Create frames in-between two instances

I'm working on some practice animations, but the issue I've been having is that I don't know how I can work on my inbetweening on a video layer with onion-skinning enabled. I know I could just switch to frame-by-frame animation, but I wanted to have onion-skinning enabled still so that I can make my inbetween animations more acurate. Is there something I am missing in particular that can allow me to do this?

PS only does simplified interpolation. You can't tweak anything here. You wil lhave to use After Effects or other tools for more refined control.
Mylenium

Similar Messages

Distinguishing between two instances of the same portlet

Hi Experts,
Is there a way to distinguish between two instance of the same portlet in different browser windows?
I'm looking for something like URL parameter passing, but just for portlets.
The problem is, I want a way to pass a parameter between views in a portlet, but in such a way that if another browser window is opened and navigated to that portlet page, the parameter won't be the same. Perhaps I can explain better with this example:
Page A has a portlet on it which has a textbox and 2 buttons - the first button stores the value in the textbox in the PortletRequest (or PortletURL) and if you click the second button the portlet navigates to a different view which displays the value. If I navigate with a second browser window to Page A, however, and only click the navigate button, that value which was stored by the first instance of the portlet will still be shown. I want them to be independent, I don't want changes in the one's PortletRequest to reflect in the other one's PortletRequest.
Any ideas?
Thanks,
JP

Why not use two instances of the same portlet, i.e. create two channels of the same portlet.
The behave the same, have the same application logic, so all you need is to transfer informations between the two portlets.If you want this within user space use the portlet session, otherwise access the http session context /application context and store the data there.
The behavior would be controlled by the portlet preferences, so channel a (instance 1) would be configured to run as controller and channel b (instance 2) would be configured as receiver.

How to create radio button between two slection screen

hello all.
could you please guide me how to create radio button between two SELECTION-SCREEN in screen painter.
Thank you,
srinivas

hi
SEE THIS CODE
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R3 RADIOBUTTON GROUP G2 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R4 RADIOBUTTON GROUP G2.
SELECTION-SCREEN COMMENT 5(20) TEXT-004 FOR FIELD R4.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
<b>rEWARD IF USEFULL</b>

Create view link between two view objects (from programmatic data source)

Hi Experts,
Can we create a link between two view objects (they are created from programmatic datasource ; not from either entity or sql query). If yes how to create the link; ( i mean the like attributes?)
I would also like to drag and drop that in my page so that i can see as top master form and the below child table. Assume in my program i will be only have one master object and many child objects.
Any hits or idea pls.
-t

Easiest way to do this is to add additional transient attributes to your master view object, and then include those additional transient attributes in the list of source attributes for your view link. This way, you can get BC4J to automatically refer to their values with no additional code on your part.

Message bridge between two instances

I am trying to setup messaging bridge between two instances of weblogic server.
Can the second instance belong to a different domain? If yes how to configure it?

Yes, you can configure a messaging bridge to work between two WebLogic domains.
The general instructions of configuring a message bridge, including the bridge instance itself, the bridge destinations and the adapter, can be found at
http://edocs.bea.com/wls/docs103/bridge/basics.html#wp1168461
The only extra thing that you may need to take care of for the cross-domain case is to configure cross-domain security as instructed at
http://edocs.bea.com/wls/docs103/bridge/wls_interop.html#wp1126873
Regards,
Dongbo

Copying SDO_GEOMETRY between two instances

have two oracle instances on separate servers:
Server 1 Oracle 10.2 Solaris
Server 2 Oracle 9.2 Solaris
In each instance I have a Schema called GEO_DATA with a Table called ROADS. This is a very simple table; id (number), road_name(varchar2) and geometry (sdo_geometry)
The ROADS table in Server 1 will get updated during the day. What is the best way to move data from Server 1 to Server 2? Server 2 ROADS is just read-only and will be used for data viewing.
I am very new to Oracle Spatial – so apologies for the basic question:
Can I just create a database link between the two instances and then run a simple SQL query:
Insert into Server 2.GEO_DATA.ROADS Select * from Server 1.GEO_DATA.ROADS
Feedback appreciated.

