VALUES ('mail2', v_err, '');
END send_mail_not; -
Excel attachment contains only 1st row of Internal Table.
Hello,
I have designed a Vendor Ledger report and want to send the same as an excel attachment. I have made use of function module SO_NEW_DOCUMENT_ATT_SEND_API1 wherein I pass the parameters.
The program works perfectly fine as I am receiving email along with the excel attachment. Also, the excel attachment opens without any errors. Also, the alignment of columns and data is perfect.
But the problem is if my internal table is having 10 rows, I get only the first row of the internal table in the excel sheet.
I also put a break point just before calling the function module to send email, I could see that the internal table which contains the attachment is having all 10 rows.
I really don't know what's going wrong in this.
Request you to please help.
Regards,
Danish.Hi,
Hi this is my code. Also, one thing I found that if i remove the Report Name i.e. "Vendor Ledger" , I get more than 1 row in my excel sheet. I feel there is some problem with the document size attributes.
* Header for exception report
CONCATENATE 'CC' 'Vendor' 'Stat' 'Name' 'Doc.No' 'FY' 'DDate' 'PDate'
'AssNo.' 'Doc.Tp' 'G/L' 'LAmt' 'LCurr' 'DAmt'
'D/C' 'Cl.Doc' 'TaxCd' 'TaxAmt'
INTO it_attachment SEPARATED BY
cl_abap_char_utilities=>horizontal_tab.
CONCATENATE cl_abap_char_utilities=>cr_lf it_attachment INTO it_attachment.
APPEND it_attachment.
* Split Internal table data using horizontal tab.
CLEAR it_main.
LOOP AT it_main.
CLEAR: lc_amt, dc_amt, tax_amt.
lc_amt = it_main-lc_amount.
dc_amt = it_main-amt_doccur.
tax_amt = it_main-w_tax_base.
CONCATENATE it_main-comp_code
it_main-vendor
it_main-status
it_main-name1
it_main-doc_no
it_main-fisc_year
it_main-doc_date
it_main-pstng_date
it_main-alloc_nmbr
it_main-doc_type
it_main-sp_gl_ind
lc_amt
it_main-loc_currcy
dc_amt
it_main-db_cr_ind
it_main-clr_doc_no
it_main-w_tax_code
tax_amt
INTO it_attachment SEPARATED BY
cl_abap_char_utilities=>horizontal_tab.
CONCATENATE cl_abap_char_utilities=>cr_lf it_attachment INTO it_attachment.
APPEND it_attachment.
ENDLOOP.
* Create Mail Body and Attachment.
psubject = 'Vendor Ledger'.
lv_message = 'Dear Sir/Madam,'.
APPEND lv_message TO it_message.
lv_message = ' '.
APPEND lv_message TO it_message.
lv_message = 'Attachment contain Vendor Ledger for Testing.'.
APPEND lv_message TO it_message.
lv_message = ' '.
APPEND lv_message TO it_message.
lv_message = ' '.
APPEND lv_message TO it_message.
lv_message = 'This is a System Generated Mail. Please do not reply.'.
APPEND lv_message TO it_message.
**Perform for populating mail characteristic info
CLEAR gd_doc_data.
* Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
READ TABLE it_attachment INDEX w_cnt.
gd_doc_data-doc_size = 1.
gd_doc_data-obj_name = 'Danish'. "'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
* Describe the body of the message
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES it_packing_list-body_num.
it_packing_list-doc_size = it_packing_list-body_num * 255.
it_packing_list-doc_type = 'RAW'.
APPEND it_packing_list.
**Describe the attachment info
CLEAR it_packing_list.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type = 'XLS'.
it_packing_list-obj_name = 'File'.
it_packing_list-obj_descr = 'File'.
it_packing_list-doc_size = it_packing_list-body_num * 255.
APPEND it_packing_list.
REFRESH it_receivers.
CLEAR it_receivers.
it_receivers-receiver = 'Email Address'.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
APPEND it_receivers.
**Function Module to send mail
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = gd_doc_data
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_packing_list
contents_bin = it_attachment
contents_txt = it_message
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Regards,
Danish. -
Sending Excel attachment in E-mail
Hi All,
I am sending excel attachment in mail, when I see in SO01 tcode I am able to see the attachment in outbox, but getting 'Error during send Process' in sent status and not getting any mails to my e-mail id.
Could you any one help me in this?
Thanks in advance.
