Create Folder on 9500 Communicator
hi
I m trying to save the image in specific folder on the 9500 communicator.But it cant......
I try to make new folder under the root directory of the Nokia communicator but not get success. I success fully save the image under the root directory obut not under the Folder?Can any one Please help mi in this?
Hi all i need help . i am developing j2ME application . after i deploy the appliction n to the phone trying to send http request to a .net applcation the message is giving me is (bad request invalid header)
HttpConnection connection = (HttpConnection)Connector.open(http://harrisconsultium.com/rechargeplus/mobileaccess.aspx?);
connection.setRequestMethod(HttpConnection.GET);
connection.setRequestProperty("User-Agent", "Profile/MIDP-1.0 Configuration/CLDC-1.0");
connection.setRequestProperty("IF-Modified-Since","20 Jan 2001 16:19:14 GMT");
connection.setRequestProperty("Content-Language","en-CA");
please i need ur help .
Similar Messages
-
9500 Communicator lack of support - USA
I purchased the 9500 Communicator from Dubai back in Nov 2004 while stationed overseas with the US military, when the 9500 first came out. I have been using the phone in the US without any real major issues. Being the clumsy person that I am, I have dropped the phone on several occasions. On one of those occasions the phone fell and the front face came off and so did the keypad. It was windy and the keypad flew away why it was not attached as one with the face place I have no clue, what was Nokia thinking? Still I was able to use the phone since I remembered where the numbers were on the blank keypad.
My issue with Nokia is:
I have been trying for over two weeks to get some one in Nokia (USA, Middle East and UK) to give me a Repair Service Center's address where I can mail my communicator. I need to replace the worn/scratched/broke front and back cover as well as getting the firmware upgrade [current version I have is: 4.44(1) ] and yes, my front cover has started to flop as well.
1) I do NOT care WHERE I have to send it, just give me an address!
2) Yes I know that it is out of warranty and that I WILL have to pay for the service and parts, FINE I will PAY, JUST GIVE ME A PLACE TO MAIL IT TO! This is the question I have been asking for ever it seems! What part of this request is not comprehend able?
3) Nokia’s customer support is so pathetic! All you get is the run around! Everyone is just trying to point the finger to someone else. I even tried to order just the keypad from the US and I was told there might be a difference between the US keypad and the UK version - I DO NOT THINK SO! I have been in the telecom & computer industry in both commercial & government/military for almost 15 years. It's not like the US/UK keypad is in any other language than English! The number 1 will always look like the number 1 in the UK and the US! What a lame excuse! It is like Nokia can not communicate with each other at a Global Enterprise level! Is this NOT a Global company? What type of message are you sending your customers and your investors? I mean just because there are regional subsidiaries should not mean that there is NO communications between other regions, or wait are Nokia's products NOT communications equipment? If they can sell communication equipment and can NOT communicate amongst themselves that's pretty pathetic! It is pretty sad that one customer service center has no access to the other. Have you not heard of the software like the Remedy ticketing system? It is great for supporting things like customer support even on a Global scale!
What should have been a mundane task of giving me an address has turned into a praying for a miracle to happen request! Why did this happen? Why should it go so far up to the next level? What type of changes in training is Nokia implementing if that?
Why doesn’t the Executive branch review the Operations & Maintenance (O&M) procedures to make Nokia more efficient? Do they not listen to what their customers and industry want/ need? There are so many websites that do reviews on products like Nokia phones, is there no group in Nokia that takes heed to what others think of their product and review them and if possible send those changes down to the research and development and production departments? I know I am not the smartest guy, but I think I have been around to know better on what things companies can do to create and sell their product and thus make a name and PROFIT for themselves! Currently in the US, Nokia's stock price is ONLY $4.00 (USD). I'll bet if they actually made better products, see where industry is headed, actually listened to their customers and did some really good predictive analyses in marketing they would be an even better company producing a much better product that would create a frenzy of people all over the world wanting to buy their products like the Motorola Razr mobile phone when it first came out!
It seems that everyone I have spoken to says the same thing: Nokia products are nice but they lacks features, standard operating system, availability of software, looks, and support!
Nokia is suppose to be a Global company trying to sell its products to people and companies on a Global scale. If you can NOT support your own product then how in the hell are you suppose to support your customers? I always thought that the 9500 Communicator was Nokia's top of the line product? Well if that being the case then Nokia SHOULD have top notch support for this product! If Nokia is suppose to be the Mercedes of mobile phones well act like it then! If you can not support your high end system then why produce it in the first place? There should be tons of competent technical support professionals, options, upgrades and accessories etc... if you want to make Nokia into an industry leader then you need to have a product that works well and is sought after not only by customers but also by your OWN employees and is supported well and get some real talented minds to think of some newer things to integrate in your phone lines. Basically the Communicator series should have EVERYTHING that the mobile business customer needs on the road without having to carry around a laptop!
