Create index error after upgrade to 8.1.7.1

I recently applied the 8.1.7.1 patch to
my database. Now, when I try to create a
text index, I get the following:
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: interMedia Text error:
DRG-10516: failed to perform DDL operation due to an Oracle error
DRG-50857: oracle error in driddl.PolicyCreate
ORA-00001: unique constraint (CTXSYS.DRC$IDX_COLSPEC) violated
ORA-06512: at "CTXSYS.DRUE", line 126
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 78
ORA-06512: at line 1
I have done a drop force on the index in question, and it dropped without error. What
can I do about this>

Please look at some of the technical notes on http://webiv.oraclecorp.com about migration/patches.

Similar Messages

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Flash 9,0,124,0 security error after upgrade

I get the following error after upgrading my Flash Player
(after my system prompted me to install it while running the Flash
editor):
Internet Explorer has blocked this site from using an ActiveX
control in an unsafe manner.
I have uninstalled and reinstalled the player from the
browser, about 5 times now and it continues to be a problem for IE.
Works ok in Firefox if I manually download the FF installer. Is
there a standalone installer for Vista/IE7 or am I forced to use
the ActiveX installer which seems to have issues?

Fix: Removed both (!?more than one?!) versions of flash
player in my Programs and Features dialog, then ran
uninstall_flash_player.exe, reset IE7 to factory spec, then
reinstalled Flash from ActiveX. Seems to be working now.

Why are websites in firefox loading in an index mode after upgrading to mountain lion?

why are websites in firefox loading in an index mode after upgrading to mountain lion?

Hi Canes,
Sorry - not sure what you mean?
GB

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

Hi,
I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after 'Patch' is complete."(ERREUR02.jpg). How can I change this status?
Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
Thanks for your help.

Thanks Tammy for the reply
We already tried the suggested SAP Note couple of time without any luck.
Regards,
SJ

Error after upgrading from sap b1 pl 35 to pl 49

hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
Jenny

Hello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

Imac error after upgrade to 10.8.4

I received an error after upgrade tp brand new imac. Error was upgrade was not installed. Upon reboot the version of SW in About thi Mac is 10.8.4. Bug?
iMac i7, 21.5" 16GB memory, fusion drive.
Thanks for input. I assume the upgrade took.

Verify Permissions gave me some errors, I deleted the repeats and the permissions fixed lines:
Repairing permissions for “Macintosh HD”
Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig” has been modified and will not be repaired.
Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.
Warning: SUID file “usr/bin/quota” has been modified and will not be repaired.
+++ (multiple repairs)
Permissions repair complete
I verfied the HD
Much text (removed)...
The volume Macintosh HD appears to be OK.
I also loaded the Apple downloads version of the upgarde and received the following (again):
The Installation failed
The insatllation encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Message was edited by: Steve51K

Build error after upgrading from 8.2.1 to 8.5 "Error 1055 occurred at Invoke Node..."

After upgrading to 8.5, I'm getting the following error when trying to build an EXE:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1055 occurred at Invoke Node in AB_Source_Library.lvclass:Close_Reference.vi->AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: Object reference is invalid.
I have been building this application for both Windows and Mac OS, and I even get the same error when building the .app on an Intel Mac.
Things that I've already tried:
* Mass-compiling all my code
* Created the project from scratch
* Enabled each panel of the "diagram disable structure" one at a time and compiled again
Any ideas?

Hi Travis,
Ben’s advice if definitely the best place to start. Error 1055 is a very general LabVIEW error for “Object reference is invalid.” The cause is usually a bad install where important LabVIEW function aren’t placed in the right directory or aren’t installed at all.
Charlie M. CLD

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

ARM approval error after upgrading to SP14: Database error while using the secure store.

Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
Gustavo

SAP just delivered a note to fix this issue. The number is 2022294.

Webdynpro error after upgrade NW04 to NW04s sp9

Hi,
I created some WD in NW04 using JDI. After upgrade to NW04s i got error messages in the program. The messages look like:
Error com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeInfo cannot be resolved (or is not a valid type) for the argument stateChangeInfo of the method wdDoApplicationStateChange LeaveReqComp.java OJL_TEST_Dpoczelfbedwebdynreqbelastingdienst.nl/gen_wdp/packages/nl/belastingdienst/zelfbed line 203
Hope somebody can help me solve my problem.
Kind regards,
Maarten.

Hi Maarten
I am also facing similar sort of problem when i am trying to import the local web dynpro DC into 2004s that was build n exported from 2004 and when i try to build it in 2004s i get error
com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeInfo cannot be resolved for the argument stateChangeInfo of the method wdDoApplicationStateChange
com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeReturn cannot be resolved for the argument stateChangeReturn of the method wdDoApplicationStateChange
were u able to solve the problem if yes please help me in that case
thanks !
Asif

Reporting Error After Upgrading to SCCM 2012 R2

After upgrading from SCCM 2012 SP1 CU2 to SCCM 2012 R2, some users receive an error whenever they open a report. This occurs in both the SCCM console and the SSRS web site. What's odd is not all users receive the error. In fact, for two
users with the exact same permissions, running the console on the same computer, 1 gets the error and the other doesn't. Anybody else see this or have any ideas to troubleshoot or fix it? I'm thinking this may relate to the fix for permissions
in reporting included in R2.
The error message from the console is:Microsoft.Reporting.WinForms.ReportServerException
The DefaultValue expression for the report parameter ‘UserSIDs’ contains an error: The user name or password is incorrect.
(rsRuntimeErrorInExpression)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
The following error is logged in the SSRS logs:
processing!ReportServer_0-1!12d0!10/31/2013-15:28:48:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Exception of type 'Microsoft.ReportingServices.ReportProcessing.ReportProcessingException' was thrown.;

I just wanted to share my last upgrade experience with you, in case, someone is running into the same problem:
I've just upgraded to SCCM 2012 R2 CU4 (from CU3).
Guess what? It broke the Reporting, error message as above!
So I've put the computeraccount of my SCCM/SSRS server (SSRS service is running under local system account) into the WAA group, reboot - but it didn't help. Tried also the Pre-Win2000-Compat-group. Didn't help. A colleague was not experiencing the problem.
Hmmm. So what is different between our accounts?
The difference found: My account's userPrincipalName was set to the same as the sAMAccountName, but missing a domain. The account was obviously created by a bad script.
Solution 1: Delete the userPrincipalName attribute, or
Solution 2: Make the userPrincipalName complete by adding a valid domain, i.e. [email protected]: In the Active Directory Users and Computers mmc, User Properties, Account tab, select a domain for the "User logon name".
The problem seems to be only for user accounts, that are in a different domain than the SCCM server's account, i.e. server in example.com, user account in sub.example.com. Always multi-domain problems...
Thorsten Lau - IT-Lösungen http://blog.system-center.de

Konqueror error after upgrade

I upgraded my system today, and when I try to browse website with konqueror it gives me only this message back:
konqueror: ERROR: : couldn't create slave : Unable to create io-slave:
klauncher said: Error loading 'kio_http'.
Any suggestions?

Today I upgraded KDE to 3.5.3 but server wasn't completly sync, so there was no new openssl package. I had same problem as you, so I checked if kio_http.so file is in my system, and it was. Next thing I checked was ldd kio_http.so, and I noticed that libcrypto.so.0.9.8 was missing (this is a file from openssl package). I have manualy downloaded new openssl package, and after upgrading it, kio_http error was fixed.
So it should work in your system too. Maybe you should restart KDE or do "ldconfig /opt/kde/lib/kde3"

Create index error after upgrade to 8.1.7.1

Similar Messages

Maybe you are looking for