Create HTML in Document Maintenance (SE61)

Hi there,
I am having difficulty trying to create URL link in my document using SE61. If i type "http://.....", it will display as hypertext url link in my document. But if i have a long url, the hypertext will not be correctly displayed, as the text will be broken up.
Anyone knows how to create a url link or create HTML tags using SE61 (Document Maintenance)? Thx
Zul

Hi Mohamed,
I think your question is not ITS related and the chances to get an answer in this forum are not high.
I don't know the answer to your question and would suggest that you consult the BC-Documentation in Knowledge Warehouse. If you want I can move this thread to another forum.
Best regards,
Henning

Similar Messages

How to Create Test Sequence Document in HTML using command line

How to Create Test Sequence Document in HTML using command line
I have lot of sequences and I want to create Test Sequence Documentation in HTML format using Command Line automatically, is there a way to automate this task using .bat file or using C# .Net

If you aren't able to figure out how to call a C++ DLL in .net then there may be another option. Unfortunately I don't know how to do this off the top of my head and I don't have an example.
The other option would be to change docgen.seq a little bit to the dialog doesn't display and you just hardcode the options. Then you can use a command line to call testexec.exe: http://zone.ni.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/startup_opt/
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Create an XML document from a HTML form???

Good morning, is it possible to create an XML document from a HTML form
if yes, can someone tell me how to proceed exactely, I would be very thankful!

Hi,
A very simple intro at this link. Apologies for anything unclear.
http://cswww.essex.ac.uk/TechnicalGroup/TechnicalHelp/xmlCreate.htm
best
kev

Creating HTML document in Mountain Lion

I am trying to convert completely over to Mountain Lion. One important issue remaining is being able to create an HTML file from a document. I used Appleworks a lot because it allowed me to save anything I created as an HTML page. How can I do something similar in Mountain Lion? Pages won't
allow me to do it. I heard old version of Pages would do it, but that won't help.
I suppose I can buy some editor or converter, but seems such a waste to pay for something that an old version of Appleworks would do so easily and
perfectly for free. There must be a simple solution to create HTML from a word ( not Word ) document.

Follow this link http://forums.macrumors.com/showthread.php?t=1413326

Error message in Adobe Pdf in printer device panel when trying to create a pdf document. I have CS3

Error message in Adobe Pdf in printer device panel when trying to create a pdf document. I have CS3 Web Premium with Acrobat Professional 8. I use it fine on my old computer with Windows XP. I recently got a new laptop with Windows 7. I installed all my Adobe programs, and I think they are working. When I look at Adobe PDF in the device section of the Control Panel it looks okay. But when I try to print a Word, Photoshop, or HTML page in PDF, nothing happens. I have tried printing both as File>print and using the PDF tab on the top menu bar. I look at the device in the control panel and it has the yellow error warning symbol and suggests trying to troubleshoot. I look at the document list and it says status "error". When I try troubleshooting Windows suggests doing some Home Sharing and also suggests canceling the document I'm trying to print. I tried re-installing just Acrobat 8 from CS3 (and have to use Photoshop CS4 disk for shared documents I guess). I ran into a can't locate adobepdf_dll file, so did a web search on this issue and found a suggestion that I find and use the adobepdf_dll_64 file and may have to (I did have to) remove the "_64" for it to work. I think I successfully reinstalled using that dll file- no errors came up anyway. But still when I try printing/converting a photoshop, webpage, or word document into pdf, the pdf device in control panel still gives the error status on the document and gives the same troubleshooting advice. Help?

I just compared the properties between the two computers. On the old computer it has the port as "My Documents/*.pdf". On my new computer it lists the port as "LPT1". I tried changing the port to "Print as File", but when I try printing a photoshop picture as pdf, I get a "Access Denied". I then tried to create a new port on the device control panel. I tried to create a local port "My Documents/*.pdf" port but was denied. I ten tried to create a new port type and control panel asked for an INF file. I wonder if this is where my problem lies. Thoughts?

Creating a new document using XQuery

Hello everyone,
I wondered if there was a way to create a new document using XQuery. What I am trying to do is to run a query on XML file and try to print the results in HTML for viewing purpose.
The HTML is spitted out on DOS prompt. Instead I wanted to write that HTML to a file on disk. Is this possible with the XQuery tools provided by Oracle?
Thanks in advance for all the help
K

Folks,
Kinda answering to my question. Just send the DOS output to some file. Pretty Simple huh!
Thankyou anyways
K

How to Create a PDF Document and apply Digital Signature in C# using the Adobe SDK?