Hello Ivan,
I just read this: Copy spatial data
I need to copy spatial data from a 8.1.6 (remote) to 8.1.7 (local). I tried the "CREATE DATABASE LINK" statement and got the error ORA-22804 (remote operations not permitted on object tables or user-defined type columns).
Is this still true in Oracle 9 and 10?

How Can I create a cluster of two instances running on the same server?

Hello,
I can't find how to create a cluster or even a failover rule for my two instances running on the same server ODSEE 11gR1.
Could you please help?
Thanks,

Hello,
Clustering (intended as Sun Cluster, Veritas Cluster, etc... ) IS NOT SUPPORTED since 7.0:
http://docs.oracle.com/cd/E20295_01/pdf/821-1216.pdf [page 20]
and, based on my own experience, is the WORST way of achieving high availability of an LDAP Directory Service and an almost GRANTED way to get replication issues in your topology (lock, split, re-init, etc...).
Please use instead the 'application-level' clustering that you get out of the box with the Multi-Master Replication.
http://docs.oracle.com/cd/E20295_01/html/821-1217/index.html
http://docs.oracle.com/cd/E20295_01/html/821-1220/fhkry.html#scrolltoc
HTH,
Marco

Create Foreign Keys between two Schemata

Hello,
I use Oracle 10g and I trying to create a ForeignKey constraint between two tables in different schemata.
This is my DDL-Script
SQL> CREATE TABLE PROJECT.LOCATION (
ID INTEGER NOT NULL,
MAIN INTEGER,
KURZ VARCHAR(40),
NAME VARCHAR(40),
STRASSE VARCHAR(40),
ORT VARCHAR(40),
TELEFON VARCHAR(40),
FAX VARCHAR(40),
EMAIL VARCHAR(40),
PLZ VARCHAR(40),
CONSTRAINT PK_LOCATION PRIMARY KEY (ID)
Tablespace PROJECT;
CREATE TABLE Diary.Diary (
ID INTEGER NOT NULL,
LOCATION_ID INTEGER NOT NULL,
CONSTRAINT PK_Diary PRIMARY KEY (ID)
Tablespace Diary;
ALTER TABLE Diary.Diary
ADD CONSTRAINT FK_Diary_Has_LOCATION
FOREIGN KEY (LOCATION_ID) REFERENCES PROJECT.LOCATION (ID);
This is the Message that gives my SQLplus :
SQL> ALTER TABLE Diary.Diary
2 ADD CONSTRAINT FK_Diary_Has_LOCATION
3 FOREIGN KEY (LOCATION_ID) REFERENCES PROJECT.LOCATION (ID);
FOREIGN KEY (LOCATION_ID) REFERENCES PROJECT.LOCATION (ID)
FEHLER in Zeile 3:
ORA-00942: Tabelle oder View nicht vorhanden
All Grants (select,alter,references) are given to the User for the tables.
Whats then Problem?

