Create folder Clint machine

Hi
I want to create a folder in the Clint machine using a servlet or jsp is it possible to do,
If so, could any one guide me to do this.
Thankz & Regards
Anbu

all the machines are within our workgroup
Doesn't matter.
thank youYou're welcome.

Similar Messages

Time machine backup fails; error creating folder. Western Digital drive requires password which is perhaps/likely the issue. I can't eliminate the password/encryption.

Time Machine backup fails on new WD external drive (My Passport Studio); error creating folder (after several hours of Time Machine apparently working).
Background: I purchased a Western Digital drive from an Apple Store to use for Time Machine backup. I followed the Western Digital instructions that came with the drive for Mac. I didn't get the Time Machine prompt which the instructions indicated I would receive--namely to select whether I want to encrypt my Time Macine backups. (I already have a Time Machine backup I use at another location, which is perhaps why I didn't receive a prompt.)
I decided to install the Western Digital utilities and security software that comes on the disk--with a view to potentially encrypting the disk (since I still wanted to have an encrypted backup since I was mobile). I forgot that (from experience 2-years previous) that I shouldn't install Western Digital software because it just makes life really complicated.
I tried several times to do a Time Machine backup with failures each time (error creating the backup folder). I tried to get help from WD but I don't think the technicians were following what my issue was. Potentially I was not helpful in explaining it. I deleted the WD applications from my system after the first contact with WD. However the problem persisted--I still had an encrypted hard drive. After three phone sessions with three different WD techs I still could not get a solution. (By the second call I was not at all interested in having an encrypted drive--I just wanted to format and restore the drive to an unencrypted state so that I could have SOME kind of Time Machine backup.)
I still don't have a solution--either to get Time Machine working with the WD encryption/password on the drive, or to remove the encryption so I can backup. Right now my options are to return the drive to the Apple Store -- or get a return authorization from WD. Seems crazy since the drive is fine and I have the working password.

Never install "helpful software" provided by WD and Seagate (or any HD mfg.)
All such stuff is fluff and nonsense that interferes with normal HD operation.
Always when you buy a new HD, format it for Mac and then use it to TM backup or clone a HD, or archive data.
Less is more on HD new out of box. A "blank brick", no fluff and cotton candy software

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it.

Restoring desktop from backed up user folder - Time machine doesn't ??

I need to restore my desktop from a backed up copy of my user files. Went to the Genius Bar and discovered my disk was failing (Apple replaced it at No Charge! kudos) The Genius backed up my files to a folder on my external hard drive before replacing the disk and installing Leopard. Got the machine back and installed the Leopard updates to 10.5.2 and then tried to reinstall my files. The migration assistant does not recognize my folder as a viable volume to back up. Time machine does not do it either (probably since it was not created in TIme machine).
Folders inside my backup folder include: Desktop, Documents, Downloads,Library, Magazines, Movies, Music, Pictures, Public, Sites, plus the remaining files that I had stored on my desktop.
Any thoughts on how to restore these files? I noticed my application folder was not in the back up, so I imagine that I will need to restore my applications separately. The ones that I am concerned about are iTunes and iPhoto, and they were part of the Leopard image that the Genius bar installed.

I have always had problems restoring from my backups. I just replaced my hard drive and did a restore and now there are no icons in the dock (all ?'s) and I cannot click on my Applications folder in any finder window. (Oh, and the fans run constantly at top speed after being on for about 3 minutes.)
This is probably the 10th restore I've done in the past couple of years and I don't think one has worked for me.