Vijaya.Hi,
data: p_email type somlreci1-receiver
value 'Mail ID'.
data: begin of it001 occurs 0,
bukrs type t001-bukrs,
butxt type t001-butxt,
end of it001.
data: imessage type standard table of solisti1 with header line,
iattach type standard table of solisti1 with header line,
ipacking_list like sopcklsti1 occurs 0 with header line,
ireceivers like somlreci1 occurs 0 with header line,
iattachment like solisti1 occurs 0 with header line.
start-of-selection.
select bukrs butxt into table it001 from t001.
Populate table with detaisl to be entered into .xls file
perform build_xls_data .
Populate message body text
clear imessage. refresh imessage.
imessage = 'Please find attached excel file'.
append imessage.
Send file by email as .xls speadsheet
perform send_email_with_xls tables imessage
iattach
using p_email
'Example Excel Attachment'
'XLS'
'TestFileName'
'CompanyCodes'.
Form BUILD_XLS_DATA
form build_xls_data .
constants: con_cret type x value '0D', "OK for non Unicode
con_tab type x value '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>horizontal_tab,
con_cret type c value cl_abap_char_utilities=>cr_lf.
concatenate 'BUKRS' 'BUTXT'
into iattach separated by con_tab.
concatenate con_cret iattach into iattach.
append iattach.
loop at it001 .
concatenate it001-bukrs it001-butxt
into iattach separated by con_tab.
concatenate con_cret iattach into iattach.
append iattach.
endloop .
endform.
Form SEND_EMAIL_WITH_XLS
form send_email_with_xls tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription.
data: xdocdata like sodocchgi1,
xcnt type i.
Fill the document data.
xdocdata-doc_size = 1.
Populate the subject/generic message attributes
xdocdata-obj_langu = sy-langu .
xdocdata-obj_name = 'SAPRPT' .
xdocdata-obj_descr = p_mtitle .
Fill the document data and get size of attachment
clear xdocdata.
read table iattach index xcnt.
xdocdata-doc_size =
( xcnt - 1 ) * 255 + strlen( iattach ).
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle.
clear iattachment. refresh iattachment.
iattachment[] = pit_attach[].
Describe the body of the message
clear ipacking_list. refresh ipacking_list.
ipacking_list-transf_bin = space.
ipacking_list-head_start = 1.
ipacking_list-head_num = 0.
ipacking_list-body_start = 1.
describe table imessage lines ipacking_list-body_num.
ipacking_list-doc_type = 'RAW'.
append ipacking_list.
Create attachment notification
ipacking_list-transf_bin = 'X'.
ipacking_list-head_start = 1.
ipacking_list-head_num = 1.
ipacking_list-body_start = 1.
describe table iattachment lines ipacking_list-body_num.
ipacking_list-doc_type = p_format.
ipacking_list-obj_descr = p_attdescription.
ipacking_list-obj_name = p_filename.
ipacking_list-doc_size = ipacking_list-body_num * 255.
append ipacking_list.
Add the recipients email address
clear ireceivers. refresh ireceivers.
ireceivers-receiver = p_email.
ireceivers-rec_type = 'U'.
ireceivers-com_type = 'INT'.
ireceivers-notif_del = 'X'.
ireceivers-notif_ndel = 'X'.
append ireceivers.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = xdocdata
put_in_outbox = 'X'
commit_work = 'X'
tables
packing_list = ipacking_list
contents_bin = iattachment
contents_txt = imessage
receivers = ireceivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
endform.
Check this Sample code.
Thanks,
Durai.V -
Hi,
My requiremnt is to attach an excel file in the e-mail which will be triggered through an output type while saving the RFQ document.
This excel attachment will have the item details. And some of the columns in the excel attachment needs to be protected(Non editable mode) and the structure also be protected
Please help me out in this.this is a simple example for sending the excel with attachment..
REPORT ZMAIL.
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver .
(here give the email id)
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
data: ld_store(50) type c. "Leading zeros
CONSTANTS: con_cret(5) TYPE c VALUE '0D', "OK for non Unicode
con_tab(5) TYPE c VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR' INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
*Modification to retain leading zeros
inserts code for excell REPLACE command into ld_store
=REPLACE("00100",1,5,"00100")
concatenate '=REPLACE("' wa_charekpo-ebelp '",1,5,"'
wa_charekpo-ebelp '")' into ld_store .
concatenate ld_store into .xls file instead of actual value(ebelp)
CONCATENATE wa_charekpo-ebeln ld_store wa_charekpo-aedat wa_charekpo-matnr INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
regards,
venkat -
Hi all,
I have an issue in sending mail as an excel attachment .
i am getting some records in the excel sheet as single line and some are coming correctly. here is the sample code.