You miss some priviledge:
SQL> create user project identified by project;
Utente creato.
SQL> grant connect, resource to project;
Concessione riuscita.
SQL> create user diary identified by diary;
Utente creato.
SQL> grant connect, resource to diary;
Concessione riuscita.
SQL> CREATE TABLE PROJECT.LOCATION (
2 ID INTEGER NOT NULL,
3 MAIN INTEGER,
4 KURZ VARCHAR(40),
5 NAME VARCHAR(40),
6 STRASSE VARCHAR(40),
7 ORT VARCHAR(40),
8 TELEFON VARCHAR(40),
9 FAX VARCHAR(40),
10 EMAIL VARCHAR(40),
11 PLZ VARCHAR(40),
12 CONSTRAINT PK_LOCATION PRIMARY KEY (ID)
13 )
14 ;
Tabella creata.
SQL> CREATE TABLE Diary.Diary (
2 ID INTEGER NOT NULL,
3 LOCATION_ID INTEGER NOT NULL,
4 CONSTRAINT PK_Diary PRIMARY KEY (ID)
5 )
6 ;
Tabella creata.
SQL> ALTER TABLE Diary.Diary
2 ADD CONSTRAINT FK_Diary_Has_LOCATION
3 FOREIGN KEY (LOCATION_ID) REFERENCES PROJECT.LOCATION (ID);
FOREIGN KEY (LOCATION_ID) REFERENCES PROJECT.LOCATION (ID)
ERRORE alla riga 3:
ORA-00942: tabella o vista inesistente
-- DIARY CAN'T SEE PROJECT.LOCATION
SQL> grant select on project.location to diary;
Concessione riuscita.
SQL> ALTER TABLE Diary.Diary
2 ADD CONSTRAINT FK_Diary_Has_LOCATION
3 FOREIGN KEY (LOCATION_ID) REFERENCES PROJECT.LOCATION (ID);
FOREIGN KEY (LOCATION_ID) REFERENCES PROJECT.LOCATION (ID)
ERRORE alla riga 3:
ORA-01031: privilegi insufficienti
-- DIARY CAN SEE PROJECT.LOCATION BUT CAN'T REFERENCE IT
SQL> grant references on project.location to diary;
Concessione riuscita.
SQL> ALTER TABLE Diary.Diary
2 ADD CONSTRAINT FK_Diary_Has_LOCATION
3 FOREIGN KEY (LOCATION_ID) REFERENCES PROJECT.LOCATION (ID);
Tabella modificata.
-- NOW IT'S ALL OK!!Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2009/12/18/table-elimination-oppure-join-elimination-lottimizzatore-si-libera-della-zavorra/]

Programmatically create a relationship between two positions in HR

Hi,
I have a requirement to create relationships in HRP1001 between two given positions with a start and end date.
I need to write an upload program to do this but want to avoid Batch Input if possible.
Are there any relevant function modules that can do what transaction PP01 does?
Many Thanks
David

Hi,
Try using this code
LOOP AT T_MAINTAIN INTO WA_MAINTAIN.
    WA_MAINTAIN-FCODE = 'INSE'.
    WA_MAINTAIN-PLVAR = '01'.
    WA_MAINTAIN-ISTAT = '1'.
*Relate account to project
    IF WA_MAINTAIN-OTYPE = 'O' AND WA_MAINTAIN-SCLAS = 'O'.
      WA_MAINTAIN-RSIGN = 'B'.
      WA_MAINTAIN-RELAT = '002'.
*Relate position to project
    ELSEIF WA_MAINTAIN-OTYPE = 'O' AND WA_MAINTAIN-SCLAS = 'S'.
      WA_MAINTAIN-RSIGN = 'B'.
      WA_MAINTAIN-RELAT = '003'.
*Relate job to position
    ELSEIF WA_MAINTAIN-OTYPE = 'S' AND WA_MAINTAIN-SCLAS = 'C'.
      WA_MAINTAIN-RSIGN = 'B'.
      WA_MAINTAIN-RELAT = '007'.
*Relate employee to position
    ELSEIF WA_MAINTAIN-OTYPE = 'S' AND WA_MAINTAIN-SCLAS = 'P'.
      WA_MAINTAIN-RSIGN = 'A'.
      WA_MAINTAIN-RELAT = '008'.
    ENDIF.
*Relate position to position
    ELSEIF WA_MAINTAIN-OTYPE = 'S' AND WA_MAINTAIN-SCLAS = 'S'.
      WA_MAINTAIN-RSIGN = 'A'.
      WA_MAINTAIN-RELAT = '002'.
    ENDIF.
    WA_MAINTAIN-ENDDA = '99991231'.
*FM to create relationship
    CALL FUNCTION 'RH_RELATION_MAINTAIN'
      EXPORTING
        ACT_FCODE           = WA_MAINTAIN-FCODE
        ACT_PLVAR           = WA_MAINTAIN-PLVAR
        ACT_OTYPE           = WA_MAINTAIN-OTYPE
        ACT_OBJID           = WA_MAINTAIN-OBJID
        ACT_ISTAT           = WA_MAINTAIN-ISTAT
        ACT_RSIGN           = WA_MAINTAIN-RSIGN
        ACT_RELAT           = WA_MAINTAIN-RELAT
        ACT_SCLAS           = WA_MAINTAIN-SCLAS
        ACT_SOBID           = WA_MAINTAIN-SOBID
        ACT_BEGDA           = WA_MAINTAIN-BEGDA
        ACT_ENDDA           = WA_MAINTAIN-ENDDA
        ACT_PROZT           = WA_MAINTAIN-PROZT
      EXCEPTIONS
        MAINTAINANCE_FAILED = 1
        OTHERS              = 2.
    IF SY-SUBRC <> 0.
     WRITE : WA_INPUT-OBJID.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDLOOP.

