Create in S_ALR_87012284 one variant default

Hi specialist
I would like to call the transaction S_ALR_87012284 and if it is possible appear with one variant by default.
Is it possible?
Thanks

First create the Variant through S_ALR_87012284
Process
1. Fill all the requirements
2. go to "Menu bar" -> GO TO -> Variant -> Save as Variant.....give the Variant name and save
3. again go with T Code S_ALR_87012284
Now, "Get Variant"option is there, side by Execution button, cal the Varint which you have created and execute
Thanks

Similar Messages

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Help

am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support

TS3989 Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

You are posting in the "icloud on my mac" forum, but your profile mentions Windows. If using a mac, you need to have iphoto or aperture installed in order to receive new photos via photo stream. If using windows, try posting in the iCloud on a PC forum. You'll get better help there.
https://discussions.apple.com/community/icloud/icloud_on_my_pc

There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel

I just installed Window 7 professional in place of Windows 7 Ultimate RC to which I subscribed. I was not pleased to do a clean install as opposed to an upgrade and was not informed about it.
When I reinstalled Office 2007, my outlook does not work, although exchange on the web works. I get the following error message:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel

Louis,
This issue may occur if the Outlook registry key is corrupted. When other programs try to use the Outlook Simple MAPI interface, they cannot retrieve the required information from the registry.
You must first remove the corrupted Outlook registry key, and then perform a Detect and Repair operation to have Outlook rebuild the key. To do this, follow these steps:
Click Start, and then click Run.
In the Open box, type regedit, and then press ENTER.
In Registry Editor, locate the following subkey in the registry: HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
Select the subkey, and then press DELETE.
Click Yes.
Quit Registry Editor.
Start Outlook.
On the Help menu, click Office Diagnostics.
Follow the instructions on the screen to complete the repair.
Important: Above section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows.
Hope above information helps.
Pooja Katiyar

When running setup, I get"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel.

whe I try to install Firefox 4.0.1, I get a Red X message. ""This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel. Is there a fix?

I Did that. When I try to install, I get the same message. I have come to believe this is a windows 7 or IE 9 problem. I also have active X problems that I can not resolve. I can not open Gmail also

Create a new costing variant or use a existing one

Dear Friends,
Company XYZ does not use absorption cost.
In Company Code 1000, Costing variant XY does not do any calculation because zero values are entered in acitivity type,costing sheet.
For new company code 2000 &3000, Users want to enter values at activity,costing sheet etc.
I like to know the following,
Should we use the existing costing variant XY OR Create a different cost variant for Company code 2000&3000.
Regards
Sridhar

You can use the same if your Valuation Variant is gonna remain same
entering act prices is part of master data which is independant of Costing var

Cannot update published website without errors: requires deletion of site, then creating a new one.