Maybe on the NEXT version/ generation of Communicators they would have:
Vibrate mode
Voice recognition
Operating system should be Microsoft windows mobile based
More local storage especially for MP3s
Use ring tones
2.0 or greater Mega pixel camera
Mini USB connector
USB 2.0
Programmable soft keys
Newer Bluetooth for stereo headsets
A lit keypad for when the cover is open
An external keyboard that folds and you can use for emails/ SMS
802.11 (b/g/n) support with WAP/ WEP encryption
Colored face and back plates that are interchangeable
Touch screen would be an improvement
Larger capacity internal memory
Ability to block calls that were Unknown, or originate from blocked numbers, certain numbers/ certain area codes etc...Hi
http://www.apps.nokia.co.uk/clubnokiaservice/
If you key in 'London' into the search box, you should get a list of Nokia service companies who should be able to help.
Although I'm not in London I have used similar 3rd party companies to do chargable repairs (eg when hinges broke!)
You could try calling some of the them to see how they might be able to help.
Good luck!!
Rich -
Linking a programmatically created folder in SharePoint Document Library.
I have created folders within a document library using InfoPath & C#. To that folder I uploaded several documents using several file attachment controls within the same InfoPath Form using the code behind the form. Now I want to create an Hyperlink
to each folder in another document folder's column that has the relationship with the previously created folder.
When I googled I saw there are lot of articles to create Folders ,uploading documents to folders in a SharePoint Library but I cannot understand how to create a hyperlink in a SharePoint Document Library field column.
Could someone help me to solve this matter?
Thanks,
Regards,
ChiranthakaWhy don’t you create a hyperlink column to store the hyperlink value, or you can use a lookup column to lookup the related folder item?
Qiao Wei
TechNet Community Support -
have created folder in library Cost , and under
Cost created so many folder for different model, wants to keep them in ascending order,
I found the option I can sort it as ascending order, when I close this screen than it goes back to way it was,
is there a way to save it in ascending order all the folder screen, so when I open cost library , it stays in same order,
2nd question : we have approved column , when the person approved the cost , is there a way to keep that person the name,
right now when the next time some other users open that file that users name comes in the approved column,
can some one please help,
any advise will be helpful.Hi Bitia,
To create workflow in SharePoint, I recommend to use SharePoint Designer to achieve this goal.
Firstly, we need to allow the site to be edited in SharePoint Designer, please refer to the "SharePoint Designer settings page" part in the article below:
https://support.office.com/en-ca/article/Managing-SharePoint-Designer-2010-e12d76ce-83f7-4dde-864c-6c1e210399b6#__toc254689397
Secondly, we can install SharePoint Designer from the site or just download and install it.
https://kb.pachosting.hk/article/how-to-install-sharepoint-designer-to-edit-site-content-9333.html
http://www.microsoft.com/en-us/download/details.aspx?id=16573
After that, we can use SharePoint Designer to create workflow:
https://support.office.com/en-ie/article/Introduction-to-designing-and-customizing-workflows-32c9c0bf-5e20-4f74-8b9c-d3ea79f2962b
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
To create folder in Application server
hi,
How to create folder in application server from presentation server??
how is the program it??
reply me soon...
thx,
s.suresh.hi Suresh
Hope u r having nice day
here i am sending a sample report which can upload the file to Application Server which inturn automatically create folder .
REPORT ZSHR_UPLOAD_TO_APPLICATION .
DATA : BEGIN OF IT_MAT OCCURS 0,
MBRSH LIKE MARA-MBRSH,
MTART LIKE MARA-MTART,
MAKTX LIKE MAKT-MAKTX,
MEINS LIKE MARA-MEINS,
END OF IT_MAT.
DATA : W_DIR(40).
MOVE 'D:\usr\sap\DEV\DVEBMGS00\work\SHR' TO W_DIR.
"SHR" IS A FOLDER NAME TO BE CREATED
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\MAT.TXT'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = IT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
OPEN DATASET W_DIR FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
IF SY-SUBRC EQ 0.
LOOP AT IT_MAT.
TRANSFER IT_MAT TO W_DIR.
ENDLOOP.
ENDIF.
CLOSE DATASET W_DIR.
IF USEFUL AWARD POINTS.
