Create Functional Area via Job Architecture in Non-English language
Dear Experts,
We're running following environment.
- Windows Server 2003 Std SP2 64bit (32bit conversion completed)
- SAP ERP 6.0 EhP 4 Unicode system as back-end system for STVN
- STVN 2.1 SP1 with Japanese Language pack
- Language = Japanese and English
- TREX setting is not ready (will be ready soon)
The problem is we cannot create Functional Area via Job Architecture
if we log on Job Architecture module with JAPANESE.
(We can create Functional Area if we log on with ENGLISH)
[Procedure]
1. Launch Job Architecture module with Japanese
2. Job Architecture => Create Functional Area (under Tasks)
3. Key in [Title] and [Abbreviation], and then click [Add]
4. Error message "Not able to load DLL or CLASS" appears
I have already confirmed that if I do same thing with English,
Functional Area was created in ECC environment.
What settings am I missing?
Best Regards,
Masaya Iizumi
Dear Luke and Eugene
Thank you very much for the reply.
I have understood that it is known issue for .NET platform for 2.1 SP1.
I will communicate with Nakisa Support.
Again, thank you very much for your kind cooperation.
Best Regards,
Masaya
Similar Messages
-
Lack of World or Non-English language films and search filter in Australia
iTunes Australia doesn't have a search set up for World or Non-English language films in Australia whereas it does in US. Please fix and please also include more titles - very limited to the point of embarrassing Apple...
We are fellow users here on these forums, if you want to leave feedback for Apple then you can do so via this page : http://www.apple.com/feedback/itunesapp.html
In terms of the films that are available there, Apple can only sell the films that the studios/rights-holders have granted them licenses to sell there. You can try requesting that films be added, but unless the studios agree to it then Apple won't be able to add them : http://www.apple.com/feedback/itunes.html -
Handling Non English language characters in PDF output
Hi All,
We have a requirement wherein we have to display an existing Smartform output in a PDF format.
We have used OTF to PDF conversion and displayed the PDF output in a container.
The issue is if certain characters are of non english language then the PDF is displaying these characters as special symbols.
The following string is getting dispalyed in the SmartForm as follows:
ОРЕНБУРГАВТОРЕМСЕРВИС_
The same string is displayed as follows in the PDF form :
Any pointers on how to handle such cases would be highly appreciated.
Thanks in advance.
regards
Chaitanya
9703019495Before calling the smartform, use the FM 'SSF_GET_DEVICE_TYPE' and get the device type based on the language.
For eg:
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
i_language = l_langu
IMPORTING
e_devtype = lwa_output_options-tdprinter.
Then you need to build the other control parameters like this:
Build control parameters.
lwa_control_parameters-getotf = c_charx.
lwa_control_parameters-device = 'PRINTER'.
lwa_control_parameters-preview = ''.
lwa_control_parameters-no_dialog = c_charx.
lwa_output_options-tddest = 'LOCL'.
Pass this lwa_output_options & lwa_control_parameters to output_options & control_parameters respectively in the Smartform FM.
This should ideally solve this issue.
Regards,
Amirth -
Passwords in non-english languages
Hi all,
I have some passwords in non-english languages, but enter them in English layout. Looks like "FylhjblDHfpsKexit".
Standard keyboard doesn't display another language while it in English layout. How to enter such passwords?
Remake passwords in English - bad idea.Again: What language are you talking about?
It sounds to me like your passwords are in fact in Latin characters, but you want to enter them as if you were using some other language keyboard. I think the only way to do that would probably be to use a bluetooth keyboard.
You could ask Apple to add the feature you want via
http://www.apple.com/feedback
but I cannot imagine they would ever do so. -
Logon with non-English language LSMW donot display character
hi,When I Logon with non-english language ,
When I use LSMW ,
But the screen donot display character,
and in smlt , i setting supplementation language is english ,
who can help me ,thanks.Hi Benson,
Can you please elaborate on the issue. What characters are missing?
Regards.
