Create filters in Universe

Hi,
I would like to know how to create a Current Fiscal year filter at universe level and use it as a condition in WEBI?. The current FY should change dynamicallay based on the sy-datum.
For ex: Our FY will start from March of each year and end Feb of each year.
Please guide me how to achieve this functionality?
Regards,
Satya

Hi Ingo,
I have already gone through that document and it didn't say about creating the conditions on sy-datum. I have seen only creating the conditions by static values not dynamically.
Is it possible to create them at universe level or in query level.
Thanks for your help!!!
Regards,
Satya

Similar Messages

  • Create conditions in Universe

    Hi
    I have a question. I created a report using a condition created in the Universe.
    CASE @ Prompt ('Vendor', 'A',, mono, free) WHEN 0 THEN 'ALL' ELSE @ Prompt ('Vendor', 'A',, mono, free) END)
    If the input value is 0, I would submit all data from dimension. Is there any way to set this condition?
    Thank you

    Hello,
    Please refer below thread from BOBJ forum:
    [http://www.forumtopics.com/busobj/viewtopic.php?p=99071#99071]
    Hope this help..
    Regards,
    Chinmay Athavale

  • How to create filters for OPENHUB?

    hi experts,
    how can i create filters for OPENHUB Destination for the below scenario.
    Make some kind of u201Clogicu201D to support a filter on an open hub. E.g. only data from month 2011-04  and until today are u201Copen hubu2019edu201D each day and data before 2011-04 must be u201Copen hubu2019ed u201D e.g. each weekend.
    The filter on the open hub can be different from open hub to open hub. We must be able, to filter one or more fields from the open hub.
    Regards
    venuscm

    hi this may helpful for you
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a5e58d-1117-2d10-13a7-fa10c2cf20d8?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90441228-52a8-2d10-e683-fe4b2d65c331?QuickLink=index&overridelayout=true
    Edited by: Srikanth.T on Nov 24, 2011 10:03 AM

  • Hi all, May i know how to create filters in Hyperion Planning Application?

    Hi all, May i know how to create filters in Hyperion Planning Application?
    i don't know how to create filters in Planning Application. but my superior asking me to create filters.
    Thanks & Regards,
    Sekhar

    Go to Administration > Dimensions > Select Dimension > Select the member to want to assign acccess filters to :- Assign Access
    Repeat process for all access permissions.
    If there is a lot of permissions to set you could use a utility :-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s07.html
    Refresh Planning including security filters
    Also have a read of :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/mg_secfilter.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Creating filters for tRFC and qRFC (SM58).

    Hi All,
    I am trying to create filters for qRFC and tRFC as per OSS note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor. When I try to create/copy owner I am getting error "_not in name space_" in task bar when I try to save the changes, I tried all kinds of naming convection still unable to proceed. Pls tell me how can I resolve this issue.
    System:-
    Kernel version 700
    Support pack 13
    Regards,
    kurma

    Hi Jordan,
    We used to 'reorganize' the tRFC/qRFC LUWs via sm58.
    Your found note is ok and try to refer some other notes as well.
    Note 375566 - Large number of entries in tRFC and qRFC tables
    Note 760113 - Delete unprocessed LUWs in the qRFC
    Following similar thread might also help -
    how to delete error entities in TRFC queue to clear stuck
    Thanks

  • BD64 - Unable to create filters

    Hi Chinna,
    In BD64, I'm trying to create filters, but after I change from display to change mode, my Distribution Models are still grayed out, so i'm not sure If i'm being directed to the correct menu. And just to be clear I'll lay out my steps:
    I double click on the "No filter set", a "display filter" menu comes up with no options on it. However when I click on "Filter Mode Display" I get some changes, I'm not sure if that's where I need to be to create my filters. Please help!
    Thanks,
    Samer

    HI sameer,
    Filters are two types in CDM, they are Data Filters & Segment Filters.
    If you want to create Data Filters, first go in change mode after adding the Message Type to the Model View in the Below ' NO Filter Set' will be there double click on it it will open another window in that 'Create Filter group' Tab will be there click on it and Filter Group will be there then assign values to the fields and save the Model view and put that model view in a CTS.
    Best Regards,
    Sreekanth.