�Unable to create the virtual machine. The error was -4�

I have a VS2003 C# application, which call JACE (a JNI wrapper) through C++ mixed mode to use JAVA object�s functions.
Because the natural of our JAVA program it must be able to reach maximum heap size of 512MB, we set it during the startup of JVM by using �-Xmx512M� parameter.
It worked well with a small PC (Dell Optiplex GX750 and Shuttle Xpc ) with only 512MB physical memory. We have about 50 machines running the application in the production.
Recently, one of our customers installs the application to a larger PC ( Shuttle Xpc with different model), which has 1 GB of physical memory. The application started throw exception from JVM. The error message is �Unable to create the virtual machine. The error was -4�. I checked with JNI return code and found that -4 mean �not enough memory�.
I did some experiment by running the application with 2GB PC, 1 GB PC, 1GB laptop, 512MB PC. I don�t found relationship between how much �maximum heap size� can be assigned and how much �physical memory� is available (reading from task manager). The 2GB machine can take only 128MB of �maximum heap size� However, 1GB machine can take up to 300MB of �maximum heap size�.
I also use program like ImageJ (http://rsb.info.nih.gov/ij/) to test maximum heap size for it. I found that ImageJ can take 512MB maximum heap size without problem. It can even take 1024MB of maximum heap size.
I have created a small program to duplicate this problem. Although it use exact the same code to start JVM up, it can go up to 650MB heap size for both 2GB and 1GB PC.
This is puzzling. Does anyone know what are factors determine how much �maximum heap size� can be set for JVM from JNI?
Software used
Windows XP SP2
Visual studio.net 2003 SP1 (the problem also occurred without SP1)
.NET Framework 1.1 SP1
JACE 1.1rc1_05
JRE 1.5.07 (also tested with JRE 1.5.09 and 1.6.0 beta)

Do you resolve the problem? If so what was the fix?
I have been getting the Java Virtual Machine Launcher error message Could not create the virtual machine when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation error invoking JVM error message.
I have restarted the machine also.
There are some remains of J2RE 1.4.2u13 still on the machine even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
I am running Win XP SP2 and IE6 SP2.
Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

Cannot Create Folder in Integration Service Catalog

Hi
I have created Catalog(SSISDB) in Sql Server 2012 , after that I was trying to create folder in Catalog but it was given an error
TITLE: Microsoft SQL Server Management Studio
Operation 'Create' on object 'CatalogFolder[@Name='ActiveDB']' failed during execution. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.0.3000.0+((SQL11_PCU_Main).121019-1322+)&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The operation cannot be started by an account that uses SQL Server Authentication. Start the operation with an account that uses Windows Authentication.
The operation cannot be started by an account that uses SQL Server Authentication. Start the operation with an account that uses Windows Authentication. (Microsoft SQL Server, Error: 27123)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3128&EvtSrc=MSSQLServer&EvtID=27123&LinkId=20476
BUTTONS:
OK
I tried several name as Folder but still the the same, please any one can help me to resolve this issue.
Thank you.
Harsha

The operation cannot be started by an account that uses SQL Server Authentication. Start the operation with an account
that uses Windows Authentication.
The operation cannot be started by an account that uses SQL Server Authentication. Start the operation with an account
that uses Windows Authentication. (Microsoft SQL Server, Error: 27123)
The error message is obvious. You're using a sql authentication account. As the error suggests you need to use a windows authentication account ie machine or domain level account to connect to server and then try to create the folder.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Message "Failed to create Java Virtual Machine" after starting Design Studio 1.2 SP1

Hi experts,
after I installed the SP1 of Design Studio 1.2 I become the Message "Failed to create java virtual machine" and I´m not able to start the Design Studio.
My java version is 1.7
My SapDesignStudio.ini File (C:\Program Files\SAP BusinessObjects\Design Studio) looks like as follow:
-startup
plugins/org.eclipse.equinox.launcher_1.3.0.v20130327-1440.jar
--launcher.library
plugins/org.eclipse.equinox.launcher.win32.win32.x86_1.1.200.v20130521-0416
-name
SAP
BusinessObjects
Design
Studio
-vmargs
-Xmx1024m
-Xms256m
-XX:PermSize=32m
-XX:MaxPermSize=512m
-XX:+HeapDumpOnOutOfMemoryError
-Dfile.encoding=UTF-8
-Dosgi.requiredJavaVersion=1.6
-Djava.net.preferIPv4Stack=true
-Djdk.xml.entityExpansionLimit=0
-Djavax.net.ssl.trustStoreProvider=SunMSCAPI
-Djavax.net.ssl.trustStoreType=Windows-ROOT
-Dorg.osgi.framework.os.name=win32
Any ideas or experiences?
Many thanks and regards,
Michael