Hello all,
This has been a long persisting issue since we purchased Muse in January 2013, but has since then led to a shutdown of my office's website and email in September. Multiple support technicians were eventually able to restore the website, as well as our email function, but the core of the problem lies in the fact that when I update my website, it becomes entirely scrambled, and the only solution provided to me right now is that I need to delete my site completely (through Adobe Business Catalyst) and then create a new one, while transferring over the same domain information. I have yet to receive guidance on how to resolve this issue properly:
September 06 Email: detailing the series of events
Good evening, Zak,
I am reluctant to bring this to your attention because of the comprehensive nature of the following, but I have been told that my absolute last effort should be to contact you with what has been a persistent problem since the last time we had mediated this particular issue. Essentially, when publishing a website multiple times, sooner than later the format becomes scrambled when viewed online. I am being told I am the only customer known to have this issue, and that it needs to be investigated deeper.
This is a blurb from our original conversation in March 2013:
(The whole thread may be found at the following address: http://forums.adobe.com/message/5653912#5653912)
9.Zak Williamson (Adobe),
Mar 12, 2013 4:03 PM in reply to essbarr
I'm also puzzled. This isn't a problem I've seen before for a site published to Business Catalyst.
Please try publishing again, this time to a new temporary site (they're free). You can choose this option under More Options in the Publish dialog. I'm curious whether publishing to a new empty trial site works.
If that doesn't work, please send me the .muse file at [email protected] along with a link to this thread. If the file is larger than 20Mb you can use a service like Adobe SendNow, SendThisFile, WeTransfer, Dropbox, etc.
Thanks.
10.essbarr,
Mar 13, 2013 6:49 AM in reply to Zak Williamson (Adobe)
Hi Zak,
I published the website to a new temporary site, and it worked beautifully. Now I just have to fuss with the horizontal bar, and then I'll be super happy. Thank you for your help!
Sincerely,
Sarah
Since this bit of advice, I have freely published to a new temporary site every time the website gets scrambled. I have had temporary websites titled:
argponline01.businesscatalyst.com
through
argponline15.businesscatalyst.com
along with a bunch more than I cannot recall.
and Muse files titled:
argp-uc.muse
argponline.muse
argponline_02.muse
through
argponline_05.muse
argponine_3A.muse
argponline_3B.muse
and currently, my file name is
argponline_4.muse (dropbox link)
I am using Muse on a Mac Powerbook, OSX 10.8.4.
I don't know how much of the above is relevant, but maybe it makes a difference to you.
The timestamp on the following thread says September 5th, 2013 4.50AM, but I really sent it the evening of September 4th, 2013. No difference anyhow:
http://forums.adobe.com/message/5653912#5653912
What was going on in detail:
1
I made a few changes to my argponline_4.muse file on September 4th, 2013.
The published website at that point was argponlined.businesscatalyst.com (D).
The domain name was argponline.com .
(D) was published probably about two months previous, maybe longer ago.
When publishing (D) on September 4th, 2013, the website appeared scrambled.
I tried to publish only modified files, as well as publish the entire site, as well as close programs, and restart the laptop.
I decided to follow the advice given previously, and I published and launched argponlinef.businesscatalyst.com (F).
2
At this point I have two bookmarked websites for Adobe Business Catalyst Admin Consoles.
For (D), the Admin Console address was argponlined.businesscatalyst.com/AdminConsole/#!/Admin/Websites.aspx
For (F), the Admin Console address was argponlinef.businesscatalyst.com/AdminConsole/#!/Admin/Websites.aspx
I was able to sign into both.
When signed into the Admin Console for (F), I tried to Add a New Domain, but was told that I only had a plan for one hosted website through Adobe Business Catalyst, and that I would need to purchase a plan that offered more hosted websites.
I signed into the Admin Console for (D) and deleted the domain, but given the option to keep associated files just in case, I opted yes, to keep them.
When signed into the Admin Console for (F), I tried to Add a New Domain, but received the following error message:
Domain already exists. Please delete all records associated with this domain before re-adding it.
There was nothing visible though the Admin Console for (D) to delete the associated records, so I deleted site (D) in its entirety.
I continued to try to Add a New Domain for (F), but continued to receive the same error Domain already exists...
3
At this point (the morning of September 6th, 2013) we have the following set of parts:
The published and launched site is argponlinef.businesscatalyst.com (F).
For (F), the Admin Console address is argponlinef.businesscatalyst.com/AdminConsole/#!/Admin/Websites.aspx
The website is now completely down, and I have disrupted email service for the office.
I chatted with Lokesh, who determined this was a technical issue, and I was forwarded to Anshul.
Anshul's assessment is as follows:
Anshul: I see the error, Sarah it seems there are some Domain traces left with the system , I tried to clear then out and I am getting errors as well. In this case , we might need to escalate the case to higher level to have deeper investigation related to this issue.
Anshul: Sarah, the issue is the domain not the site. It seems like there are some traces related this domain in the backend. This issue is more of related to BC and not Muse. I will have this issue escalated and checked with the team and request them to run internal queries to clear the traces and then you should be able to add the domain.
4
Soon after I received the following message from Matt Baracz:
Matt Baracz (Adobe Business Catalyst Support)
Sep 06 10:50 (EEST)
Thank you for contacting us.
I have escalated this issue to our engineering team and have requested them to clear any references to the domain argponline.com from our database. Once cleared, you will then be able to re-add the domain successfully to your site.
As soon as I receive a response from engineering confirming that this has been actioned, I will let you know directly via this support ticket.
Regards,
Matt.
Around 3 or 4pm, I had not heard anything back, so I attempted to Add a New Domain through the Admin Console for (F). (Turns out Matt works in Australia, and was unable to alert me due to the time zone difference. Understandable!)
This was done successfully, so the website began to work again, but the email was still down.
5
I began a chat again, this time with Srividya. I was transferred to technical support and began conversation with Sanjit. The length of our conversation was probably around 3 hours, and I am so grateful for the time he put in. What a great guy.
He stated that he had gone through the case details and that Engineering had fixed the issue. We spent some time coordinating the Site Domain information through the Admin Console for (F). Ultimately, email is still not working (settings were probably updated around 5pm), but I understand sometimes it takes a while. Just wanted to note, the last time I updated the email settings it worked within a couple minutes. Varying lengths of time are expected, but I am still curious what effects those variations. Regardless.
6
The current situation is this:
My boss is a bit steamed that our website was down for a day and a half, and that our email is down for a relatively indeterminate amount of time. It's bad for business, and ultimately, I am responsible for these disruptions. I am incredibly concerned that the next time I update our website there will be a slew of problems, which have the potential to knock down service for the website and email again. I am desperate for a surefire way to simply and fluidly update our Adobe Muse website to Adobe Business Catalyst without making the same mistakes again.
I don't believe I did this the right way. I looked at FAQs, Community Forums, goDaddy Support and anything I could lay my eyes on to try to do things properly, but managed to make a few well-intentioned blunders. I continued to try undo the damage I've done in the past couple days, and with utter frustration, have not been able to fix them on my own. The people who have helped me thus far have done an amazing job, but ultimately, I am happier when I am not taking up their time, or panicking here.
When I first launched the website a few months ago, there was a step-by-step process that took me through every single action with screenshots included when appropriate. It was exponentially helpful. I was so lost without it this time around, and I was wondering if I could access it again in the future if needed.
The following is a blurb from my conversation with Sanjit tonight:
Sanjit: You have purchased Muse subscription , correct ?
Sanjit: or Creative cloud >
Sarah Rushing: Yes, we purchased Muse for 1-year, as well as Business Catalyst for 1-year
Sanjit: Perfect
Sanjit: With Muse you get 1 free site , so once you create a site and then publish to BC. In admin console you launch the site, that makes your free count used. Now if you create another site, then system asks you to upgrade the site to a paid site plan. ut when you delete the previous site then the free count becomes free and can be used for any other site
Sarah Rushing: Yes, that is what I did. Is this what I need to do each time? Because I am concerned that the email and website will be disrupted every time I need to make slight adjustments to the website?
Sanjit: No, you dont need to do that everytime. If the site is scrambled everytime you publish then please report to us. Thats not the ideal way for solution.
Sarah Rushing: Well Sanjit, I can tell you right now, that is how it has been functioning since we bought the program. I am not entirely certain, but I believe we bought Muse and BC in January.
Sarah Rushing: I can absolutely guarantee you that the site will inevitably scramble. Am I the only customer you have heard of to have this issue?
Sanjit: Yes, i have not seen any other reports for this issue
Sanjit: Well this needs a deep investigation
Zak, anything that you could offer for clarity of process, would be incredible. I don't know if you will have time to look at this before Monday, but I can tell you I will be available at a moment's notice to fix this issue and to learn anything about Muse and Business Catalyst that you have to offer. Thank you for your time, and I hope you have a wonderful weekend.
Sincerely,
Sarah Rushing
I'm concerned that no one will really read this because it is so detailed and boring and comprehensive, but it is absolutely critical that I find a proper solution before the next update to the website. Thank you so so much to anyone who can possibly provide some insight into this issue.
Sincerely,
Sarah Rushing

