Create IDOC for alternative unit of measure

Hello,
I need to send the alternative UoM via an IDOC. My problem is that i do not know how to manually send the UNIMA2 IDOC.
Like when i send MATMAS, i use BD10. Is there any program or transaction for sending UNIMA2?
Thank you

The data is already contained in MATMAS03.
So no need to have another IDOC type.

Similar Messages

Table for alternative unit of measure

HI
I have created a material whose Basic UOM is Kg
I have maintained alternative unit of measure as TON and maintained the relationship 1 ton = 1000 Kg in material master -- additional data -
units of measure.
I want to capture the data for creation of report ....In which table this data is stored ?
Thanks
Sara

MARM

Adding Alternative Unit of Measure to Outbound idoc

Hi gurus,
I need to add alternative unit of measure information to an outbound ORDERS idoc for each line item segment. How do I know what segments and qualifiers to use?
Thanks!
Will

Hi Will
Unit of measure at item level is in
Segment --> E1EDP01 : IDoc: Document Item General Data
Field --> MENEE : Unit of measure
Do you want to convert the Unit of measure in outbound idoc?
Use conversion rules for this...
or
do you want send Unit of measure and secondary unit of measure ??
extend the idoc type and write user exit to populate date in extended segment...
i hope above info helps you
Thanks
RAMESH

Alternative unit of Measure for variant material

Dear All,
Here is an interesting scenario,
There is a naterial Billet with two variant characteristics length and size. and base unit of measure is TON. Now alternative unit of measure is PCS. How can define the conversion factor on the basis of these two variant characteristics.
In normal material (without variant char.)
we can define conversion factor 1PCS= 2TON
For variant material,
For the material Billet with variant charc length and size how can i define conversion
so that system calculates diff. PCS with diff. length and size but material is same. So how can i Do that.
for example for same material Billet but variant char. Length is 6 M and size is 120*120 ,its wt will be 2 TON for 1 PCS.
for the same material Billet with variant char. length 12 M and size 120*120, its wt will be 12TON for 1 PCS.
How can i cater this for the same material.

Hi Shoaib,
We have faced the similar scenario for steel industry. Based on my experience, it is not possible to define variable values for Alternative UOM conversion with the variant characteristic/configuration, specially if you want SAP to maintain inventory with variable conversion rate.
Use the Batch specific unit of measure for this situation.
1) Create batch specific UOM i.e. Ton_per_pc (TOP) --- User proportional unit conversion
2) Create batch characteristic ton_per_pc and assigned UOm.
3) In material master additonal data select proportion unit and enter the standard conversion rate between ton & pcs.
4) While doing GR - In batch creation you can enter whatever the conversion rate is and Inventory will be updated accordingly.
Regards,
Ravi.

SPRO path for maintaining basic and alternative unit of measure.

HI ,
Please tell me path in SPRO where we maintain basic and alternative unit of measure. If it is not in SPRO ,please suggect where to create new or delete old unit of measure.
Waiting for your reply.
Thanks
Rohit

Setting up new units can be done in transaction CUNI
If you want change units in a certain material, then do it in MM02, click button alternative data, then goto the units tab

How to make system consider Alternative unit of measure while creating BOM?

Dear Experts,
When creating a BOM, how do I make the system consider the alternative unit of measure if at the point of creating the BOM, I decide to use the component material alternative unit of measure? The scenario is as follows:
Header
Material code is TK677, Base Unit of Measure is Litres.
Components:
Material code is RT677, Base Unit of measure is Litres.
Material code is RV677, Base Unit of measure is Kilogram.
When formulation is done in the laboratory, the components are weighed and measured in percentage weight. For example, 20% for first component (RT677) and 80% (RV677) for the second component.
To depict this, I maintain an alternative unit of measure of Kg in the Material Master of RT677, and maintain the conversion factor (100kg = 116Litres) so as to enable me use Kg as unit of measure for material RT677 when creating the BOM.
When creating the BOM, I enter Kg as unit of measure for material RT677, but gets the system error message ''Unit of measure KG not supported for material RT677 in plant NG00
Message no. 29175''
What do i need to do as I have already maintained Kg as alternative unit of measure? or which other better way should i handle this issue?