REGARDS
HEMASEKHARA REDDY S -
Error 7 occurred at Create Folder in Create Directory Recursive.vi-
Recieved following message when attemoting to create source distribution
Error 7 occurred at Create Folder in Create Directory Recursive.vi->ABAPI Dist Create Directory Recursive.vi->ABAPI Dist Chk for Destinations.vi->ABAPI Copy Files and Apply Settings.vi->SDBEP_Invoke_Build_Engine.vi->SDBUIP_Build_Invoke.vi->SDBUIP_Build_Rule_Editor.vi->SDBUIP_Item_OnDoProperties.vi->SDBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux.Hello,
Could you please list which options you are selecting when building a
source distribution (I am assuming you are using LabVIEW 8.0?).
Do you get this error when clicking on "Generate Preview" button when configuring source distribution properties?
Under "Distribution Settings" category, could you try checking the
"Disconnect type definitions and remove unuses polymorphic VI
instances" option and see if that helps with the build process?
Also I suggest Mass Compiling your VIs (Tools -> Advanced -> Mass Compile) before creating a source distribution.
If these do not help, could you attach your project with all the VIs it contains here?
Thank you and best regards,
Shakhina P.
Applications Engineer
National Instruments -
Error while creating folder: Path is invalid because folder does not exist
Hi,
I am having an issue while creating Folders in ID, when I create folder Structure like EDI -> VENDOR -> DELL I am getting the error as below:
Path /EDI/VENDOR/DELL/ is invalid because folder VENDOR does not exist
So first 2 levels of folder structure is fine and when I create third level (DELL) I get the above error. Any idea how to resolve this or is this the limitation?
We have
Service Pack:06
Release:NW711_06_REL
Thanks,
LaxmanHi Laxman,
Kindly try to refresh the SLD cache by going to Environment -> Clear SLD Data Cache. Make sure that the Cache Status are all in green.
Hope this would help.
Regards,
Jenny -
Error while creating folder inside the Public & Private Folders
Dear Gurus,
I am trying to create a new folder under Public & Private folder. But system is giving the error as " Please enter complete document key. Rollback was unsuccessful; the document is not assigtned to the folder."
But system is creating the folder outside the Public & Private folder.Created folder is visible only in the serach result. I am not able to delete the folder also from the serach result.
Request your inputs on how can I solve this issue
Regards
Damodar PaiDear Gurus,
Problem got solved. There is one more table DOST which is linked to DRAW & DRAT. We deleted the vales of DOST & tried. It is wokring now.
Thanks for your precious inputs.
Regards
Damodar Pai
Edited by: damspai on Aug 25, 2009 9:37 AM -
How to find out which user create folder
how to find out which user create folder in shared drive?
Hello,
you have to enable Auditing in on the DCs OU and also on the top folder level where this should be monitored.
http://technet.microsoft.com/en-us/library/cc784387(v=ws.10).aspx
http://support.microsoft.com/kb/310399
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights. -
Time Machine backup fails on new WD external drive (My Passport Studio); error creating folder (after several hours of Time Machine apparently working).
Background: I purchased a Western Digital drive from an Apple Store to use for Time Machine backup. I followed the Western Digital instructions that came with the drive for Mac. I didn't get the Time Machine prompt which the instructions indicated I would receive--namely to select whether I want to encrypt my Time Macine backups. (I already have a Time Machine backup I use at another location, which is perhaps why I didn't receive a prompt.)
I decided to install the Western Digital utilities and security software that comes on the disk--with a view to potentially encrypting the disk (since I still wanted to have an encrypted backup since I was mobile). I forgot that (from experience 2-years previous) that I shouldn't install Western Digital software because it just makes life really complicated.
I tried several times to do a Time Machine backup with failures each time (error creating the backup folder). I tried to get help from WD but I don't think the technicians were following what my issue was. Potentially I was not helpful in explaining it. I deleted the WD applications from my system after the first contact with WD. However the problem persisted--I still had an encrypted hard drive. After three phone sessions with three different WD techs I still could not get a solution. (By the second call I was not at all interested in having an encrypted drive--I just wanted to format and restore the drive to an unencrypted state so that I could have SOME kind of Time Machine backup.)
I still don't have a solution--either to get Time Machine working with the WD encryption/password on the drive, or to remove the encryption so I can backup. Right now my options are to return the drive to the Apple Store -- or get a return authorization from WD. Seems crazy since the drive is fine and I have the working password.Never install "helpful software" provided by WD and Seagate (or any HD mfg.)
All such stuff is fluff and nonsense that interferes with normal HD operation.
Always when you buy a new HD, format it for Mac and then use it to TM backup or clone a HD, or archive data.