In case anyone is experiencing the same issue, I am trying this today.
Sachin: Okay Sarah, so is it everytime you try to republish the website, it gets scrambled?
Sarah: Yes, that is correct. And the solution thus far was to publish to an entirely new site, meaning delete the existing one on Business Catalyst and transfer the domain information.
Sarah: The last time I did that I experience a slew of issues that resulted in no website and email for 4 or more days. My boss was very angry.
Sachin: Sarah, can you publish your site as a new trial site once.
Sachin: And provide me the URL.
Sachin: Then republish on the same trial site and let me check the results.
Sarah: If I updated the published site within the period of a day, it will be fine. It is when I update the next day or later than that, then the website appears scrambled. So I can create a trial site for you, but it will behave normally for now.
Sachin: Sarah, while republishing the site, did you select "Only modified file" or "All files" while publishing?
Sarah: I tried everything.
Sarah: I made a few changes to my argponline_4.muse file on September 4th, 2013. The published website at that point was argponlined.businesscatalyst.com (D). The domain name was argponline.com . (D) was published probably about two months previous, maybe longer ago. When publishing (D) on September 4th, 2013, the website appeared scrambled. I tried to publish only modified files, as well as publish the entire site, as well as close programs, and restart the laptop. I decided to follow the advice given previously, and I published and launched argponlinef.businesscatalyst.com (F).
Sachin: Okay. there is one more thing I would like you to try.
Sachin: Publish a site as a trial site.
Sachin: Then wait till tomorrow.
Sachin: After that login to the admin panel of the site.
Sarah: Okay
Sachin: There go to Site Manager>File manager
Sachin: There will be a file there named Muse_manifest.xml
Sachin: Delete that file and then republish the site from Muse.
Sarah: So in the Adobe Admin Console, underneath Site Manager, I see Web Forms and System E-mails. No file manager?
Sachin: Please hover the muse on your name at top right corner and click on My details.
Sarah: Okay, yes.
Sachin: Now scroll down and check the option that says Enable online content editing (incompatible with Muse)
Sachin: And then click on save.
Sarah: What does this do, and why does it say it is incompatible with Muse?
Sachin: It will help you see other options in BC.
Sarah: Okay, thank you.
Sarah: I see the File Manager now
Sachin: Okay.
Sachin: Now select the file named Muse_manifest.xml
Sachin: And use the delete button on the right side.
Sachin: but do it tomorrow
Sachin: With a trial site
Sachin: Not with the live site.
Sarah: Okay, could you please explain to me what deleting that particular file is supposed to do? I am just very interested in how this works.
Sachin: This file contains the information about your last upload.
Sachin: Deleting it will make sure that "ALL" the files are uploaded again from Muse.
Sarah: Okay, so:
Sarah: I will publish a trial site.
Sarah: Wait until tomorrow.
Sarah: Publish again. If I have an issue, I can log-in to the admin console for this particular trial site and go to Site Manager --> File Manager, and delete muse_manifest.xml.
Sachin: I will create a case for you and you can respond to the case.
Sachin: Correct.
Sarah: After that, I will try publishing again and see if it resolves the issue.
Sarah: That would be great, thank you Sachin.
Sachin: Thank you for contacting us. Have a Good Day!