Ruchit. -
Converting a given string to non-english language
{color:#0000ff}Hi can anybody help me how to convert an entered string in textfield to french or spanish or to anyother non-english language?{color}
Hi,
I don't think you get a language translator package.
What you can do is store the fraises, words in a database.
//SQL Code
CREATE TABLE [Language_Data]
[ID] INT NOT NULL IDENTITY PRIMARY KEY,
[Lang] VARCHAR(30) NOT NULL, //Lang English/French.....
[Type] CHAR(1) NOT NULL, //is Fraise or Word
[Words] VARCHAR(100) NOT NULL //Fraise or Word data
GO
CREATE TABLE [Translate]
[ID] INT NOT NULL IDENTITY PRIMARY KEY,
[FK_Orig] INT NOT NULL REFERENCES [Language_Data]([ID]), //ID of the original language
[FK_Trans] INT NOT NULL REFERENCES [Language_Data]([ID]) //ID's for all known translations
GO Create Stored procedures to add a new word/fraise to the [Language_Data] table,
Create a Stored Procedure to add a translation to the [Translate] table
Please note that to add a translation you will first insert into the [Language_Data] table then
insert the original's ID and the translation ID to the [Translate] table Also make prevision for backwards translation -
How can build help file for right to left and non english language
hi erverybody, i have a big problem ,please help me
i creat a c# appliction with vs.net2005 and i want to write
help file for it .i need a software to creat help file for non
english language(such as persian or arabic) and right to left
support . i tried many helpware chm builder tools but each of them
made a problem .i dont know what to do .what is the best solution
for creating help files for right to left and non english languages
how can i build my help file with f1 helping ability .thank u
so much
TextHi Mr_Sia and welcome to the RH community.
You could try looking at the HAT Matrix. This is a comparison
of all the help tools around. Click
here to go to it.
RoboHelp itself, whilst it does support over 35 different languages
does not support Persian or Arabic. -
I am getting emails in a foreign (non-english) language?
I am receiving emails in a non-english language. I guess I must have pressed something during installation and/or startup. This is not a wish to choose a language to open web pages with it is the language with which Mozilla is attempting to communicate with me.
This is not my problem; the emails are from Mozilla.
I tried the previous suggestion and it looks like its going to work but at the end it pops up a screen that says "How Embarrassing". I says the problem could be caused by an open web sight or to set up a completely new session, which doesn't work either. -
Customer conversion for non-english language
Hi:
We have a requirement to convert customer data from lagacy system to Oracle EBS supporting English and Non-English languages. Our conversion programs for english is working fine but we are not sure about the approach for other language converions. Can anyboody share the knowledge if faced similar requirements?
Thanks /SantanuI believe your conversion programs should work regardless of the language the data is stored in, as long as the database and Apps use UTF8 characterset. To the code, data is data, whether it is in English or in another language. Your approach should be to test your conversion programs in test instances and tweak them as necessary. Are there specific concerns you have with using data in other languages ?
Srini -
Customer conversion for Non-English languages
Hi:
We have a requirement to convert customer data from lagacy system to Oracle EBS supporting English and Non-English languages. Our conversion programs for english is working fine but we are not sure about the approach for other language converions. Can anyboody share the knowledge if faced similar requirements?
Thanks /SantanuDuplicate thread (please post only once) ...
Customer conversion for non-english language
Re: Customer conversion for non-english language -
Does Active Directory Support Non English Languages?
Hi,
I want to know that does Active Directory Support Non English Languages like japanes, Arabian?
I think we can have domain name in non english languages also. How active directory handles it.
Sandeep GuptaThis actually isn't controlled by Active Directory but by the core operating system and its language packs.
Server 2012
http://www.microsoft.com/oem/en/installation/downloads/Pages/Windows-Server-2012-Language-Packs.aspx?mtag=TW-P-S12#fbid=CPJWmInHH14
Server 2008 R2
http://www.microsoft.com/en-us/download/details.aspx?id=1246
Server 2008
http://www.microsoft.com/en-us/download/details.aspx?id=22681
Paul Bergson
MVP - Directory Services MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs
http://blogs.dirteam.com/blogs/paulbergson < br> Please no e-mails, any questions should be posted in the NewsGroup. This posting is provided AS IS with no warranties, and confers no rights. -
Functional Areas and Job families maintenance - EhP 4
Hi all,
I've read in an older SAP doc that Job Families and Functional Areas are only maintanable through the Talent Management Specialist in the Enterprise portal. I remember that maintaing JFs in the the backend caused some issues in EhP 3.