Hi Everybody!
I have to do two distinct tasks here:
1) How can I create a PDF document using the Adobe SDK in my .NET Applications(C# - 2.0)?
I just need a basic sample to create a document with a simple text, for example. I did not find any useful information in the adobe documentation. I have the Acrobat Professional 8.0 in my computer, but it's very dificult to work whith de Acrobat.dll and .NET with a poor documentaion.
2)How can I apply digital signature in a existent pdf document?
I need to sign documents using the SDK, just a basic sample in c# would be helpful to start!
Anybody could help?
Thank in advance!

Leonard Rosenthol or anybody that can help, sorry to insist.
I will explain better my problem:
I have an ASP.NET WebPAge (C# - 2.0). In this page, the user make a request. The request should generate a PDF document with the informations of the request and with a field to add a digital signature. The document created will be send to a approver that will confirm the approval applying his digital signature (I need to do too, a webpage where the approver open the page, choose the pdf document, and sign, just selecting his own certificate and clicking in the button SIGN... but this is another problem).
That's the reason that I have to create a PDF document. If I create a WORD or HTML document, and then convert to PDF, how can I add a field to digital signature in this pdf document?
Is there any solution using Acrobat SDK?
Thank you very much!

How to use ora:processXSLT to create HTML with BR tags included?

I am using a .xsl to create HTML for use as part of a notification process. The issue is that if in the .xsl I include the
tag, when the transform engine runs to make the HTML it creates tags with out the maching tags. (in doing some reading this seems to be a feature of most XSLT engines) But the result is invalid XML, so when I attempt to assign the output to a variable the process faults and I get the following error:
XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:processXSLT("XML_PURCHASE_ORDER_to_HTML.xsl", bpws:getVariableData("inputVariable", "payload", "/ns1:XML_PURCHASE_ORDER"))", the reason is The XML data is invalid.
The XML data is invalid; the reason is "Error on line 100 of document : The element type "br" must be terminated by the matching end-tag "
". Nested exception: The element type "br" must be terminated by the matching end-tag "
Message was edited by:
mlutze
Message was edited by:
mlutze
Message was edited by:
mlutze

You can probably set the output format in the stylesheet, like:
<xsl:output method="txt" indent="no" omit-xml-declaration="yes" />
if you really don't want to use xhtml. The result might have to be wraped in a cdata block in the bpel flow?
cheers
/Stig

Create a new document with settings appropriate for SWF or XFL output.

I'm studying up for the CS4 ACE exam, and I'm stumped on something. In the "Laying out a Document" section, it says: "Create a new document with settings appropriate for SWF or XFL output." There isn't really anything specific to creating a document for flash, except that you wouldn't add bleed. I can't find anything online that addresses this. Am I missing something here? Any document can be exported to SWF or XFL. This seems rather ambiguous. What is there to know about this?

You're right that any document can be exported to SWF or XFL. I'm not sure what you're going to be asked on the ACE exam, but here are some resources:
Help topic:
http://help.adobe.com/en_US/InDesign/6.0/WS2DECDF40-B6DA-40b6-804F-2703D6C6A460.html
Tim Cole's first of 3-part series:
http://blogs.adobe.com/indesignchannel/2008/11/indesign_2_flash_part_i_1.html
My blog entry:
http://blogs.adobe.com/indesigndocs/2009/03/exporting_interactive_indesign.html

How to Create HTML page from portal

Hi
I have a requirement to create html pages from portal.
There will be an author who can choose document type as HTML
and then he will write html codes on saving it should be saved as HTML doc in UCM.
and publisher should be able to display it on portal(may be using content presenter).
please help me in this. I know there is rich text editor task flow which can save a doc as doc file.
and in spaces we have option of creating HTLM file but i don't know how to do it for my portal.
Thanks

A better way would be to create the page using approach in this blog:
https://blogs.oracle.com/ATEAM_WEBCENTER/entry/content_presenter_cmis_complete
That way the page can be edited inline and the html author need not upload html to ucm everytime.

How to Create Free PDF document?