I was cleaning my macbook pro and i deleted all my files including itunes. Then when i turn on my itunes it says the folder"itunes" cannot be found or created, and is required. the default location for this folder is inside the "music" folder. help please

My itunes keep saying The folder “iTunes” cannot be found or created, and is required. The default location for this folder is inside the “Music” folder.iTunes needs a library to continue. You may choose an existing iTunes library or create a new one. please help i presschooseexisting cuase i have one but then it says this The file cannot be found or created. The default location for this file is in the “iTunes” folder in the “Music” folder. please help

I was cleaning my macbook pro and i deleted all my files including itunes
Restore your computer from your backup.

How can I create more than one main window in a page of SAP SCRIPT?

How can I create more than one main window in a page of SAP SCRIPT? If anybody helps me I will be obliged.
Regards,
Subhasish

Hi Ganguly,
It is possible to have more than one main window in a same page.
You create a main window and simply you copy and past it in the same page.. it will create first main window name as MAIN and other main windows as MAIN01,MAIN02.... up to MAIN99.
Contets flow from MAIN , MAIN01, MAIN02.......................MAIN99. contents after filling the current window it flows to next window(by default, you skip as well with some keyword not sure could be NEW-WINDOW)
you want print the main window data twice? or you want to create two main window in the same page ?
1. give two copies in the no of copies in the output type screen ( Which pop up is coming after excute the program ).
2. create two page with the same script form.
3. you can write the coding inside the program to print twice the same page.
Hope this information use full to you..