  • Error while creating a BO Universe (using IDT) on top of SAP HANA Calculation View with Input Parameters

    Hi All..
          We are trying to create a Universe (using IDT-Version4.0) on top of the HANA Calculation view. The Calculation view has 4 input parameters, So
    in Universe side we have created the respective prompts. For the creation of derived table we have used the following code
    SELECT *
    FROM "_SYS_BIC"."<schema_name>.<CV_Calculation_View_test>"
    'PLACEHOLDER'=('$$IP_A$$','@Prompt(A)'),
    'PLACEHOLDER'=('$$IP_B$$','@Prompt(B)'),
    'PLACEHOLDER'=('$$IP_C$$','@Prompt(C)'),
    'PLACEHOLDER'=('$$IP_D$$','@Prompt(D)')
    While validating the above code we are getting an error.
    I have attached the snapshot of that error for your reference. Please find the attachment and help me in resolving it.
    Thanks in advance.

    Hello George,
    I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
    Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
    Thanks,

  • Error while creating the OLAP Universe on BW Query.

    Hi All,
    When i am trying to create one Universe on Top of BW query which is having huge data,it throws an error u201CError getting dimensions for cube XYZ..u201D
    at the same time i tried to create a universe on another BW query it created the universe fine.
    Please give me some inputs on this what may be the cause of this.
    Thanks in Advance

    Hi,
    I would suggest to post your question here: [BusinessObjects Integration Kits; stating also the version (including Service Packs and Fix Packs) of the BOBJ software you are using.
    Regards,
    Stratos

  • Filtering in universal worklist

    Hi All,
    We are using Universal worklist for workflow approval. When I configure webdynpro application in "SWFVISU" using the workflow task and webdynpro application. I didn't give the system name.
    In portal we have five system landscape, so I i register the Item Types in potal it is registered for all system. During SAP audit, they have asked to use filtering.  Please let me know what is this filtering and how to use this.
    Further when i register a system landscape in universal worklist the is field called "Roles". Please let me know what is the purpose of this field.
    Thanks & Regards,
    H.K.Hayath Basha.

    Mark us answerd

  • Unable to find BW Query while creating connection with universe designer

    Hi colleagues,
    I've got BOE XI 3.1 SP2, Integration for SAP 3.1 SP2 and the following inssue )
    Some of BW queries that were previously released for external access and succsefully used for WebI reports now cannot be find while creating a connection in universe designer. Those are still releasde for external access but I'm not able to find some of them in the list, tried search as well.
    Has anybody faced the same problem?
    Thanks

    Hi Ingo
    SAP GUI               710 Patch 15
    BI Components       7.10 Patch 1001     
    BW 3.5 Components     3.50 Patch 6
    Actually as I figured out there were some reasons to manualy set req.status to 7 for that info-provider
    I used massive regeneration for needed queries eventually,
    BR Max

  • How do I create Filtered-X LMS (FXLMS) vi under FPGA project

    Hi, Everyone
    I am trying to implement FXLMS on cRIO FPGA.
    I studied the buildi-in example: Adaptive Noise Control (cRIO).lvproj
    There is a problem, I have no idea how to create "FXP Filtered-X LMS.vi" under a project
    I know I can get typicall LMS by using:
    Start IP generator >> LMS adaptive filter, and a pop-up window will show and help me to set the parameter. 
    But I don't know how to get FXP Filtered-X LMS.vi like the one in the proj. 
    Anyone knows?

    First get the URL of your image. If you have not posted it yet, attach it as you did previously
    post the reply then click on your attached link and copy the URL
    quickly (5 minute limit on edits) return to your post and edit it.
    When editing click the "insert an image" button
    paste the image URL into dialog box.
    submit edited post.
    Again, thanks for sharing your findings!
    Ben
    Message Edited by Ben on 03-06-2008 10:29 AM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction
    Attachments:
    insert_image.PNG ‏8 KB

  • Measure Filtering in Universe Linked to Bex for zero suppression

    Hi All,
    I've a BO explorer(polestar) report linked to a universe and connected to a Bex report.
    Suppress Zeros option on BEX did not effect Universe.
    I need to suppress zeros by filtering a measure in Universe. Can you please help me solving this?
    The need is ,BO Explorer report shows averages according to Retail Location but the measure ( aggregation level is set to average in Universe) shows wrong number as it takes the records equal to zero.
    Thanks in advance,
    Ozan Eroglu

    It doesn't work if you have retail location(plant) in your report, universe takes all the records including zeros.
    Thanks anyway, any other idea??