Phantom Frame Appears Between Two Clips

I am new to FCP. When I play my video in the timeline, a phantom frame from another clip plays between two clips. I don't know if I accidentally placed one of the clips on top of it or something when I was moving clips, but I can't figure out how to get rid of it. I deleted the two videos one at a time to see which clip it was attached to, but the phantom frame played no matter which of the two I deleted. I also used the blade to cut the end of the first clip and the beginning of the other, but it still appeared. I therefore figure it must be between the two clips, but I can't find anything between them to select. Does anyone have any ideas? Thank you very much.
ETA; When I look closely, I think the black gap between the two clips is larger than the slight black gap between normal clips, so maybe that does indicate there's something there?

Artistry wrote:
ETA; When I look closely, I think the black gap between the two clips is larger than the slight black gap between normal clips, so maybe that does indicate there's something there?
Here is a shot of a time line where I have zoomed in as far as I can. At this level of zoom, a single frame can barely fit on my screen. If you maximize your zoom you should see only the thin line as shown between the partial frame on the right and the one on the left. If you see something more – either a gap or a clip with content – you should be able to select and delete it.
Russ

Create line extension between two SPA-3102

I`m having problems to create a line extension between two SPA-3102
I have one SPA-3102 connected to an analog PBX system with IP 192.168.0.201, and the other SPA-3102 with analog phone and IP 192.168.0.200
I succesfully setup them to make a call from the first to the second
But I couldn`t setup them to make a call from the second (192.168.0.200) and give me the dialtone of the PBX connected to the first SPA-3102 (192.168.0.201).
I could setup a hot line on the second SPA-3102 (192.168.0.200) and call to 192.168.0.201, but it doesn`t take the line to hear the pstn dialtone.
I saw many answers about this problem, but no one resolve the problem, i have the latest firmware. please, anyone could help me and if it`s possible to work please send me all the configuration needed.
Thanks again

Hi Jeremy,
I have a similar problem, I have one PSTN line (say Line1) with free minutes to mobiles, so its good for outgoing calls. The other line (say Line2) which i have is acually VoIP but it comes with its own hardware (magicJack if you have heard) so I can't use a SIP client and have to use the supplied Hw client, but it does give me an option to connect any normal phone to this magicJack (i suppose that would make it a fxs port). Now this magicJack is cheap for other people to call me.
I want to find a solution so that all the calls I receive on Line2 get forwarded to my mobile number via Line1. And if I receive any calls on Line1 they should be treated normally (my home phone rings). Do you have some idea how I can achieve this with minimal spend? Thanx
Atif

Create AlE Relationship between two company code F210 to FN21 (UHP To UPI)

Hi,
I want to know how to create ALE realtion ship between two company code ( F210 to FN21(Server name UHP to UPI ) and how to process it?
Please reply ASAP.
Regards,
Achin