Hello Max,
many thanks for your reply and your in my case absolutely correct answer!
In respect to your solution proposal I have renamed my Analysis-workspace folder to "Analysis-workspace-V0"
After I have started the Design Studio 1.2 SP1 a new Analysis workspace folder was created with the typical standard name "Analysis-workspace"
So I have my old Design Studio Application and an new empty Analysis folder.
By the way, in my case in addition to the folder rename it was necessary to change the -Xmx Value (SapDesignStudio.ini File) a little bit lower as in standard (in the DS1.2 SP1 setting) 1024m. To become not the Message "Failed to create Java Virtual Machine" I have changed the -Xmx Value from 1024m to 512m.
Now I´m able to start the Design Studio 1.2 SP1 as expected without Message and without breaks down after 5-6 seconds during the startup.
Thanks again!
Best regards,
Michael

Error message: " Couldn't create Java Virtual Machine"

Hi,
I recently downloaded from IBM rational application developer for websphere software v 7.5. The installation was successful. But when I try to open it, the error message:"could not create the Java virtual Machine".
I am working on Windows Xp pro. and java is automatically updated the current version jre 1.6/
even I tried to run eclipse from the directory c:/programfiles/IBM/SDP still same problem.
Please some one help me how to fix it.
Thanks.

Do you resolve the problem? If so what was the fix?
I have been getting the Java Virtual Machine Launcher error message Could not create the virtual machine when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation error invoking JVM error message.
I have restarted the machine also.
There are some remains of J2RE 1.4.2u13 still on the machine even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
I am running Win XP SP2 and IE6 SP2.
Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

Sync one folder two machines - Is it really that hard.

Sync one folder two machines - Is it really that hard.
I have one folder (with a bunch of subfolders totally 3k of image files) I'd like to mirror them on both my laptop and desktop machines.
I'd like the Desktop machine to mirror everything on the laptop and when I travel with the laptop I add images once I return everything new will be copied over.
Things I don't want in this system
• Third party software, If the OSX 10.4.8 can do it all the better
• Having to Manually hit a sync button. (But willing to budge on this one)
• It Making a duplicate copy of the folder each and everytime it connects.
I have looked at a few free items on mac's website:
Auto-backup Script (written in 2000)
http://www.apple.com/applescript/folderactions/05.html
Sync Folders 0.9 (written in 2004)
http://www.apple.com/downloads/macosx/automator/syncfolders.html
But I can't seem to get either to work on my machines The script is asking me to do something that I can't even phyically do anymore in 10.4.8
any idea's or suggestions?
Thanks
Robert Dall
iMac G4, iBook G4 Mac OS X (10.4.8) 80g video ipod (black is back baby!)

So much for other people having lives to live...
I'd help you out if I knew anything about rsync, and
I'm sure many others would, too, but apparently the
ones who do know are doing other things. Considering
it's a weekend, that really shouldn't be surprising.
There are people and companies that give such
immediate service for a fee. Look around and I'm sure
you'll find one that'll offer to not only advise you
but will also create the solution for you. They'll
even you let you have the solution, for a price.
Azqi, please don't belittle me about how the captitalism works in the world. I might been in a small community outside Vancouver that doesn't even have a large MAC dealership who could answer my question. I was already at the shop that does deal in mac because I wanted to SHOP LOCAL. I am perfectly aware I am on a FREE forum and have a life outside of this forum also! I waited four days before I said what I said and before my little question was lost in the forums. If I had 300 responses to my question like yours I'd never return. . . .
I am just saying that it has been a bit of a cold welcome to these forums, as this isn't the first question that has gone unanswered. . . . and thanks to some helpful folks it isn't.

To create folder in Application server

hi,
How to create folder in application server from presentation server??
how is the program it??
reply me soon...
thx,
s.suresh.

hi Suresh
Hope u r having nice day
here i am sending a sample report which can upload the file to Application Server which inturn automatically create folder .
REPORT ZSHR_UPLOAD_TO_APPLICATION              .
DATA : BEGIN OF IT_MAT OCCURS 0,
          MBRSH LIKE MARA-MBRSH,
          MTART LIKE MARA-MTART,
          MAKTX LIKE MAKT-MAKTX,
          MEINS LIKE MARA-MEINS,
       END OF IT_MAT.
DATA : W_DIR(40).
MOVE 'D:\usr\sap\DEV\DVEBMGS00\work\SHR' TO W_DIR.
"SHR" IS A FOLDER NAME TO BE CREATED
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                     = 'C:\MAT.TXT'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
TABLES
    DATA_TAB                      = IT_MAT
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
OPEN DATASET W_DIR FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
IF SY-SUBRC EQ 0.
    LOOP AT IT_MAT.
       TRANSFER IT_MAT TO W_DIR.
    ENDLOOP.
ENDIF.
CLOSE DATASET W_DIR.
IF USEFUL AWARD POINTS.
REGARDS
HEMASEKHARA REDDY S