ie. some records coming line by line, but some record for eg the 6th and 7th record is coming in the 6th line only .here is the coding part for that
CONCATENATE ' '
I_SHIP_HEAD-TKNUM
L_DATEB
VD
I_SHIP_HEAD-EXTI1
I_SHIP_HEAD-TPBEZ
I_SHIP_HEAD-SIGNI
I_SHIP_HEAD-EXTI2
L_NETWR
L_DMBTR
I_SHIP_HEAD-TNDR_TRKID
MODE
L_ALLOWED_TWGT
I_INV-VBELN
L_INVDAT
I_INV-VSTEL
I_INV-KUNRG
L_ETADATE
I_INV-SPART
I_INV-MATNR
I_INV-ARKTX
I_INV-MATKL
L_FKIMG
L_WT
L_VOL
L_DIFFVAL
CON_CRET
INTO I_BIN SEPARATED BY CON_TAB.
APPEND I_BIN .
CLEAR I_BIN.
suggest me a solution.
Thanks & Regards
Magesh AnandanHi,
check the following sample program and also its easy to understand.
REPORT zvenkat_mail_xls_attach.
" Data retrieval related declarations
TYPES:
BEGIN OF t_emp_dat,
pernr TYPE pa0001-pernr,
persg TYPE pa0001-persg,
persk TYPE pa0001-persk,
plans TYPE pa0001-plans,
stell TYPE pa0001-stell,
END OF t_emp_dat.
DATA:
w_emp_data TYPE t_emp_dat.
DATA:
i_emp_data TYPE STANDARD TABLE OF t_emp_dat.
" Mail related declarations
"Variables
DATA :
g_sent_to_all TYPE sonv-flag,
g_tab_lines TYPE i.
"Types
TYPES:
t_document_data TYPE sodocchgi1,
t_packing_list TYPE sopcklsti1,
t_attachment TYPE solisti1,
t_body_msg TYPE solisti1,
t_receivers TYPE somlreci1.
"Workareas
DATA :
w_document_data TYPE t_document_data,
w_packing_list TYPE t_packing_list,
w_attachment TYPE t_attachment,
w_body_msg TYPE t_body_msg,
w_receivers TYPE t_receivers.
"Internal Tables
DATA :
i_document_data TYPE STANDARD TABLE OF t_document_data,
i_packing_list TYPE STANDARD TABLE OF t_packing_list,
i_attachment TYPE STANDARD TABLE OF t_attachment,
i_body_msg TYPE STANDARD TABLE OF t_body_msg,
i_receivers TYPE STANDARD TABLE OF t_receivers.
"Start-of-selection.
START-OF-SELECTION.
PERFORM get_data.
PERFORM build_xls_data_table.
"End-of-selection.
END-OF-SELECTION.
PERFORM send_mail.
"Form get_data from PA0001
FORM get_data.
SELECT pernr
persg
persk
plans
stell
FROM pa0001
INTO CORRESPONDING FIELDS OF TABLE i_emp_data
UP TO 4 ROWS.
ENDFORM. " get_data
"Form build_xls_data_table
FORM build_xls_data_table.
"If you have Unicode check active in program attributes then
"you will need to declare constants as follows.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS:
con_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab,
con_cret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
CONCATENATE 'PERNR' 'PERSG' 'PERSK' 'PLANS' 'STELL'
INTO w_attachment
SEPARATED BY con_tab.
CONCATENATE con_cret
w_attachment
INTO w_attachment.
APPEND w_attachment TO i_attachment.
CLEAR w_attachment.
LOOP AT i_emp_data INTO w_emp_data.
CONCATENATE w_emp_data-pernr
w_emp_data-persg
w_emp_data-persk
w_emp_data-plans
w_emp_data-stell
INTO w_attachment
SEPARATED BY con_tab.
CONCATENATE con_cret w_attachment
INTO w_attachment.
APPEND w_attachment TO i_attachment.
CLEAR w_attachment.
ENDLOOP.
ENDFORM. "build_xls_data_table
"Form send_mail
"PACKING LIST
"This table requires information about how the data in the
"tables OBJECT_HEADER, CONTENTS_BIN and CONTENTS_TXT are to
"be distributed to the documents and its attachments.The first
"row is for the document, the following rows are each for one
"attachment.
FORM send_mail .
"Subject of the mail.
w_document_data-obj_name = 'MAIL_TO_HEAD'.
w_document_data-obj_descr = 'Regarding Mail Program by SAP ABAP'.