Thanks a lot for your reply, it worked, it allowed me to create the BOM using Kg for component RT677. But the new challenge i am now facing is that when I try to create a process order copyiing this BOM, it gives me the same unit (Kg) for component RT677 whose base unit of measure is Litres.
I actually want the process order to copy the BOM and use Litres for component RT677 based on the conversion factor which I have maintained in the Additional Data window of the material master.
The reason is that, the formulation done in the lab is measured in percentage weight, but this component weight is now scaled up to Litres when the component is pumped into the Blending Vessels as specified in their Blending Instruction.
Please how do I ensure that when the master recipe is copied during creation of the Process Order, that the unit of measure will be the base unit of measure (Litres) despite the fact that I have used the alternative unit of measure (Kg) for this component during creation of the BOM.
Thanks

No alternative unit of measure specified, during creation of sales order

Dear Experts,
when user is creating sales order, User is getting the error message no. MM108 "No alternative unit of measure specified" for particular material.
we have checked the alternative unit of measure it is already maintiained in the material master.
we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
can you provide the exact reason and solution to over come this please .
Thanks in advance.
Regards,
Suresh Veerepalli

Dear Experts,
The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
X                  AUn               Measuremt unit text           Y                   BUn               Measuremt unit text
1     L     l     <=>     1     L     l
1.121     KG     kg     <=>     1.000     L     l
1     PCE     Piece     <=>     1     L     l
1     BDL     Bundle     <=>     12     L     l
1     PAL     Pallet     <=>     720     L     l
Error is gettting when creation of Sales Order ,Order is standard order.
When we double click on error message the following details are shown.
1.No alternative unit of measure specified
message no:MM108
2.Diagnosis:
   This alternative unit of measure is missing.
3.System response :
   The system cannot carry out conversion
4.Prodedure:
This is due to Program error that should not occur.
Please provide the exact solution on this issuse.
Thanks

Adding Alternative Unit of measure as part of attributte of material

Hi gurus,
In our source system each material has alternative unit of measure which contain info on converting the base unit of measure (CAR) to MT and PAL.
I need to add this info as part of material attribute
e.g.
Material "A" 10CART = 1 PAL & 100CART = 1MT
This information captured in MM table "MARM" with material code as the
As part of 0MATERIAL_ATTR , i need to have additional field that capture the info as below
CARTPAL = 0.1 (1/10)
CARTMT = 0.01 (1/100)
Please help to advice on how to enhance the extractor to cater the above requirement.
Your help highly appreciated
Thank you

hi,
According to me you can enhance the 0Material_attr to bring the required information from ECC.
But before enhancing anything ask func consultant or business below ques.
1) will these unit entry will get created in MARM for any material at the creation of material or it will get updated later on
2) will this unit value get change for any material during its entire life
If any of above que ans is yes then how wud u manage in transaction data if unit get changed.
For that u need to apply feedback concept in transaction dso.
Regards,
Ashish

COPA reports - Quantity in alternative Unit of Measure

Hi all
My clients requirement is to dispaly quantities in both base UoM and alternative UoM in COPA reports. Alternative unit of measure and the conversion factor is maintained in the additional data of material master. After reading through several forums and documentation, i understand that this can be achieved using COPA enhancement COPA0005.
I am thinking of creating new value field to store the quantity in alternative UoM and to calculate the required quantity using the conversion factors in MARM table.
But I have a few questions regading the same.
1. There are 2 function modules EXIT_SAPLKEII_001 and EXIT_SAPLKEII_002. Which one should i be using for my purpose?
2. Should enchanement COPA0003 be actived first to make COPA0005 active?
3. Is any other configuration required apart from created in new value field for quantity in alternative UoM.
Thanks
Vamsi
Edited by: VamsiM on Mar 17, 2011 7:21 PM

Thanks Ajay for ur reply.
When I created the quantity value field (say VVXXX), added it to Op. Concern and regenerated the structure; the system itself created the quantity unit field VVXXX_ME for alt UoM. This field is also added to field catalougue and is also readily avialable for used in KE30. So I didn't have to create a new Characteristic.
In my case, the alternative UoM is not the same and depends on the material.

Issue in Alternative unit of measure (MARM) update using MM17

Hi,
I have tried to update alternative unit of measure (MARM) for some materials using MM17.
It is working for some unit of measures (Like FT).
But if I try to changes the unit of Measure value for PLB (Counter & Denominator) or DLB it is changing for UNC, if UNC unit of measure is not there for that material then the UNC is getting created.
But according to MM17 functionality I think PLB values should change.
Please check and let me, if you have any solution or any one faced the same issue.
Thanks
sham.

