Create Index fail in process chain

Hi Friends,
I have a process chain in production system which loads inventory data everyday at 6:00Am.
2 days back R3 production system failed and the data is not loaded into BI. It was stopped at Delete Index step. I have started again by selecting Repeat then it worked and the infopackage is also executed successfully.
After that it is failed at Create index step and giving message " Job cancelled after system exception ERROR_MESSAGE". Till then it is giving same problem everyday.
Could you guys help me how to solve this and execute the chain successfully.
Thanks & Regards

Hi,
Try to create index for the cube manually i.e got info cube , Right Click -> manage->performance-> perform check index - if red do repair index, if it will not help then create index. After that run it though process chain
Hope it will resolve your problem.
Sangita

Similar Messages

How to create info area for process chains?

How to create info area for process chains?

Hi,
If I understand your question clearly, you want to assign display componets.
once you have created you chain you assign the components by clicking CTRL+F11
Regards,
Namrata

Code to fail a Process Chain

Hello everybody,
I am using a ABAP Program in a Process Chain ( Chain of Processes that load data to the BW Cube). I do some check in the Program. If the check is OK, then I will continue with the Process Chain. If the Check Fails, then I should fail the Process Chain.
How do I accomplish this? If you can give me Piece of code, that will be very helpful.
Thanks in advance.
Shameem

Hi Shameem,
Plss Set the value of the sy-subrc to a non zero value so that the ABAP program step in Process Chain turns RED and Hence the Process Chain will stop.
Shreya

How to create process variant for delete index in a process chain

Respected all
I am creating a process chain, but unable to create process variant for the delete index. kindly tell me the
step by step proceure for creating the variant for delete index. also if we use variant which is previously prepared then will it be safe? will it affect the other running process chian.
pls reply
thanks
abhay

Hi,
Please do not use an already created variant for index deletion. It might delete indices of some other cube.
You can follow the following steps -
1. Open the chain in Edit mode and click on "Process Types" button
2. On the Left hand side you will have various process types. Choose "Data Target Administration" and expand it.
3. Choose the first process "Delete Index" (it will be marked with a trash bin sign) and drag it to your chain
4. It will ask you create a variant. Press the create Button
5. In new window enter the Process Variant technical name and description
6. Then in new window choose Object Type = Cube through dropdown and Object name via browsing. After choosing the cube name click on "Transfer Selections"
7. Save and return to your chain
8. It will automatically generate a create index step also after delete index.
9. You need to break the link between create and delete step and insert infopackage in between to get the following steps - delete index --> load cube --> create index.
Please let me know if this is helpful..
Regards
nishant

Delta Failed in Process Chain

Hi BW Experts,
Our MM process Chain (Transaction Data)is running daily at 11:55PM in the night time.
But today it is still running. I know this process chain will be failed . If we do not solve the issue today, delta package will not run tomorrow. Is it correct?
Please give me the solution.
Thanks & Regards,
Anjali

Hi,
This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
It is a system error which can be seen under the Status tab in the Job Over View.
Pls assaign the points if possible.
Regards,
Raghavendra Rao.Kolli

Error "Lock not set for: Generate index" while running process chain

SAP BI 7.0
SP 17
I am attempting to run a new process chain and the generate index steps are failing with the below errors:
"Lock NOT set forGenerate index"
"RSSM PROCESS INDEX terminated, because InfoCube/DSO object could not be locked."
The process chain just pauses. I let it finish once and it took 2 hours and then it gave the failure messages. I have looked in sm12 and can see the lock records when the process chain is running - unfortunately I can't make much of what's there - everything looks good to me. I also tried creating the indexes manually inside the cube and then re-ran, but still get the same error. Before running the process chain, I can get the indexes to check to green, but then after running the process chain they go back to red. I have attempted many things (including looking at other forum posts), but I still have the error. Please help. Thanks
Edited by: Brett Hutchinson on Feb 10, 2009 7:50 PM

Hello,
So Create index is getting failed in you PS right?
1)check if any other loads are running to the same CUBE(May be from other PC's also)
Goto Manage of the cube and check, some times it may happen if any Loads are running into cube I mean Load/DTP & roll up may be running.. if so wait till the others Loads(Jobs) get complete then Repeat the failed index
2) If the Create index is running for long time, then got RSDDV--> Select the CUBE then click on BIA index(Maintenance wizard), you can see a message if indexes are running , this will happen only when some one would have tried to generate the indexes manually and it may got failed due to some reason , since u are running it manually u couldn't identify whether it got failed or not unless you got to RSDDV and check. So delete the index here and then rebuild them through PC
Hope it helps!

PSA Deletion Process failed in Process Chain

Hi..I have a bizzarre issue...
I have created one process step in Process chain for deletion of PSA data of a particulur data source(o days).Every setting is fine.
Except for it fails and gives message:
Data inconsistency; Partition /BIC/B0001723000 not deleted
Then I do the repeat in Process Chain and it completes successfully.
Can anybody throw some light??

Hi,
Go to se14 and adjust it - /BIC/B0001723000
thats it,
Best regards,
dushyant.

Indexes Error n Process chains?

Hi,
I get an error in the "create Index" in Process chain for a cube.
Error says " Creating/Deleting index not allowed for that infocube"
The same Process chain ran fine before..But the problem occured only this time.
Any info on this please..
Thanks,
Sai.

Wat exactly do i have to look in DB02.
I clicked on missing indexes..and it shows as 20 missing secondary indexes on the same infocube..
Is that causing problem..If yes then how do i correct it..
Thanks.

DTP failed in process chain...