"Body of the mail
PERFORM build_body_of_mail
USING:space,
'Hi,',
'I am fine. How are you? How are you doing ? ',
'This program has been created to send simple mail',
'with Subject,Body with Address of the sender. ',
'Regards,',
'Venkat.O,',
'SAP HR Technical Consultant.'.
"Write Packing List for Body
DESCRIBE TABLE i_body_msg LINES g_tab_lines.
w_packing_list-head_start = 1.
w_packing_list-head_num = 0.
w_packing_list-body_start = 1.
w_packing_list-body_num = g_tab_lines.
w_packing_list-doc_type = 'RAW'.
APPEND w_packing_list TO i_packing_list.
CLEAR w_packing_list.
"Write Packing List for Attachment
w_packing_list-transf_bin = 'X'.
w_packing_list-head_start = 1.
w_packing_list-head_num = 1.
w_packing_list-body_start = 1.
DESCRIBE TABLE i_attachment LINES w_packing_list-body_num.
w_packing_list-doc_type = 'XLS'.
w_packing_list-obj_descr = 'Excell Attachment'.
w_packing_list-obj_name = 'XLS_ATTACHMENT'.
w_packing_list-doc_size = w_packing_list-body_num * 255.
APPEND w_packing_list TO i_packing_list.
CLEAR w_packing_list.
"Fill the document data and get size of attachment
w_document_data-obj_langu = sy-langu.
READ TABLE i_attachment INTO w_attachment INDEX g_tab_lines.
w_document_data-doc_size = ( g_tab_lines - 1 ) * 255 + STRLEN(
w_attachment ).
"Receivers List.
w_receivers-rec_type = 'U'. "Internet address
w_receivers-receiver = '[email protected]'.
w_receivers-com_type = 'INT'.
w_receivers-notif_del = 'X'.
w_receivers-notif_ndel = 'X'.
APPEND w_receivers TO i_receivers .
CLEAR:w_receivers.
"Function module to send mail to Recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_document_data
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = g_sent_to_all
TABLES
packing_list = i_packing_list
contents_bin = i_attachment
contents_txt = i_body_msg
receivers = i_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0 .
MESSAGE i303(me) WITH 'Mail has been Successfully Sent.'.
ELSE.
WAIT UP TO 2 SECONDS.
"This program starts the SAPconnect send process.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ENDFORM. " send_mail
" Form build_body_of_mail
FORM build_body_of_mail USING l_message.
w_body_msg = l_message.
APPEND w_body_msg TO i_body_msg.
CLEAR w_body_msg.
ENDFORM. " build_body_of_mail
I hope that it helps you something.
Regards,
Venkat.O -
Problem with sending message with excel attachment
hi,
i m using sap b1 2005b i send message with excel attachment to sap user but message is reached to destination but attchment cannot send .ot shows an internal error pls help me.
reagrds,
vishalVishal,
Couple of questions.
How are you sending this message. Is it a message that you create and send Internally with an attachment.
As you reply me, please also check if the <b>Attachments folder</b> has been set under <b>Administration > System Initialization > General Settings.....Path Tab</b>
SBO tries to copy the attachment from the location you select to the Path defined for Attachments.
Let me know
Suda -
Send email with excel attachment in outlook structure - SAP 6.0
Hello experts..
I need send a email with a excel attachment and use the signature in outlook to send.
The attachment will be create in the process of send email program.
Is it possible?
How can I created and attach in the same process?
How can I use the outlook strutucture to send a email?I resolved my own problem using the BCS_EXAMPLE_7 program as sample.
Maybe you are looking for
-
I've created a PO services (item category = D) with 20% overdelivery and refer to a contract. After posting service acceptance with extra 20% of quantity, the extra 20% of amount does not reflect into contract net value [ME33K -> Header -> Statistics
-
How did Crawler get on my computer and is it part of Mozilla Firefoz?
When I opened my Firefox it went to Crawler instead of my browser. I did not ask for the change or did I download the program.I have been told its one of yours.
-
How to make Per-application Equalizer?
I'm trying to use the global systemwide equalizer in the Archwiki section for ALSA, EXCEPT I want it to work without outputting the entire default output to the equalizer. Basically, I'm trying to make a "device" for e.g. music player applications t
-
Retractable (3rd party?) headset for E51
Hello, I've recently acquired an E51 and today I excitedly(!) received a package from Germany containing some HDC-10 headsets with their 2.5mm plugs. I connected one to the E51 and got the message "Enhancement not supported". For years I had an even
-
Feature Request for Adobe Media Encoder??
Hi, Why isn't there an option to make a feature request for 'Adobe Media Encoder' on the Adobe Feature Request page??? (Adobe Media Encoder isn't on the list of software)