How to create transaction or screen variant for custom tcode in module pool

Hi,
I have one module pool program with custome tcode ,i want to create transaction or screen variant for this tcode.Next time when we run this tcode we need a variant for this tcode.
I tried by using of SHD0 but it is working only for standred tcodes.Is there any possibilty please help me.
thanks,
Lavanya.

Hi,
you created a Custom Tcode for ur module pool Pgm..if u execute the Tcode in the output screen give the input details and press Save Option then variant will be created. Then you can use that variant.
otherwise.. while creating a Tcode..
select an option for Tcode type Tranasction With variant ..there u will provide the variant for ur Tcode ( which is already created ).
Regards,
PraVeen.

Problem creating an association in the Default Programs control panel

I have AOL mail. I have typed a letter in WordPad that I want to send in an e-mail. I am receiving this message....There is no e-mail program associated to perform the requested action. Please install an e-mail program or, if one is
already installed, create an association in the Default Programs control panel....I have a very basic knowledge of computers, so please consider this when answering my question....I do not have any idea what to do.

Hi,
So we are not using office outlook to send e-mail here?
Regarding AOL mail issue, we'd better ask them here:
AOL community support
http://help.aol.com/help/microsites/searchEntry.do?tab=cs&searchString=how+to+send+text+to+aol+mail&radios=true&searchTitle=
For how to create an association in the Default Programs control panel, we could take a look in the thread below:
How do I create an association in
the Default Programs control panel of Windows 7?
Best regards
Michael Shao
TechNet Community Support

Create an association in the Default Programs control panel

I have set an application (.exe) in the right click menu by REGEDIT-shell , and when I click on it this message appear : This file does not have a program associated with it for performing this action . Please install a program or,if one is already
installed,create an association in the Default Programs control panel , so how can I run it succeffully??

Hi,
What's your meaning by REGEDIT-shell? executable application belongs to Windows application doesn't need any other default programs open it.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Need Help, how to create more than one rectangle from one button in one stage of canvas

Dear Guys,
I has problem to create more than one rectangle canvas from one button. here my role to create :
1. I create input size with textfield
2. I click button called "submit query"
3. My web will create a rectangle with specific size.
My problem come when I click again the button, my old rectangle has been remove than my new rectangle has created.
My question is : how I can create more than one without delete/remove the old I was created?
Here my Code :
<head><meta http-equiv="Content-Type" content="text/html; charset=utf-8" /><link rel="stylesheet" type="text/css" media="all" href="css/style.css"><script src="kinetic-v4.7.2.min.js"></script></head> <body><label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5"><br> <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5"><br> <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5"><br> <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="5" maxlength="5"><br> <input name="submit" type="submit"> <script defer>              var stage = new Kinetic.Stage({                container: 'container',                width: 943.5,                height: 254.10              });              var layer = new Kinetic.Layer();              var rectX = stage.getWidth() / 2 - 50;              var rectY = stage.getHeight() / 2 - 50;                            var group = new Kinetic.Group({                draggable: true              });                                         var box = new Kinetic.Rect({                x: rectX,                y: rectY,                width: <?php echo ($_POST['panjang']/10)/1.3; ?>,                height: <?php echo $_POST['lebar']/10; ?>,                //fill: '#00D2FF',                stroke: 'blue',                strokeWidth: 2                //draggable: true              });               var simpleText = new Kinetic.Text({                x: Math.round(box.getWidth() / 2),                y: Math.round(box.getHeight() / 2),                text: '<?php echo $_POST['tinggi'].'/'.$_POST['nam_pac']; ?>',                fontSize: 30,                fontFamily: 'Calibri',                fill: 'blue',              });                                          // add cursor styling              box.on('mouseover', function() {                document.body.style.cursor = 'pointer';              });              box.on('mouseout', function() {                document.body.style.cursor = 'default';              });                            group.add(box);              group.add(simpleText);              layer.add(group);              stage.add(layer);            </script></body>
this is my printscreen may help you to help me :
thanks before to help me
Regards,
Prabowo.