Less is more on HD new out of box. A "blank brick", no fluff and cotton candy software -
How to move pics from "picture library" to created folder
Just started using 9310 (from 8330) with new SD card. Have a few pics on it and can't figure out how to transfer a photo in "picture library" into a newly created folder. Was so easy on 8330 with simple "move into folder" option... HELP! Thanks!
Hello equipagekm,
Welcome to the forums.
The option to move to folder will not be present but what you can do is choose the "cut" option and then once in the new folder hit the menu key and choose "paste".
Hope this helps. Let us know if you need anything else.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Creating pdf file from excel worksheet and save file in a macro created folder.
Hi I have 3 worksheets and I want to conditionally convert them into a pdf file and than save said file into a folder that the macro will create if not already existing and name it with content of cell A1. So my question is if it is possible to do that with
the following program?
Thanks.
Sub PrintStuff()
Dim vShts As Variant
Dim strFileName As String
vShts = Sheets(1).Range("A1")
If Not IsNumeric(vShts) Then
Exit Sub
Else
' Change path and filename as desired
strFileName = "C:\MyFolder\MySubfolder\MyFile.pdf"
If strFileName <> "False" Then
Select Case vShts
Case 1
Sheets("Sheet1").Select
Case 2
Sheets("Sheet2").Select
Case 3
Sheets(Array("Sheet1", "Sheet2")).Select
End Select
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, _
Filename:=strFileName, _
OpenAfterPublish:=False
End If
End If
End SubOption Explicit
Sub PrintStuff()
Dim Path As String, FileName As String
Dim ThisSheet As Variant
Dim MySheets As Variant
Path = "C:\MyFolder\MySubfolder\"
FileName = "MyFile.pdf"
If Not FolderCreate("C:\MyFolder\MySubfolder") Then
MsgBox "Can not create folder"
Exit Sub
End If
Select Case Range("A1")
Case 1
Set MySheets = Sheets("Sheet1")
Case 2
Set MySheets = Sheets("Sheet2")
Case 3
Set MySheets = Sheets(Array("Sheet1", "Sheet2"))
Case Else
MsgBox "Uuups."
Exit Sub
End Select
Set ThisSheet = ActiveSheet
MySheets.Select
ActiveSheet.ExportAsFixedFormat xlTypePDF, Path & FileName, OpenAfterPublish:=False
ThisSheet.Select
End Sub
Private Function FolderCreate(ByVal Path As String) As Boolean
'Creates a complete sub directory structure
Dim Temp, i As Integer
On Error GoTo ExitPoint
If Dir(Path, vbDirectory) = "" Then
If Right$(Path, 1) = "\" Then Path = Left$(Path, Len(Path) - 1)
If Left$(Path, 2) = "\\" Then
i = InStr(3, Path, "\")
Temp = Split(Mid$(Path, i + 1), "\")
Temp(0) = Left$(Path, i) & Temp(0)
Else
Temp = Split(Path, "\")
End If
Path = ""
For i = 0 To UBound(Temp)
Path = Path & Temp(i) & "\"
If Dir(Path, vbDirectory) = "" Then MkDir Path
Next
End If
FolderCreate = True
ExitPoint:
End Function -
How to create folder on server.
Hello,
I want to make folder on remote server using sun.net.ftp. So how i can do that? I have api to create folder using issueCommand(newdir). But when i do this it gives null pointer error. In issueCommand() only pass directory name or path of remote server in which i want to create this folder.
For example
remotes server path : apps/bhavesh
new folder name like : test
so in issueCommand() pass only folder name or path also. and how i can do that?
Reply me As soon as possible.
Regards,
Bhavesh KharwaHi Grafl,
Chk this link
Folder creation in AL11 using ABAP program
try this code.This works on UNIX servers
data: unixcom like rlgrap-filename.
data: begin of tabl occurs 500,
line(400),
end of tabl.
dir = unixcom = 'mkdir mydir'. "command to create dir
"to execute the unix command
call 'SYSTEM' id 'COMMAND' field unixcom
id 'TAB' field tabl[].