  • Create BO 4 universe based on netezza stored procedures

    Hi All
    Can we create Universe using Netezza Stored procedures.
    Thanks

    Hi,
    As I said this is the only way to build universes on SAP ERP (ECC 6.0).
    This application is currently a prototype but it is planned to deliver an official support of SAP ERP (ECC 6.0) by Data Federator in the coming weeks.
    Data Federator will be used for both XI 3.1 and BI 4.x to access SAP ERP data: this access will be provided only for the XI 3.1 release, we also plan to support it in BI 4.1.
    Regards
    Didier

  • Is it possible to create a new Universe that connects to this database?

    I know that BO universes can be linked to Sybase, Access, Oracle databases, etc. but i don't know if it is possible to create a universe with a connection to a Firebird database .
    Is it possible? In Universe Designer I try to create a new connection using the Connection Wizard, then I press Next and then it displays a list of databases nodes, but I can't find an option for Firebird.  Which option should I select? Can I select Generic ODBC datasource?
    Has someone else used Firebird for his/her universes?
    Edited by: PadawanGirl on Nov 24, 2010 8:53 PM

    Hi,
    I would like to give you a workaround for your problem.
    If you have BO Server installed on your machine then do the following
    -> Go to 'Central Configuration Mangager(CCM)'
    -> Right Click on 'Server Intelligence Agent(SIA)' and click 'STOP' then
    -> Double click on 'Server Intelligence Agent(SIA)'
    -> Go to 'Configuration' Tab
    -> Click 'SPECIFY' on 'CMS System Database Configuration' button then
    -> Select any one of the 3 options(depending on ur requirement) and connect to ur Database (Firebird) by giving the credentials of ur database.
    -> After doing all the necessary things Restart the SIA by clicking the buttion START on CCM and now check if u r getting Firebird database while creating a new connection.
    This is just a workaround. I hope this would b helpful to you. Please try this and see if its useful to you.
    Thanks.

  • What is universe ? how can we create report using universe ?

    Post Author: Lingaraj Patra
    CA Forum: General Feedback
    Hi,
    Please Let me know exactly the use of universe in report.
    i would like to create a report using universe in BO XI.
    Thanks.
    Lingaraj
    Mumbai, India

    Post Author: sugumar
    CA Forum: General Feedback
    hi
       Linga raj....universe is semantic layer between user and the data base .....its a business oriented mapping structure found in data base
    with regards
    sugumar.N

Maybe you are looking for

  • Profit Centre Validation to GL Accounts

    Hi All, How can we search for PC's that are valid for a combination of company code and BL account. Is there a list which shows only the valid relationships? Many thanks, Russell

  • How to pass a String as a NUMC in backwnd table

    Hi All I have a Backend Table with the Field name : PERNR, having Type as "NUMC" From portal I have got the Selcted Pernr in a form of a String. But when I am passing this to table, it gives me below error at runtime  : com.sap.aii.proxy.framework.co

  • How many space takes a digital signature

    Hello, I wait for the activation key of JCOP to use with Eclipse. so I can try nothing, only plan and clue some code snippets together. For planning my data structures I need to know how big a digital signature is. Thank you very much. mimaxx

  • Slightly shift between pages is driving me nuts.

    Hello, I've been building my site and I noticed that there is a slight shift in between all of the pages and the contact page, I have copy and paste several times the coding from one page to the other one... sometimes it shifts up and down, when navi

  • Date/Time Calculation ?

    I have a query that hopfully someone can resolve. The below select statment returns the below column and as you can see, two of these columns hold date/time information select IR.doc_no, AR.line_no, AR.step_no, AR.description, AR.app_sign, AR.approva