I wonder if this is still the case in Enhancement Package 4.
Is is possible to maintain the FN and JF objects through the backend i.e. PP01? Or are these objects still intended for use strictly with the Talent Management Specialist in the portal?
If anyone could point me to the newest documentation on this subject or has the answer to this that would be great.
Thank you!Hi Jean-Philippe:
It is indeed possible to maintain FN and JF in PP01. SAP has also included HRTMC_PPOM (as well as HRTMC_PPOS & HRTMC_PPOC) as equivalents to PPOME for working with these objects and other TM objects/relationships.
These links might be what you're looking for:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/2e/5d2dd5ceaf4b60bc5207ebe0a197bd/content.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/54/d538245361489f82ed6c39110ba020/content.htm
Note in that 2nd link, SAP basically says if you want a more 'graphic' interface, then you can use certain Nakisa submodules.
Hope that helps.
Thanks,
Chris
Edited for typos by: Chris McNarney on Jan 15, 2010 11:16 PM -
Sapscript translated in non-english language - Garbled output as Email
Hi Experts,
I've translated a SAPscript to Chinese and Thai language.
As per my requirement, the output can either be printed, emailed or faxed.
I'm using the standard include RVADOPFO for Open form.
For the english version, I'm able to recieve the properly formatted e-mail output.
However in case of thai and chinese, the Thai and Chinese characters do not appear. Most of them are substituted with blank spaces and some are substituted with boxes and unknown characters. However, the numbers and english characters appear.
Please help in getting the correct output.
Thanks!
Nitya.Hi,
SAP 141343. PDF Conversion: Latin-2.
SAP 141901. Customer-specific fonts for PDF conversion.
SAP 163266. PDF conversion: character set for softfonts.
SAP 171698. SAPconnect: Formats, conversion, device type.
SAP 317851. Creating PDF format via spooler in 4.6C/4.6B/4.5B.
SAP 322998. PDF conversion: Cyrillic support.
SAP 323736. Restrictions with "PDF print" through spooler.
SAP 398357. PDF converter: Width of letters is incorrect.
SAP 414325. SAPconnect: Conversion of ALI to PDF.
SAP 504952. Composite note spool and print.
Find these notes, there You'll find some answers.
Regards,
Nisrin. -
Dear All,
Kindly suggest how to submit request with default language as 'American English' in other language sessions (Ex: Arabic).
R12: 12.1.3
The issue is we created function using 'arabic' text in it, which runs perfect in the english session, but doesnt gets value in the arabic session.
So we decided to make the submit request with default language as 'American English'.
Below is the function. Kindly note that SEGMENT1 is not linked to any valueset.