It's work Ken, but if I modify your code into my code.
error again. they say like before (...is undefined)
May You want to check my code
<?php
include('pinambung.php');
?>
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>GI Loading Plan Maker</title>
<meta name="viewport" content="width=device-width" />
<link rel="stylesheet" type="text/css" media="all" href="css/style_2.css">
<script src="js/kinetic-v4.7.2.min.js"></script>
<script src="js/CalendarPopup.js"></script>
<script src="js/jquery-1.10.2.js"></script>
</head>
<body>
<header class="w" id="header"> 
      <img src="images/headers.jpg" width="100%" height="100%" />
</header>
<nav class="w" id="nav">
      <?php include('top.php'); ?>
</nav>
<section class="w" id="main">
      <section id="content">
      <article>
        <h2>Customer Info</h2>
        <form id="myForm" action="insert.php" method="post">
        <label>Customer Name :</label><input name="cs_name" id="cs_name" type="text" size="25" maxlength="50">
        <br>
        <label>Date of Shipment :</label><input name="shipment_date" id="shipment_date" type="text" size="10" maxlength="12" > use format : YYYY-MM-DD
        <br />
        <label>Container Name :</label><input name="con_num" id="con_num" type="text" size="10" maxlength="12">
        <label>Revision :</label><input name="revision" id="revision" type="text" size="5" maxlength="5"><br />
        <label>Prepared by :</label><input name="prepared_by" id="prepared_by" type="text" size="25" maxlength="50">
        <button id="saveinfo">Save As DB</button>
        <button id="saveall">Save As Image</button>
        <button id="print" onclick="window.print();return false">Print</button>
        </form>
        <span id="result"></span>
        <script type="text/javascript" src="js/insert.js"></script>
      </article>
          <br /><br />
      <article>
          <h2>Packing Info</h2>
        <label>Container Type :</label>
        40' HC<input name="con_type" type="radio" id="con_type" value="40hc">
        40'<input name="con_type" type="radio" id="con_type" value="40">
        20<input name="con_type" type="radio" id="con_type" value="20"><br />
        <input name="loadstan" type="button" value="Create Container" id="isSelect">
        <button id="removecon">Remove Container</button>
        <br />
        <label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5">
        <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5">
        <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5">
        <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="20" maxlength="55">
        <input name="loadstan" id="loadstan" type="button" value="Load Standard Packing" onclick="window.open('spk.php', 'winpopup', 'toolbar=no,statusbar=no,menubar=no,resizable=yes,scrollbars=yes,width=300,height=400');">
        <input name="submit" type="submit" value="Create Box">
        <button id="remove">Remove Box</button><br />
      </article>
    </section>
    <aside id="sidebar">
      <label for="layer-to-delate">Select a layer to delete or rotate</label><br />
      <select id="layer-to-delete" size="14"></select><br />
      <input id="delete-layer-button" type="button" value="Delete layer">
      <input id="rotate-layer-button" type="button" value="Rotate box">
    </aside>
    <section id="content2">
      <div id="container">
      </div>
      <script defer>
      function radians (degrees) {return degrees * (Math.PI/180)}
      function degrees (radians) {return radians * (180/Math.PI)}
      function angle (cx, cy, px, py) {var x = cx - px; var y = cy - py; return Math.atan2 (-y, -x)}
      function distance (p1x, p1y, p2x, p2y) {return Math.sqrt (Math.pow ((p2x - p1x), 2) + Math.pow ((p2y - p1y), 2))}
        var stage = new Kinetic.Stage({
            container: 'container',
            width: 943.5,
            height: 254.10
        var layers = new Array();
       function addCont(){
           layer2 = new Kinetic.Layer();
            switch ($('input:radio[name=con_type]:checked').val()){
              case '40hc':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 1190/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 40 HC (11900mm X 2300mm X 2550mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
                 case '40':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 1190/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 40 (11900mm X 2300mm X 2250mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
                 case '20':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 580/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 20 (5800mm X 2300mm X 2250 mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
        function addRect() {
            layer = new Kinetic.Layer();
            var box = new Kinetic.Rect({
                x: 10,
                y: 10,
                width: +(($("#panjang").val()/10)/1.3),
                height: +($("#lebar").val()/10),
                stroke: 'blue',
                strokeWidth: 2
            var group = new Kinetic.Group({
                        draggable: true,
                        snap : true
            var boxLabel = $("#nam_pac").val() + "/H : " + $("#tinggi").val();
            if (($("#panjang").val() && $("#lebar").val()) != 0) {
            var simpleText = new Kinetic.Text({
                x: 10,
                y: 10,
                text: boxLabel,
                fontSize: 12,
                fontFamily: 'Calibri',
                fill: 'red',
            } else {
                var simpleText = new Kinetic.Text({
                x: 10,
                y: 10,
                text: '',
                fontSize: 12,
                fontFamily: 'Calibri',
                fill: 'red',
            group.add(box);
            group.add(simpleText);
            layer.add(group);
            stage.add(layer);
            layers.push(layer);
            $("#layer-to-delete").append("<option>Layer " + boxLabel + "</option>");
        function deleteRect() {
            if($("#layer-to-delete > option").length < 1) return;
            var i = $("#layer-to-delete").prop("selectedIndex");
            layers.splice(i,1)[0].destroy();
            $("#layer-to-delete > option").eq(i).remove();
        function rotateRect() {
            if($("#layer-to-delete > option").length < 1) return;
            var i = $("#layer-to-delete").prop("selectedIndex");
            layers[i].rotateDeg(30);
            layers[i].draw();
        $("#delete-layer-button").click(function(e) {
              deleteRect();
        $("#rotate-layer-button").click(function(e) {
            rotateRect();
        $("input[type=submit]").click(function(e) {
            addRect();
        $("#isSelect").click(function () {
              addCont();
        $("#removecon").click(function () {
              layer2.destroy();
        $(window).keypress(function(e) {
            if(!$(document.activeElement).is("label")) {
                if((e.keyCode || e.which) == 46) {
                    layer.destroy();
            if((e.keyCode || e.which) == 35) {
                    layer2.destroy();
        document.getElementById('saveall').addEventListener('click', function() {
          stage.toDataURL({
            callback: function(dataUrl) {
                  window.open(dataUrl);
        }, false);
      </script>
    </section>
</section>
<footer class="w" id="footer">
    Copyright <a href="login.php" target="_new">©</a> 2013, <a href="http://omhanggar.com" target="_new">created</a><a href="http://intranet.guentner-asia.com" target="_new"> by PT. Güntner Indonesia </a>
</footer>
</body>
</html>
thanks again before,
Prabowo