Error 7 occurred at Create Folder in Create Directory Recursive.vi-

Recieved following message when attemoting to create source distribution
Error 7 occurred at Create Folder in Create Directory Recursive.vi->ABAPI Dist Create Directory Recursive.vi->ABAPI Dist Chk for Destinations.vi->ABAPI Copy Files and Apply Settings.vi->SDBEP_Invoke_Build_Engine.vi->SDBUIP_Build_Invoke.vi->SDBUIP_Build_Rule_Editor.vi->SDBUIP_Item_OnDoProperties.vi->SDBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux.

Hello,
Could you please list which options you are selecting when building a
source distribution (I am assuming you are using LabVIEW 8.0?).
Do you get this error when clicking on "Generate Preview" button when configuring source distribution properties?
Under "Distribution Settings" category, could you try checking the
"Disconnect type definitions and remove unuses polymorphic VI
instances" option and see if that helps with the build process?
Also I suggest Mass Compiling your VIs (Tools -> Advanced -> Mass Compile) before creating a source distribution.
If these do not help, could you attach your project with all the VIs it contains here?
Thank you and best regards,
Shakhina P.
Applications Engineer
National Instruments

Error while creating folder: Path is invalid because folder does not exist

Hi,
I am having an issue while creating Folders in ID, when I create folder Structure like EDI -> VENDOR -> DELL I am getting the error as below:
Path /EDI/VENDOR/DELL/ is invalid because folder VENDOR does not exist
So first 2 levels of folder structure is fine and when I create third level (DELL) I get the above error. Any idea how to resolve this or is this the limitation?
We have
Service Pack:06
Release:NW711_06_REL
Thanks,
Laxman

Hi Laxman,
Kindly try to refresh the SLD cache by going to Environment -> Clear SLD Data Cache. Make sure that the Cache Status are all in green.
Hope this would help.
Regards,
Jenny

"Low Memory Warning" and "fails to create a virtual machine"

From ide.conf, I learnt:
If you are getting the 'Low Memory Warning' Message Dialog while running JDeveloper, please increase the -Xmx value below from the default 768M to something greater, like 1024M or 1250M. If after increasing the value, JDeveloper is no longer starting up because it fails to create a virtual machine, then please reduce the modified -Xmx value.
However,
If I set it to a bigger value, say 512M, it fails to create a virtual machine.
If I set it to a smaller value, say 400M, it throws Low Memory Warning after a short while.
So I do not know how to do. Total physical memory of my box is 4G. Free physical user memory after starting jdev is 1.5G.

512M isn't bigger, the default (according to your reading) is 768M...
I just tried with JDeveloper 11.1.2.2.0 (64-bit machine, but using 32-bit JVM) - works fine with 1024M - just to confirm that my changes are working, 5024M does give me "unable to create virtual machine"
Have you messed about with other settings?

Error while creating folder inside the Public & Private Folders

Dear Gurus,
I am trying to create a new folder under Public & Private folder. But system is giving the error as " Please enter complete document key. Rollback was unsuccessful; the document is not assigtned to the folder."
But system is creating the folder outside the Public & Private folder.Created folder is visible only in the serach result. I am not able to delete the folder also from the serach result.
Request your inputs on how can I solve this issue
Regards
Damodar Pai

Dear Gurus,
Problem got solved. There is one more table DOST which is linked to DRAW & DRAT. We deleted the vales of DOST & tried. It is wokring now.
Thanks for your precious inputs.
Regards
Damodar Pai
Edited by: damspai on Aug 25, 2009 9:37 AM

How to find out which user create folder

how to find out which user create folder in shared drive?

Hello,
you have to enable Auditing in on the DCs OU and also on the top folder level where this should be monitored.
http://technet.microsoft.com/en-us/library/cc784387(v=ws.10).aspx
http://support.microsoft.com/kb/310399
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Create folder Clint machine

Similar Messages

Maybe you are looking for