CREATE OR REPLACE FUNCTION F_GET_OLD_LEAVE(P_PERSON_ID NUMBER)
RETURN NUMBER IS
V_DAYS NUMBER;
BEGIN
select
SUM(EXCD_DAYS)
INTO V_DAYS
FROM (
SELECT
-- NVL(SEGMENT5, 'تجاوز') Late_type,
-- SEGMENT1 NOTES,
-- ACTUAL_TERMINATION_DATE,
(CASE
WHEN NVL(SEGMENT5,'تجاوز') not in ( 'تجاوز' ,'إجازة غير مدفوعة') and segment1 not in ('إجازة غير مدفوعة') THEN 0
--WHEN SEGMENT1 like 'إجازة غير مدفوعة' THEN
--TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
--TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') +1
when segment1 not in('بدل نقدي','إجازة غير مدفوعة') and segment4 is null then
TRUNC(to_date(ACTUAL_TERMINATION_DATE,'DD/MM/RRRR'))- TO_DATE(to_date(SUBSTR(segment3, 1, 10),'DD/MM/YYYY'), 'DD/MM/RRRR')-1
when segment1 in('إجازة غير مدفوعة') and segment4 is null then
TRUNC(to_date(ACTUAL_TERMINATION_DATE,'DD/MM/RRRR'))- TO_DATE(to_date(SUBSTR(segment2, 1, 10),'DD/MM/YYYY'), 'DD/MM/RRRR')
WHEN SEGMENT1 <> 'إجازة غير مدفوعة' and
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') <
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')
THEN 0
WHEN SEGMENT1 <> 'إجازة غير مدفوعة' and
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') <=1
THEN 0
WHEN SEGMENT1 like '%بدل نقدي%' then 0
-- TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')
WHEN SEGMENT1 like '%إجازة سنوية%' and segment5 in( 'إجازة غير مدفوعة','تجاوز')and
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') >=2
then
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -1
WHEN SEGMENT1 like '%إجازة حج%' and segment5 in('إجازة غير مدفوعة','تجاوز') and
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') >=2
then
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -1
when SEGMENT1 LIKE '%إجازة غير مدفوعة%' AND
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')<=1
THEN
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')
when SEGMENT1 LIKE '%إجازة غير مدفوعة%' AND SEGMENT5 NOT IN('تجاوز','إجازة غير مدفوعة') AND
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')>=2
THEN
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')+1
when SEGMENT1 LIKE '%إجازة غير مدفوعة%' AND SEGMENT5 IN('تجاوز','إجازة غير مدفوعة') AND
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')>=2
THEN
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')
WHEN
EXTRACT(YEAR FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) <>
EXTRACT(YEAR FROM TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))
THEN
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'),'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'),'DD/MM/RRRR') - 2
WHEN
to_char(to_date(SUBSTR(SEGMENT3, 1, 10),'YYYY/MM/DD'),'DD/MM/YYYY') =
to_char(to_date(SUBSTR(SEGMENT4, 1, 10),'YYYY/MM/DD'),'DD/MM/YYYY')
THEN 0
WHEN
EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))= 31
THEN
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')-1
--------------------------------------------when enddate is NULL---------------------------------------------------------------------------------
-- WHEN segment3 IS NULL THEN round(TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'),'DD/MM/RRRR') -
-- TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'),'DD/MM/RRRR'))
WHEN segment3 IS NULL THEN ((EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))) * 30) +
(EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')))
-----***********************************when segment1**********************************--------------------------
WHEN SEGMENT1 like '%صادف%' THEN ((EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))) * 0) +
(EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')))
WHEN
EXTRACT(YEAR FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) =
EXTRACT(YEAR FROM TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))
THEN
((EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))) * 30) +
(EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')))-1
ELSE 0
END )EXCD_DAYS
FROM HR.PER_ANALYSIS_CRITERIA C,
PER_ALL_PEOPLE_F PPF,
PER_PERIODS_OF_SERVICE PPPS,
PER_PERSON_ANALYSES T ,
fnd_id_flex_structures_vl f
WHERE 1 = 1
AND T.ANALYSIS_CRITERIA_ID = C.ANALYSIS_CRITERIA_ID
AND PPF.PERSON_ID = T.PERSON_ID
and ppps.PERSON_ID=ppf.person_id(+)
and ppps.ACTUAL_TERMINATION_DATE BETWEEN ppf.effective_start_date and nvl(ppf.effective_end_date, to_date('31/12/4712', 'DD/MM/YYYY'))
-- AND C.ID_FLEX_NUM = 50318
and c.id_flex_num = f.id_flex_num
AND f.id_flex_code = 'PEA'
and f.ID_FLEX_STRUCTURE_NAME = 'XX_Old_Leave_Details'
AND PPF.person_id = P_PERSON_ID
AND T.DATE_FROM>=( select
TO_DATE(to_date(SUBSTR(xx.global_value, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')
FROM
ff_globals_f xx
where xx.GLOBAL_NAME='XX_NEW_LEAVES_DATE_FROM'
AND SYSDATE BETWEEN XX.EFFECTIVE_START_DATE AND XX.EFFECTIVE_END_DATE)
and substr(c.segment1,1,10)>=
select substr(xx.global_value,1,10)
FROM
ff_globals_f xx
where xx.GLOBAL_NAME='XX_NEW_LEAVES_STD'
AND SYSDATE BETWEEN XX.EFFECTIVE_START_DATE AND XX.EFFECTIVE_END_DATE
RETURN NVL(V_DAYS, 0);
EXCEPTION
WHEN OTHERS THEN
RETURN 0;
END;
Thanks in Advance.