Hi Sham,
Your problem could be caused by wrongly assigned ISO codes to the unit of measures involved. Most probably to these unit of measures   the same ISO code is assigned. This leads then to problems in the ALE interface of the material master, which is used too by the mass maintenance transaction MM17.
There only the ISO-code is given and then the System doesn't know the correct unit of measure, which
should be used. So it is possible, that the change is done for a wrong unit of measure.
Please check for this your customizing in transaction CUNI.
Regards
Mauro

TLB-STO in alternative unit of measure

Hi All
We are planning in SNP in base unit of measure EA.But we want STO to be created via TLB in unit of measure CASE.
Is there is any way so that when we create STO it will create the same in alternative unit of mesure CASE in APO?
Or when STo get published to ECC it will convert to unit of mesure cases?
I have already maintained ordering unit of measure in ECC at destination location but it is useful for normal Purchase orders not for STO coming from TLB.
Thanks
Hrishikesh

Hi,
You can create new Planning area with UOM as CASE.
In SNP Global setting, change TLB UOM as Planning Area.
EXecute TLB in this planning area.
We have done similar setting.
Do let me know if you need any help on this.
Vipul Shah

RWBE and changing Alternative Units of Measure

Hi
I'm trying to use RWBE to view the stock holding of multiple materials. I want to change the base unit from Ea's to TON's for all the materials in the list however it seems that I can only do this one at a time for each material in the list. If I change the list display to the "Tree Structure" I get an ABAP dump when attempting to convert all the items at the same time.
Can this be done using RWBE or is there an alternative report which can be used.
Thanks in advance
FYI- MMBE is not an option since I need to view materials u201Cen massu201D

Hi,
To Check the available unit of measures or to create below gfiven the Path
SPRO->General Settings->Check Uuits of Measurements
Please check whether Alternative Unit of measure is maintaind.
Regards
Reward Points if useful

Mass upload of Alternative unit of measure using MASS

Hi All,
Can some one guide me how to upload alternative unit of measure using MASS Transaction - can you elaborate like fields to be considered also, as I am trying using MM17 but could not go further.
Thanks,
Vengal Rao.

it is possible to create alternative units using MM17. But I would not use the word upload in that matter, as you cannot upload from an external file.
start MM17-
select table MARM and execute
you see 2 tabs,
you are at the Change record tab, please set indicator for do not change existing data, then go to the creation tab
enter the material number and the alternative unit you want add .
then execute
Now you see your material number, the new unit and the material description
click the icon for field selection and add the field nominator and denominator (and all other fields where you usually enter data) to your shown fields.
enter the value of your choice and save.
if you want add the same value for nominator and denominator to all the materials listed, then enter the value in the fields that are listed above the listed materials. then click the header title above all fields that shall be distributed followed by the mass change button. Finally press save button.

Creation of Inspection lot in Alternative Unit of measure

Dear Guru,
Our implementation is going on in a Tube manufacturing company where Base Unit is maintain in KG & 100 % visual inspection is taken place & we accept or reject tube on Pieces. So how can we do this in SAP, Because in SAP Inspection Lot is created on Base Unit & UD (Stock Movement) also in base unit, How can we in corporate Alternative Unit of measure.

Hi,
      1. give unit of conversion in MM basic data (Unit of measurement) say 1 kg = 10 pieces
       2. add unit of issue as a Pieces in MM QM view
        3. add in inspection paln Unit of measure as Pieces ( if possible )
Now during stock posting post the stock KG and now see in stock MMBE by changing the UOm as a pieces you will get the stock in pieces and you can now issue the material in pieces too.
Experts pl guide if i am wrong anywhere

Sales Information System (SIS) Reporting- Alternative Units of Measure

Guys,
Does anyone know how can we view SIS Reports (either using Standard or Flexible Analysis) in Alternative Units of Measure? Currently, all the quantities (example Order Quantity) are displayed in Base Unit of Measure .
Thanks a Lot

Hai john ,
If i copy the mc.1 to make -Z report in this how can i view the stock in alternative units as Kgs..But in master datas we maitained as BUM-Nos . For the same material master we are maitaining in additional datas as 1000 nos =40 kgs, if i take the report system will calculate the current stock with the AUM as kgs .for this pls suggest ie have 1000 nos stock if i choose AUM it should shows as 40 Kgs .How to make program for calculating formulas.PLs reply me asap
Thanks in advance
viswa

Create IDOC for alternative unit of measure

Similar Messages

Maybe you are looking for