Hi,
I do not have adobe pdf writer. I need to create a word document into a secure pdf document. Please let me know if there is any way to create a pdf free?
Thanks
Ahmad

From: <[email protected]> | Hi, | I do not have adobe pdf writer. I need to create a word document into a secure pdf | document. Please let me know if there is any way to create a pdf free? | Thanks | Ahmad PDFCreator on SourceForge http://sourceforge.net/projects/pdfcreator/ -- Dave http://www.claymania.com/removal-trojan-adware.html Multi-AV - http://www.pctipp.ch/downloads/dl/35905.asp

Error while using BAPI to create Goods Receipt Document

Hello All,
While using the bapi BAPI_GOODSMVT_CREATE to create Goods receipt document ,the following error is encountered:-
Error Message:FOR OBJECT XABBELEGNR,NUMBER RANGE INTERVAL DOES NOT EXIST OM36.
Do we need to create a number range object ??If yes,how and where to create ?
Thanks,
Deepti.

Hi Deepti!
There is only a valid interval missing, not the whole object.
Maintenance can be done via transaction SNRO, enter your object XABBELEGNR in entry screen. (Alternatively use transaction OMJ6).
Push button 'Number Ranges' and 'Change Intervals'. Here you can define an interval.
Regards,
Christian

Creating a new document in Finder with right-click--How?

Is there a way to create a new document in a Finder folder by right-clicking (or Ctrl-left)? So that the new file will be created at that very spot, in that very folder.
In Windows-Explorer this was quick and easy. Just right-click and you could choose from a menu to create a new empty doc of the most popular (installed) programs. Text file was mandatory. The file was created where the curser was at. VERY handy as that way you didn't have to open the application, create a new doc and then when saving having to crawl your way all the way to the position in the Explorer/ Finder.
Since I started with Apple and Tiger I've been missing this feature and Snow Leopard still does not seem to have it. Or did I miss something? I checked all the menue as well. There's not even a "Create new document". Only a "Create new folder".
I was just reminded of this when I wanted to create a new file on an external drive on a server to save some text in it. There was no way other than first opening Textedit, saving the empty file on the local Mac, THEN transferring the empty file to the server. Only THEN I could open it and edit it.
There MUST be a quicker way.
Also, in Windows you could edit this list in the menu (and add programs that would not by themselves do this). Is there a way for the Mac?
Cheers,
Jay

I might have just found a solution myself:
https://discussions.apple.com/message/10432377?messageID=10432377&amp%3b#1043237 7
It seems other people are wondering too.
And for those of you who don't understand why this is useful: Try it.
Open Textedit, Apple-N, and then save the darned file somewhere deep in the labyrinth of the Finder where you've just been but withouth the file. It takes AGES.
I, on the other hand -- at least in Windows --, right-click, new, double-click AAAND I'm on editing the file.
VERY quick.
It's beyond me why this is not possible on a Mac.

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

Creating follow-up document in actions

Hello all,
 I need to create a followup document in actions with specific process_type (transaction type) and channel type (category example: in-call , email..)
 Now, I am able to pass my transaction type as an import parameter but not the channel type. Does anyone know how to create followup document with specific transaction type and channel type.
thanks in advance
ark

Hi Ark,
you can copy the BAdI implementation COPY_DOCUMENT. In action customizing assign your copied implementation (don't forget to activate it) in the processing details of you action. There you will also find a button for maintaining processing parameters. Add one parameter for the transaction type and one for your channel type and set the values for them.
In the BAdI implementation add the following parameter:
data: lv_new_header type crmt_object_guid.
copy document
CALL METHOD lc_action_execute->copy_document
 EXPORTING
 io_appl_object = io_appl_object
 ip_application_log = ip_application_log
 ip_action = ip_action
 ip_preview = ip_preview
 ii_container = ii_container
 iv_actiontext = lv_actiontext
 IMPORTING
 EV_NEW_HEADER_GUID = lv_new_header <==========
 rp_status = rp_status.
Now you have the GUID of the copied document. The table lt_container contains your channel type. Read it out of the internal table and then call the function module crm_order_maintain in order to set the channel type.
Hope you are a bit familiar with crm programming, otherwise this might become sligthly complicated.
Cheers, Ralf

Create HTML in Document Maintenance (SE61)

Similar Messages

Maybe you are looking for