Hi Sathish,
Thanks for reply!..
But My question I want to Add ALE relationship between two company code F210 to FN21 (UHP(Production server) To UPI(Third Party System)).
Regards!
Achin

How to create an relation between two block

Oracle forms 6i
Hai All
I have created a form in that i have four button ADD, QUERY, SAVE ,EXIT.
I have two block named Leader and members.
Four fields in leader block namely name , codeno, deptcode, unitid.
When i pressed query button and the cursor goes to name field in leader when i enter the name of leader and click
enter i gives the codeno, deptcode and unitid of the leader_name.
so now i have created another block in tabular structure to bring the members in the same deptcode that belongs to Leader_name.
So pls tell me the steps how to create the relation between these two blocks.
when i enter the leader_name and gives enter it needs to bring the codeno, deptcode, unitid and
I also need to gives the members in that deptcode..
Thanks In Advance
Srikkanth.M

If it is possible to create relationship with one table No.
Or
I have created a pre-Query in the detali block and my code is
set_block_property ('block_name', default_where, 'deptcode = (select deptcode from emplmaster where name like :block_in_which_leader_name.leader_name_field');BTW no need of joining here it can be solve by set the block's where clause as u said in ur earlier post above. Just changing the little bit this statement and then try.
If numeric
set_block_property ('block_name', default_where, 'deptcode = '||:block_in_which_leader_name.leader_name_field);
Otherwire
set_block_property ('block_name', default_where, 'deptcode = '''||:block_in_which_leader_name.leader_name_field||'''');-Ammad

How to create a View between two Ztables?

Hi experts,
I have two ztables TableA and TableB both has one common field.
Now Which type of view (Database,Maintanance,Projection or Help) I should create? If so what are the steps I should follow.
What I suppose to do in Table/Join Condition tab ,View Flds ,Selection Conditions and Maint stsus tab.
Reply with the detailed steps.
Thanks in Advance,
Dharani

Hi,
selection of view is depends on the type of requirement you have.
1. To create the view go to Se11
2. select the type of the view you required.
3.Enter the name of the two z table in the tables and click on the relation button so that it will automatically create the relationship between 2 table.
4. add the addition condition if required in the join condition.
5. In view field select the number of the field required to display in the view from both the table.
6. specify the selection criteria in the to select the values.
7. In maintenance tab select the appropriate option as per you requirement.
8. save and activate the view.

BI server generating query in a different way between two instances

Hi All,
We have executed a report in dev,test instances,BI server generated query in a different way in two instances where as dev BI server is on AIX operating system(recently we migrated from windows),test instance is on still on Windows environment.
For a report below are the queries
DEV(AIX)
WITH
SAWITH0 AS (select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end )
select distinct SAWITH0.c2 as c1,
SAWITH0.c3 as c2,
SAWITH0.c4 as c3,
SAWITH0.c5 as c4,
SAWITH0.c5 as c5,
SAWITH0.c6 as c6,
SAWITH0.c7 as c7,
SAWITH0.c1 as c8
from
SAWITH0
order by c1, c6
Test(Windows)
select distinct D1.c2 as c1,
D1.c3 as c2,
D1.c4 as c3,
D1.c5 as c4,
D1.c5 as c5,
D1.c6 as c6,
D1.c7 as c7,
D1.c1 as c8
from
(select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end
) D1
order by c1, c6
If we observe test query is very simple and easy to back track but in Dev it is appending like sawwith0,sawwith1 etc..looking difficult.
Is there in any configuration to change to generate query like Test(with out SAWWITH0).
NOTE:Any how results are same in both instances.
Please help me to resolve this issue.
Thank You,
Anil Kumar.

Anil,
Are your database settings the same in both of the rpds dev and test?
Check wether you didn't change anything to the default. Open your RDP double click on the Database in the physical layer and go to Feature you can check all the settings there
Adil

Create frames in-between two instances

Similar Messages

Maybe you are looking for