Regards,
Afzal.Dear All,
I found the solution for the above function.
In the same function I removed the static arabic values replacing with code values from the value set.
In my scenario there is a value set where some of these values exists, and other we can add there.
Kindly let me know if someone was successful by using the arabic text in the coding and defaulting the language in conc prog as English.
Thanks a lot.
Regards,
Afzal. -
Cfqueryparam and non-English languages
Hi,
I want to store non-English characters in NCHAR NVARCHAR and
NTEXT field types.
In the examples below fields LastName and FirstName are
NVARCHAR type and
Comments is NTEXT
In the past when I wanted to store non English (Greek)
strings or texts in these field types I was writting
<!-------------->
<cfquery name="Q" datasource="Db">
INSERT INTO Books
( LastName,
FirstName,
Comments )
VALUES
( N '#var_LastName#' ,
N '#var_FirstName#' ,
N '#var_Comments#' )
</cfquery>
<!-------------->
Now I want to use the cfqueryparam, so the syntax is
<!-------------->
<cfquery name="Q" datasource="Db">
INSERT INTO Books
( LastName,
FirstName,
Comments )
VALUES
( <cfqueryparam value="#var_LastName#"
cfsqltype="CF_SQL_VARCHAR" MaxLength="40">,
<cfqueryparam value="#var_FirstName#"
cfsqltype="CF_SQL_VARCHAR" MaxLength="30">,
<cfqueryparam value="#var_Comments#"
cfsqltype="CF_SQL_LONGVARCHAR"> )
</cfquery>
<!-------------->
but ...... the non English characters are not stored
correctly.
So my question is
How can I use the cfqueryparam in order to store non English
characters in NCHAR NVARCHAR and NTEXT field types ???
The documentation has not any info on that.
Thank you in advance for your help
ANX
GreeceYou didn't say what version of CF you were using.
Also, which database driver are you using (ODBC or JDBC
version #)?
Anyway, it looks like you do not have the unicode support
turned on. See
http://www.sustainablegis.com/blog/cfg11n/index.cfm?mode=entry&entry=F9553D86-20ED-7DEE-2A 913AFD8651643F,
etc.
If that doesn't help, post
sample data that inserts ok without cfparam but not ok with
cfparam.
Maybe you are looking for
-
VOID watermark in Adobe PDF form
Hi Gurus, Do you know that is there any way to place a watermark like VOID in smartforms in Abobe PDF forms, in order to display VOID in the QA system, but display without this watermark the forms in the production system? Thanks in forward for your
-
"loopback" counter output without wiring
Cross posted from another forum for more visibility: Basically, I have a counter output being generated on a trigger line. It's just a pulse at defined intervals of 1 hz. The problem is, the card that is generating the output needs the trigger itself
-
Hey everybody, Photoshop has encountered a problem with the display driver, and has temporary disabled enhancements which use the graphics hardware. Graphics hardware enhancements can be enabled in the performance panel of preferences. ``performa
-
Hello All, We use a web service for a business process. The issue is it works some time and it throws IE error most of the times. The error information is as follows: Line: 172 Char: 3 Error:'HTMLB_SECTION508' is undefined Code: 0 URL: ttps://hostnam
-
Mavericks won't auto capitalize "I" on system level.
Hi there. I just upgraded to a new machine and installed Mavericks on it. My issue is that while typing, Mavericks won't auto capitalize the letter "I" even with the "Correct Spelling Automatically" and text replacement options enabled. I am NOT usin