Hi All,
Process chain of master data got failed in DTP, the error message is :
" Second attempt to write record "XXXXXXXrec number XXXX" failed. "
waiting for the reponse.
Regds,
Zakir

HI Zakir,
Dont check the option Handle duplicate records.If iam correcti thik you are trying to load the master data again by deleting the data.When you tried to delete the data the complete data may not have deleted.
First Alternative:-
Iknow you may not have authorisation for se14 if is is there please delete all the P ,q and M tables in SE14.Then try to load the DTP
Second:-
If you open the monitor of the failed DTP and go into the details tab and drill the erro and when you right click on of the step on one of the failed step there you will set keydate/timestamp select that and then delete the request activate the DTP again and try to load.
Third:-
Its better to delete the DTP and Create it once agian.
let me know if it has worked.
Regards,
Vikram

Short Dump created while modifying a process chain

Hi guys ,
Iam getting a short dump while trying to modify a process chain and it is taking me too short dump where the message is PROCESS HAS NO PREDECESSOR but even when Iam trying to DETAILED VIEW it is taking me too short dump
Can anyone help me out of this issue

Hi ,
I have removed the existing start process and I have checked but there is no Use the same short dump is created again
Please suggest me some usefull solution .

ABAP program fails in process chain -'ABAP/4 processor: DBIF_NTAB_SQL_ER

Hi Experts,
I have an ABAP program in process chain. It frequently fails in the chain .
When i do repeat on it will run fine.
Purpose of the program is to delete the content from open hub table.
I can 'ABAP/4 processor: DBIF_NTAB_SQL_ERROR' .
What could be the reason . How can i give permenant fix to it.
Thanks in Advance

Hi,
It looks like database error, speak to your DBA/Basis to get it resolved.
regards
Vikash

Info Package failing in Process chain

Hi,
One delta load InfoPackage fail every time in process chain with error message "Last Delta upload not yet completed".
Actually this infopackage load data in cube but in procuress chain log, it turn red and in the display message window, under tab "Chain" the request id is not the one which loaded data but different one.
This issue is delaying the upgrade and URGENT in nature.
PLEASE HELP....
Regards,
Anil

Hi Anil
You are trying to complete a delta load while the previous one is not finished. Please check the monitor for the previous load. You can use the manage tab to set a load to completed, or you can delete the load.
If its hung (yellow) or in red goto the QM status in monitor and mark the QM status red. Then goto the data target and delete red request.
Go back to the delta infopackage and schedule the job again. this time it'll prompt you for a repeat delta. Click OK and the delta load will start again. This'll bring the data for the old failed delta as well as any changes or new records as well.
Hope this Helps
Anand Raj

All 8 ODS loads are failing in Process chains

Hi Experts,
Today in Production ,all 8Z<ODS> ( eg. 8ZSD_O51, 8ZSDC_53,8ZCOPABC02.......) giving same error in Extraction .
It is "Error occured in data selection" in Extraction tab in details tab in RSMO.
We are correcting these loads by deleting this red requests from data target and running the Infopackage manually for repeat of last delta.when we run infopackage manually it doesn't fail.but it give above error while loading in Process Chain.
So in our Batch we have around 30-40 loads of this type( 8Z load).So to run each info package manually it is time consuming process??
So pls give suggestions to correct this error.....
How can we fix this problem........
the error is coming only after some support pack installed in BW two day before.
Thanx in advance...

Hi,
are you In DEV or Prod? If in prod, did you have this behavior in your DEV sys as well after applying your SP?!?
try replicating your "myBW" datasources and reactivating your transfer structures;
Try first with one of it; test and see if this works; then run RS_TRANSTRU_ACTIVATE_ALL to activate all your transfer structures.
hope this helps...
Olivier.

DB statistics failed in Process Chains

Hi BI Experts,
We are maintaining 6 process chains in our system.
Today every job was running successfully.
But in every process chains, the DB STATISTICS are failed.When I check in the performance tab , it shows green.
So i could not solve this problem.
The log message is:
    The exception 'CX_SDB_ORA_PROGRAM_ERROR' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_SDB_ORA_UPDATE_STATS=======CP' has to be
    terminated.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Anjali,
Check the OSS Note 998904 - Statistics check shows red or yellow traffic lights.
I am pasting the contents of the Note here:
Symptom
After an update statistics run, the check (in transaction RSRV or transaction RSA1--> Manage) continues to show yellow or red traffic lights.
Other terms
RSDU_ANALYZE, analyze, statistics, yellow traffic light, red traffic light, performance, RSRV, incorrect statistics, manage
Reason and Prerequisites
This problem is caused by a program error.
Solution
The check for current statistics on InfoCubes contains a static time query and as a result of this, statistics are incorrectly displayed as 'not current'. This is just a display problem. After an update statistics run, the statistics are actually up to date.
SAP NetWeaver 2004s BI
           Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Before you implement an advance correction (if one exists and you want to implement it), see Note 875986. It contains notes regarding the SAP Note Assistant. These notes prevent problems during the implementation.
Bye
Dinesh

Rollup process failing in process chain

Hi All,
Daily the rollup processin in our process chain failing due to the fallowing error
"ORA-01400: cannot insert NULL into
("SAPBIW"."/BIC/E100093"."KEY_100093U") "
But once we repeat the rollup process in the process chain it is getting successfull.
Can you suggest solution for this error.
Thanks
Suneel

Hi Suneel,
As correctly mentioned by other to check logs and PSA data, you shour also check notes available on this error.
Probabaly some data in a field is causing this error, so need to analyize the values which are coming.
There are few notes on this:
ORA-1406 error/ ORA-1400 Cannot insert NULL
SAP Note Number: 211617
Hope it helps...
Regards,
Ashish

Create Index fail in process chain

Similar Messages

Maybe you are looking for