<b>Reward Points if Useful</b>
Regards
Gokul -
HI,
How to create folder in Menu
Like In Production Menu we have productionReport.How is it possible?Using Vb.NetHi,
As complement of Vitor said, you can create your menu like this :
SAPbouiCOM.Menus oMenus;
SAPbouiCOM.MenuItem oMenuItem;
SAPbouiCOM.MenuCreationParams oMenuCreationParams;
string sPath = "";
try
sPath = System.Windows.Forms.Application.StartupPath;
oMenuCreationParams = (SAPbouiCOM.MenuCreationParams)SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_MenuCreationParams);
oMenuCreationParams.Type = SAPbouiCOM.BoMenuType.mt_POPUP;
oMenuCreationParams.Image = sPath + "
IMG127.BMP";
oMenuCreationParams.Position = 6;
oMenuCreationParams.UniqueID = "IFC_MENU_COM";
oMenuCreationParams.String = ChangeLanguage.GetName_For_Menu(SBO_Application.Language); ;
oMenuItem = SBO_Application.Menus.Item("43520");
oMenus = oMenuItem.SubMenus;
if(SBO_Application.Menus.Exists("IFC_MENU_COM") == true)
return;
oMenuItem = oMenus.AddEx(oMenuCreationParams);
System.Runtime.InteropServices.Marshal.ReleaseComObject(oMenuCreationParams);
oMenuCreationParams = null;
oMenuCreationParams = (SAPbouiCOM.MenuCreationParams)SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_MenuCreationParams);
oMenuCreationParams.Type = SAPbouiCOM.BoMenuType.mt_STRING;
oMenuCreationParams.Image = "";
oMenuCreationParams.Position = 1;
oMenuCreationParams.UniqueID = "IFC_COM";
oMenuCreationParams.String = ChangeLanguage.GetName_For_SubMenu(SBO_Application.Language, "1");
oMenus = oMenuItem.SubMenus;
oMenus.AddEx(oMenuCreationParams);
oMenuCreationParams = (SAPbouiCOM.MenuCreationParams)SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_MenuCreationParams);
oMenuCreationParams.Type = SAPbouiCOM.BoMenuType.mt_STRING;
oMenuCreationParams.Image = "";
oMenuCreationParams.Position = 2;
oMenuCreationParams.UniqueID = "IFC_CALC";
oMenuCreationParams.String = ChangeLanguage.GetName_For_SubMenu(SBO_Application.Language, "2");
oMenus.AddEx(oMenuCreationParams);
oMenuCreationParams = (SAPbouiCOM.MenuCreationParams)SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_MenuCreationParams);
oMenuCreationParams.Type = SAPbouiCOM.BoMenuType.mt_STRING;
oMenuCreationParams.Image = "";
oMenuCreationParams.Position = 3;
oMenuCreationParams.UniqueID = "IFC_BULL";
oMenuCreationParams.String = ChangeLanguage.GetName_For_SubMenu(SBO_Application.Language, "3");
oMenus.AddEx(oMenuCreationParams);
Hope it's help you.
Regards
Michael -
How do I create a forum (online community)?
Can I create a forum(online community) using iWeb '08?
istandnfaith wrote:
Can I create a forum(online community) using iWeb '08?
iWeb itself doesn't offer a way to do this, but consider opening a forum at free, web-based Lefora and hyperlinking from your iWeb site to it:
http://www.lefora.com
And as an alternative to setting up a basic text or image hyperlink to your external forum, you can link to it directly from iWeb's navigation bar:
Create a blank internal page named "Forum" (actually you can name the page whatever you want.) Then in that Forum page add an HTML Snippet with the following code:
<script type="text/javascript">
parent.window.location = "http://www.yourforumname.com"; // change this to your own URL
</script>
...Once published, clicking on "Forum" in iWeb's navbar will immediately redirect to your external forum page. (Thanks to Cyclosaurus for the code).
Maybe you are looking for
-
SAP R/3 4.7 EE & E-recruiting
Hi, I m looking for some information related to Addition of E-recruiting to SAP R/3 4.7 EE I understnad for this e-rec shud be implemented on a seperate instance and use the ALE's for Data Transfer. I would like to know the Complexity and the Time in
-
How can i clean up my MacBook Air?
I have a 64 Gb laptop. It keeps telling me i am running out of space. It got so bad i couldnt open more then 3 applications at a time, and then i couldn't open ITunes. That's bad. I checked my usage and here it is: Audio- 9.7 mb movies- 0 kb photos-
-
I used to find it very useful to drag and highlight all the info in the header of the email including sender, cc, date, subject etc to be able to paste in into other docs as reminders of who sent what when. Now I have to do 2 copy/pastes. Not a deal
-
I tried exporting 1080i video using Quick Time Conversion and setting it to DVCPRO50 - NTSC to create a DVD. The DVD video looks very pixilated and jagged on a Standard Def screen. I tried using compressor and it looks the same. How can I export thes
-
LC credit release through vkm3
Dear Brothers, My LC document is worth 5 millions ,after reaching that amount the sales orders are gettings blocked,BUt once a new sales order is created suppose for 5.5 million it is blocking me at the delivery note creation level which is correct,