How to CREATE SEQUENCE in one table

dear all
the one thing i want to know when i use CREATE SEQUENCE in one table like this and then at that table
CREATE SEQUENCE oproduct_sequence
START WITH 1 INCREMENT BY 1
nocache
create table oproduct(
tname varchar2(20) not null,
tid int default oproduct_sequence.nextval
the system indicat that i cannot use this way to create table , so i really want to know how can i achieve this method
becuase when i want to insert inot table oproduct only use
insert into oproduct valuse('aaaa');
and the result like
aaaaa 1
bbbb 2

Actual name is before insert trigger. Some examples are listed below:
Example Number 1 ...
create sequence product_seq start with 1 increment 1
create or replace trigger product_insert before insert for each row begin
select productseq.nextval
into :new.product_id
from dual;
end;
Example Number 2 ...
How to create an autoincrement field in a table with a sequence ...
SQLWKS> create table bob(a number , b varchar2(21));
Statement processed.
First create a sequence
SQLWKS> create sequence x ;
Statement processed.
Then create the trigger.
create trigger y before insert on bob
for each row
when (new.a is null)
begin
select x.nextval into :new.a from dual;
end;
Example Number 3 ...
First create a sequence:
create sequence emp_no_seq;By default it increments by 1 starting at 0.
Use its values when inserting data into the table:
insert into t_emp values (emp_no_seq.nexval, 'Joe Black');~ Madrid.

Create in S_ALR_87012284 one variant default

Similar Messages

Maybe you are looking for